GOST 12.2.003-91

ГОСТ 12.2.003-91

Industrial equipment. General safety requirements

Система стандартов безопасности труда. Оборудование производственное. Общие требования безопасности

Status: Valid - Supersedes

The standard applies to production equipment used in all sectors of the national economy and establishes general safety requirements, which are the basis for setting safety requirements in standards, technical conditions, operational and other design documents for production equipment of specific groups, types, models (brands). The standard does not apply to production equipment, which is a source of ionizing radiation.

Стандарт распространяется на производственное оборудование, применяемое во всех отраслях народного хозяйства, и устанавливает общие требования безопасности, являющиеся основой для установления требований безопасности в стандартах, технических условиях, эксплуатационных и других конструкторских документах на производственное оборудование конкретных групп, видов, моделей (марок). Стандарт не распространяется на производственное оборудование, являющееся источником ионизирующих излучений.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: USSR State Committee for Product Quality and Standards Management, 6/6/1991

SKU: RUSS16887

Price: $80.19




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »


As a Replacement Of:

GOST 12.2.003-74: Occupational safety standards system. Industrial equipment. General safety requirements

The Document References:

GOST 12.2.003-74: Occupational safety standards system. Industrial equipment. General safety requirements

The Document is Referenced By:

ATK-RE 2004: Shell and tube heat exchangers and "pipe in pipe" heat exchangers. Manual

ATK-RE 2011: Shell and tube heat exchangers and "pipe in pipe" heat exchangers. Manual

ATK-RE 2013: Shell-and-tube heat exchangers and pipe-in-tube heat exchangers manufactured according to TU 3612-005-00220302, TU 3644-006-00220302, TU 3612-017-00220302, TU 3612-013-00220302, TU 3612-014-00220302, TU 3612-013 023-00220302, TU 3612-024-00220302, TU 3612-100-00220302. Manual

GKINP 15-236-91: Instructions for printing processes in kartoizdaniya

GOST 10037-83: Autoclaves for building industry

GOST 10141-91: Rod and ball mills

GOST 10199-2017: Feed concentrates for sheep and goats. General technical conditions

GOST 10223-97: Weighing batchers of periodic operation

GOST 10287-83: Dc electric meters

GOST 10385-2014: Combined feeding staffs for fishes. General specifications

GOST 10512-93: Magnetic and electromagnetic separators

GOST 10580-2006: Technological foundry equipment. General specifications

GOST 10632-2014: Wood particle boards. Specifications

GOST 10700-97: Waste paper and board. Specifications

GOST 10791-2004: All-rolled wheels. Specifications

GOST 10935-97: Box-cars for 1520 mm gauge main line railways. General specifications

GOST 11004-84: Principal ventilation mine blowers

GOST 11130-2013: Peat and products of its processing. Methods for determination of smalls content and impurities

GOST 12.1.008-76: Occupational safety standards system. Biological safety. General requirements

GOST 12.1.013-78: Occupational safety standards system. Construction. Electrical safety. General requirements

GOST 12.1.041-83: Fire and explosion safety of combustible dusts

GOST 12.1.044-2018: Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.2.004-75: Occupational safety standards system. Special machines and devices for pipe-line building. Safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements

GOST 12.2.007.9-93: Electric heating equipment safety

GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal

GOST 12.2.009-80: Metalworking machines

GOST 12.2.009-99: Metal-working machines. General safety requirements

GOST 12.2.010-75: Occupational safety standards system. Pneumatic Hand Machines. General safety requirements

GOST 12.2.011-2012: Occupational safety standards system. Building, road and earth-moving machinery. General safety requirements

GOST 12.2.011-75: Construction and road machines

GOST 12.2.017.4-2003: Sheet-bending presses. Safety requirements

GOST 12.2.017-93: The forging and pressing equipment general safety requirements

GOST 12.2.019-2005: Occupational safety standards system. Agricultural tractors and self-propelled machines. General safety requirements

GOST 12.2.019-2015: Occupational safety standards system. Tractors and agricultural machinery. General safety requirements

GOST 12.2.019-86: Agricultural tractors and self-propelled machines

GOST 12.2.022-80: Conveyers.

GOST 12.2.026.0-2015: Woodworking machinery. Construction safety requirements

GOST 12.2.026.0-93: Woodworking equipment safety requirements for design

GOST 12.2.037-78: Fire engineering. Safety requirements

GOST 12.2.040-79: Positive-displacement hydraulic drives and lubricating systems. General safety requirements for construction

GOST 12.2.042-2013: Occupational safety standards system. Machines and technological equipment for live-stock-raising and forage production. General safety requirements

GOST 12.2.042-91: Occupational safety standards system. Machines and technological equipment for livestock raising and forage production.

GOST 12.2.045-94: The equipment for production of rubber-technical products

GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements

GOST 12.2.048-80: Occupational safety standards system. Saws and flat knives sharpening machines. Safety requirements

GOST 12.2.051-80: Occupational safety standards system. Technological ultrasonic equipment. Safety requirements

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 12.2.055-81: Ferrous and nonferrous scrap and waste metal processing equipment

GOST 12.2.056-81: Occupational safety standards system. Electric and diesel locomotives for 1520 mm gauge. Safety requirements

GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places

GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors

GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements

GOST 12.2.071-90: Container cranes

GOST 12.2.072-98: Industrial robots. Robotized technological systems. Safety requirements and testing methods

GOST 12.2.084-93: Occupational safety standards system. Machines and equipment for laundries and dry-cleaning enterprises. General safety requirements

GOST 12.2.088-2017: Standards system of labour safety. Ground equipment for well repair and realization. General safety requirements

GOST 12.2.088-83: Standards system of labor safety. Ground equipment for well repair and realization. Safety general requirements

GOST 12.2.092-94: Occupational safety standards system electromechanical and electrical heating equipment for the catering industry

GOST 12.2.094-83: Occupational safety standards system. Rolling equipment. General safety requirements

GOST 12.2.099-84: Occupational safety standards system. Aggregates for steel smelting. General safety requirements

GOST 12.2.100-97: Machines and equipment for manufacturing clau and lime brick, ceramic and asbestos cement products. General safety requirements

GOST 12.2.102-2013: Occupational safety standards system. Machines and equipment for timber logging and floating. Safety requirements, control methods for safety requirements and evaluation of labour safety

GOST 12.2.105-84: Occupational safety standards system. Mineral processing equipment. General safety requirements

GOST 12.2.106-85: Occupational safety standards system. Machines and mechanisms for mining of ore, non-ore and placer deposits. General hygienic requirements and methods of testing

GOST 12.2.111-85: Mounted and trailed agricultural machines

GOST 12.2.112-86: Occupational safety standards system. Mine electric locomotive transport. General requirements for rolling stock

GOST 12.2.113-2006: Crank presses. Safety requirements

GOST 12.2.113-86: Crank presses

GOST 12.2.114-86: Screw presses

GOST 12.2.115-2002: Operation safety standard system. Blow-out preventers. Safety requirements

GOST 12.2.115-86: Occupational safety standards system. Blowout preventer equipment. Safety requirements

GOST 12.2.116-2004: Three- and four-roller plate-bending machines. Safety requirements

GOST 12.2.116-86: Three and four roll plate bending machines

GOST 12.2.118-2006: Shears. Safety requirements

GOST 12.2.119-88: Occupational safety standards system. Rotary and rotary conveyor automatic lines. General safety requirements

GOST 12.2.121-2013: Occupational safety standards system. Industrial tractors. General safety requirements

GOST 12.2.123-90: Textile machinery

GOST 12.2.124-2013: Occupational safety standards system. Alimentary product equipment. General safety requirements

GOST 12.2.124-90: The food industry equipment

GOST 12.2.125-91: On-land cable equipment

GOST 12.2.132-93: Occupational safety standards system. Oil Extraction Wellhead Equipment. General Safety Requirements

GOST 12.2.133-94: Operation safety standard system. Vacuum fluid circular compressors and pumps. Safety requirements

GOST 12.2.135-95: Equipment for processing of meat and poultry farming products

GOST 12.2.136-98: Occupational safety standards system. Sucker-rod pumping ground equipment. Safety requirements

GOST 12.2.138-97: Industrial sewing machines

GOST 12.2.139-97: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST 12.2.140-97: Small tractors, powered blocks and motor cultivators. General requirements for safety

GOST 12.2.228-2004: Occupational safety standards system. Tools and service work-over rigs for work-over of oil wells. Safety requirements

GOST 12.2.231-2012: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods

GOST 12.2.232-2012: Occupational safety standards system. Surface drilling equipment. Safety requirements

GOST 12.2.233-2012: Occupational safety standards system. Refrigerating equipment of refrigerating capacity over 3,0 kW. Safety requirements

GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.

GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.005-75: Painting works

GOST 12.3.006-75: Occupational safety standards system. Operation of water supply and sewerage systems. General safety requirements

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.3.014-90: Occupational safety standards system. Manufacture of pressed wood shaving plates. General safety requirement

GOST 12.3.015-78: Occupational safety standards system. Logging operations. Safety requirements

GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements

GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements

GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety

GOST 12.3.023-80: Diamond tools, treatment processes of materials

GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements

GOST 12.3.026-81: Occupational safety standards system. Forge-pressing. Safety requirements

GOST 12.3.027-2004: Foundry work. Safety requirements

GOST 12.3.027-92: Foundry work

GOST 12.3.028-82: Processes of treatment materials by abrasive and borazon tools

GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing

GOST 12.3.031-83: Occupational safety standards system. Work with mercury. Safety requirements

GOST 12.3.034-84: Occupational safety standards system. Wood protection works. General safety requirements

GOST 12.3.035-84: Construction. Painting. Safety requirements

GOST 12.3.036-84: Occupational safety standards system. Flame machining of metals. Safety requirements

GOST 12.3.037-84: Occupational safety standards system. Use of fertilizers in agriculture and forestry. General safety requirements

GOST 12.3.038-85: Occupational safety standards system. Construction. Works on thermal instulation of equipment and pipe lines. Safety requirements

GOST 12.3.039-85: Occupational safety standards system. Plasma treatment of metals. Safety requirements

GOST 12.3.040-86: Occupational safety standards system. Construction. Roofing and water proofing. Safety requirements

GOST 12.3.042-88: Occupational safety standards system. Woodworking manufacture. General safety requirements

GOST 12.3.046-91: Occupational safety standards system. Automatic fire-fighting sets. General technical requirements

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 12072.0-79: Cadmium. General requirements for methods of analysis

GOST 12183-2018: Rye-wheat and wheat-rye whole bakery flour. Specifications

GOST 12302-2013: Packs made of polymeric films and composite materials. General specifications

GOST 12367-85: Tube mills of grinding units. General technical specifications

GOST 12376-71: Single rotor crusher for medium and small grinding. Specifications

GOST 12549-80: Passenger cars of mainline railways track 1520(1524) mm gauge. Painting. Technical requirements

GOST 12645.0-83: Indium. General requirements for methods of analysis

GOST 13.1.120-99: Reprography. Micrography. Microforms with vesicular films. General technical requirements and methods of control

GOST 13.1.305-93: Reprography. Micrography. Diazotype films. General specifications

GOST 13.1.401-2001: Reprography. Micrography. Cameras. Technical requirements

GOST 13.1.512-97: Reprography. Micrography. Readers. General specifications

GOST 13.2.001-2001: Reprography. Copyrography. Electrophotographic document copying machines. General technical requirements

GOST 1341-2018: Vegetable parchment. Specifications

GOST 13448-82: Plastic ventilation grilles. Technical conditions

GOST 13529-93: Self-acting individual valves of circular form for piston compressors. Types and fitting dimensions

GOST 14109-2016: Biological medicine remedies for veterinary use. Mallein. Specification

