imgalt

NPB 105-95

НПБ 105-95

Determination of Rooms and Buildings Categories on Explosion and Fire Hazard

Определение категорий помещений и зданий по взрывопожарной и пожарной опасности

Status: Not effective - Superseded

The standards establish the methodology for determining the categories of rooms and buildings (or parts of buildings between fire walls - fire compartments) for production and storage purposes for explosion and fire hazards, depending on the number and fire and explosion hazard properties of substances and materials located (circulating) in them in them productions. The technique should be used in the development of departmental standards of technological design relating to the categorization of premises and buildings. The standards do not apply to premises and buildings for the production and storage of explosives, means of initiation of explosives, buildings and structures designed according to special rules and regulations approved in the prescribed manner.

Нормы устанавливают методику определения категорий помещений и зданий (или частей зданий между противопожарными стенами - пожарных отсеков) производственного и складского назначения по взрывопожарной и пожарной опасности в зависимости от количества и пожаровзрывоопасных свойств находящихся (обращающихся) в них веществ и материалов с учетом особенностей технологических процессов размещенных в них производств. Методика должна использоваться при разработке ведомственных норм технологического проектирования, касающихся категорирования помещений и зданий. Нормы не распространяются на помещения и здания для производства и хранения взрывчатых веществ, средств инициирования взрывчатых веществ, здания и сооружения, проектируемые по специальным нормам и правилам, утвержденным в установленном порядке.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: GUGPS Ministry of Internal Affairs of Russia, 10/31/1995

SKU: RUSS16865

Price: $199.00

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of supervisory authorities » Normative documents of State Fire Service and private security of Ministry of Internal Affairs »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » IV Fire safety » 1 Organizational and technical measures for ensuring fire safety »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.220 Fire protection » 13.220.01 Fire protection in general »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.230 Explosion protection »


The Document is Replaced With:

NPB 105-03: Determination of categories of rooms, buildings and external installations on explosion and fire hazard

As a Replacement Of:

ONTP 24-86/MVD SSSR: Definition of categories of premises and buildings by explosion and fire hazard

The Document References:

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.033-81: Occupational safety standards system. Fire safety. Terms and definitions.

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

ST SEV 383-87: Fire safety in construction. Terms and Definitions

ST SEV 4473-84: Occupational Safety Requirements. Load-Hoisting Cranes. Terms and Definitions of Safety Assemblies and Devices

The Document is Referenced By:

A231: Requirements for the construction part of working drawings of electrical rooms and cable structures of industrial enterprises

Application manual SP 12.13130.2009: The manual on the application of SP 12.13130.2009 "Definition of categories of premises, buildings and outdoor installations for explosion and fire hazard"

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General

GOST R 52037-2003: Shallow ground (near surface) repository for radioactive waste disposal. General requirements

GOST R 55560-2013: Inland water transport. Operation of cargo transfer complexes and passenger terminals of river ports. Safety requirements. General

GOST R 57618.2-2017: Small craft Infrastructure. Yacht harbours. General requirements

GOST R 58736-2019: Parking of small vessels. General requirements

Indication G-822u: Standards for equipping facilities and rolling stock of federal railway transport with primary fire extinguishing means

M788-1070: Guidelines for categorizing and classifying premises of stationary acid and alkaline batteries (as amended in 2001)

M788-1076: Fire Safety Design Manual for Electrical Rooms and Cable Structures Within Industrial Occupancies

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP 21-01-97: Fire Prevention

MDS 11-16.2002: Guidelines for drafting an engineering plan for civil defense

MDS 11-3.99: Recommended Practice for Conformity Assessment of Feasibility Studies (Projects) for Construction of Nonindustrial Facilities

MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures

MDS 21-3.2001: Method for and Examples of Feasibility Study for Fire Protection Measures for SNIP 21-01-97*

MDS 31-9.2003: Orthodox churches. Volume 2. Orthodox churches and complexes. Allowance for design and construction (to SP 31-103-99)

MDS 41-2.2000: Instruction on the lokation of termal units used for heating and hot water-supply in singl-apartment or semi-detached houses

MGSN 5.02-99: Design of Urban Bridge Structures

MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE

MI 2825-2003: Oil quantity and quality ratio measurement system. Metrological and technical design requirements

NPB 105-03: Determination of categories of rooms, buildings and external installations on explosion and fire hazard

NPB 108-96: Structures Occupied for Religious Purposes. Fire Protection Requirements

NPB 110-96: The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing and fire detection installation

NPB 110-99: The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing units and automatic fire alarm

NPB 111-98*: Gas stations. Fire safety requirements

NPB 114-2002: Fire protection of nuclear power plants. Design standards

NPB 160-97: Signal colors. Fire safety signs. Types, dimensions and general technical requirements.

NPB 166-97: Fire engineering. Fire extinguishers. Requirements of exploitation

NPB 21-98: Automatic gas-aerosol fire extinguishing installations. Standards and Rules of design and application

NPB 22-96: Automatic gas fire fighting facilities. rules and regulations for designing and application

NPB 252-98: Heat-generating appliance, using various kinds of fuel. Fire safety requirements. Test methods.

NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules

NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry

NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry

NTP 17-99*: Norms of technological design of systems for removal and preparation for the use of manure and litter

NTP STsB/MPS-99: Standards for technological design of automation and remote control devices at the federal railway transport

NTP TsTKS-FZhT-2002: Standards for technological design of digital telecommunication networks in the federal railway transport

NTP-APK 1.10.01.001-00: Engineering Design Standards for Cattle Farms

NTP-APK 1.10.02.001-00: Engineering Design Standards for Hog Farms

NTP-APK 1.10.03.001-00: Engineering Design Standards for Sheep Breeding Facilities

NTP-APK 1.10.03.002-02: Engineering Design Standards for Goat Breeding Facilities

NTP-APK 1.10.04.001-00: Engineering Design Standards for Horse Raising Facilities

NTP-APK 1.10.04.002-02: Engineering Design Standards for Camel Breeding Facilities

NTP-APK 1.10.04.003-03: Standards for technological design of equestrian complexes

NTP-APK 1.10.05.001-01: Engineering Design Standards for Poultry Raising Facilities

NTP-APK 1.10.06.001-00: Engineering Design Standards for Fur Farms and Rabbit Farms

NTP-APK 1.10.06.002-01: Norms of technological design of enterprises of low power of animal husbandry and rabbit farms

NTP-APK 1.10.09.001-02: Standards for technological design of breeding complexes and reproduction greenhouses

NTP-APK 1.10.10.001-02: Engineering Design Standards for Grain Seed Companies and Small-Capacity Grain Processing Facilities

NTP-APK 1.10.12.001-02: Engineering Design Standards for Facilities for Storage and Processing of Potatoes and Fruit and Vegetable Products

NTP-APK 1.10.13.003-03: Technological design standards for pesticide stores

NTP-APK 1.10.14.001-01: Standards for technological design of astrakhan preprocessing centers

NTP-APK 1.10.16.001-02: Engineering Design Standards for Livestock Raising Farms and Complexes

NTP-APK 1.10.16.002-03: Norms of technological design of agricultural enterprises for the production of animal feed

NTP-APK 1.10.17.001-03: Standards for technological design of bases and warehouses for general-purpose enterprises for resource provision

NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry

ONTP 09-96: Sectoral norms of technological design of enterprises in the automotive industry. Assembly and welding shops

ONTP 10-99: Classification of buildings and premises of enterprises by explosion and fire hazards. Fire safety requirements

ONTP 14-96 (II): Sectoral norms of technological design of enterprises in the automotive industry. Assembly shops

Order 222/59: On the procedure for the development of a safety declaration for an industrial facility of the Russian Federation

OSN-APK 2.10.14.001-04: Standards for the design of administrative, household buildings and premises for livestock, animal and poultry farms and other agricultural facilities

OSN-APK 2.10.22.001-04: Instructions for the use of local insulation materials in the construction of livestock buildings

OSN-APK 2.10.24.001-04: Lighting standards for agricultural enterprises, buildings and structures

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 290.004-02: Rules of air division product production design.

OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval

PB 05-351-00: Rules for the examination of industrial safety of projects of fire protection of coal mines, hazardous production facilities of the coal industry

PB 05-618-03: Coal Mine Safety Regulations

PB 05-619-03: Safety Requirements for Development of Coal Deposits by Opencast Method

PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises

PB 09-170-97: General rules on explosion safety for explosive- and fire-hazardous chemical, petrochemical plants and oil refineries

PB 09-220-98: Installation and Safe Operation Requirements for Ammonia-Based Refrigeration Equipment

PB 09-297-99: Rules of setup and safe operation of compressor units with piston compressors operating on dangerously explosive and noxious gases

PB 09-310-99: Industrial safety regulations for refinery plants

PB 11-149-97: Safety Requirements for Production of Aluminum Oxide, Aluminum, Magnesium, Crystalline Silicon, and Electrothermal Silicon-Aluminum Alloy

PB 11-219-98: Safety Requirements in Coke Byproducts Operations

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PB 12-245-98: Safety Requirements for Gas Supply Facilities

POT R M-004-97: Intersectoral labor protection regulations for the use of chemicals

POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals

POT R M-006-97: Intersectoral labor protection rules for cold metal processing

POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products

POT R M-013-2000: Industry-Wide Occupational Safety and Health Requirements for Chemical Cleaning and Washing

POT R M-015-2000: Intersectoral labor protection regulations for the operation of freon refrigeration units

POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings

POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals

POT R M-020-2001: Industry-Wide Occupational Safety and Health Requirements for Electric Welding and Gas Welding Operations

POT R M-022-2002: Intersectoral rules on labor protection during soldering and tinning of products

POT R M-025-2002: Intersectoral rules on labor protection during the operation of water supply and sewer facilities

POT R M-027-2003: Intersectoral rules on labor protection in road transport

POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry

POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry

POT R O-14000-004-98: Regulation

PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Applications

PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)

R 2.6.4/3.5.4.1040-01: General Requirements for Technological Regulations for Radiation Sterilization of Disposable Medical Devices

R 3112199-1094-03: Guidelines for the organization of operation of LPG vehicles running on liquefied petroleum gas

RD 009-01-96: Automatic Fire Protection Systems. Maintenance Requirements

RD 03112194-1095-03: Guidelines for the organization of operation of gas-cylinder vehicles operating on compressed natural gas

RD 03-129-96: Procedure for Development of a Safety Declaration for a Facility in the Russian Federation

RD 03-357-00: Methodical recommendations for declaration of industrial safety of hazardous production facilities

RD 05-365-00: Instructions for the development of a project of coal mine fire protection

RD 05-366-00: Instructions for the design of fire-irrigation water supply

RD 09-251-98: Provision on procedure of formulation and content of section “safety operation of production plant” of process regulations

RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities

RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants

RD 153-39.4-056-00: Main crude pipeline. Operations rules.

