imgalt

SNiP 5.01.23-83

СНиП 5.01.23-83

Standard cement consumption rates for the preparation of precast concrete and monolithic concrete, reinforced concrete products and structures

Типовые нормы расхода цемента для приготовления бетонов сборных и монолитных бетонных, железобетонных изделий и конструкций

Status: Not effective - Superseded

The standards are designed to assess the validity of existing production standards for cement for the preparation of heavy and light concrete at enterprises for the production of precast concrete and reinforced concrete products and in the construction of monolithic structures for all types of construction.

Нормы предназначены для оценки обоснованности действующих производственных норм расхода цемента для приготовления тяжелых и легких бетонов на предприятиях по производству сборных бетонных и железобетонных изделий и при возведении монолитных конструкций для всех видов строительства.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction), 12/19/1983

SKU: RUSS168347

Price: $391.00



imgalt

The Product is Contained in the Following Classifiers:

Construction Price Formation » Normative documents on economics » Material and fuel and energy resources »

Construction (Max) » Regulations » Documents System of normative documents in construction » 8. Normative documents on economics » к.82 Material and fuel and energy resources »


The Document is Replaced With:

SNiP 82-02-95: Federal (standard) element cement consumption rates at manufacture of concrete and reinforced concrete products and structures

As a Replacement Of:

SN 386-74: Standard cement consumption rates for concrete of precast concrete and reinforced concrete products of mass production

The Document References:

GOST 10178-76: Portland cement and slag Portland cement. Specification

GOST 10181.1-81: Concrete mixture. Test method of determination of workability

GOST 10268-62: Aggregates for heavy-weight concrete. Technical requirements

GOST 22266-76: Sulphate resisting cements. Specifications

GOST 24211-2008: Admixtures for concretes and mortars. General specifications

GOST 25820-83: Lightweight concrete. Specifications

GOST 30268-95: Active impregnated carbons

GOST 310.4-81: Cements. Methods of tests of bending and compression strengths

GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications

SN 386-74: Standard cement consumption rates for concrete of precast concrete and reinforced concrete products of mass production

SNiP III-15-76: Concrete and reinforced concrete structures monolithic

ST SEV 1406-78: Concrete and reinforced concrete structures. Basic provisions in design

The Document is Referenced By:

GOST 25820-83: Lightweight concrete. Specifications

GOST 7473-85: Ready-mixed concrete. Specification

Manual for SNiP 3.09.01-85: Manual on the use of chemical additives in the production of precast concrete structures and products

Manual for SNiP 3.09.01-85: Manual for the heat treatment of precast concrete structures and products

Manual for SNiP 3.09.01-85: The technology of manufacturing reinforced concrete pressure pipes with a steel core

Manual for SNiP 3.09.01-85: Manual for the heat treatment of reinforced concrete products with natural gas combustion products

Manual for SNiP 3.09.01-85: Production of prefabricated self-reinforced concrete structures and products

Manual for SNiP 3.09.01-85: Reinforced concrete molding technology manual

Manual for SNiP 3.09.01-85: Manual for heliothermal processing of concrete and reinforced concrete products using SVITAP coatings

Manual for SNiP 3.09.01-85: Manual for heliothermal treatment of concrete and reinforced concrete products using film-forming compounds

RD 12.13.055-87: Instructions for the preparation and use of concrete and mortar for mining coal mines

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -

SNiP 3.06.04-91: Bridges and pipes

SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production

SNiP 82-02-95: Federal (standard) element cement consumption rates at manufacture of concrete and reinforced concrete products and structures

VNTP 1-90/Mintransstroj, MPS: Departmental rules for the process design of heat treatment procedures for reinforced concrete bridge structures

VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English
Price: $134.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Technical ethylcellosolve. Specifications
Language: English
Price: $283.00
imgalt
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English
Price: $79.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Locomotives The method of dynamic strength tests
Language: English
Price: $333.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!