GOST 14180-80: Ores and concentrates of non-ferrous metals. Methods for sampling and preparation of samples for chemical analysis and determination of moisture

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 14940-96: Bleached sulphate pulp made of deciduous (aspen) wood. Specifications

GOST 15035-80: Underground scraper winches

GOST 15518-87: Lamellar heat exchangers

GOST 15607-84: Baudot code start-stop apparatuses for alphabetic telegraphy

GOST 15850-84: Mine parachutes for cages

GOST 15851-84: Suspension devices for mine cages

GOST 1625-2016: Formalin for industrial use. Specifications

GOST 16446-2012: Dry complement for the complement fixation test. Specification

GOST 16469-2017: Canal excavators. General specific

GOST 16469-79: Canal excavators

GOST 16569-86: Burners for domestic gas heaters

GOST 16837-79: Flameproof mine power transformers. General specifications

GOST 16844-93: Vibration

GOST 16990-2017: Rye. Technical conditions

GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement

GOST 17404-2017: Serum sapna for complement fixation reaction. Technical conditions

GOST 17405-2016: Biological medicine remedies for veterinary use. Glanders antigen designed for carrying out the complement-fixation reaction. Specification

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18221-2018: Mixed full-ration feeds for poultry. General specifications

GOST 18576-96: Non-destructive testing. Railway rails. Ultrasonic testing methods

GOST 18962-86: Floor-mounted machines of railless electric transport

GOST 18962-97: Vehicles, floor, trackless battery-powered

GOST 19716-81: Automatic pneumatic rapier looms

GOST 20054-2016: Concrete non-pressure pipes. Specifications

GOST 20680-2002: Mechanical mixing devices (agitated vessels). General specifications

GOST 20680-86: Vertical apparatuses with mechanical mixers

GOST 20689-80: Stationary steam turbines for compressor and supercharger drive

GOST 2081-2010: Carbamide. Specifications

GOST 21021-2000: Numerical control units. General technical requirements

GOST 21021-85: Digital programmed control devices

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21204-83: Gas burners. Classification. General requirements, marking, and storage

GOST 21204-97: Industrial gas burners. General technical requirements

GOST 21694-94: Mechanical welding equipment

GOST 21889-76: Man-machine system. Operator's arm-chair. General ergonomic requirements

GOST 22045-89: Overhead travelling single-beam cranes. Specifications

GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications

GOST 22246-84: Auxiliary and emergency marine diesel-generators

GOST 22391-2015: Sunflower. Specifications

GOST 22519.0-77: Thallium. General requirements for the methods of analysis

GOST 22584-88: Rope electric hoists. Specifications

GOST 22584-96: Electric rope hoists

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 22983-2016: Millet. Specification

GOST 23050-2012: Virus vaccine against Aujeszky disease cultural dry. Specification

GOST 23308-78: Radiochemical hoods. General technical requirements

GOST 23309-78: Boxes radiation-protective. General technical requirements

GOST 23421-79: Device for palletized haulage of silica bricks by trucks. Main parameters and dimensions. Technical requirements

GOST 23423-2017: Methionine feed. Technical conditions

GOST 23745-2014: Product for reproduction. Fresh non-diluted sperm of bulls. Specifications

GOST 23833-95: Commercial refrigeration equipment

GOST 24.501-82: Road transport automatic systems. General requirements

GOST 24005-80: Stationary natural-circulation steam boilers

GOST 24028-2013: Internal combustion reciprocating engines. Visible pollutants. Limit values and test methods

GOST 24028-80: Marine, locomotive and industrial diesel engines. Exhaust smoke opacity. Standard values and testing methods

GOST 24032-80: Mine instruments for gas analysis. General technical requirements. Testing methods

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 24168-2017: Sredstva vosproizvodstva. Sperma zherebtsov zamorozhennaya. Tehnicheskie usloviya

GOST 24278-2016: Stationary steam turbines for electric generators of thermal electric stations. General technical requirements

GOST 24814-81: Radial roof ventilators

GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading

GOST 25696-83: Gas infrared radiant torches

GOST 25932-83: Portable radioisotope soil and concrete moisture and density gauges. General specifications

GOST 2593-82: Coupling air brake hoses for railway rolling stock. Specifications

GOST 26030-2015: Product for reproduction. Frozen semen of bulls. Specifications

GOST 26050-89: Industrial robots

GOST 26182-84: Non-destructive testing. Fluorescent method of leak testing

GOST 26449.0-85: Stationary distillation desalting units. General requirements for chemical analysis methods at saline water desalination

GOST 26500-85: Alkaline nickel-iron

GOST 26573.0-2017: Premixes Technical conditions

GOST 26574-2017: Wheat flour baking. Technical conditions

GOST 26598-2018: Containers and means of packaging in building. General specifications

GOST 26598-85: Containers and means of packaging in building industry

GOST 26698.1-93: Rigs for blast-holes drilling in open-cast mining works

GOST 26698.2-93: Underground drill rigs

GOST 26699-98: Underground drilling rigs. General specifications and test methods

GOST 26881-86: Stationary leaden batteries

GOST 26917-2000: Underground loading machines. General technical requirements and test methods

GOST 26957-97: Variators with wide-angle belt pulleys. General specifications

GOST 26980-95: Single bucket excavators. General specifications

GOST 26996-86: Polypropylene and copolymers of propylene. Specifications

GOST 27036-86: Bellows metal expansion joints and seals

GOST 27038-86: Powered face systems

GOST 27039-86: Mobile flight face conveyors. General safety requirements

GOST 27120-86: General purpose rotating-drum furnaces for chemical plants

GOST 27174-86: Open-type alkaline nickel-cadmium rechargeable cells and storage batteries of capacity up to 150 a/h

GOST 27267-2017: Product for reproduction. Non-diluted fresh sperm of cocks and turkeys-cock. Specifications

GOST 27412-93: Jaw crushers

GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications

GOST 27590-2005: House-tube water-watered heat supply systems. General specifications

GOST 27632-88: Accelerators of charged particles of industrial application

GOST 27636-95: Stone extraction and processing equipment

GOST 27694-88: Integrated circuits. Low-, intermediate- and high-frequency amplifiers. Methods for measuring electric parameters

GOST 27819-88: Fresh apples. Cold storage

GOST 27824-2000: Industrial burners for liquid fuel. General technical requirements

GOST 28066-89: Ssi liquid chamber meters

GOST 28110-89: Equipment for the cheese grain production

GOST 28112-89: Machines for extraction of bottles from the boxes and packing of bottles into the boxes

GOST 28121-89: Akins classifiers

GOST 28193-89: Natural-circulation stationary steam boilers with steam capacity of less than 4 ton / hour

GOST 28300-2010: Cardan shafts of traction drive of diesel locomotives and diesel trains. General specifications

GOST 28372-93: Fresh food potatoes. Guide to storage

GOST 28424-2014: Product for reproduction. Bovine embryos. Specifications

GOST 28426-90: Thermo diffusion strengthening and protection of metal products. General requirements for technological process

GOST 28460-2014: Combined feeding staffs for wildfowl. General specifications

GOST 28517-90: Non-destructive testing. Mass-spectrometer method of leak testing. General requirements

GOST 28532-90: Meat mincers

GOST 28708-2001: Means of small mechanization of agricultural works. Safety requirements

GOST 28708-2013: Means of small mechanization of agricultural works. Safety requirements

GOST 28717-90: Agricultural and forest machines. Cylinder driers. Methods of testing

GOST 28775-90: Gas pumping units driven with gas turbine. General specifications

GOST 28831-90: Rolled plates. Ultrasonic test methods.

GOST 28839-2017: Agricultural animals. Pigs Zootechnical content requirements for fattening

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 28845-90: Machines for long time strength creep, testing and relaxation of materials. General technical requirements

GOST 28932-91: Drafting machines

GOST 28933-91: Drawing devices

GOST 28948-91: Laboratory tables for operation with radioactive substance. Specifications

GOST 28969-91: Stationary steam low-capacity turbines

GOST 28988-91: Positive-displacement hydraulic drives, pneumatic drives and lubricating systems

GOST 29285-92: Reducers and motor-reducers. General requirements to the methods of experiments

GOST 29328-92: Stationary gas turbines for turbo generators. General technical requirements

GOST 29329-92: Balance for static weightings

GOST 2990-78: Cables, wires and cords

GOST 30124-94: Weight meters and weighing batchers of continuous action

GOST 30137-95: Horizontal jigging conveyers. General specifications

GOST 30222-95: Cone variable speed drives. General specifications

GOST 30223-95: Motorised conveyor drums. General specifications

GOST 30243.1-97: Open hopper wagons of 1520 mm gauge for the loose materials. General specifications

GOST 30243.2-97: Covered hopper wagons of 1520 mm gauge for the transport of cement. General specifications

GOST 30243.3-99: Covered hopper wagons for loose materials of 1520 mm gauge. General specifications

GOST 30275-96: Manipulators for contact spot welding. General specifications

GOST 30379-95: Electromagnetic compatibility of technical means of protection fire-alarm and fire-protection systems. Requirements, standards and methods of tests on interference immunity and industrial interference

GOST 30414-96: Weighbridges for weighing of vehicles in motion. General technical requirements

GOST 30534-97: Means of measurement for linear and angular dimensions. Safety requirements and test methods

GOST 30538-97: Food-stuffs. Analysis of toxic elements by atomic-emission method

GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods

GOST 30549-98: Dump cars for 1520 mm railway gauge. Requirements safety

GOST 30561-2017: Beet molasses. Technical conditions

GOST 30573-98: Foundry equipment. Installations for casting of aluminum alloys. General specifications

GOST 30703-2001: Non-destructive testing. Safety measures for leakage testing. General requirements

GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications

GOST 30823-2002: Fodders, compound feeds and feed additives. Determination of the elementary composition by means of atomic emission method.

GOST 30831-2002: Gaseous discharge pulsed and continuous sources of high-intensity optical radiation. Methods of electrical and radiation parameters measuring

GOST 30872-2002: Air cooling machines. General specifications

GOST 31244-2004: Non-destructive testing. Evaluation of material physical and mechanical properties for technical system elements by acoustic method. General requirements

GOST 31281-2004: Locking-sealing devices for transport and general and special purposes containers. General technical requirements

GOST 31283-2004: Indicators seals. General technical requirements

GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.