RD 153-39.4-073-01: Model Emergency Response Plan at Main Oil Product Pipelines

RD 153-39.4-113-01: Standards for technological design of main pipelines

RD 31.3.05-97: Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997

RD 3112199-1069-98: Fire safety requirements for companies operating vehicles on compressed natural gas

RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95

RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97

RD 45.120-2000: Engineering standards. Urban and rural telephone networks. НТП 112-2000.

RD 45.162-2001: Complexes of cellular and satellite mobile communication public networks.

RD 51-0158623-07-95: The use of a new generation of power plants with a piston and gas turbine drive

RD EO 0052-00: Diesel generator sets for nuclear power plants. General specifications

RD EO 0356-02-2002: Technical Requirements for the Design of Storage for Packages of Solid and Hardened Radioactive Waste in Reinforced Concrete Protective Non-Returnable Containers of the NZK-150-1.5P Type

RD-APK 1.10.15.02-08: Guidelines for technological design of disposal systems and preparation for the use of manure and litter

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RMG 101-2010: State system for ensuring the uniformity of measurements. Petroleum quantity and parameters of quality measurements systems. Metrological and technical specifications to the designing

RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements

Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)

SNiP 2.10.02-84: Agricultural Products Storage and Processing Facilities

SNiP 2.10.03-84: Cattle-breeding poultry and fur-farming buildings and premises

SNiP 2.11.02-87: Refrigerators

SNiP 31-03-2001: Production buildings

SNiP 31-04-2001: Storage buildings

SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)

SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.

SO 34.49.101-2003: Regulations on the design of fire protection of power enterprises

SP 11-107-98: Procedure of Development and Composition of the “Engineering and Technical Measures of Civil Defense. Measures for Prevention of Emergencies” Section of Construction Projects

SP 11-112-2001: The procedure for development and composition of the section "Engineering civil defence measures. Measures for the prevention of emergencies" for urban planning documentation for the areas of urban and rural settlements and other municipality subjects

SP 11-113-2002: The reporting on the engineering civil defence measures and activities to prevent emergencies in the preparation of an application of intent to invest in the construction and justification of investment in the construction of enterprises, buildings and structures

SP 112.13330.2011: Fire safety of buildings and works

SP 113.13330.2011: PARKINGS

SP 12-133-2000: Safety in construction. Statutes on the procedure for certification of work stations by working conditions in construction and housing and utilities.

SP 21-104-98: Design of the systems of fire protection for tank farms

SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85

SP 41-104-2000: Design of independent heat supply sources

TSN 12-309-97 SO: Lightweight partitions

TSN 21-301-2001: Passenger Motor Vehicle Parking Facilities

TSN 21-301-96: Passenger Vehicle Parking Facilities

TSN 31-309-98: Car parks. Design Standards. Nizhny Novgorod

TSN 31-311-98: Buildings for Social Security Institutions

TSN 31-312-98: Local construction normatives. Bank buildings

TSN 31-316-99: Local construction normatives. Hotels

TSN 31-317-99: Cultural and entertainment facilities

TSN 41-302-2000: Heating, Ventilating, and Air-Conditioning Systems

VNP 001-01: Industry-Specific Design Standards. Buildings for Territorial Main Administrations, National Banks, and Clearing Centers of the Russian Federation Central Bank

VNP-10041-2002: Departmental norms and rules for creating coastal fishing enterprises. Treatment facilities

VNTP 05-97: Definition of categories of premises and buildings of enterprises and objects of railway transport according to explosion and fire hazard

VNTP 311-98: Departmental standards of technological design. Postal facilities

VNTP 4-00: Determination of explosion and fire hazard classes of premises, buildings and outdoor installation of oil products pipeline transportation facilities

VPPB 01-05-99: Fire code for operation oil mains of JSC Transneft

VRD 39-1.10-005-2000: Ordinance on Operation of Gas Distribution Stations of Trunk Gas Pipelines

VRD 39-1.10-069-2002: Provisions on technical operation of gas distribution stations of gas mains

VRD 39-1.12-067-2002: Operating procedure regulation for the production of output of gas processing plants and refineries

VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)

VSN 13-2002: Instructions for the design of fire and explosion hazardous production of alcohol, alcoholic beverage and brandy enterprises of the food industry

VSN 21-02-01/MO RF: Automatic gas fire extinguishing installations of the armed forces of the Russian Federation. Norms and design rules

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!