RMD 52-01-2006 Sankt-Peterburg
РМД 52-01-2006 Санкт-Петербург
|
|
Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
Проектирование и возведение ограждающих конструкций жилых и общественных зданий с применением ячеистых бетонов в Санкт-Петербурге. Часть I
Status: Effective - Introduced for the first time
The document is applied on the territory of St. Petersburg in the development of technical conditions, design and technological documentation for products and structures made of cellular concrete, as well as in their manufacture and use in construction, reconstruction and major repairs of residential and public buildings.
Документ применяется на территории Санкт-Петербурга при разработке технических условий, проектной и технологической документации на изделия и конструкции из ячеистых бетонов, а также при их изготовлении и использовании в строительстве, реконструкции и капитальном ремонте жилых и общественных зданий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee for the Construction of the Government of St. Petersburg,
3/27/2006
SKU: RUSS166967
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of Russian Federation subjects »
Regulatory documents of St. Petersburg »
The Document References:
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 14192-96: Cargo marking
GOST 14791-79: Sealing non-hardening
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 18105-86: Concretes. Rules for the strength control
GOST 18343-80: Pallets for bricks and hollow clay tiles
GOST 19010-82: Concrete and reinforced concrete blocks for walls of buildings. General specifications
GOST 19570-74: Autoclave cellular concrete panels for internal walls, partitions and floors of house and civil buildings. Technical requirements
GOST 20259-80: Universal containers
GOST 21520-89: Small-sized wall blocks of cellular concrete. Specifications
GOST 21718-84: Building materials. Dielectric method of measurement of moisture
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 25485-89: Cellular concretes. Specifications
GOST 25621-83: Sealants and caulking products for building constructions. Classification and general technical requirements
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 27005-86: Light-weight and cellular concretes. Rules of average density control
GOST 28013-98: Mortars. General specifications
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 379-95: Silicate brick and stones. Specifications
GOST 530-2007: Ceramic bricks and stones. General specifications
GOST 530-95: Ceramic bricks and stones. Technical specifications
GOST 5494-95: Pigmentary aluminium. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5742-76: Cellular concrete thermoinsulating boards
GOST 5802-86: Mortars. Test methods.
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7484-78: Ceramic face bricks and stones. Specifications
GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength
GOST 8736-93: Sand for construction works. Specifications
GOST 9179-77: Lime for building purposes. Specifications
GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.
Manual for SNiP II-22-81: Design and application of panel and brick walls with various types of cladding. Reference manual to SNiP
Manual for SNiP II-22-81: Manual for the design of stone and reinforced stone structures
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SNiP 2.03.01-84 Reference Manual: Reference manual on design of concrete and reinforced concrete structures made of heavy and light concrete without reinforcement prestressing
SNiP 23-02-2003: Buildings Heat Insulation
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 20.13330.2011: Loads and impacts
SP 23-101-2004: Design of thermal protection of buildings
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 82-101-98: Preparation and use of masonry mortars. To replace SN 290-74. Letter № AB-20-218 / 12 dated 06.17.98.
TSN 23-340-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. St. Petersburg
The Document is Referenced By:
RMD 52-02-2007 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part II
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.