GOST 31315-2006: Electronic sealing devices. General technical requirements

GOST 31315-2015: Electronic sealing devices. General specifications

GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications

GOST 31343-2007: Machines and equipment for processing and decontamination of a fluid manure. Test methods

GOST 31344-2007: Machines and equipment for removing the manure. Test methods

GOST 31346-2007: Instаllation for processing of dung. Test methods

GOST 31402-2009: Brake cylinders for railway rolling stock. General specifications

GOST 31462-2011: Safety windows. General specifications

GOST 31489-2012: Garage equipment. Safety requirements and methods of inspection

GOST 31528-2012: Machines and equipment for munufacturing of sugar. Safety requirements

GOST 31529-2012: Machinery and equipment for bread baking industry. Safety requirements

GOST 31536-2012: Wheelsets for the traction railway stock. Method of measuring electrical resistance

GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST 31541-2012: Hammers. Safety requirements

GOST 31542-2012: Automatic and semi-automatic metal forming machines. Safety requirements

GOST 31557-2012: Shearers. General technical requirements. Test methods

GOST 31558-2012: Mine belt conveyers. General specifications

GOST 31561-2012: Longwall powered roof chocks. Basic parameters. General technical requirements. Test methods

GOST 31562-2012: Рneumatic rock drills. General technical requirements

GOST 31563-2012: Pneumatic hammer drills. Technical requirements and testing methods

GOST 31564-2012: Pneumatic stopper drills. General technical requirements

GOST 31591-2012: Gearmotors of general purposes. General specifications

GOST 31592-2012: Machine reducers. General specifications

GOST 31733-2012: Hydraulic presses. Safety requirements

GOST 31809-2012: Hurient stillage. Specifications

GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements

GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General

GOST 31824-2012: Fibrous mist eliminators. Types and main parameters. Safety requirements. Methods of testing

GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

GOST 31827-2012: Liquid centrifugal separators. Safety requirements. Test methods

GOST 31828-2012: Drying and evaporating apparatus and plants. Safety requirements. Test methods

GOST 31829-2012: Ozonization equipment. Safety requirements

GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing

GOST 31831-2012: Centrifugal dust collectors. Safety requirement and methods of testing

GOST 31833-2012: Biotechnical industries equipment. Vegetable materials hydrolysis apparatus. Fermenters. Safety requirements. Test methods

GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods

GOST 31835-2012: Well sucker-rod pumps. General technical requirements

GOST 31836-2012: Industrial centrifuges. Safety requirements. Test methods

GOST 31837-2012: Abcorptive gas purifiers. Safety requirements and test methods

GOST 31839-2012: Pumps and pump units for pumping of liquids. General safety requirements

GOST 31840-2012: Submersible pumps and pump units. Safety requirements

GOST 31895-2012: White sugar. Specifications

GOST 31927-2012: Live vaccine against salmonellosis of animals. General specifications

GOST 31966-2012: Marine, lokomotive and industrial engines. General safety requirements

GOST 32085-2013: Chemical (synthetic) fibres. Safety requirements

GOST 32199-2013: Product for reproduction. Sperm of goats. Specifications

GOST 32200-2013: Product for reproduction. Sperm of rams. Specifications

GOST 32208-2013: Springs of spring suspension of railway rolling stock. Method of fatigue life tests

GOST 32210-2013: Emission of the exhaust gas pollutants by the main-line and shunting of the special-purpose railway rolling stock. Norms and determination methods

GOST 32216-2013: Special railway rolling stock. General technical requirements

GOST 32265-2013: Special railway rolling stok. Dynamic and strength testing procedures

GOST 32274-2013: Monostructural fibreboards. Specifications

GOST 32279-2013: Iron ores, concentrates, agglomerates and pellets. Method for determination of hygroscopic water content

GOST 32320-2013: Anti-theft protection technical means and systems. General requirements and test methods

GOST 32399-2013: Waterproof Wood Chipboards. Technical Specifications

GOST 32406-2013: Diamond and cubic boron nitride tools. Safety requirements

GOST 32504-2013: Petroleum and natural gas industries. Downhole equipment. Sand screens liquid centrifugal separators. General technical requirements

GOST 32517.1-2013: Iron ores, concentrates, agglomerates and pellets. Methods for the determination of total iron

GOST 32518.1-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica gravimetric method

GOST 32518.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method

GOST 32520-2013: Iron ores, concentrates, agglomerates and pellets. General requirements to the methods of chemical analyses

GOST 32521-2013: Pоlymеric sасks. General specifications

GOST 32522-2013: Polypropylene woven sacks. General specifications

GOST 32567-2013: Wood boards with oriented particles. Specifications

GOST 32599.1-2013: Iron ores, concentrates, agglomerates and pellets. Determination of sulfur content. Barium sulfate gravimetric method

GOST 32599.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of sulfur content. Combustion/titration c method

GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements

GOST 32661-2014: Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications

GOST 32662-2014: Polymer composite components of the ventilating equipment. Specifications

GOST 32663-2014: Polymer composite components of the pumps for special purpose. Specifications

GOST 32687-2014: Fiberboards of a dry method of production, laminated with paper impregnated with thermosetting resins. Specifications

GOST 32699-2014: Moulded side frame and bolster beam of two-axle three-piece bogies for freight wagons of 1520 mm gauge railways. Methods of non-destructive testing

GOST 32732-2014: Medicine remedies for veterinary use. Vaccines against emfizematoze carbuncle of cattle and sheep. Specifications

GOST 32808-2014: Medicine remedies for veterinary use. Vaccines against brucellose of animals. Specifications

GOST 32893-2014: Perfumery and cosmetics. Methods of evaluation of toxicological and clinical safety indices

GOST 32897-2014: Mixed feeds for fur-bearing animals, rabbits and nutrias. General specifications

GOST 33021-2014: Perfumes and cosmetic products. Determination of the mass fraction of arsenic by atomic absorption with hydride generation

GOST 33022-2014: Cosmetics. Determination of the mercury mass fraction by the method of flameless atomic absorption

GOST 33023-2014: Cosmetics. Determination of the mass fraction of lead by atomic absorption with electro thermal atomization

GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications

GOST 33123-2014: Pipe culverts made of polymer composites. Specifications

GOST 33162-2014: Peat of low degree of decomposition. Specifications.

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33164.3-2014: Mining and tunneling equipment. Timbering, mechanized. Hydraulic control systems. Safety requirements and methods of testing

GOST 33172-2014: Electric chain hoists. Safety requirements.

GOST 33188-2014: Clutches of traction drive of multiple wagon rolling stock. Rubber-cord casing. General specifications

GOST 33222-2015: White sugar. Specifications

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST 33262-2015: Medicine remedies for veterinary use. Vaccine against cattle trichophytosis «LTF-130». Specifications

GOST 33275-2015: Biological medicine remedies for veterinary use. Vaccines fowl pox. Specifications

GOST 33280-2015: Medicine remedies for veterinary use. Vaccine against leptospirosis of animals. Specifications

GOST 33330-2015: Railway rolling stock driver's (operator's) armchair. Specifications

GOST 33344-2015: Constructive pultruded profiles from polymer composites. General specifications

GOST 33345-2015: Polymer composites. Production of plates for preparation of test specimens. General technical requirements

GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications

GOST 33369-2015: Fibre-reinforced thermosets for the strengthening and restoration of building structures. General specifications

GOST 33376-2015: Polymer composite deck sections for pedestrian and highway bridges and overbridges. General specifications

GOST 33380-2015: Organic fertilizers. Effluent. Specifications

GOST 33406-2015: Alcoholic, nonalcoholic and juice products, flavoring additives. Determination of the content of synthetic dyes by high-performance liquid chromatography

GOST 33407-2015: Cognacs, brandy distillates, brandy. Determination of the content of phenolic and furan compounds by high-performance liquid chromatography

GOST 33408-2015: Cognacs, brandy distillates, brandy. Determination of aldehydes, ethers and alcohols by gas chromatography

GOST 33409-2015: Alcoholic and juice products. Determination of carbohydrate and glycerin content by high-performance liquid chromatography

GOST 33410-2015: Non-alcoholic, low-alcohol, wine and juice products. Determination of the content of organic acids by high-performance liquid chromatography

GOST 33459-2015: Medicine remedies for veterinary use. Vaccines against dermatophytosis of animals. General specification

GOST 33683-2015: Polymer composite constructions of covered hopper wagons of 1520 mm gauge for bulk materials. Specifications

GOST 33684-2015: Polymer composite roofs for covered freight cars of 1520 mm gaugemain line railways. Specifications

GOST 33691-2015: Test of agricultural machinery. Method for determining the angle of transverse static stability

GOST 33735-2016: Agricultural machinery. Grain-cleaning machines. Test methods

GOST 33738-2016: Agricultural and forestry machinery with electric drive. General safety requirements

GOST 33749-2016: Hydraulic clampers for railway rolling stock. General specifications

GOST 33754-2016: Emissions of harmful substances and smoke of exhaust gases of autonomous traction and motor rolling stock. Norms and determination methods

GOST 33783-2016: Wheeled pairs of railway rolling stock. Methods for determination of strength indicators

GOST 33798.4-2016: Electric equipment of a railway rolling stock. Part 4. A.c. circuit-breakers. General specifications

GOST 33821-2016: Biological medicine remedies for veterinary use. Vaccine against avian influenza inactivated emulsified. Specification

GOST 33826-2016: Product for reproduction. Sperm of boars frozen. Specification

GOST 33827-2016: Products for reproduction. Fresh-received diluted boar’s semen. Specifications

GOST 33830-2016: Organic fertilizers on basis of waste of stock-raising. Specifications

GOST 33874-2016: Gas supply system. Gas production from offshore fields. Conditions of stay and use of buildings and structures safe for human health. Light environment. Technical requirements

GOST 33938-2016: Definition of acceptable level (degree) of risk and hazard industry-wide manufacturing equipment

GOST 33955-2016: Product for reproduction. Semen of bulls, divided by gender and frozen. Specification

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST 34013-2016: Seat passenger railcar rolling stock and passenger cars with locomotive traction. General specifications

GOST 34016-2016: Cranes. Load-lifting attachment. Safety requirements

GOST 34023-2016: Triticale. Specification

GOST 34032-2016: Board and combined cans. General specifications

GOST 34069-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Control and testing

GOST 34070-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Technical requirements

GOST 34077-2017: Hydrodynamic transmission for the railway rolling stock. Specifications

GOST 34102-2017: Organic fertilizers based on organogenic plant growing waste and enterprises processing crop production. Technical conditions

GOST 34109-2017: Complete mixed feeds for pigs. General specifications

GOST 34142-2017: Flour triticale. Specifications

GOST 34143-2017: Krupa tritikalevaya. Tehnicheskie usloviya

GOST 34152-2017: Feed concentrates for horses. General technical conditions

GOST 34183-2017: Оil and oil products trunk pipeline transportation. Oil centrifugal pumps. General specifications

GOST 34196-2017: Electrolyzers for the production of aluminum. General technical conditions

GOST 34199-2017: Plant protection. Requirements for the production of biological agents and other beneficial organisms

GOST 34389-2018: Agricultural machinery. Machines for the primary processing of flax trusts. Test methods

GOST 34443-2018: Mobile lifts with working platforms. Construction calculations, safety requirements, test methods

GOST 3934-2018: Aircraft wood. Inspection rules and control methods

GOST 4.105-2014: Peat and peat products. Nomenclature of quality indices of products

GOST 4.350-93: Product quality index system. Machines and equipment used in glass industry. Nomenclature of indices

GOST 4598-2018: Fibre boards by wet way of production. Specifications

GOST 4835-2006: Car wheelsets of 1520 mm gauge mainline railways. Specifications

GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications

GOST 5006-83: Toothed clutches. Specifications

GOST 572-2016: Polished millet groats. Specification

GOST 5973-91: Dump cars for 1520 mm railway gauge. General specifications

GOST 5981-2011: Cans and metallic preserve caps. Technical specifications.

GOST 6134-2007: Rotodynamic pumps. Test methods

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6625-85: Mine local ventilating fans

GOST 6937-91: Conic crushers

GOST 7045-2017: Flour rye bakery. Technical conditions

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 7090-72: Single-rotor hammer crushers

GOST 7169-2017: Wheat bran. Technical conditions

GOST 7170-2017: Bran rye. Technical conditions

GOST 7524-2015: Steel grinding balls for ball mills. Specifications.

GOST 7890-93: Travelling single girder suspended cranes. Specifications

GOST 8.005-2002: State system for ensuring the uniformity of measurements. Continuous conveyer balance. Methods and means of verification

GOST 8.216-2011: State system for ensuring the uniformity of measurement. Potential transformers Checking methods.

