RMD 23-16-2012 Sankt-Peterburg
РМД 23-16-2012 Санкт-Петербург
|
|
Recommendations for energy efficiency in residential and public buildings
Рекомендации по обеспечению энергетической эффективности жилых и общественных зданий
Status: Not effective - Superseded
The recommendations are intended for use in the development and examination of project documentation for new construction and reconstruction of residential and public buildings. The provisions of the methodological document become mandatory for compliance with the inclusion of the requirement to be guided by this document in contracts (contracts), design assignments, regulatory documents (standards) of organizations, including self-regulating. The document is intended for all participants in urban planning, government bodies and supervisors, including expert bodies. Energy efficiency requirements are subject to use in the design, expertise, construction, reconstruction, commissioning and during operation within the period during which the energy efficiency requirements are met by the developer, constructed and reconstructed heated buildings equipped with heat-consuming installations, electrical receivers, water dispensers and (or) devices for the use of natural gas to ensure energy consumers common resources and utilities. Recommendations are applied on the territory of St. Petersburg in the design of residential (by SP 54.13330.2011) and public buildings (according to SNiP 31-05, SNiP 31-06) with normalized temperature and relative humidity of the internal air and are designed to ensure the efficient use of energy resources. Recommendations do not apply to the design of: religious buildings; buildings, structures, structures, which, in accordance with the legislation of the Russian Federation, are classified as objects of cultural heritage (historical and cultural monuments); residential and public buildings heated periodically (less than five days a week) or seasonally (continuously, less than three months a year); mobile residential buildings; temporary buildings in operation no more than two heating seasons; buildings and structures as part of the engineering support of the facility - transformer substations, boiler rooms, pumping station, pumping station, central heating station.
Рекомендации предназначены для использования при разработке и экспертизе проектной документации для нового строительства и реконструкции жилых и общественных зданий. Положения методического документа становятся обязательными для выполнения при включении требования руководствоваться данным документом в договоры (контракты), задания на проектирование, нормативные документы (стандарты) организаций, в том числе саморегулируемых. Документ предназначается для всех участников градостроительной деятельности, государственных органов управления и надзора, в том числе органов экспертизы. Требования энергетической эффективности подлежат применению при проектировании, экспертизе, строительстве, реконструкции, вводе в эксплуатацию и в процессе эксплуатации в пределах срока, в течение которого выполнение требований энергетической эффективности обеспечивается застройщиком, построенных и реконструированных отапливаемых зданий, оборудованных теплопотребляющими установками, электроприемниками, водоразборными устройствами и (или) устройствами для использования природного газа с целью обеспечения потребителей энергетическими ресурсами и коммунальными услугами. Рекомендации применяются на территории Санкт-Петербурга при проектировании жилых (по СП 54.13330.2011) и общественных зданий (по СНиП 31-05, СНиП 31-06) с нормируемой температурой и относительной влажностью внутреннего воздуха и предназначены для обеспечения эффективного использования энергетических ресурсов. Рекомендации не распространяются на проектирование: культовых зданий; зданий, строений, сооружений, которые в соответствии с законодательством Российской Федерации отнесены к объектам культурного наследия (памятники истории и культуры); жилых и общественных зданий, отапливаемых периодически (менее пяти дней в неделю) или сезонно (непрерывно, менее трех месяцев в году); мобильных жилых зданий; временных зданий, находящихся в эксплуатации не более двух отопительных сезонов; строений и сооружений в составе инженерного обеспечения объекта - трансформаторные подстанции, котельные, КНС, ВНС, ЦТП.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee for the Construction of the Government of St. Petersburg,
9/13/2012
SKU: RUSS166955
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of Russian Federation subjects »
Regulatory documents of St. Petersburg »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.010 Civil engineering in general »
The Document is Replaced With:
RMD 23-16-2019 St. Petersburg: Recommendations for energy efficiency of residential and public buildings
The Document References:
Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation
GOST 10632-2007: Wood particle boards. Specifications
GOST 10832-2009: Perlite expanded sand and crushed stone. Specifications
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10923-93: Ruberoid. Specifications
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12865-67: Expanded vermiculits.
GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades
GOST 16136-2003: Thermal insulating Perlite bitumen slabs. Specifications
GOST 18108-80: Polyvinylchloride linoleum with heat and sound-insulating backing. Specifications
GOST 18124-95: Asbestos cement flat sheets. Specifications
GOST 19222-84: Arbolit and its products. General specifications
GOST 21.205-93: System of design documents for construction. Elements оf sanitary engineering systems - symbols
GOST 21.206-93: System of building design document. Pipelines. Symbols for presentation
GOST 21.601-79: System of design documents for construction. Water supply and sewerage. Working drawings
GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 23166-99: Windows. General specifications
GOST 24700-99: Windows of wood with glassing units. Specifications
GOST 24767-81: Aluminium and aluminium alloys cold-formed sections for wall and roof structures. Specifications
GOST 24866-99: Sealed insulating glass units. Specifications
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 25485-89: Cellular concretes. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission
GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 2697-64: Roofing asphalt felt. Technical requirements
GOST 28013-98: Mortars. General specifications
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 30547-97: Roofing and hydraulic insulating materials in rolls General specifications
GOST 30674-99: Windows of polyvinylchloride profiles. Specifications
GOST 30734-2000: Roof wooden window blocks. Specifications
GOST 30971-2002: Erection to joints of window assemblies adjoined to wall openings. General specifications
GOST 31167-2003: Buildings and structures. Methods for determination of air permeability of building envelope in field conditions
GOST 379-95: Silicate brick and stones. Specifications
GOST 4598-86: Fibre boards. Specifications
GOST 530-2007: Ceramic bricks and stones. General specifications
GOST 5542-87: Natural fuel gases for industrial and domestic use
GOST 5742-76: Cellular concrete thermoinsulating boards
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6266-97: Gypsum plasterboards
GOST 6428-83: Plaster slabs for partitions. Specifications
GOST 6617-76: Petroleum construction bitumen
GOST 7251-77: Polyvinilohloride linoleum with woven and unwoven backing. Specifications
GOST 7473-2010: Fresh concrete. Specifications
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8673-93: Plywood panels
GOST 8736-93: Sand for construction works. Specifications
GOST 8740-85: Linerboard
GOST 8904-81: Hard wood-fibre boards with varnish and paint coatings. Specifications
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9462-88: Round timber of broadleaf sorts
GOST 9463-88: Round wood products
GOST 9480-89: Sawn facing slabs of stone. Specifications
GOST 9548-74: Roofing petroleum bitumens. Specifications
GOST 9583-75: Cast-iron pressure pipes, manufactured by methods of centrifugal and semicontinuous casting
GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications
GOST R 21.1101-2009: System of design documents for construction. Main requirements for design and working documents
GOST R 51263-99: Concrete with polysterene aggregates. Specifications
GOST R 51595-2000: Non-traditional power engineering. Solar power engineering. Solar collectors. General specifications
GOST R 54170-2010: Clear flat glass. Specifications
MGSN 2.01-94: Energy Saving in Buildings
Resolution 318: On state regulation of prices for energy resources, other products and services
Resolution 318: Rules of state control over compliance with the legislation on energy saving and energy efficiency
RMD 31-07-2009 Sankt-Peterburg: Guidelines for the design of preschool educational institutions in St. Petersburg
SanPiN 2.1.2.1188-03: Swimming pools. Hygienic requirements for arrangement, operation and quality of water, quality control
SanPiN 2.1.2.2645-10: Sanitary and epidemiological requirements for living conditions in residential buildings and premises
SanPiN 2.1.3.2630-10: Sanitary and epidemiological requirements for organizations engaged in medical activities
SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control
SanPiN 2.2.2/2.4.1340-03: Hygienic requirements for personal electronic computers and work organization
SanPiN 2.3.6.1079-01: Hygiene and Epidemiology Criteria for Public Catering Establishments and for the Preparation and Circulation By Them of Food Products and Raw Foodstuffs
SanPiN 2.4.1.2660-10: Sanitary and epidemiological requirements for the device, content and organization of the mode of operation in pre-school organizations
SanPiN 2.4.2.2821-10: Sanitary and epidemiological requirements for the conditions and organization of training in general education organizations
SNiP 2.04.03-85: Sewage. External systems and structures
SNiP 23-02-2003: Buildings Heat Insulation
SNiP 3.05.01-85: Indoor plumbing systems
SNiP 31-05-2003: Public office buildings
SNiP 31-06-2009: Public buildings and constructions
SNiP 41-01-2003: Heating, Ventilation and Air Conditioning (HVAC)
SNiP 41-02-2003: Heat networks
SNiP 41-03-2003: Designing of thermal insulation of equipment and pipelines
SP 10.13130.2009: Systems of fire protection. Fire line inside. Fire safety requirements
SP 23-101-2004: Design of thermal protection of buildings
SP 31-110-2003: Design and installation of electrical facilities of residential and public buildings. To replace VSN 59-88
SP 31-113-2004: Swimming pools
SP 40-101-96: Design and installation of pipelines made of polypropylene "Random copolymer"
SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)
SP 51.13330.2011: Noise protection and rooms acoustics.
SP 54.13330.2011: Multicompartment residential buldings
SP 7.13130.2009: Heating, ventilation and air-conditioning. Fire safety requirements
SP 8.13130.2009: Systems of fire protection. Sources of external fire protection. Water supply. Fire safety requirements
TSN 23-340-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. St. Petersburg
TSN 31-324-2002: Preschool educational institutions. St. Petersburg
The Document is Referenced By:
RMD 56-05-2015 Saint-Petersburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing (2016 edition)
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
