SNiP II-4-79
СНиП II-4-79
|
|
Natural and artificial lighting
Естественное и искусственное освещение
Status: Not effective - Superseded
Standards should be observed in the design of lighting of premises of newly constructed and reconstructed buildings and structures for various purposes, work sites outside buildings, sites of industrial and agricultural enterprises, and outdoor lighting of cities, towns and rural settlements. The standards do not apply to the design of lighting of underground workings, sea and river ports, airfields, railway stations and their paths, sports facilities, storage rooms for agricultural products, placement of plants, animals, birds, as well as the design of special technological lighting and security lighting when using technical means of protection.
Нормы должны соблюдаться при проектировании освещения помещений вновь строящихся и реконструируемых зданий и сооружений различного назначения, мест производства работ вне зданий, площадок промышленных и сельскохозяйственных предприятий и наружного освещения городов, поселков и сельских населенных пунктов. Нормы не распространяются на проектирование освещения подземных выработок, морских и речных портов, аэродромов, железнодорожных станций и их путей, спортивных сооружений, помещений для хранения сельскохозяйственной продукции, размещения растений, животных, птиц, а также на проектирование специального технологического освещения и охранного освещения при применении технических средств охраны.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
6/27/1979
SKU: RUSS168376
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
4 Industrial lighting »
4.1 Types and lighting systems »
As a Replacement Of:
SNiP II-A.8-72: Daylight. Design Standards
SNiP II-A.9-71: Artificial lighting. Design Standards
The Document is Referenced By:
CP/4288: Instructions for the design and maintenance of crossings
GKINP 15-236-91: Instructions for printing processes in kartoizdaniya
GOST 12.2.015-76: Occupational safety standards system. Machinery and equipment for glass industry. General safety requirements
GOST 12.2.045-94: The equipment for production of rubber-technical products
GOST 12.2.096-83: Standard system of labour safety. Steam boilers with pressure up to 0.07 MPa. Safety requirements
GOST 12.2.100-84: Occupational safety standards system. Machines and equipment for manufacturing clay and lime brick, ceramic and asbestos cement products. General safety requirements
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
GOST 12.3.026-81: Occupational safety standards system. Forge-pressing. Safety requirements
GOST 12.3.027-81: Occupational safety standards system. Foundry work. Safety requirements
GOST 12.3.027-92: Foundry work
GOST 12.3.040-86: Occupational safety standards system. Construction. Roofing and water proofing. Safety requirements
GOST 12.3.043-90: Occupational safety standards system. Industrial technologies of optical coating application on pieces. General safety requirements
GOST 12367-85: Tube mills of grinding units. General technical specifications
GOST 14940-96: Bleached sulphate pulp made of deciduous (aspen) wood. Specifications
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 21104-75: Non-destructive testing. Ferrosonde method
GOST 22519.0-77: Thallium. General requirements for the methods of analysis
GOST 23987-80: Canal excavators. Test methods
GOST 25589-83: Crushed stone, gravel and sand for construction works. Methods for determining the content of sulfuric and sulfur compounds
GOST 28507-99: Special with upper from leather for the protection from mechanical effects. Technical specifications.
GOST 28617-90: Metallic and non-metallic inorganic coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 30703-2001: Non-destructive testing. Safety measures for leakage testing. General requirements
GOST 31829-2012: Ozonization equipment. Safety requirements
GOST 4.226-83: Quality rating system. Building. Windows, doors and gates of wood. Nomeclature of characterictics
GOST 6937-81: Conic crushers. Specification
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.913-90: Unified system of corrosion and ageing protection. Aluminium, magnesium and alloys. Methods of accelerated corrosion test
GOST R 51057-97: Fire engineering. Portable fire extinguishers. General technical requirements. Test methods
GOST R 51706-2001: Ozonisation equipment. Safety requirements
ITP 31-87: Instructions for the technological design of enterprises for the production of perfumery products
ITP 50-88: Instructions for the technological design of enterprises of the salt industry / stone processing and the production of vacuum-evaporated salt /
ITP 52-89: Instructions for the design of enterprises for the primary processing of flax
M4153: Alphanumeric Designations in Electrical and Engineering Design Documentation
M4156: Alphanumeric Designations in Electrical and Engineering Design Documentation
M4165: Alphanumeric Designations in Electrical and Engineering Design Documentation
M4166: Recommendations for lighting outdoor installations in hazardous areas. Design materials
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)
Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"
Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"
Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.08.02-85: Manual for the design of public buildings and structures
Manual for SNiP 2.08.02-89: Health Facility Design Guide
Manual for SNiP 2.08.02-89: Club Design
Manual for SNiP 2.08.02-89: Pool Design
Manual for SNiP 2.08.02-89: Design of educational complexes and centers
Manual for SNiP 2.08.02-89: Design of catering facilities
Manual for SNiP 2.08.02-89: Design of vocational, secondary special educational institutions and educational combines