GOST 8.216-88: State system for ensuring the uniformity of measurements. Voltage transformers. Verification methods

GOST 8.469-2002: State system for ensuring the uniformity of measurements. Automatic continuous proportional weighers. Methods and means of verification

GOST 8.523-2004: State system for ensuring the uniformity of measurements. Gravimetric filling instruments. Verification procedure

GOST 8.523-2014: State system for ensuring the uniformity of measurements. Gravimetric filling instruments. Verification procedure

GOST 8339-84: Oil pressure installations for hydraulic turbines

GOST 9.056-75: Unified system of corrosion and ageing protection. Steel ship hulls. Electrochemical protection at long-term anchorage. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.913-90: Unified system of corrosion and ageing protection. Aluminium, magnesium and alloys. Methods of accelerated corrosion test

GOST 9018-89: Fuel dispensing pumps. General specifications

GOST 9231-80: Twin-shaft blenders of paddle type

GOST 9268-2015: Mixed feeds-concentrates for fodder cattle. Specifications

GOST 9286-2012: Technical pentaerythritol. Specifications

GOST 9353-2016: Wheat. Specifications

GOST 9923-80: Manual fire barrel. Specifications

GOST OIML R 111-1-2009: State system for ensuring the uniformity of measurement. Weights of accuracy classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3. Part 1 Metrological and technical requirements.

GOST R 12.2.011-2003: Occupational safety standards system. Building, road, and earth-moving machinery. General safety requirements

GOST R 12.2.133-97: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods

GOST R 12.2.141-99: Occupational safety standards system. Surface drilling equipment. Safety requirements

GOST R 12.2.142-99: Occupational safety standards system. Refrigerating equipment of refrigerating capacity over 3,0 kW. Safety requirements

GOST R 18.12.01-2015: Technology of the aviation fuelling. Functional and technological parameters of airfield fuelling tankers (tankers). Customer requirements

GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements

GOST R 22.1.13-2013: Safety in emergencies. Measures for civil defence, measures for prevention of natural and man-caused emergencies. Structured system for monitoring and control of building construction engineering equipment. Rules for construction and operation

GOST R 22.9.21-2014: Technical means of chemical detection. Classification. General technical requirements

GOST R 50009-92: Electromagnetic compatibility of technical means of protection fire-alarm and fire-protection systems. Requirements, standards and methods of tests on interference immunity and industrial interference

GOST R 50059-92: Travelling single-girder suspended cranes. Specifications

GOST R 50139-92: Processing equipment. General specifications

GOST R 50553-93: Industrial purity. Filters and their elements. Specification

GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating

GOST R 50601-93: Impeller counters for potable water. General specifications

GOST R 50612-93: Machines and equipment for manufacturing of sugar. Safety requirements

GOST R 50620-93: Machinery and equipment for bread baking industry. Safety requirements

GOST R 50680-94: Automatic water fire fighting systems. General technical requirements. Test methods.

GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods

GOST R 50703-94: Heading machines having cutter heads mounted on booms. Test methods

GOST R 50761-95: Marine, locomotive and industrial diesels. General safety requirements

GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General

GOST R 50800-95: Automatic fire fighting foam systems General technical requirements Test methods

GOST R 50818-95: Gas motors volumetric. General technical requirements and test methods

GOST R 50821-95: Fibrous mist eliminators. Their types and main parameters. Safety requirements. Methods of testing

GOST R 50860-2009: Aircrafts and helicopters. Antenna feeder devices of connection, navigation, landing and air traffic control. General technical requirements, parameters, methods of measurements

GOST R 50860-96: Aircraft and helicopters. Antenna feeder devices of connection, navigation, landing and air traffic control. General specification, parameters, methods of measurements

GOST R 50862-2005: Safes and strong rooms. Requirements and methods of tests for resistance to burglary and fire

GOST R 50862-2012: Safes, safe rooms and strong rooms. Requirements and methods of tests for resistance to burglary and fire

GOST R 50862-96: Safes and strong rooms. Requirements and methods of test for resistance to burglary and fire

GOST R 50891-96: Machine reducers. General specifications

GOST R 50892-96: Elastic couplings with a toroid-shape shell. Specifications

GOST R 50895-96: Toothed clutches. Specifications

GOST R 50902-2011: Fuel peat for pulverized burning. Specifications

GOST R 50905-96: Motor vehicles. Electronic equipment. General technical requirements

GOST R 50911-96: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST R 50943-96: Snowbogmobiles. Safety requirements

GOST R 50953-2008: Emission of the exhaust gas pollutants by the main-line and shunting diesel locomotives. Norms and determination methods

GOST R 50953-96: Emission of the exhaust gas pollutants by the main line and shunting diesel locomotives. Norms and determination methods

GOST R 50968-96: Gearmotors of general purpose. General standard specifications

GOST R 50969-96: Automatic gas fire extinguishing systems. General technical requirements. Test methods

GOST R 50981-96: Hand-holding household pumps. General safety requirements

GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51036-97: Electrooptical elements. Methods for measurement of electrooptical parameters

GOST R 51043-2002: Аutomatic water and foam fire fighting systems. Sprinklers, spray nozzles and water mist nozzles. General technical requirements. Test methods

GOST R 51043-97: Automatic water and foam fire extinguishing systems. Sprinkler and drencher heads. General technical requirements. Test methods

GOST R 51052-2002: Аutomatic water and foam fire extinguishing installations. Wet and dry systems alarm stations. General technical requirements. Test methods

GOST R 51052-97: Automatic water and foam fire extinguishing installation. Shut-down valves. General technical requirements. Test methods

GOST R 51053-97: Safes locks. Requirements and test methods for resistance to criminal opening without lock breakage and to burglary

GOST R 51057-97: Fire engineering. Portable fire extinguishers. General technical requirements. Test methods

GOST R 51062-2011: Sod fuel peat for heating purposes. Specifications

GOST R 51072-2005: Protection doors. General technical requirements and test methods for resistance to burglary, bullet and fire

GOST R 51072-97: Protection doors. General technical requirements and methods of tests for resistance to burglary and bullet

GOST R 51110-97: Equipment for bank protection. General technical requirements

GOST R 51111-97: Equipment for bank protection. Acceptance rules and test methods

GOST R 51114-97: Automatic water and foam fire fighting systems. Feeder. General technical requirements. Test methods

GOST R 51133-98: Forwarding services on railway transport. General requirements

GOST R 51151-98: Garage equipment. Safety requirements and methods of inspection

GOST R 51161-98: Glass reinforced plastic sucker rods. Specifications

GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection

GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications

GOST R 51241-2008: Access control units and systems. Classification. General technical requirements. Test methods

GOST R 51241-98: Access control systems and units. Classification. General requirements. Methods of tests

GOST R 51242-98: Mechanical protective constructions and electromechanical protective constructions for doorways and windows ventings. Technical requirements and test methods for breaking resistance

GOST R 51246-99: Pneumatic hammer drills. Technical requirements and testing methods

GOST R 51249-99: Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods

GOST R 51250-99: Internal combustion reciprocating engines. Visible pollutants. Limit values and test methods

GOST R 51289-99: Returnable polymeric boxes. General specifications

GOST R 51304-99: Services of retailing. General requirements

GOST R 51360-99: Refrigerating compressors. Safety requirements and methods of testing

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51558-2000: Television systems of security. General technical requirements and test methods

GOST R 51558-2008: Security television means and systems. Classification. General technical requirements. Test methods

GOST R 51558-2014: Systems and components of Video surveillance for security applications. Classification. General requirements. Test procedures

GOST R 51562-2000: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

GOST R 51563-2000: Liquid centrifugal separators. Safety requirements. Test methods

GOST R 51564-2000: Drying and evaporating apparatus and plants. Safety requirements. Test methods

GOST R 51571-2000: Metal bellows expansion joints and seals. General technical requirements

GOST R 51626-2000: Chemical (synthetic) fibres. Safety requirements

GOST R 51660-2000: Services. Boots repair services. General specifications

GOST R 51681-2000: Pneumatic hammer drills. Drill steels. General technical requirements

GOST R 51706-2001: Ozonisation equipment. Safety requirements

GOST R 51707-2001: Electrostatic precipitators. Safety requirement and methods of testing

GOST R 51708-2001: Centrifugal dust collectors. Safety requirement and methods of testing

GOST R 51720-2001: Polymeric sacks. General specifications

GOST R 51759-2001: Hydrodynamic transmission for the railway rolling stock. General specifications

GOST R 51773-2001: Retailing. Classification of enterprises

GOST R 51878-2002: Adsorptive gas cleaners. Safety requirements and test methods

GOST R 51896-2002: Well sucker-rod pumps. General technical requirements

GOST R 51913-2002: Locking-sealing devices for transport and general and special purposes containers. General technical requirements

GOST R 51918-2002: The equipment for care of coordinates through the vertical mine. General technical requirements and test methods

GOST R 51931-2002: Industrial centrifuges. Safety requirements. Test methods

GOST R 51984-2002: Mine belt conveyers. General specifications

GOST R 52018-2003: Shaft sinking hoppets. Specifications

GOST R 52026-2003: Forestry machinery. Petrol power chain-saws, bush-cutters and grass-trimmers. Methods of measuring the technical data of internal-combustion engines

GOST R 52077-2003: Indicators seals. General technical requirements

GOST R 52152-2003: Long wall powered roof chocks. Basic parameters. General technical requirements. Test methods

GOST R 52153-2003: Radiation-protective boxes. General specifications

GOST R 52203-2004: Tubing and coupling. Specifications

GOST R 52217-2004: Sinking rope attachments. Specifications

GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods

GOST R 52259-2004: Electronic sealing devices. General technical requirements

GOST R 52298-2004: Transport and forwarding services. General requirements

GOST R 52316-2005: Fire equipment. Thermal equipment trips. General technical requirements. Test methods

GOST R 52348-2005: Shooting-galleries. Armoured protection and technical resistance to burglary. Acceptance rules and methods of testing

GOST R 52365-2005: Seals. Requirements for test methods of locking system reliability and resistance to unauthorized access

GOST R 52370-2005: Natural diamond powders. Specifications

GOST R 52392-2005: Brake cylinders for railway rolling stock. General specifications

GOST R 52401-2005: Wood-cutting tools for hand operated machine-tools. Safety requirements

GOST R 52435-2005: Technical means of intruder alarm systems. Classification. General technical requirements and test methods

GOST R 52435-2015: Alarm intruder technical means. Classification. General technical requirements and test methods

GOST R 52436-2005: Control equipment of intruder and intruder-fire alarm systems. Classification. General technical requirements and test methods

GOST R 52442-2005: Pneumatic stopper drills. General technical requirements

GOST R 52443-2005: Pneumatic rock drills. General technical requirements

GOST R 52445-2005: Absorptive gas purifiers. Safety requirements and test methods

GOST R 52543-2006: Hydraulic drives. Safety requirements

GOST R 52564-2006: Polypropylene woven sacks. General specifications

GOST R 52582-2006: Looks for protective designs. Requirements and test methods for resistance to criminal open without lock breakage and to burglary

GOST R 52588-2006: Abrasive tools. Safety requirements

GOST R 52588-2011: Abrasive tools. Safety requirements

GOST R 52602-2006: Anticorrosive polymeric-asmol coating-tape "LIAM". Specifications

GOST R 52616-2006: Live vaccine against anthrax of animals from strain 55-VNIIVV & M. Specifications

GOST R 52620-2006: Transport polymeric containers. General specifications

GOST R 52727-2007: Technical diagnostics. Acoustic-emission diagnostics. General requirements

GOST R 52731-2007: Non-destructive testing. Stress evaluation by ultrasound. General requirements

GOST R 52743-2007: Pumps and pump units for pumping of liquids. General safety requirements

GOST R 52744-2007: Submersible pumps and pump units. Safety requirements

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 52768-2007: Centrifuges for industries working with radioactive media. General technical requirements and test methods

GOST R 52869-2007: Pneumatic drives. Safety requirements

GOST R 52889-2007: Non-destructive testing. Ultrasound measurement of screw tightening forces. General requirements

GOST R 52890-2007: Non-destructive testing. Evaluation of stresses in material of pipelines by ultrasound. General requirements

GOST R 52891-2007: Control of residual technological stresses by laser interferometrical method. General requirements

GOST R 52903-2007: Packs made of polymeric films and composite materials. General specifications

GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements

GOST R 52915-2008: Automatic and semi-automatic metalforming machines. Safety requirements

GOST R 52920-2008: Wheelsets for the traction railway stock. Method of measuring the electrical resistance

GOST R 52929-2008: Railway traction stock. Methods of controlling braking distance and parking brake

GOST R 53010-2008: Hydraulic presses. Safety requirements

GOST R 53037-2008: Mobile elevating work platforms. Design calculations, safety requirements, tests

GOST R 53037-2013: Mobile elevating work platforms. Design, calculations, safety requirements, tests

GOST R 53055-2008: Agricultural and forestry machinery with the electric drive. General safety requirements

GOST R 53098-2008: Nutrient stillage. Specifications

GOST R 53116-2008: Organic fertilizers on basis of waste of crop production and plant processing enterprises. Specifications

GOST R 53117-2008: Organic fertilizers on basis of waste of stock-raising. Specifications

GOST R 53177-2008: Vacuum technology. Measurement of performance characteristics of mass-spectrometer method of tightness control

GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53198-2008: Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis

GOST R 53204-2008: Non-destructive testing. Alternating stress evaluation by ultrasound. General requirements

GOST R 53205-2008: Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

GOST R 53237-2008: Fiber glass. General requirements for safety in the course of Production and Application

GOST R 53277-2009: Fire equipment. Equipment for maintenance of fire hoses. General technical requirements. Methods of testing

GOST R 53281-2009: Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods

GOST R 53282-2009: Automatic gas fire extinguishing systems. Isothermal tanks. General technical requirements. Test methods

GOST R 53283-2009: Automatic gas fire extinguishing systems. Distributing valves. General technical requirements. Test methods

GOST R 53285-2009: Fire engineering. Portable generators of extinguishing aerosol. General technical requirements. Test methods

GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods

GOST R 53287-2009: Water and foam fire fighting systems. Fire alarm hydraulic, fire foam inducer, feeder. General technical requirements. Test methods

GOST R 53290-2009: Fire engineering. Foam fire-extinguishing installations. Low expansion foam generators for subsurface extinguishing in tanks. General technical requirements. Test methods

GOST R 53299-2009: The test method for the fire resistance. Ventilation ducts

GOST R 53299-2013: Ventilation ducts. The test method for the fire resistance

GOST R 53301-2009: Fire dampers of ventilation systems. The test method for the fire resistance

GOST R 53301-2013: Fire dampers of ventilation systems. The test method for the fire resistance

GOST R 53302-2009: The equipment of smoke control systems. The test method for the fire resistance

GOST R 53303-2009: Building constructions. Fire doors and gates. Test methods for smoke-and-gas leakage

GOST R 53304-2009: Trunks of refuse chutes. The test method on fire resistance

GOST R 53305-2009: Smoke shields. The test method for the fire resistance

GOST R 53306-2009: Enclosing building structures crossing junction points by using pipe, which is made of polymeric materials. Fire resistance test

GOST R 53325-2009: Fire techniques. Means of fire automatics. The general technical requirements. Test methods

GOST R 53380-2009: Soils and Grounds. Hothouse grounds. Specifications

GOST R 53381-2009: Soils and Grounds. Feeding Grounds. Specifications

GOST R 53385-2009: Safety attractions. Shooting attractions. General requirements

GOST R 53396-2009: White sugar. Specifications

GOST R 53401-2009: Gas fuel locomotives. Requirements of explosion safety

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R 53403-2009: Iron ores, concentrates, agglomerates and pellets. Method for the determination of titanium content

GOST R 53432-2009: Printed circuit boards. General technical requirements for manufacture

GOST R 53463-2009: Hammers. Safety requirements

GOST R 53481-2009: Lubrication systems. Safety requirements

GOST R 53489-2009: Occupational safety standards system. Mounted and trailed agricultural machines. General safety requirements

GOST R 53491.1-2009: Pools. Treatment of water. Part 1. General requirements

GOST R 53491.2-2012: Pools. Treatment of water. Part 2. Safety requirements

GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements

GOST R 53560-2009: Intruder alarm systems. Power supply units. Classification. General technical requirements. Test methods

GOST R 53648-2009: Underground diesel locomotives. General technical requirements and test methods

GOST R 53649-2009: Shearers. General technical requirements. Test methods

GOST R 53657-2009: Iron ores, concentrates, agglomerates and pellets. Method for determination of divalent iron calculated as ferrous oxide

GOST R 53658-2009: Iron ores, concentrates, agglomerates and pellets. Atomic absorption method for determination of copper content

GOST R 53659-2009: Iron ores, concentrates, agglomerates and pellets. Atomic absorption method for determination of total manganese calculated as protoxide

GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements

GOST R 53704-2009: Complex and integrated security systems. General technical requirements

GOST R 53705-2009: Complex security systems. Stationary metal detectors for apartments. General technical requirements. Test methods

GOST R 53787-2010: Sealing devices. Test methods of rod type power sealing devices resistance to unauthorized access. General requirements

GOST R 53888-2010: Sealing devices. Test methods of indicative seals resistance to unauthorized access. General requirements

GOST R 53978-2010: Special railway rolling stock. General technical requirements

GOST R 54000-2010: Organic fertilizers. Sapropels. General specifications

GOST R 54064-2010: Live vaccine against salmonellosis of animals. General specifications

GOST R 54086-2010: Pressure regulators. General specifications

GOST R 54093-2010: Wheel for railway stock. Methods of residual stress determination

GOST R 54109-2010: Secure technologies. Security printing products. General technical requirements

GOST R 54126-2010: Warning devices for intruder alarm systems. Classification. General technical requirements and test methods

GOST R 54129-2010: Emission of the exhaust gas pollutants by the main-line and shunting for the special-purpose rolling stock. Norms and determination methods

GOST R 54248-2010: Peat briquettes and pellets for heating purposes. Specifications

GOST R 54249-2010: Peat humate liquid fertilizers. Specifications

GOST R 54302-2011: Sealing devices. Test methods of security seals resistance to environmental climatic and mechanical factors occurring in operation

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54319-2011: Feeding flour. Specifications

GOST R 54326-2011: Springs of spring suspension of the railway rolling stock. Method of fatigue life test

GOST R 54332-2011: Peat. Methods of sampling

GOST R 54403-2011: Stationary gas turbines for drive of turbogenerators. General specifications

GOST R 54404-2011: Gas pumping units driven with gas turbine. General specifications

GOST R 54418.1-2012: Renewable power engineering. Wind power engineering. Wind turbines. Part 1. Technical requirements

GOST R 54431-2011: Metal-working machines. General safety requirements

GOST R 54455-2011: Alarm systems. Environmental test methods

GOST R 54466-2011: Rotating electrical machines. Asynchronous explosion-proof motors of power from 0,25 to 400 kW inclusive. General technical requirements and test methods

GOST R 54487-2011: Non-destructive testing. Evaluation of gas porosity in aluminium casting alloys by ultrasound. General requirements

GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 54560-2015: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 54633-2011: Products for reproduction. Сryopreserved sexed sperm of bulls. Specifications

GOST R 54636-2011: Products for reproduction. Сryopreserved semen of boars. Specifications

GOST R 54638-2011: Products for reproduction. Fresh-received diluted boar’s semen. Specifications

GOST R 54651-2011: Organic fertilizers on basis of sewage sludge. Specifications

GOST R 54763-2011: Medicinal remedies for veterinary. Manufacture production regulations. The maintenance, order of working out, the coordination and confirmation

GOST R 54771-2011: Mine electric locomotive transport. Trolley electric locomotives. General technical requirements and test methods

GOST R 54772-2011: Supple mining main vents and shaped components for them. General technical requirements and test methods

GOST R 54774-2011: Underground monorail diesel powered transport. General technical requirements and test methods

GOST R 54775-2011: Powered support pumping stations. General technical requirements. Test methods

GOST R 54776-2011: Occupational safety standards system. Equipment and facilities for prevention and localization explosions of dust-air mixtures in coal mines dangerous on gas and dust. General technical requirements. Safety requirements and test methods

GOST R 54777-2011: Automatic systems for explosions localization and suppression of methane-dust-air mixture explosions in coal mines. General technical requirements. Test methods

GOST R 54780-2011: Machines for goods processing fruit. Test methods

GOST R 54783-2011: Testing of agricultural machinery. Basic principles

GOST R 54784-2011: Testing agricultural tractors and machines. Methods for estimation of technical parameters

GOST R 54787-2011: Nanodimensional processing of precision details. Production requirements

GOST R 54831-2011: Control access systems. Controlled barrier units. General technical requirements. Test methods

GOST R 54901-2012: Dried beet pulp. Specifications

GOST R 54902-2012: Raw cane sugar molasses. Specifications

GOST R 54906-2012: Complex security systems. Environmental security and ecological safety guaranteed design. General technical requirements

GOST R 54928-2012: Pedestrian bridges for polymer composites. Specifications

GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST R 54962-2012: Railway rolling stock driver’s (operator's) armchair. Specifications

GOST R 55005-2012: Renewable power engineering. Geothermal power plants. Safety requirements under operation

GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications

GOST R 55042-2012: Non-destructive testing. Evaluation of metallic coating thickness by ultrasound. General requirements

GOST R 55043-2012: Non-destructive testing. Evaluation of elastic-acoustic coefficients. General requirements

GOST R 55067-2012: Magnesium chloride. Specifications

GOST R 55068-2012: Glass-fibre and basalt-fibre reinforced epoxy plastic pipes and parts of pipelines. Specifications

GOST R 55072-2012: Fiberglass reinforced thermosetting plastic vessels. Specifications

GOST R 55073-2012: Resistance polymer composites for repairing industrial pipe-line. Specifications

GOST R 55074-2012: Chemical resistance polymer composites for lining industrial tanks and vessels. General specifications

GOST R 55075-2012: Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems. Specifications

GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications

GOST R 55141-2012: Associated gas processing. Small-sized block gas - processing complexes. General technical requirements

GOST R 55152-2012: Mining equipment. Mobile armoured face conveyors. General technical requirements and test methods

GOST R 55153-2012: The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods

GOST R 55154-2012: Equipment mountain-mine. Systems of safety of the coal mines multifunctional. General technical requirements

GOST R 55156-2012: Mining equipment. Mine belt stage loader. General technical requirements and test methods

GOST R 55157-2012: Mining equipment. Hydraulic jacks. General technical requirements and test methods

GOST R 55158-2012: Mining equipment. Haulage and shunting mining winches. General technical requirements and test methods

GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods

GOST R 55160-2012: Mining equipment. Mine face conveyers jacks. General technical requirements and test methods

GOST R 55161-2012: Mining equipment. Borers mining hand pneumatic. Safety requirements and methods of testing

GOST R 55162-2012: Mining equipment. Pneumatic hammers. Safety requirements and test methods

GOST R 55163-2012: Mining equipment. Underground self-propelled cars. Safety requirements and test methods

GOST R 55166-2012: Mining equipment. Rotary bucket quarry excavators. General technical requirements and test methods

GOST R 55168-2012: Stationary gas turbine plants' air intake ducts. General technical requirements

GOST R 55182-2012: Passenger cars on locomotive traction. General technical requirements

GOST R 55184-2012: Hydraulic clampers for railway rolling stock. General specifications

GOST R 55196-2012: Gas turbines of low capacity for turbogenerators. General technical requirements

GOST R 55259-2012: Plants for artificial drying of hay. Test methods

GOST R 55260.3.1-2013: Hydro power plants. Part 3-1. Hydraulic turbines. Procurement specification

GOST R 55262-2012: Dry machines and installing the agricultural purpose. Methods of testing

GOST R 55275-2012: Live vaccine against rabies of animals

GOST R 55283-2012: Inactivated vaccines against rabies of animals. Specifications

