SNiP II-21-75
СНиП II-21-75
|
|
Concrete and reinforced concrete structures
Бетонные и железобетонные конструкции
Status: Not effective - Superseded
Standards must be observed in the design of concrete and reinforced concrete structures of buildings and structures operating with a systematic exposure to temperatures not higher than 50 degrees Celsius and not less than minus 70 degrees Celsius.
Нормы должны соблюдаться при проектировании бетонных и железобетонных конструкций зданий и сооружений, работающих при систематическом воздействии температур не выше 50 градусов Цельсия и не ниже минус 70 градусов Цельсия.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
11/24/1975
SKU: RUSS168359
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
k.31 Residential, public and industrial buildings and structures »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
91.200.01 Construction technology in general »
The Document is Replaced With:
SNiP 2.03.01-84: Concrete and reinforced concrete structures
As a Replacement Of:
SN 254-63: Guidelines for Ensuring the Durability of Reinforced Concrete Cooling Towers for Design and Construction
SN 287-65: Guidelines for the design of structures made of cellular concrete
SN 390-69: Instructions for use in reinforced concrete bar reinforcement structures
SNiP I-V.3-62: Concretes on inorganic binders and aggregates
SNiP I-V.4-62: Reinforcement for reinforced concrete structures
The Document is Referenced By:
GOST 19231.0-83: Reinforced concrete slabs for tramway track pavements. Specifications
GOST 19804.1-79: Precast reinforced concrete piles whole solid square with non-tension reinforcement. Design and dimensions
GOST 19804.5-83: Reinforced concrete round hole piles and pile-shells. Structure and dimensions
GOST 19804.7-83: Two-console reinforced concrete pile-pillars for agricultural buildings. Construction and dimensions
GOST 20054-82: Concrete non-pressure pipes. Specifications
GOST 22362-77: Reinforced concrete structures. Methods for determination of reinforcement tensioning force
GOST 23444-79: Centrifugal reinforced concrete posts of annular section for industrial buildings and structures
GOST 23899-79: Column reinforced concrete for parabolic shoots. Specifications
GOST 24022-80: Precast reinforced concrete foundations for columns of agricultural buildings. Specifications
GOST 24155-80: High passengers platform reinforced concrete structures. Specifications
GOST 25098-82: Panels of partitions ferro-concrete for buildings of industrial enterprises. Specification
GOST 25627-83: Reinforced concrete units of silo blocks of grain silos and grain processing facilities. General technical specifications
GOST 6785-80: Reinforced concrete window boards. Specifications
GOST 8020-80: Reinforced concrete products for inspection wells of water and gas networks. Specification
GOST 9818.0-81: Reinforced concrete flights of steps and stair landings. General specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP II-7-81: Manual for the design of frame industrial buildings for construction in seismic areas
P 795-83/Gidroproekt: Recommendations for taking into account the creep of concrete when determining the stress-strain state of concrete structures
R 26-79/NIIZhB: Recommendations for the use of concrete on a slag-alkali binder in sulfate chloride environments
R 291-77: Guidance on the basic principles of calculating the construction of foundations on bedding under block devices with dynamic loads on various soils, including heaving
R 392-80: Recommendations on the composition and technology of the preparation of very heavy concrete for pipeline weights
R 504-83: Recommendations for the manufacture of polymer-cement and glass-cement coatings
RD 110-31-14-84: Recommendations for the design and installation of foundations from flat profiled piles
RD 31.31.12-83: Guidelines for the design of rims in front of existing gravity-type structures
RD 31.31.24-81: Recommended Practice for the Design of Wharf Structures Erected as Diaphragm Walls
RD 31.31.31-83: Design Manual for design of berthing facilities for handling oversized and heavy cargo. Minmorflot, 1983
RTM 31.3017-78: Method for Calculation of Prestressed Piles and Hollow-Core Piles for Dynamic Conditions During Driving
SN 165-76: Instructions for the design of concrete and reinforced concrete structures of dense silicate concrete
SN 482-76: Instructions for the design of concrete and reinforced concrete structures designed to work in conditions of exposure to elevated and high temperatures
SN 511-78: Design Guidelines for Self-Tensioned Concrete Structures
SNiP 3.05.06-85: Electrical devices
SNiP II-56-77: Use of Concrete and Reinforced Concrete Structures in Hydraulic Construction
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
TU 33 UzSSR 01-84: Products from lightweight concrete based on slag-alkali binders. Technical specifications
TU 67-864-87: Gypsum fiber sheets. Technical conditions
VNTP 5-82/Minudobrenij: All-Union norms for technological design of underground mines for the extraction of potash and rock salt
VSN 06-77/USSR Minselstroy: Instructions for the manufacture of two-layer wall panels and blocks of lightweight concrete for agricultural buildings in series 1.832-5
VSN 09-79/USSR Minselstroy: Departmental instruction on the use of chemical additives in concrete and mortars for rural construction
VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges
VSN 16-84/USSR Minpromstroy: Instructions for strengthening the foundations of emergency and reconstructed buildings with multi-section piles
VSN 200-83: Work Execution Guidelines for Substructure Construction for High-Rise Residential Buildings
VSN 261-77/MMSS SSSR: Instructions for vibrating concrete laying using the VPT method under water and clay mortar
VSN 65.12-83/Minpromstroja SSSR: Instructions on the manufacturing and design technology of concrete and reinforced concrete structures based on slag-alkali concrete
VSN 67-129-77: Instructions for use of pile foundations from composite piles (for the conditions of Kuzbass)
|
Customers Who Viewed This Item Also Viewed:
 |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
