GOST 7417-75

ГОСТ 7417-75

Calibrated round steel

Сталь калиброванная круглая

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to calibrated cold-drawn or cold-rolled steel of circular cross-section with a diameter of from 3 to 100 mm.

Стандарт распространяется на калиброванную холоднотянутую или холоднокатаную сталь круглого сечения диаметром от 3 до 100 мм.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 8

Approved: State Committee of Standards of the Council of Ministers of the USSR, 4/4/1975

SKU: RUSS16817

Price: $38.00

English keywords: steel bars and rods;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.60 Steel bars and wire rod »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.60 Steel bars and wire rod »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V32 Rolled and shaped steel »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » Structural steel bars »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » High quality bar steel, except for structural steel »

National Standards for OKSTU » PRODUCTS OF FURTHER TRANSITION FROM ROLLED METAL, BALLS, CILBEPS » Cold drawn bar steel (calibrated) »


As a Replacement Of:

GOST 7417-57: Calibrated rolled steel. Types and sizes

The Document References:

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 7417-57: Calibrated rolled steel. Types and sizes

The Document is Referenced By:

GOST 10403-80: Constructional steel trowels. Technical requirements

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 1051-73: Calibrated quality steel

GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 10831-80: Paint rolls specification

GOST 10831-87: Paint rolls specification

GOST 11036-75: Electrotechnical quality unalloyed steel. Specifications

GOST 12766.3-90: Precision gauged alloys of high electric resistance

GOST 12803-76: Steel connections. Specification

GOST 12840-80: Safety locks for single hooks. Type and dimensions

GOST 13877-80: Sucker rods and couplings

GOST 13877-96: Sucker rods and sucker rod couplings. Specifications

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 14225-83: Wooden cases

GOST 1435-74: Non-alloyed tool steel. Specification

GOST 1435-90: Unalloyed tool steel bars, strips and coils

GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 16556-2016: Ground connections for movable electric units. General specifications

GOST 16556-81: Grounding rods for mobile electrical equipment

GOST 18757-80: Composite stops for turned back strip fixing. Design and dimensions

GOST 19265-73: Bars and strips out of high-speed steel. Specifications

GOST 20072-74: Heat-resistant steel

GOST 20824-81: Varnish ЭП-730. Specifications

GOST 20933-75: Handles for loose press-moulds. Construction and dimensions

GOST 21022-75: Chromic steel for precise bearings. Specifications

GOST 22197-83: Buffer rods for sheet stamping dies. Design and dimensions

GOST 22713-77: Cutting tools of high-speed steel for processing of plastics. Specification

GOST 23143-78: Enamels ЭП-773. Specifications

GOST 23143-83: Enamels ЭП-773. Specifications

GOST 23356-78: Threaded pipeline connections. Pressing rings. Construction

GOST 2361-74: Limiters for cases flap covers. Specifications

GOST 24140-80: Pipe-line fastening parts. Cramps and clamps. Specifications

GOST 24536-80: Rod stops. Design and dimensions

GOST 25996-83: High-strength round link chains

GOST 26230-88: Automatic lines for final forming of nuts. Output range

GOST 26405-84: Tools for manufacturing bolts and nuts using cold heading machines

GOST 28393-89: PM bars and strips of high-speed steel. General specifications

GOST 28456-90: Expansive dowels for building. General specifications

GOST 312-79: Varnish БТ-5100. Specifications

GOST 33186-2014: Clamp of spring rod for mounting rails. Specifications

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications

GOST 5950-73: Bars and strips from a toolhouse steel alloy

GOST 6414-87: Automatic five-position nut cold upsetters. Parameters and dimensions. Norms of accuracy

GOST 7214-72: Bench piercers

GOST 801-78: Bearing steel. Specifications

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect

GOST 9074-85: Joined by pins slot cloths

GOST 9533-81: Trowels, tuck pointing tools. Specifications

GOST R 52082-2003: Support polymeric outdoor insulators for voltage 6-220 kV. General specifications

GOST R 56299-2014: Rolled products from bearing steel. Specifications

GOST R 56710-2015: Connections on the pasted cores for wooden structures. Specifications

GOST R 58515-2019: Trowel, shovels and cuts. Technical conditions

GOST R 58517-2019: Paint rollers. Technical conditions

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

MI 1069-85: State system for ensuring uniformity of measurements. Methodical instructions. Machine-oriented data recording system for metals (alloys)

OST 108.004.109-80: Welded joint seams of CHP plant power equipment. Magnetic-particle control method.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.

OST 34-13-016-88: Self-tapping bolts. Design and dimensions. Technical requirements

OST 3-98-80: Constructional and spring refining steel. Technical requirements.

PKO-2010.6: Reference materials for the design work of the electrical part of the project

PNST 14-2012: Machine nanostructured springs. Specifications

RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 91-78: Percussion musical instruments. General technical requirements

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

TU 34-38-20220-94: Smooth tube steam stationary boilers with natural circulation screens. Technical conditions for major repairs

TU 6-10-1052-75: Enamel VL-515 red-brown

TU 6-10-1270-87: Varnish BT-5101

TU 67-269-79: Self-tapping screw. Technical conditions

UO 38.12.007-87: Centrifugal compressors. General technical conditions for repairs

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!