GOST R 55301-2012: Fodder yeast from the corn distillers. Specifications

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55439-2013: Inland water transport. Operation of cargo transfer complexes and passenger terminals of river ports. Safety requirements

GOST R 55453-2013: Feeding stuffs for non-productive animals. General specifications

GOST R 55454-2013: Washing zoohygienic liquid products for unproductive animals. General specifications

GOST R 55476-2013: Products zoocosmetics for unproductive animals. Creams and gels. General specifications

GOST R 55514-2013: Locomotives. Dynamic and strength testing procedures

GOST R 55521-2013: Automobile engines. Pumps lubrication systems. Technical requirements and test methods

GOST R 55560-2013: Inland water transport. Operation of cargo transfer complexes and passenger terminals of river ports. Safety requirements. General

GOST R 55570-2013: Organic fertilizers. Biocompost. Specifications

GOST R 55571-2013: Organic fertilizers on basis of solid domestic waste. Specifications

GOST R 55621-2013: Guide for procurement of power station equipment. Part 5-4. Turbines-hydraulic turbines, storage pumps and pump-turbines

GOST R 55622-2013: Complex security systems. Hydraulic gun carriage trunks with Remote control. General technical requirements

GOST R 55658-2013: Panels wall with the wooden framework. Specifications

GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods

GOST R 55727-2013: Mining equipment. Mine loading cars. General technical requirements and test methods

GOST R 55728-2013: Mining equipment. Underground hydromonitors. Safety requirements and test methods

GOST R 55729-2013: Mining equipment. Hydraulic props for roof of supports. General specifications

GOST R 55730-2013: Mining equipment. Loading-transport machines. General technical requirements

GOST R 55734-2013: Mining equipment. Quarry spreaders. General technical requirements and test methods

GOST R 55735-2013: Mining equipment. High pressure mine rubber hoses with metallic tapings and metallic braidings with fitting. Safety requirements and test methods

GOST R 55736-2013: Mining equipment. Machines for drilling blast holes in open mountain developments. General technical requirements and test methods

GOST R 55737-2013: Mining equipment. Mine electric locomotive transport. Accumulator electric locomotives. General technical requirements and test methods

GOST R 55765-2013: Biological medicine remedies for veterinary use. Vaccines against a virus haemorrhagic disease of rabbits tissue inactivated. Specifications

GOST R 55781-2013: Means of delivering cement. Technical conditions

GOST R 55805-2013: Non-destructive testing. Ultrasonic monitoring of texture in rolled steel sheets. General requirements

GOST R 55806-2013: Non-destructive testing. Ultrasound measurement of bonding strength of layers in bimetal. General requirements

GOST R 55807-2013: Non-destructive testing. Ultrasonic monitoring of internal straight pipe threads. General requirements

GOST R 55852-2013: Draft machine. General operating specification

GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification

GOST R 55882.4-2013: Electric equipment of a railway rolling stock. Part 4. A.c. circuit-breakers. General specifications

GOST R 55970-2014: Iodized food additives. General specifications

GOST R 55985-2014: Functional feeding stuffs for non-productive animals. General specifications

GOST R 55995-2014: Seat passenger railcar rolling stock and passenger cars with locomotive traction. General specifications

GOST R 56004-2014: Organic fertilizers. Vermicomposting. Specifications

GOST R 56019-2014: Gas distribution systems. Gas pressure regulating stations. Functional requirements

GOST R 56028-2014: Fire engineering. Automatic gas-powder fire extinguishing systems. General technical requirements. Test methods

GOST R 56077-2014: Methods of aerodynamic tests of the elements of engineering equipments smoke protection of buildings

GOST R 56093-2014: Information protection. Protected operational systems. Means of detection of purposeful powerful electromagnetic impacts. General requirements

GOST R 56115-2014: Information protection. Protected operational systems. Means of protection against purposeful powerful electromagnetic impacts. General requirements

GOST R 56141-2014: Mining equipment. Multipurpose safety systems for coal mines. System of implosion protection of the mountain making. General technical requirements

GOST R 56185-2014: Technical diagnostics. Evaluation of stresses in sides of pressure vessels by ultrasound. General requirements

GOST R 56186-2014: Technical diagnostics. Evaluation of a status of long used rails by acoustic method. General requirements

GOST R 56187-2014: Technical diagnostics. Ultrasonic monitoring of steel overheating sheets. General requirements

GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification

GOST R 56207-2014: Slabs and tiles of engineered stone on the basis of natural quartz. Specifications

GOST R 56209-2014: Rods composite polymer for the manufacture of cores uninsulated wires. Specifications

GOST R 56232-2014: Determination of B«stress-strainB» diagram in the course of ball instrumental indentation. General requirements

GOST R 56247-2014: Industrial laundries. General requirements

GOST R 56249-2014: Technical gas sulphur. Specifications

GOST R 56277-2014: Polymer composite pipes and fittings for intrafield pipelines. Specifications

GOST R 56309-2014: Oriented strand wood construction boards. Specifications

GOST R 56383-2015: Artificial dried grass fodder. Specifications

GOST R 56459-2015: Fire extinguishing devices with thermosetting micro capsulation outgassing extinguishing composition. General technical requirements. Test methods

GOST R 56460-2015: Building structures. Method of fire hazard testing for external coating

GOST R 56475-2015: Space systems. Non-destructive testing of the thickness of thick nickel platings of parts and assemblies of liquid-propellant engines. General requirements

GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes

GOST R 56663-2015: Non-destructive testing. Quality control of engineering products by residual magnetization formed during their manufacture. General requirements

GOST R 56664-2015: Non-destructive testing. Evaluation of stress state material engineering products by acoustoelastic methods. General requirements

GOST R 56665-2015: Non-destructive testing. Ultrasonic method for determining the residual stresses in the railway wheel rims. General requirements

GOST R 56666-2015: Technical diagnostics. Acoustic method of diagnostics and evaluation a residual resource of side frames trucks wagons. General requirements

GOST R 56667-2015: Technical diagnostics. Acoustic method for assessing conditions of high-speed wagons. General requirements

GOST R 56712-2015: Panel multilayer polycarbonate. Specifications

GOST R 56731-2015: Anchors for use in concrete. Test methods

GOST R 56913-2016: Fodder lysine. General specifications

GOST R 56976-2016: Liquid oral zoohygiene products for unproductive animals. General specificР В°tions

GOST R 57026-2016: Liquefied natural gas fueled locomotives. Methods of test for leaks pipes, fittings and joints gas treatment systems

GOST R 57052-2016: Mining equipment. Automatic fire fighting systems (for mining). General technical requirements and test methods

GOST R 57072-2016: Probiotics 'Subtilin' and 'Acidophil' (probiotic feed additive). Specifications

GOST R 57087-2016: Dry bacterial starter for making silage of food. Specification

GOST R 57117-2016: Sealing devices. Utilization techniques

GOST R 57144-2016: Special automatic traffic enforcement devices with photo, filming and recording features. General technical requirements

GOST R 57154-2016: Technical diagnostics. Monitoring of mechanical and heat npp equipment. General requirements

GOST R 57172-2016: Technical diagnostics. Determination of surface residual stresses by method of instrumental indentation. General requirements

GOST R 57173-2016: Calculation and strength testing. Methods of mechanical testing of metals. Test for stress relaxation of metals and alloys at a compression. General requirements

GOST R 57177-2016: The induction-metallurgical method of surfacing. Technological process

GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57181-2016: Thermite welding of rails. Technological process

GOST R 57196-2016: Feed antibiotic Batsilihin. Specifications

GOST R 57197-2016: Feeding preparation Vitamitsin. Specifications

GOST R 57198-2016: Fodder concentrate of lysine. Specifications

GOST R 57200-2016: Vitamin B2 feed. Specifications

GOST R 57201-2016: Vitamin B12 feed. Specifications

GOST R 57202-2016: Bitoxybacillin. Insecticide. Specifications

GOST R 57213-2016: Electromagnetic compatibility of technical equipment. Radar absorbing composite polymer self-adhesive coating. General specifications

GOST R 57244-2016: Fodder griseus. Specifications

GOST R 57245-2016: Preparation gomelin. Insecticide. Specifications

GOST R 57246-2016: Preparation dendrobacillin. Insecticide. Specifications

GOST R 57247-2016: Preparation lepidocide. Insecticide. Specifications

GOST R 57253-2016: Fodder yeast-Paprin. Specifications

GOST R 57277-2016: Cashpoints and payment terminals. Means of technicals defense. Requirements and methods of test for resistance to separation and burglary

GOST R 57283-2016: Calculation and strength testing. Acoustic method for determination of damage under thermocyclic fatigue of steel. General requirements

GOST R 57284-2016: Calculation and strength testing. Acoustic method for determination of damage under low-cycle fatigue of steel. General requirements

GOST R 57384-2017: Secure storage device. Fire resistance safes and cabinets. Classification and methods of fire resistance tests

GOST R 57393-2017: Microelectromechanical transducers of linear acceleration. Methods for measurement parameters

GOST R 57395-2017: Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters

GOST R 57407-2017: Carbon fibers. General technical requirements and test methods

GOST R 57410-2017: Unified system of corrosion and ageing protection. Corrosion protection of wares from non-ferrous metal alloys by diffusion treatment with zinc. General requirements for flow process

GOST R 57411-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of cast iron or steels by diffusion processing of zinc. General requirements to flow process

GOST R 57419-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of super high and high-strength steels by diffusion treatment with zinc. General requirements for flow process

GOST R 57548-2017: Vacuum induction melting for obtaining products with single-crystal structure. Technical requirements

GOST R 57549-2017: Vacuum induction melting for obtaining products with polycrystalline structure. Technical requirements

GOST R 57550-2017: Technological equipment for electron beam processing in vacuum

GOST R 57566-2017: Pulp for absorbing articles from paper sanitary purposes. Specifications

GOST R 57598-2017: Microbiological products. Autolysate Microbial Protein Concentrate Feed 60 % (MPCF 60) Specifications

GOST R 57599-2017: Microbiological products. Bacterial larvicidal preparations аgainst the larvae of mosquitoes. General requirements

GOST R 57600-2017: Microbiological products. Integrated grain sourdough. Specifications

GOST R 57601-2017: Microbiological products. The bacterial insecticide bactoculicid. Specifications

GOST R 57602-2017: Fibre reinforced thermosetting plastic pipes and pipelines. Nondestructive testing methods with exploiting

GOST R 57618.1-2017: Small craft infrastructure. General provisions

GOST R 57618.4-2017: Small craft infrastructure. Repair bases and services. General requirements

GOST R 57644-2017: Microbiological products. Miko insecticides vertitsellin. Specifications

GOST R 57645-2017: Microbiological products. Insecticide plant pathogenic fungus medication. Specifications

GOST R 57646-2017: Microbiological products. Food additives Nisin. Specifications

GOST R 57648-2017: Microbiological products. Bacterial larvicidal drug against fly larvae. Specifications

GOST R 57649-2017: Microbiological products. Bacterial neftedestruktor. Specifications

GOST R 57650-2017: Microbiological products. Cormobacterinum. Specifications

GOST R 57682-2017: Microbiological products. Technical xanthan. Specifications

GOST R 57683-2017: Microbiological products. Microbial Protein Concentrate Feed 60 %. Specifications

GOST R 57684-2017: Microbiological products. Bio stimulator crop growth. General requirements

GOST R 57736-2017: Mining equpment. Mine auxiliary fans. General specifications

GOST R 57776-2017: Fibre reinforced thermosetting plastic pipes. Nondestructive testing method with manufacturing

GOST R 57784-2017: Breeding registed cattle. Methods of determination of productive parameters of beef cattle

GOST R 57817-2017: Underground gas storage. Design standards

GOST R 57841-2017: Mining equipment. Belt conveyor rollers. General specifications

