SNiP II-31-74
СНиП II-31-74
|
|
Water supply. External networks and facilities
Водоснабжение. Наружные сети и сооружения
Status: Not effective - Superseded
Standards should be observed in the design of newly constructed and reconstructed centralized permanent external water supply systems to supply water to settlements, industrial and agricultural enterprises.
Нормы должны соблюдаться при проектировании вновь строящихся и реконструируемых централизованных постоянных систем наружных водопроводов для обеспечения водой населенных пунктов, промышленных и сельскохозяйственных предприятий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
4/29/1974
SKU: RUSS168365
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
к.40 Water supply and sewerage »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.3 Water use »
2.3.1 Basic requirements for use of water bodies »
As a Replacement Of:
SN 188-61: Temporary guidelines for underground installation of polyethylene pipes for water supply
SN 243-63: Guidelines for the design of automation and dispatching of water supply systems
SN 267-63: Agricultural Water Design Guidelines
SN 280-64: Guidelines for the design of networks and facilities for water supply, sewage and heat networks on subsiding soils
SN 325-65: Design Guidelines for Groundwater Abstraction
SN 353-66: Guidelines for the design of populated areas, enterprises, buildings and structures in the Northern building-climatic zone
SNiP I-G.2-62: Water supply and sewage. External networks and facilities. Materials, products and equipment networks
SNiP II-G.3-62: Water supply. Design Standards
The Document References:
SN 188-61: Temporary guidelines for underground installation of polyethylene pipes for water supply
SN 243-63: Guidelines for the design of automation and dispatching of water supply systems
SN 267-63: Agricultural Water Design Guidelines
SN 325-65: Design Guidelines for Groundwater Abstraction
SNiP I-G.2-62: Water supply and sewage. External networks and facilities. Materials, products and equipment networks
SNiP II-G.3-62: Water supply. Design Standards
The Document is Referenced By:
GOST 20054-82: Concrete non-pressure pipes. Specifications
GOST 24694-81: Reinforced concrete T-joint of flumed irrigation systems. Specifications
GOST 8020-80: Reinforced concrete products for inspection wells of water and gas networks. Specification
MU 2642-82: Guidelines for the organization of sanitary-epidemiological service control of enterprises of the dairy industry
NTP 45.588-76: Buildings of civil enterprises of wire and postal service
OST 64-7-472-83: Occupational safety standards system. Production processes of finished pharmaceutical products. Production of ampouled injections. Safety requirements.
P 06-82/VNIIG: Recommendations for the design and hydraulic calculations of pumping units and water paths of technical water supply systems of TPP and NPP of high power
PPB-S-1983: Fire Safety Regulations for Buildings and Structures of Educational Institutions, Companies, and Organizations Administered by Minvuz USSR
R 486-83: Guidelines for predicting thermal interaction of pipelines with the environment
RD 204 USSR 157-84: Recommendations for the design and operation of silicate water treatment plants for corrosion protection of the internal surfaces of hot water pipelines
RD 39-1-1155-84: The main provisions on the quality of surface fresh and commercial wastewater used for injection into the reservoir at the fields of Western Siberia
RD 39-9-254-79: Guidelines for the design of oilfield facilities using a waterflooding method with polymers
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SanPiN 1974-79: Sanitary Regulations for the Design and Operation of Water Intakes Used in Potable/Nonpotable Water Supply Systems with Forced Replenishment of Underground Water Sources
SNiP I-1-74: System of normative documents
SP 2266-80: Sanitary Rules for Yeast Industry Enterprises
V3-33: Recommendations for designing the process part of refrigeration units for cooling of air conditioning systems and cooling systems for process equipment
V3-63: Recommendations for the design of water supply and sewage systems of electroplating workshops
VNTP 12-79/Minsel'hoz SSSR: Norms of technological design of warehouses of solid mineral fertilizers and pesticides for collective farms, state farms and chemicalization points
VNTP 13-1-86/MChM SSSR: Standards for technological design of open-pit mining enterprises of ferrous metallurgy
VNTP 13-2-85: Standards for technological design of mining enterprises of metallurgy with underground mining method
VNTP 1-45-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Metallurgical plants. Volume 22. Methodological guidelines for the technological design of corrosion protection of underground metal structures and communications
VNTP 25-79: Norms of technological design of industrial water supply, sewage and wastewater treatment of oil refining and petrochemical industries
VNTP 32-83: Coal and shale mines, pits and concentrating factories. Section "Sanitary-technical installations and calorific installations of shafts of mines"
VNTP 37-86: Standards for technological design of non-ferrous metallurgy mines with underground mining
VNTP 81: Engineering Design Standards for Thermal Power Plants (VSN 29-81)
VSN 40-84(r)/Gosgrazhdanstroj: Technical rules for spending of basic construction materials for the overhaul of residential buildings and utilities
VSN 51-3-85: Design of field steel pipelines
Zh3-140: Design recommendations for remedial water treatment
Zh3-142: Recommendations for the design of water liming and coagulation plants
Zh3-150: Recommendations for compiling questionnaires for ordering equipment and fittings for water treatment plants
Zh4-7: Recommendations for the calculation on the computer of ion-exchange filters and calciners for water treatment plants of boilers
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
