RST RSFSR 508-75
РСТ РСФСР 508-75
|
|
Electric Guitar. General technical requirements
Электрогитары. Общие технические требования
Status: Effective
The standard applies to electric guitars intended for solo, ensemble, orchestral performance of musical works, accompaniment, as well as for educational purposes. The standard does not apply to acoustic guitars with pickups.
Стандарт распространяется на электрогитары, предназначенные для сольного, ансамблевого, оркестрового исполнения музыкальных произведений, аккомпонирования, а также для учебных целей. Стандарт не распространяется на акустические гитары со звукоснимателями.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosplan of the RSFSR,
5/6/1975
SKU: RUSS167102
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.16 Testing and control of products for cultural and community purposes »
4.16.6 Equipment, inventory and accessories for theater and entertainment enterprises and cultural institutions »
ISO classifier »
97 HOUSEHOLD APPLIANCES AND TRADE EQUIPMENT. RECREATION. SPORT »
97.200 Equipment for recreation »
97.200.20 Musical instruments »
National standards »
97 HOUSEHOLD APPLIANCES AND TRADE EQUIPMENT. RECREATION. SPORT »
97.200 Equipment for recreation »
97.200.20 Musical Instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
U Products of cultural and domestic purposes »
U4 Musical Instruments »
U42 String Instruments »
National Standards for OKSTU »
EQUIPMENT AND PRODUCTS FOR CULTURAL, HOUSEHOLD, HOUSEHOLD AND EDUCATIONAL PURPOSE. EQUIPMENT FOR THEATER AND ENTERTAINMENT ENTERPRISES AND AUXILIARY FOR LIGHT INDUSTRY »
Electromusical instruments »
The Document References:
GOST 102-75: Birch plywood for aircraft. Specifications
GOST 10354-82: Polyethylene film Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12271-76: The copolymers of styrene. Specifications
GOST 14192-77: Marking of cargoes
GOST 14231-78: Urea-formaldehyde resins. Specifications
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 15612-85: Products of wood and wooden materials. Methods for determining surface roughness parameters
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 16483.7-71: Wood. Methods for determination of moisture content
GOST 18992-80: Polyvinyl acetate homopolymeric coarse breakup dispersion. Specifications
GOST 19459-87: Injection moulding polyamide copolymers. Specifications
GOST 20282-86: General-purpose polystyrene. Specifications
GOST 2060-90: Brass rods. Specifications
GOST 2067-93: Bone glue. Specifications
GOST 21228-85: Celluloid. Specifications
GOST 21488-76: Extruded bars of aluminium and aluminium alloys
GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 2748-77: Hard rubber plates, rods and tubes for electrotechnical purposes. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2977-82: Planed veneer. Specifications
GOST 3056-90: Casein glue powder. Specifications
GOST 3252-80: Hide glue. Specifications
GOST 380-88: Common quality carbon steel. Grades
GOST 3916.1-89: Plywood with outer layers of deciduous veneer for general use. Specifications
GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications
GOST 503-81: Cold-rolled low-carbon steel strip. Specifications
GOST 5220-78: Nickel silver wire
GOST 5406-84: Enamels НЦ-25. Specifications
GOST 7016-82: Products of wood and wooden materials. Parameters of surface roughness
GOST 7897-83: Blanks of hardwood timber
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 896-69: Paints and varnishes. Photoelectrical method for determination of gloss of coatings
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 931-90: Brass sheets and strips. Specifications
GOST 9784-75: Organic sheet glass for illuminating engineering. Specifications
GOST 99-89: Cut veneer. Specifications
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.