GOST R 57850-2017: Fodder threonine. Specifications

GOST R 57878-2017: Agricultural pedigree cattle. Methods of determination of productivity parameters of horned cattle of milk and combined directions

GOST R 57879-2017: Agricultural pedigree cattle. Methods of determination of pigs productivity parameters

GOST R 57894-2017: Equipment for electron beam processing. General requirements

GOST R 57896-2017: Equipment for zone refining of refractory metal without crucible. General requirements

GOST R 57897-2017: Units for ceramic core’s removal. General requirements

GOST R 57898-2017: Induction-metallurgical method of surfacing. Materials for surfacing

GOST R 57992-2017: Trunk pipeline transport of oil and oil products. Cast iron ballast units. General specifications

GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications

GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications

GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications

GOST R 58190-2018: Trunk pipeline transport of oil and oil products. Heavyweight marine booms for localization oil and oil products spill in seas. General specifications

GOST R 58199-2018: Mining equipment. Anchor bolt of composite materials. General specifications

GOST R 58200-2018: Mining equipment. Powered face systems. General safety requirements

GOST R 58201-2018: Mining drilling for pneumatic and hydraulic anchorage installers. General specifications

GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements

GOST R 58257-2018: Trunk pipeline transport of oil and oil products. Fabric ballasting devices. General specifications

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

GOST R 8.598-2003: State system for ensuring the uniformity of measurements. Weighbridges for weighing of cinder vehicles in motion. Verification procedure

GOST R 8.603-2003: State system for ensuring the uniformity of measurements. Weighbridges for weighing of road vehicles in motion. Verification procedure

GOST R 8.637-2007: State system for ensuring the uniformity of measurements. Certified reference materials for metrological maintenance of pipeline non-destructive testing equipment. General requirements

GOST R 8.733-2011: State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements

GOST R 8.776-2011: State system for ensuring the uniformity of measurements. Certified reference materials of composition of gas Mixtures. General metrological and technical requirements

GOST R 8.915-2016: State system for ensuring the uniformity of measurements. Diaphragm volumetric gas meters. General technical requirements, test and calibration methods

GOST R 8.918-2016: State system ensuring the uniformity of measurements. Reference materials refinery gases. General metrological and technical requirements

Manual: Manual for impulse and low consumption fire extinguishing systems

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 12-27.2006: Methodological manual for conducting labor protection training for executives and specialists of construction organizations

MDS 81-39.2005: Individual elemental estimate of the consumption rate of materials and labor costs for the finishing of the premises with KNAUF complete systems. Standard flow charts for finishing works using KNAUF complete systems. Volume 1. Individual elemental estimat

MI 1382-86: Guidelines. Protractor pendulum. Type ZURI-M. Method of verification

MI 1515-86: Guidelines. State system for ensuring uniformity of measurements. Rail flaw detector GSP.MD-22FD-11E. Method of verification

MI 1540-91: State system for ensuring uniformity of measurements. Dispensers weight discrete action. Method of verification

MI 1673-87: State system for ensuring uniformity of measurements. Stakes and supports for gage heads. Methods of control

MI 1724-87: Guidelines. State system for ensuring uniformity of measurements. Thickness gauge indicator with the price division of 0.01 and 0.1 mm. Method of verification

MI 1799-87: Guidelines. Squares testing 90 degrees. Control method

MI 1864-88: State system for ensuring uniformity of measurements. Fuel dispensers. Method of verification

MI 1893-88: Recommendations. Probes. Methods of control

MI 2018-89: State system for ensuring uniformity of measurements. Micrometric depth gauges. Method of verification

MI 2029-89: Calibration and marking prisms with one prismatic recess and grip. Methods of control

MI 2031-89: Calibration and marking iron prisms. Methods of control

MI 2066-90: Sets of accessories to plane-parallel end measures of length

MI 2504-98: Recommendation. State system for ensuring uniformity of measurements. Fuel dispensers. Method of testing using the M2r-SS mermers

MI 2520-99: State system for ensuring uniformity of measurements. Scales electromechanical heavy. Method of verification

MI 2845-2003: State system for ensuring uniformity of measurements. Measuring voltage transformers 6

MI 2895-2004: Recommendation. GSE. Fuel dispensers. The method of periodic calibration. Merniki with special scales

MI 2925-2005: Measuring voltage transformers 35… 330

MI 3000-2006: GSOEI. Systems automated information-measuring commercial accounting of electric energy. Typical method of verification

MI 3000-2018: Recommendation. State system for ensuring uniformity of measurements. Systems automated information-measuring commercial accounting of electric energy. Method of verification

MI 3022-2006: Recommendation. State system for ensuring uniformity of measurements. Normalization of the load of the secondary circuits of measuring current transformers

MI 3023-2006: Recommendation. State system for ensuring uniformity of measurements. Normalization of the load of the secondary circuits of measuring voltage transformers

MI 3050-2007: State system for ensuring uniformity of measurements. Voltage transformers measuring. Methods of on-site verification using PVE voltage converters

MI 3114-2008: State system for ensuring the uniformity of measurements. Automatic weighing instruments for weighing road vehicles in motion and determine the axial load on roadway. Methods of verification

MI 3145-2008: State system for ensuring uniformity of measurements. Small-sized heavy-duty scales for static weighing. Method of calibration using standard scales

MI 3239-2009: State system for ensuring uniformity of measurements. Measuring voltage transformers. Methods of verification at the site of operation using a three-phase high-voltage calibration installation "Installation of UPTV-3-10"

MI 524-89: Recommendation. GSE. Stangenzubomery with nonius. Types of SHZN-18, SHZN-40. Method of verification

MR 1.2.0022-11: Sampling procedure for nanomaterials control

MU 0397-00.001: Method of nondestructive testing of parts of the mud pump U8-6MA2

MU 0397-00.002: Non-Destructive Testing Methodology for VE-50 and VP-50 Swivels

MU 0397-00.003: Method of non-destructive testing of turbodrill parts

MU 0397-00.004: Methods of conducting non-destructive testing of parts of the boiler installation PPUA-1600/100

MU 0397-00.005: Methods of conducting non-destructive testing of parts of KTGU type keys

MU 0397-00.006: Non-Destructive Testing Technique for the A-50U Tack Block

MU 0397-00.007: Methods of non-destructive ultrasonic testing of elevators ETA, EHL, KM

MU 0397-00.008: Method of non-destructive testing of parts for the heating device of the ADPM-12 unit/150-У1

MU 0397-00.009: Method of non-destructive testing of parts of centrifugal pumps such as CNS 38-44 ... 220, CNS 60-198, CNS 105-98, CNS 180-476 ... 686, CNS 300-120 ... 600, CNS 500-19002

MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)

MU 1.2.2740-10: Sampling procedure for identifying, identifying and characterizing the action of nanomaterials in aquatic invertebrates

MU 1.2.2741-10: Sampling procedure for the identification and identification of nanomaterials in laboratory animals

MU 1.2.2744-10: Sampling procedure for the identification and identification of nanomaterials in fish

MU 1.2.2745-10: Sampling procedure for characterizing the action of nanomaterials on laboratory animals

MU 1002-00.004: Methods of conducting non-destructive ultrasonic testing of steam double-drum boilers of the type DE and Е-1-9

MU 1198-00.002: Methods of non-destructive ultrasonic testing of the weld zone of drill pipes of the TBPV type

MU 1198-00.003: Method of non-destructive ultrasonic testing of the crown block UKB-6-200

MU 1198-00.006: Method of conducting non-destructive testing of the pulley block

MU 1198-00.007: Method of nondestructive testing of hook blocks and lifting hooks

MU 1198-00.008: Method for non-destructive testing of brake bands of drawworks and winches of units for underground and workover of wells

MU 1198-00.009: UTBC-5-170 hook block non-destructive testing methodology

MU 1198-00.010: Method for the non-destructive testing of shaft shaft winch LV-15

MU 1198-00.011: PBC-4 key non-destructive testing procedure

MU 1198-00.012: Methods of conducting non-destructive testing of HC-250 swivels

MU 1798-00.003: Methods of conducting non-destructive ultrasonic inspection of parts of the column head

MU 3702-00.002: Method of non-destructive ultrasonic testing of parts of the valve ZMS1-65х210

MU 3927-85: Guidelines for the sanitary supervision of the design, release of manual machines and the working conditions of workers in vibration-hazard professions

MU 4296/755-00.006: R-560 non-destructive ultrasonic testing of the rotor shaft

MU 4296/755-00.011: Method of conducting non-destructive ultrasonic testing of gearbox KPC-700

MU 4296/755-00.014: Method for non-destructive ultrasound testing of wellhead armature AUSHGN-UHL

MU 4296/755-00.017: Method of non-destructive ultrasonic testing of the compressor K5M

MU 4296/755-00.021: Methods for conducting non-destructive ultrasonic testing of a tube block furnace PTB-10

MU 4296/755-00.023: Method of nondestructive testing of the worm box of the APR-2VB submachine gun

MU 6096-00.001: Method for the non-destructive testing of the shaft of the LV-44 winch

MU 6096-00.002: R-700 rotor shaft non-destructive testing procedure

MU 6096-00.003: R-950 rotor shaft non-destructive testing method

MU OT RM 02-99: Assessment of the safety of workplaces for their certification of working conditions

MVI 1-06: Methods for measuring the content of nitrogen oxides, carbon monoxide and oxygen using a set of indicator tubes in organized emissions of boiler houses, CHP plants and state district power plants running on natural gas

MVI 2-05: Methods for measuring the mass concentration of vapors of petroleum products, technical mixtures and solvents in sources of air pollution and in the air of the working area using indicator tubes

MVI.MN 2665-2007: Determination of the content of phenolic and furan compounds in cognac spirits, cognacs and cognac products by high-performance liquid chromatography. Measurement procedure

MVI.MN 3008-2008: Method for determining the mass fraction of pantothenic acid in specialized foods and dietary supplements

MVI.MN 3239-2009: Determination of B-carotene in specialized foods

MVI.MN 3491-2010: Methods for measuring the content of chlorides in specialized products for baby food

NB ZhT TsT 05-98: Diesel engines of locomotives and self-propelled trains. Safety Regulations

NPB 22-96: Automatic gas fire fighting facilities. rules and regulations for designing and application

NPB 239-97: Ventilation Ducts. The test method for the fire resistance

NPB 241-97: Fire dampers of ventilation systems. The test method for the fire resistance

NPB 253-98: The equipment of smoke control systems. Fans. The test method for the fire resistance

NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods

NPB 54-2001: Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods

NPB 54-96: Automatic Gaseous Agent Fire Extinguishing Systems. Modular Components and Cylinders. General Technical Requirements. Test Methods

NPB 58-97: Address fire alarm systems. General technical requirements. Test methods

NPB 61-97: Fire engineering. Foam fire fighting systems. Low expansion foam generators for subsurface fire fighting systems of the tanks. General technical requirements. Test methods

NPB 62-97: Water and foam extinguishing installations. Fire-fighting foam mixers and feeder. Schedule of indicators. General technical requirements. Testing methods

NPB 63-97: Automatic foam fire extinguishing installations feeders. general technical requirements. test methods

NPB 65-97: Optical and Electronic Optical detectors. General Technical Requirement. Testing Procedure

NPB 66-97: Self-contained fire detectors. General technical requirements. Test methods

NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods

NPB 73-98: Fire engineering. Generators of extinguishing aerosol of operative application. General technical requirements. Test methods

NPB 76-98: Fire detectors. General technical requirements. Test methods

NPB 77-98: Fire alarm systems and evacuation management. General technical requirements and test methods

NPB 78-99: Automatic gas fire extinguishing systems. Isothermal reservoirs. General technical requirements. Testing methods.