Manual for SNiP 2.08.02-89: Design of warning and evacuation systems for people during fires in public buildings
Manual for SNiP 2.08.02-89: Designing Higher Educational Institutions and Continuing Education Institutions
Manual for SNiP 2.08.02-89: Designing consumer services enterprises
Manual for SNiP 2.08.02-89: Design of kindergartens
Manual for SNiP 2.08.02-89*: Retail Design
Manual for SNiP 2.08.02-89*: Theater Design
Manual for SNiP 2.08.02-89*: Design of gyms, facilities for fitness classes and indoor ice rinks with artificial ice
Manual for SNiP 2.10.05-85: Manual on the design of enterprises, buildings and structures for the storage and processing of grain
Manual for SNiP II-4-79: Manual for the calculation and design of natural, artificial and combined lighting
Manual for VNTP 5-85/MGA: Airport Cargo Handling Design Guide
Methodical instructions 2942-83: Improvement of working conditions at enterprises producing and using phosphors
MI 2260-93: State system for ensuring uniformity of measurements. Fuel oil level in railway tanks. The method of measurement using the level gauge underfill IND-1M
MI 3189-2009: State system for ensuring uniformity of measurements. Mass flow meters Micro Motion from "Emerson Process Management". Methods of calibration with a set of pipe piston calibration installation or compact prover and flow density converter
MI 3265-2010: State system for ensuring uniformity of measurements. Ultrasonic flow transducers. On-site verification method
MI 3266-2010: State system for ensuring uniformity of measurements. Converters volumetric flow reference. Method of verification
MI 3267-2010: State system for ensuring uniformity of measurements. Volume flow transducers. Method of calibration using a standard volume flow converter
MI 3312-2011: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic flow transducers. Methods of calibration with a set of pipe piston calibration installation, in-line density converter and mass flow meters
MI 670-84: Guidelines. Determination of the need of testing units in production resources
MR 10-11/2: Guidelines for the organization of the workplace of a doctor and a nurse of the clinic
MR 2291-81: Guidelines for improving the conditions of training and education of students of the communication specifications in the specialty telegraph
MR 3910-85: Guidelines for the sanitary control of the organization of circle activities in out-of-school institutions
MR 4052-85: Methods for the determination of indicators of visual performance
MR 4955-89: Prevention of adverse effects of work on the health of employees of the administrative and managerial apparatus
MU 1924-78: Guidelines for the hygienic assessment of welding materials and methods of welding, welding and cutting metals
MU 2164-80: Guidelines for hygienic control over the design, construction and operation of higher education institutions
MU 2515-81: Guidelines for the organization of training of students of higher educational institutions
MU 4428-87: Guidelines for improving the state preventive sanitary inspection of the design of workshops and welding stations, the development of technological processes and equipment for welding production
NTP 23-94: Norms of plant design for the production of soap
NTP 53-91: Norms of technological design of production of mayonnaise
NTPD-90: Norms of technological design of diesel power plants
ODM 218.4.004-2009: Guidelines for the elimination and prevention of the occurrence of areas of concentration of road accidents during the operation of roads
ONTP 01-82/Minavtoprom: All-Union norms for technological design of engineering, instrument-making and metal-working enterprises. Forging shops
ONTP 01-85/Minjelektrotehprom: All-Union norms for the technological design of electrical repair shops (departments) of engineering, instrument-making and metalworking enterprises
ONTP 01-86: All-Union standards for the technological design of engineering, instrument-making and metal-working enterprises. Forge and press shops
ONTP 04-94: Sectoral norms of technological design of enterprises in the automotive industry. Shops of cold sheet metal stamping
ONTP 06-95: Sectoral norms of technological design of enterprises in the automotive industry. Workshops for the manufacture of special technological and non-standardized equipment, means of mechanization, automation, and office equipment
ONTP 08-96: Sectoral norms of technological design of enterprises in the automotive industry. Workshops for the repair of sanitary and heat power equipment
ONTP 09-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Mechanical repair shops
ONTP 09-96: Sectoral norms of technological design of enterprises in the automotive industry. Assembly and welding shops
ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)
ONTP 11-94: Sectoral norms of technological design of enterprises in the automotive industry. Repair shops of electrical equipment
ONTP 14-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises (refinement of ONTP-14-93). Mechanical processing assembly shops
ONTP 1-85/Minstrojdormash: All-Union norms of technological design of engineering enterprises, instrument making metallo-processing. Metalwork shops (Stocking and welding production)
ONTP 18-85: All-Union Norms of Technological Design of Nonmetallic Building Materials Enterprises
ONTP 2-87: All-Union standards for technological design of plastics processing facilities. II part
OST 2 N83-44-80: Occupational safety standards system. Arc and electroslag welding. Safety requirements
OST 2 N83-45-80: Occupational safety standards system. Contact welding. Safety requirements
OST 2 N83-46-80: Occupational safety standards system. Oxygen cutting. Safety requirements
OST 2 Н83-44-80: Occupational safety standards system. Electric arc welding and slag welding. Safety requirements.
