SNiP III-D.10-72
СНиП III-Д.10-72
|
|
Main pipelines. Rules of production and acceptance of work
Магистральные трубопроводы. Правила производства и приемки работ
Status: Not effective - Superseded
The document extends to the construction of newly constructed and reconstructed steel trunk pipelines with a nominal diameter of up to 1,400 mm inclusive: gas pipelines, oil pipelines, oil pipelines, condensate lines and branch pipelines to gas distribution stations of populated areas and industrial stations of populated areas and industrial enterprises, oil pipelines and oil pipelines for oil petroleum products at tank farms and enterprises, as well as pipelines of gas and oil field networks field and interfield collectors of oil and gas fields and underground gas storage stations.
Документ распространяется на строительство вновь сооружаемых и реконструируемых стальных магистральных трубопроводов диаметром условного прохода до 1400 мм включительно: газопроводов, нефтепроводов, нефтепродуктопроводов, конденсатопроводов и ответвления газопроводов до газораспределительных станций населенных мест и промышленных станций населенных мест и промышленных предприятий, нефтепроводов и нефтепродуктопроводов для подачи нефти и нефтепродуктов на нефтебазы и предприятия, а также трубопроводов газонефтепромысловых сетей, промысловых и межпромысловых коллекторов нефтяных и газовых промыслов и станций подземного хранения газа.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
6/21/1972
SKU: RUSS168515
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
K.34 Main and field pipelines »
Welding regulations »
Welding work »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.4 Environmental safety requirements in design, installation and operation of submarine cables and pipelines »
As a Replacement Of:
SNiP III-D.10-62: Main pipelines. Rules for the organization of construction, work and acceptance into operation
The Document References:
GOST 15836-79: Bitumen-rubber insulating mastic. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
The Document is Referenced By:
R 131-72: Recommendations on technology and organization of the mechanized construction of the northern gas pipeline (Nadym-Salekhard-Ukhta) with a diameter of 1,420 mm
R 187-75: Recommendations on the technology of construction of pipelines from conventional pipes with factory insulation and from pipes 24 m long with route and factory insulation
R 218-76: Guide to the organization and technology of construction of the ammonia pipeline Togliatti-Odessa
R 259-77: Guide to the organization and technology of construction of the ammonia pipeline Togliatti-Grigorievsky Liman
R 265-77: Guidance on the technology and organization of construction of trunk pipelines with a diameter of 1220-1420 mm by the flow method of factory-insulated pipes
R 282-77: Guidelines for the construction of pipe-in-pipe underwater pipelines for transitions of the ammonia pipeline Togliatti-Grigorievsky Liman
R 301-77: Guidance on engineering assessment and forecasting of the actual structural reliability of main pipelines
R 376-79: Manual on technology and organization of construction of pipelines from factory pipes with insulation
R 393-80: Recommendations for aluminum metallization of the inner surface of pipes with an outer polyethylene coating and welding of annular joints
RD 39-1-170-79: Methodology for accounting for technological losses of natural gas at oil and gas producing enterprises of Minnefteprom
RD 39-30-297-79: Trunk oil pipelines. Rules for the overhaul of underground pipelines
VNTP 1-45-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Metallurgical plants. Volume 22. Methodological guidelines for the technological design of corrosion protection of underground metal structures and communications
VNTP 3-77: Norms of technological design of facilities for the collection, transport, preparation of oil, gas and water of oil fields
VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields
VSN 2-59-75/Minneftegazstroi: Guidelines for the Remediation of Lands Used for the Construction of Pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
