GOST 8713-79

ГОСТ 8713-79

Flux welding. Welded joints. Maih types design elements and dimensions

Сварка под флюсом. Соединения сварные Основные типы, конструктивные элементы и размеры

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 2074 dated 03.07.90

The standard applies to compounds made of steel as well as alloys on iron-nickel and nickel bases, performed by submerged-arc welding, and establishes the main types, structural elements and dimensions of welded connections. The standard does not apply to welded joints of steel pipelines. in accordance with GOST 16037.

Стандарт распространяется на соединения из сталей, а также сплавов на железоникелевой и никелевой основах, выполняемых сваркой под флюсом, и устанавливает основные типы, конструктивные элементы и размеры сварных соединений. Стандарт не распространяется на сварные соединения стальных трубопроводов. по ГОСТ 16037.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 44

Approved: USSR State Committee for Standards, 12/26/1979

SKU: RUSS16877

Price: $213.84




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Welding regulations » Welding work »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding materials » Fluxes »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V05 Welding and cutting of metals. Soldering, riveting »


As a Replacement Of:

GOST 8713-70: Seams of welded connections. Automatic and semi-automatic submerged arc welding. Main types and structural elements

The Document References:

GOST 11969-79: Fusion welding. Basic positions and their designations

GOST 11969-93: Weld seams. Provisions for welding. Definitions and notations of angle of bend and rotation

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

The Document is Referenced By:

ATK 24.218.02-90: Reinforcing Rings for Vessels and Apparatus. Design, Dimensions, and Technical Requirements

ATK 26-18-14-98: Flanges of vessels and apparatus steel flat welded to a conditional pressure up to Ru 0.1 MPa. Design, dimensions and general technical requirements

GOST 10272-77: Double entry centrifugal pumps. Specification

GOST 10512-78: Magnetic and electromagnetic separators. Specification

GOST 11379-80: Dynamic Pumps for waste liquids. General specifications

GOST 12367-85: Tube mills of grinding units. General technical specifications

GOST 12393-2013: Line fittings for overhead system of railways. General common requirements

GOST 12393-2019: Rail contact network fittings linear. General specifications

GOST 12393-77: Fittings for overhead system of electric railways. General specifications

GOST 13276-79: Overhead line hardware. General specifications

GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications

GOST 13950-91: Welded and folded steel barrels

GOST 13981-77: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 1561-75: Air reservoirs for railway car automatic brakes. Specifications

GOST 16140-77: Collapsible racks. Specifications

GOST 17032-2010: Horizontal steel tanks for petroleum products. Specifications

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 18896-73: Steel thick-walled drums for chemical products. Specifications

GOST 19740-74: Vertical centrifugal pumps

GOST 20259-80: Universal containers

GOST 20572-83: Two-screw pumps and pump units. Specification

GOST 20791-83: Centrifugal glandless electric pumps. Technical requirements

GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds

GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods

GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications

GOST 21807-76: Concrete mixture conveying buckets to 2 cub m volume. General specifications

GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications

GOST 22130-86: Steel Pipeline Parts Movable supports and suspensions Specifications

GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications

GOST 22661-77: Grapples for containers with a gross weight of 3.0, 5.0, and 6.0 metric tons

GOST 22779-77: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps. Basic parameters and dimensions. Technical requirements

GOST 23092-78: Sectional pallet box for topographical maps. Specifications

GOST 23118-2012: Building steel structures. General specifications

GOST 23118-78: Structural metalwork. General specifications

GOST 23118-99: Steel construction structures General Technical Specifications

GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications

GOST 23478-79: Form for monolithic concrete and reinforced concrete structures erection. Classification and general technical requirements

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 26155-84: Barrels from corrosion-resistant steel

GOST 26429-2018: Steel structures of suspended transport tracks. Specifications

GOST 26429-85: Steel structures of suspended transport tracks. Specifications

GOST 28759.5-90: Flanges of vessels and apparatuses

GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design

GOST 30245-2003: Steel bent closed welded square and rectangular section for building constructions. Specifications

GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications

GOST 30245-94: Roll-formed steel welded closed square or rectangular sections designed for use in steel structures

GOST 30765-2001: Metal transport packagings. General specifications

GOST 30894-2003: Production well head equipment. General technical requirements

GOST 31.0151.01-90: Universal and special-purpose setters

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding

GOST 31173-2003: Steel doors. Specifications

GOST 31174-2003: Gates of metall. General specifications

GOST 31174-2017: Gates of metall. General specifications

GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing

GOST 31831-2012: Centrifugal dust collectors. Safety requirement and methods of testing

GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods

GOST 31837-2012: Abcorptive gas purifiers. Safety requirements and test methods

GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33810-2016: Metal barrels for food liquids. Specifications

GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34329-2017: Formworks. General specifications

GOST 34433-2018: Trunk pipelines for oil and oil products transportation. Transformer complete substations with voltage from 35 to 220 kV. General specifications

GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 34587-2019: Hoisting cranes. Metal constructions. Manufacturing requirements

GOST 3849-78: Accessories for vertical cylindrical strorace tank for pertoleum products. Cast iron joints for swing tube

GOST 5464-75: Pontoons of pressure floating mud pipelines and pipelines. General specifications

GOST 5465-75: Ball joints for floating and soil pressure pipelines

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 7496-84: Beet harvesters

GOST 7890-84: Travelling single-girder suspended cranes. Specifications

GOST 7890-93: Travelling single girder suspended cranes. Specifications

GOST 9078-84: Flat pallets

GOST 9570-2016: Box and pestpallets. General specifications

GOST 9570-84: Box and post pallets

GOST R 50059-92: Travelling single-girder suspended cranes. Specifications

GOST R 50608-93: Refrigerating equipment. Steel apparatus. Welded joints. Technical requirements and checking methods

GOST R 51177-2017: Overhead line hardware. General technical requirements

GOST R 51177-98: Overhead line hardware. General specifications

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking

GOST R 51562-2000: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

GOST R 51707-2001: Electrostatic precipitators. Safety requirement and methods of testing

GOST R 51708-2001: Centrifugal dust collectors. Safety requirement and methods of testing

GOST R 51878-2002: Adsorptive gas cleaners. Safety requirements and test methods

GOST R 52085-2003: Formworks. General specifications

GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions

GOST R 52267-2004: Metal barrels for food liquids. Specifications

GOST R 52400-2005: Air reservoirs for railway brakes. General specifications

GOST R 52445-2005: Absorptive gas purifiers. Safety requirements and test methods

GOST R 52664-2006: Welded pipe sheet piles. General specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments

GOST R 54439-2011: Gas fired central heating boilers. Type B boilers of nominal heat input not exceeding 300 kW, but not exceeding 1000 kW

GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure

GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification

GOST R 56400-2015: Petroleum and natural gas industries. Design and operation of offshore terminals of liquefied natural gas. General requirements

GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications

GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements

GOST R 58935-2020: Forms for the manufacture of reinforced concrete vibrohydropressed pressure pipes. Specifications

ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction

MDK 4-04.2002: Model Guidelines for Operation of Hot Water Storage Tanks in Public Piped Heat Supply Systems

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 53-1.2001: Recommended Practice for Installation of Steel Structural Elements

NPB 188-2000: Fire aerial ladder. General technical requirements. Test methods

NPB 197-2001: Fire elevators. General technical requirements. Test methods

NPB 314-2003: Firefoam elevators. General technical requirements. Test methods

OST 102-55-81: Parts of trunk pipelines, steel welded on Ru to 10.0 MPa (100 kgf

OST 108.030.30-79: Stationary structural steel boilers. General specifications.

OST 108.030.45-82: Tubular air heaters for stationary boilers. General Specifications.

OST 108.101.102-76: Water-steam heaters. Forward water chambers (with flat bottom, two-way). Design and dimensions.

OST 108.101.103-76: Water-steam heaters. Forward water chambers (with flat bottom, four-way). Design and dimensions.

OST 108.101.104-76: Water-steam heaters. Forward water chambers (with elliptic bottom, two-way). Design and dimensions.

OST 108.101.105-76: Water-steam heaters. Forward water chambers (with elliptic bottom, four -way). Design and dimensions.

OST 108.101.111-76: Water-steam heaters. Covers. Design and dimensions.

OST 108.313.102-76: Water-steam heaters. Casings. Branch pipes with flanges. Design and dimensions.

OST 108.838.01-75: Continuous blowdown separator of nominal diameter 800. Design and technical requirements.

OST 24.030.45-74: Air heaters tubular steam stationary boilers. General technical conditions

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 24.895.03: Wedge jacks, mechanical and hydraulic. Parameters, basic dimensions, technical requirements

OST 24.940.09-74: Welded joint seams. Main types and design elements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-04-2384-79: Transportation plugs for working P 0 MPa (0 kg/cm2). Design and dimensions.