OST 2 Н83-45-80: Labour safety standard system. Contact welding. Safety requirements.
OST 2 Н83-46-80: Labour safety standard system. Oxygen cutting. Safety requirements.
OST 24.050.34-84: Wagon steel structures design and production. Specifications.
OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.
OST 32.13-82: Preparation of tanks for filling and repair. Safety requirements
OST 35-14-82: Occupational safety standards system. Construction of highways. Concrete coatings. Safety requirements at works performance.
OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.
OST 38.01445-88: Lubrication and cooling liquid MR-7. Technical conditions
OST 41-13-256-85: Occupational safety standards system. Geological survey drilling plants. Lighting. General requirements.
OST 45.37-86: Organization of works regarding telephone repair.
OST 45.47-88: Local exchange coin boxes. Repair and testing procedures.
OST 5 9137-83: Welding of casting defects in steel and cast iron. Technical requirements
OST 5472003-82: Artificial illumination in service enterprises of civil aviation
OST 64-7-472-83: Occupational safety standards system. Production processes of finished pharmaceutical products. Production of ampouled injections. Safety requirements.
PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises
POT R O 00030171: Labor protection rules during the operation of navigable hydraulic structures
POT R O 29-001-93: Labor protection regulations for printing companies
POT R O-112-001-95: Rules for labor protection during the operation of oil depots and gas stations
POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering
POT R O-200-01-95: Rules on labor protection in automobile transport
POT R O-95120-001-94: Rules of labor protection at retailers
POT R O-97300-10-96: Rules on labor protection in animal husbandry. Horse breeding
PTB-88: Safety regulations for topographic and geodetic works
R 393-80: Recommendations for aluminum metallization of the inner surface of pipes with an outer polyethylene coating and welding of annular joints
R 52.19.555-95: Recommendations A standard project of labor organization at the workplaces of laboratory workers for monitoring surface water pollution by hydrochemical indicators
RD 102-61-87: Guidelines for certification, rationalization, accounting and planning of workplaces for drivers and maintenance workers at motor transport enterprises of the Ministry of Oil and Gas Construction
RD 24.023.52-90: Products of chemical engineering. Gumming. Typical technological process.
RD 31.30.11.01-84: Guideline on technological design of communication and the alarm system in seaports and at the MMF ship-repair enterprises. Wire communications capabilities.
RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.
RD 34.02.311-89: Method for Measurements of Gross Emissions of Nitrogen Oxides with Exhaust Gases of Thermal Power Stations Using Gas Analyzer 344KhL04
RD 34.03.204: Safety rules when working with tools and accessories
RD 34.03.215: Safety instructions for excavation work using the hydromechanization method at the facilities of the USSR Ministry of Energy
RD 34.03.223: Occupational Safety and Health Guidelines for Assembly of Large Metal Structures at Facilities Administered by Minenergo USSR
RD 34.20.185-94: Instructions for designing of urban power networks.
