GOST 9573-96
ГОСТ 9573-96
|
|
Thermal insulating plates of mineral wool on synthetic binder. Specifications
Плиты из минеральной ваты на синтетическом связующем теплоизоляционные. Технические условия
Status: Not effective - Superseded. IUS 2-2014
The standard applies to thermal insulation boards made of mineral wool on synthetic binder with water-repellent additives or without them, intended for thermal insulation of building structures under conditions precluding the contact of products with indoor air and industrial equipment. The standard does not apply to slabs of mineral wool: decorative, reinforced, vertically layered, corrugated, from spunbond and hydromassage.
Стандарт распространяется на теплоизоляционные плиты из минеральной ваты на синтетическом связующем с гидрофобизирующими добавками или без них, предназначенные для тепловой изоляции строительных конструкций в условиях, исключающих контакт изделий с воздухом внутри помещений, и промышленного оборудования. Стандарт не распространяется на плиты из минеральной ваты: декоративные, армированные, вертикально-слоистые, гофрированные, из фильерной ваты и гидромассы.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Construction of Russia,
12/6/1996
SKU: RUSS16862
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
K.64 Heat-insulating, sound-insulating and sound-absorbing materials »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
3 Workspace air »
3.2 Improvement of air environment and normalization of microclimate parameters »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.60 Heat and sound insulating materials »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.60 Heat and sound insulating materials »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh15 Insulating building materials »
The Document is Replaced With:
GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications
As a Replacement Of:
GOST 9573-82: Thermal insulating mates of mineral wool on synthetic binder. Specifications
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 18051-83: Wooden containers for heat-insulating materials and products
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 2228-81: Paper for bags
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25880-83: Heat insulating construction materials and products. Packing, marking, transportation and storage
GOST 25951-83: Thermoshrinking polyethylene film. Specifications
GOST 26281-84: Heat-insulating construction materials and products. Acceptance rules
GOST 26381-84: Disposable flat pallets general specifications
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30256-94: Building materials and products. The method of the thermal conductivity determination by a cylindrical probe
GOST 30290-94: Building materials and products. Surface converter method of thermal conductivity determination
GOST 4640-93: Mineral wool. Specifications
GOST 515-77: Bitumized and tarred packaging paper
GOST 7076-87: Building materials and products. Method of thermal conductivity determination
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 9078-84: Flat pallets
GOST 9570-84: Box and post pallets
The Document is Referenced By:
GJeSN 81-02-07-2001: State estimated standards. State elementary estimate norms for construction and special construction work. Part 7. Prefabricated concrete and reinforced concrete structures (as amended by orders of the Ministry of Construction of Russia dated January 30, 2014 N 31 / pr, dated October 17, 2014 N 634 / pr, dated November 12, 2014 N 703 / pr)
GJeSN 81-02-10-2001: State estimated standards. State elementary estimate norms for construction and special construction work. Part 10. Wooden structures (as amended by orders of the Ministry of Construction of Russia dated January 30, 2014 N 31 / pr, dated October 17, 2014 N 634 / pr, dated November 12, 2014 N 703 / pr)
GJeSN 81-02-26-2001: State estimated standards. State elementary estimate norms for construction and special construction work. Part 26. Thermal insulation works (as amended by orders of the Ministry of Construction of Russia dated January 30, 2014 N 31 / pr, dated October 17, 2014 N 634 / pr, dated November 12, 2014 N 703 / pr)
GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 18128-82: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 23307-78: Thermoinsulating mineral wool vertically-layered mats. Specifications
GOST 24698-81: Wooden external doors for dwellings and public buildings. Types, structure and dimensions
GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications
GOST R 8.621-2006: State system for ensuring the uniformity of measurements. Building materials and products. Moisture and heat conduction measurement procedure by the dielcometric method
MDS 31-8.2002: Recommended Practice for the Design and Installation of Skylights for Natural Illumination of Rooms
MDS 81-39.2005: Individual elemental estimate of the consumption rate of materials and labor costs for the finishing of the premises with KNAUF complete systems. Standard flow charts for finishing works using KNAUF complete systems. Volume 1. Individual elemental estimat
ONTP 444-86: National Engineering Design Standards for Facilities for the Production of Mineral Wool Products and Building Components
RD 34.25.401: Interim Guidelines for Acceptance of Thermal Insulation of Power Units After Installation
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
RD 34.26.601: Guidelines for Repair of Brickwork of Steam Boilers at Electric Power Generating Stations
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SO 002-02495342-2005: Roofs of buildings and structures. Design and construction. Standard of organization
SP 12-101-98: Technical rules for manufacture of the outdoor thermal insulation of buildings with fine plaster on the insulant
SP 23-101-2000: Design of thermal performance of buildings
SP 23-101-2004: Design of thermal protection of buildings
SP 55-101-2000: Fencing structures made with gypsum-cardboard sheets
SP 55-102-2001: Structures made with gypsum fiber sheets
TR 94.09-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 09: Thermal Insulation for Exterior Wall Panel Joints
TR 95.07-99: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 07: Sealing of Joints of Exterior Building Enclosures
TR 95.17-01: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures
TSN 23-318-2000: Thermal protection of buildings. Republic of Bashkortostan
TSN 23-337-2002: Thermal insulation of equipment and pipelines. Sverdlovsk region
TSN 23-349-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Samara Region
TU 34 26.10579-95: Stitched Thermal Insulating Mats
TU 36-1180-85: Industrial Structures for Thermal Insulation of Pipelines, Apparatus and Tanks
|
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