OST 26-04-2385-79: Transportation plugs for working P 0 MPa (0 kg/cm2), working P 0.04 MPa (0.4 kg/cm2). Design and dimensions.

OST 26-04-2386-79: Lugged transportation plugs for working P 0 MPa (0 kg/cm2). Design and dimensions.

OST 26-04-2388-79: Welding by melting of the steels. Welded connections. Types, constructive elements and dimensions.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 26-2091-93: Horizontal support vessels and equipment. Design.

OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.

OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements

OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-58-81: Steel building structures. Welding. Basic requirements.

OST 36-60-81: Welding at installation of steel building constructions. Main provisions.

OST 36-62-81: Hoisting equipment. General technical requirements.

OST 95 10440-2002: Equipment for radioactive environments. Welded joints. Types and dimensions and structural elements.

PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products

PGVU 021-92: Unified dust and air duct elements. Welded assemblies of blocks and elements of ducts of dust and gas air ducts of thermal power plants. Design and dimensions

PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 102-002-88: Machines, tools and equipment for pipeline construction. Designing and manufacturing.

RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 22-207-88: Lifting machines. General requirements and production standards

RD 22-326-97: Self-propelled jib cranes and loader cranes. Overhaul. General technical conditions

RD 24.090.97-98: Materials handling equipment. Requirements for construction, repair and reconstruction of steel structures of cranes.

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

RD 26.260.225-2001: Bodies of cylindrical vessels and devices. Technology, quality assurance

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.10.130-96: Instructions for visual and measuring control.

RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities

RD 34.21.526-95: Model Guidelines for Operation of Metal Tanks for Storage for Liquid Fuel and Hot Water

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

RD 5.0679-91: Certification of welders and gas cutters. rules

RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications

RD RTM 0352-76-81: Methods of welding in the manufacture of vessels and apparatus

RD RTM 26-07-246-80: Design, manufacturing and control regulations for steel pipeline fittings welded joints.

RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises

RST RSFSR 655-81: Ice screws fishing. General technical conditions

RTM 108.940.08-85: Welded structures of power equipment. General requirements for structural and process design

RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers

RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units

SNiP 3.03.01-87: Bearing and enclosing structures

SNiP 3.06.04-91: Bridges and pipes

SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.

SNiP II-V.3-62: Steel structures. Design Standards

SP 16.13330.2011: Steel structures

SP 294.1325800.2017: The construction of steel. Design rules

SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation

SP 46.13330.2012: Bridges and pipes

SP 470.1325800.2019: Steel structures. Work Rules

SP 53-101-98: Manufacturing and quality control of steel structures for construction

SP 53-102-2004: General rules for steel structure design

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions

STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TU 102-314-81: Boxing unified for production and auxiliary buildings of land objects of the oil and gas industry

TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist

TU 26-01-355-80: Electrolyzers. Type of SPP with component equipment

TU 35-1757-87: Buildings spanning railway bridges with riding on top on the ballast of box section Lp = 33.6 m; 45.0 m. Specifications

TU 36-2009-77: Steel structures of steel vertical cylindrical tanks with a capacity from 100 to 20,000 m3 for the storage of oil and oil products. Technical conditions

TU 36-2287-80: Bent closed welded square and rectangular profiles

TU 36-26-11-4-89: Steel building construction, vertical cylindrical tanks for oil and petroleum products with a volume of 100 to 50,000 m3. Technical conditions

TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them

VSN 39-87: Ordinance for Planned Preventive Maintenance and Operation of Production Equipment at Construction Industry Companies Administered by the USSR Gosagprom. Part 1

VSN 41.88: Design of ice-resistant stationary platforms

VSN 416-81: General Specified Quantity Allowances for Building Materials. Compendium 30: Welding Operations

VSN 452-84: Production rates of consumption of materials in construction. Welding pipes made ??of alloy steel, automatic submerged arc welding of sheet structures, welding rods and valve inserts, gas cutting

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Technical regulations of the Eurasian Economic Union "On requirements for fire safety and fire extinguishing means"
Language: English
Price: $126.72
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62
General requirements for machines, instruments and other industrial products as to environment mechanical stability
Language: English
Price: $175.23
Safety rules for ground storage of liquid ammonia
Language: English
Price: $145.53
Radio communications. Broadband wireless access equipment. Requirements for the radio spectrum parameters, electromagnetic compatibility and safety
Language: English
Price: $1,318.92

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!