RD 39-0147103-344-86: Rules for technical operation of collection systems and intra-field transport of oil and gas
RD 39-30-361-80: Instructions for the design of artificial lighting for oil transportation enterprises
RD 51-00158623-06-95: The use of emergency sources of electricity at the KS MG, GPP and other gas industry facilities
RD ROSEK-004-97: Hoisting machines. Capillary control. Key Points
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RGP-85: Guidelines for cargo transportation on domestic air routes of the USSR
RM 25 951-90: APCS. Tasks for the general designer to design in adjacent parts of the automation project. Part 3. Premises for automated process control systems and automation systems. Cable facilities. Openings and embedded devices
RSN 68-87: Design of industrial and civil buildings of the West Siberian oil and gas complex
RTM 24.090.34-85: Cable taps. The norms of calculation and design
RTM 6.030-1-87: Large systems of community TV reception
RTP 37-87: Technological design guidelines for the repair and maintenance of agricultural equipment
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SanPiN 2.2.2.540-96: Technological processes rawstock materials and equipment hand tools. Hygienic requirements for hand tools and organization of work
SanPiN 5059-89: Sanitary rules for aircraft maintenance bases of civil aviation operating enterprises
SanPiN 5146-89: Temporary sanitary and hygienic norms and rules for the device, equipment, content and operating mode on personal electronic computers and video display terminals in computer rooms and display classes of all types of secondary schools
SanPiN 5781-91: Sanitary rules for food businesses
SanPiN 5791-91: Sanitary rules and regulations on the design and operation of greenhouses and greenhouses
SNiP 2.04.09-84: Automatic fire protection systems
SNiP 2.05.09-90: Tram and trolleybus lines
SNiP 2.08.01-85: Manual on design of residential buildings. Issue 3. Part 2. Structures of residential buildings
SNiP 2.10.05-85: Organizations, buildings and structures used for storage and processing of grain
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SP 12-95: Instructions for the design of objects of internal affairs bodies (police) of the Ministry of Internal Affairs of Russia
SP 3244-85: Sanitary rules for brewing and soft drink industries
SP 4043-85: Sanitary regulations for coal industry enterprises
SP 4053-85: Sanitary Rules on the installation and operation of equipment for plasma treatment of materials
SP 4079-86: Sanitary regulations for manufacturers of drugs
SP 4542-87: Sanitary rules for livestock enterprises
SP 4695-88: Sanitary rules for refregirators
SP 4783-88: Sanitary regulations for the production of synthetic polymeric materials and enterprises for their processing
SP 4950-89: Sanitary regulations for the production of carbon-based materials (coal, graphitized, fibrous, composite)
SP 5183-90: Sanitary rules for foundry production (factories, workshops, sites)
SP 5312-91: Sanitary rules for the enterprises of copper-nickel industry
SP 5788-91: Sanitary rules for wineries
STN Ts 01-95: 1520-mm Gauge Railways
TSN JeO 98: Territorial building codes for energy supply of new and reconstructed buildings and structures using autonomous and centralized heat supply systems. Moscow region
TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines
TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions
Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction
VNTP 03-91: Departmental standards of technological design of sugar beet factories. Volume 2, Part 1. Appendices
VNTP 04-94k: Standards for technological design of enterprises for processing potatoes for starch
VNTP 10-79/Minavtoprom: Norms of technological design of metal-coating workshops of automobile industry plants
VNTP 10-91: Engineering Design Standards for Breweries
VNTP 12-92 KD: Interim Engineering Design Standards for Facilities for Production of Canned Foods for Child Nutrition
VNTP 1-31-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Metallurgical plants. Volume 7. Electricity
VNTP 13-5-80/MChM SSSR: Instructions and norms of technological design and technical and economic indicators of the energy management of ferrous metallurgy enterprises. Volume 23. Mining enterprises
VNTP 18-93: Standards for technological design of margarine production
VNTP 26-94: Standards for technological design of sparkling wine factories (production of Soviet champagne using a continuous tank method)
VNTP 30-85: Norms of technological design of repair facilities of non-ferrous metallurgy enterprises
VNTP 81: Engineering Design Standards for Thermal Power Plants (VSN 29-81)
VNTP 81-85: Norms of technological design for petroleum-refining and organic synthesis products manufacture enterprises
VNTP 9-1-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Metallurgical plants. Volume 11. Production of shielding gases
VNTP/MPS 85: Departmental norms of technological design. Devices of automation and telemechanics in railway transport.
VNTP-88: Departmental norms of technological design of washing and steaming stations
VSN 13-94: Instructions for the design of fire and explosion hazardous production of alcohol, alcoholic beverage and brandy enterprises of the food industry
VSN 196-83: Industry standards for the design of artificial lighting for the main shops of industrial enterprises of the Ministry of Transport
VSN 24-88: Technical Guidelines for Road Repair and Maintenance
VSN 25-86: Road Traffic Safety Guidelines
VSN 34-82: Sectoral Standards for the Design of Artificial Lighting for Oil Industry Enterprises
VSN 34-91/USSR Minneftegazprom: Industry norms for the design of artificial lighting for oil and gas industry enterprises
VSN 34-94 Russian Defense Ministry: Planning and development of military camps
VSN 35-94 Russian Defense Ministry: General Military Buildings
VSN 46-86: Sports and fitness facilities. Design Standards
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
VSN 49-86/Gosgrazhdanstroy: Children's preschool institutions. Design Standards
VSN 64-064-88: Instructions for the construction design of the medical and microbiological industry
VSTP-6.02-92: Sanitary and veterinary requirements for the design of meat industry enterprises
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
