SNiP II-V.9-73
СНиП II-В.9-73
|
|
Anticorrosive protection of building structures of buildings and structures. Design Standards
Антикоррозионная защита строительных конструкций зданий и сооружений. Нормы проектирования
Status: Not effective - Superseded
Norms and rules should be observed when designing corrosion protection of building structures of buildings and structures exposed to corrosive media.
Нормы и правила должны соблюдаться при проектировании антикоррозионной защиты строительных конструкций зданий и сооружений, подвергающихся воздействию агрессивных сред.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
7/12/1973
SKU: RUSS168586
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.20 Basic provisions for reliability of building structures »
The Document is Replaced With:
SNiP 2.03.11-85: Corrosion protection of buildings structures
As a Replacement Of:
SN 163-61: Instructions for the design and installation of anti-corrosion protection of chimneys of enterprises with aggressive media
SN 206-62: Temporary guidelines for corrosion protection of steel embedded parts and welded joints in large-panel buildings
SN 262-67: Design guidelines for corrosion protection of building structures
SNiP I-V.27-71: Protection of building structures against corrosion. Materials and products resistant to corrosion
The Document References:
SN 163-61: Instructions for the design and installation of anti-corrosion protection of chimneys of enterprises with aggressive media
SN 206-62: Temporary guidelines for corrosion protection of steel embedded parts and welded joints in large-panel buildings
SN 262-67: Design guidelines for corrosion protection of building structures
The Document is Referenced By:
GOST 21096-75: Window steel panels of hot-rolled and roll-formed sections for industrial buildings
GOST 26519-85: Reinforced concrete structures of buried rooms with a beam-type ceiling. Specification
GOST 26804-86: Metal road safety barriers. Specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
OST 34-29-582-82: Protective coating for steel structures of high-voltage substation overhead power line supports and open junction boxes by hot tinning method. Technical requirements. Acceptance rules and inspection methods.
OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.
OST 36-122-85: Steel building structures. Field connections on dowels. General requirements.
R 392-80: Recommendations on the composition and technology of the preparation of very heavy concrete for pipeline weights
R 589-86: Recommendations for ballasting of pipelines at underwater crossings
RD 31.31.24-81: Recommended Practice for the Design of Wharf Structures Erected as Diaphragm Walls
RD 31.31.29-82: Design manual for design of mud-cement bases and foundations for port facilities. Minmorflot. Soyuzmorniiproekt, 1982
RD 31.31.38-86: Instructions for strengthening and reconstruction of mooring facilities.
RD 31.35.01-80: Guidelines for corrosion protection of marine port facilities designed for handling chemicals. Minmorflot, Soyuzmorniiproekt, 1980
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RSN 58-86: Guidelines for design of panel exterior walls of residential buildings for the north building and climatic zone
SNiP 2.03.11-85: Corrosion protection of buildings structures
TU 102-190-78: Aluminum frame panels for walls of heated industrial buildings
TU 33-82-86: Plates flat with reinforcement outlets
TU 36-1199-81: Slatted welded floor type "Visp". Technical conditions
TU 5210-001-25432924-2008: Fences, road, metal, barrier type
TU 67-411-82: 10HNDP and 10HDP steel profiles, cold-formed with trapezoidal corrugation for construction. Technical conditions. Experimental batch 15000 t
VNTP 03-86: Industry-Specific Engineering Design Standards for Cold-Storage Distribution Warehouses
VSN 17-79/Ministry of Defence: Instructions for the design of drainage in the airfields of permanent airfields
VSN 200-83: Work Execution Guidelines for Substructure Construction for High-Rise Residential Buildings
VSN 34/XXII-78: Technical guidelines for the production and acceptance of work during the construction of sea and river port facilities. Chapter XXII. Mooring structures from precast reinforced concrete shells of large diameter
VSN 34-83: Cementation of rock foundations of hydraulic structures
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
