Embedded devices in pipelines and equipment for installation of instruments and automation equipment. Guide to the choice of means of strengthening holes
Закладные устройства в трубопроводах и оборудовании для установки приборов и средств автоматизации. Пособие по выбору средств укрепления отверстий
Status: Effective - Introduced for the first time
The manual allows you to determine the need for the use of means to strengthen the holes in the design and installation of selective devices, as well as the dimensions of the elements of the means of strengthening the holes (nozzles). The manual is applicable to strengthen the holes in the process piping, pipelines, utilities, etc. with an internal diameter of 25 mm and above. Estimated working pressure - up to 100 MPa. The material is designed for the use of carbon and alloy steels.
Пособие позволяет определить необходимость применения средств укрепления отверстий при проектировании и монтаже отборных устройств, а также размеры элементов средств укрепления отверстий (патрубков). Пособие применимо для укрепления отверстий в технологических трубопроводах, трубопроводах инженерных сетей и др. с внутренним диаметром 25 мм и выше. Расчетное рабочее давление - до 100 МПа. Материал рассчитан на применение углеродистых и легированных сталей
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS166890
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Installation and special construction works »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.040 Industrial automated systems »
25.040.01 Industrial automation systems in general »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.01 Electrical wires and cables in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
The Document References:
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 22897-86: Seamless cold-deformed pipes from alloys based on titanium. Specifications
GOST 24755-89: Vessels and apparatus. Norms and methods of strength calculation for openings reinforcement
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
OST 26-1046-87: High-pressure vessels and devices. Norms and methods of endurance calculation.
RD RTM 26-01-44-78: Piping Components for Use at Pressure Above 10 to 100 MPa. Strength Standards and Calculation Methods
SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
SNiP 2.04.12-86: Steel pipelines strength analysis
SNiP 3.05.05-84: Processing equipment and process pipelines
SZK 4-1-93: Instruments for measuring and regulating temperature. Part 2. Installation on plastic pipelines
SZK 4-2-93: Instruments for measuring and regulating pressure. Part 2. Knot of strengthening of an opening in the technological pipeline
SZK 4-4-90: Instruments for measuring and regulating the level. Installation of embedded structures on tanks. Knots and details. Part II
SZK 4-4-92: Instruments for measuring and regulating the level. Installation on the tank. Part 3. Piezometric devices
TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
The Document is Referenced By:
IM 14-51-00: Guidelines and explanations on topical issues of creating automation systems. Release 4. New standard drawings of the Montazhavtomatika association
IM 14-51-94, v.2: Guidelines and explanations on topical issues of development of automation systems. Release 2. General questions of application of standard drawings
MR 14-02-2003: Selection and application of selective devices for pressure measuring instruments
|
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