NPB 79-99: Automatic gas fire extinguishing systems. Distribution valves. General technical requirements. Test methods

NPB 80-99: Automatic fire water mist spray extinguishing systems. modules. General technical requirements. Test methods

NPB 81-99: Detectors using ionization. General technical requirements. Test methods

NPB 82-99: Optical beam smoke detectors. General technical requirements. Test methods

NPB 83-99: Automatic water and foam fire extinguishing installations. Wet and dry system alarm stations. General technical requirements. test methods

NPB 86-2000: Direct current power supplies fire-protective systems. General technical requirements. test methods

NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

ODM 218.2.074-2016: Guidelines for the use of structural composite anchors for the device of transverse and longitudinal expansion joints instead of steel anchor rods in hard type coatings

ODM 218.2.075-2016: Guidelines for the use of structural composite grids and gratings instead of steel when used to strengthen the arches of tunnels and retaining walls by the method of gunning

ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei

ONTP 02-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Woodworking Shops

ONTP 02-94: Sectoral norms of technological design of enterprises in the automotive industry. Woodworking shops (sites)

ONTP 04-85: All-Union norms for technological design of timber transshipment enterprises

ONTP 04-86: All-Union norms for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Shops of cold sheet metal stamping

ONTP 04-94: Sectoral norms of technological design of enterprises in the automotive industry. Shops of cold sheet metal stamping

ONTP 06-86: All-Union norms for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Workshops for the manufacture of special technological and non-standardized equipment, means of mechanization and automation an

ONTP 06-95: Sectoral norms of technological design of enterprises in the automotive industry. Workshops for the manufacture of special technological and non-standardized equipment, means of mechanization, automation, and office equipment

ONTP 07-85: All-Union norms for the technological design of precast concrete enterprises

ONTP 08-87: All-Union norms for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the repair of pipelines, sanitary appliances and heat and power equipment

ONTP 08-96: Sectoral norms of technological design of enterprises in the automotive industry. Workshops for the repair of sanitary and heat power equipment

ONTP 09-85: All-Union norms of technological design of enterprises for the production of products from cellular and dense autoclaved concrete

ONTP 09-88: All-Union standards for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Assembly and welding shops

ONTP 09-96: Sectoral norms of technological design of enterprises in the automotive industry. Assembly and welding shops

ONTP 10-85: All-Union norms of technological design of production for the manufacture of products from metal powders based on iron and copper

ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)

ONTP 11-94: Sectoral norms of technological design of enterprises in the automotive industry. Repair shops of electrical equipment

ONTP 14-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises (refinement of ONTP-14-93). Mechanical processing assembly shops

ONTP 444-86: National Engineering Design Standards for Facilities for the Production of Mineral Wool Products and Building Components

OST 108.030.40-79: Pipe elements of hear surfaces, connecting pipes with boiler, land-type steam boiler headers. General specifications.

OST 108.838.10-80: Remote cyclones for low- and middle pressure boilers. General specifications.

OST 2 N83-44-80: Occupational safety standards system. Arc and electroslag welding. Safety requirements

OST 2 N83-45-80: Occupational safety standards system. Contact welding. Safety requirements

OST 2 N83-46-80: Occupational safety standards system. Oxygen cutting. Safety requirements

OST 2 Н83-44-80: Occupational safety standards system. Electric arc welding and slag welding. Safety requirements.

OST 2 Н83-45-80: Labour safety standard system. Contact welding. Safety requirements.

OST 2 Н83-46-80: Labour safety standard system. Oxygen cutting. Safety requirements.

OST 21.112.0.001-85: Constructional materials industry safety standard system.

OST 22-1260-78: Machine cutting torches for piled-plate cutting by means of reduced pressure oxygen. Specifications.

OST 24.023.31-85: Multi-casting steel in forging ingots. Typical technological process.

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.149.03-89: Cogwheels for traction rolling stock of mainline railways. Technical conditions.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.452-92: Occupational safety standards system. Rotor drum vacuum baking ovens in explosion-proof design. General safety requirements.

OST 26-01-1183-82: Aluminium vessels and devices. General technical specifications.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-02-910-80: Condensate expanders. Specifications

OST 26-04-2153-77: Labour safety standard system. Cryogenic equipment. General safety requirements and constructions.

OST 26-06-2028-96: Labour safety standard system. General purpose industrial grade pumps. Safety requirements.

OST 26-07-2047-82: Pipeline fittings. Technology and methods of fastening of sealing rings from fluoroplastic-4 in gates.

OST 26-07-2051-82: Pipeline fittings. Climatic tests methods.

OST 26-07-420-83: Pipeline fittings. Torques on flywheels (steering wheels), double-arm and single-arm handles (keys).

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 32.146-2000: Devices of railway automation, telemechanics and telecommunications. General specification requirements

OST 35-10-80: Occupational safety standards system. Building of roadbed of railways and roads. Safety requirements.

OST 35-14-82: Occupational safety standards system. Construction of highways. Concrete coatings. Safety requirements at works performance.

OST 35-23-83: Occupational safety standards system. Construction of highways. Asphalt and concrete and black coatings and foundations. Safety requirements.

OST 36-100.2.03-84: Occupational safety standards system. Labour saving tools. Installation tools and devices. General safety and ergonomics requirements.

OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.

OST 36-122-85: Steel building structures. Field connections on dowels. General requirements.

OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.

OST 36-28-78: Occupational safety standards system. Production process. Handling operations. General safety requirements.

OST 36-37-79: Labour safety standard system. Lifting mechanisms with a manual drive. General ergonomic and safety standards.

OST 45.119-99: Occupational safety standards system. Points of regeneration fiber optic transmission lines. General safety requirements

OST 45.148-99: Security systems against unauthorized access to payphone communication services. General technical requirements

OST 45.14-96: Occupational safety standards system. Unattended and regenerative amplifier units. General safety requirements

OST 45.170-2000: Remote control systems for coin box sets. General technical specifications, testing and control methods.

OST 45.199-99: Occupational safety standards system. Regenerative points of fiber-optic transmission lines. General safety requirements

OST 45.50-96: Automatic container telephone exchanges. General technical requirements.

OST 45.97-97: Equipment echo and ehocompensation for communication lines. Types, basic parameters, technical requirements

OST 5R.9527-94: Pipes and products of general purpose marine systems. Cleaning and preservation (before installation). Typical processes.

OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval

OST 68-12.0.01-02: Sectoral system of standards for labor safety. Main provisions

OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.

OTT 08042462: Instruments and automation equipment for nuclear power plants. General technical requirements

P SSFZhT 45/ISO 9001-2003: The certification system on the federal railway transport of the Russian Federation. Quality Management System. Requirements

PB 08-389-00: Safety Rules for Gas Processing Plants Production

PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries

PB 09-592-03: Rules for arrangement and safe operation of refrigerating systems

PB 11-242-98: Foundry Safety Requirements

PB 13-84-95: Installation Standards for Charging, Delivery, And Mixing Equipment Intended for Mechanization of Blasting Operations

PND F 13.1.3-97: Methods for measuring the mass concentration of sulfur dioxide in exhaust gases from boilers, CHP, GRES and other fuel-burning units.

PNST 159-2016: Automatic information and measuring system of commercial accounting of electric energy. General specifications

PNST 16-2014: Mining equipment. Multipurpose safety systems for coal mines. Monitoring system of an aerological condition of excavations. General technical requirements and test methods

PNST 162-2016: Mining equipment. Multipurpose safety systems and automated control systems for technological processes in the mine. General technical requirements

PNST 17-2014: Mining equipment. Multipurpose safety systems for coal mines. Systems for observation and notification of an accident. General technical requirements

PNST 18-2014: Mining equipment. Multipurpose safety systems for coal mines. System for searching and localization persons in accident. General technical requirements and test methods

PNST 246-2017: Automobile roads of general use. Petroleum bituminous binding materials. Method for isolation of bituminous binder using a rotary evaporator

PNST 296-2018: Mining. Points of switching in self-rescuers. General technical requirements

PNST 305-2018: Rolling stock working on liquefied natural gas. Methods for taking samples and analyzing the content of oils and impurities in the used liquefied natural gas

PNST 56-2015: Fireproof safes. Requirements and test methods for fire resistance

PNST 84-2016: Automobile roads of general use. Viscous petroleum road bitumens. Method of aging under the action of pressure and temperature (PAV)

R 466-82: Guidelines for conducting induction training on labor protection in organizations and enterprises of the Ministry of Oil and Gas Industry

R 50-601-21-92: Recommendations. Establishment of product safety requirements in standards and technical conditions

R 78.36.018-2011: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Dye penetrant inspection.

RD 03-29-93: Instructional Guidelines For Engineering Certification of Steam and Hot-Water Boilers, Pressure Vessels, Steam and Hot-Water Pipelines

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair

RD 08-272-99: Safety requirements for drilling equipment for the oil and gas industry.

RD 09-167-97: Instructions for Arranging and Carrying out the Inspection in Design and Manufacture of Hazardous Production Facilities in the Chemical, Petrochemical and Oil Refining Industries

RD 10-197-98: Guidelines for Operating Condition Assessment of Bolted and Riveted Joints of Hoisting Cranes

RD 10-210-98: Procedural Guidelines for Technical Inspection of Metal Structures of Steam and Hot Water Boilers

RD 13-03-2006: Guidelines on the procedure for conducting eddy current testing of technical devices and structures used and operated at hazardous production facilities

RD 13-04-2006: Guidelines on the procedure for conducting thermal control of technical devices and structures used and operated at hazardous production facilities

RD 13-05-2006: Methodical recommendations on the procedure for conducting magnetic particle inspection of technical devices and structures used and operated at hazardous production facilities

RD 13-06-2006: Guidelines for the procedure for capillary control of technical devices and structures used and operated at hazardous production facilities

RD 153-34.0-20.608-2003: Guidelines. Project work for the repair of power equipment power plants. Requirements for the composition, content and design

RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.

RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants

RD 153-34.1-35.127-2002: General technical requirements for program and technical complex for technological process automated control system of thermal power plant

RD 153-34.1-35.137-00: Technical requirements for microprocessor technology based process protection subsystem

RD 153-39.1-36-99: Recommendations for the unification of oil pumps for oil refineries

RD 2082-18-2005: Technical diagnosis and design life prolongation program for cryogenic tank.

RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface

RD 31.28.09-93: Ship bearing bushes with antifriction layer of tin and lead alloy. Technical requirements on materials. Typical technological processes.

RD 31.31.41-86: Support Facilities for Loading/Offloading Operations. Design Standards

RD 31.81.01-87: Safety requirements for inland and mixed navigation and marine equipment.

RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.

RD 31.84.01-90: Uniform occupational safety rules for diving operations

RD 34.03.204: Safety rules when working with tools and accessories

RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements

RD 34.20.162: Recommended Practice for the Design Organization Operation of Hydroelectric Generating Stations and Hydroelectric Pumped Storage Power Plants

RD 34.40.201-91: Procedural Guidelines for Modernization of Atmospheric-Pressure and Elevated-Pressure Deaeration Columns

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions

RD 45.191-2001: Call Service Centers. General technical requirements

RD 45.248-2002: System of emergency supervision of communication network installations. General technical requirements

RD 50-186-80: Guidelines. Reliability in technology. Methods of choice, regulation and control of environments for gas and liquid nitriding

RD 50-187-80: Guidelines. Reliability in technology. Hardening of steel products by chemical and heat treatment. Diffusion chrome plating

RD 50-363-82: D.C. measuring high-voltage dividers. Methods and means of verification

RD 50-408-83: Guidelines. Methods for performing holographic interference measurements with speckle noise elimination

RD 50-447-83: Guidelines. Calculations and tests of strength. Acoustic emission. General provisions

RD 50-664-88: Guidelines. Metallic and non-metallic inorganic coatings. Electrolyte preparation and correction methods

RD 52.04.716-2009: Rules of operation of civil aerodrome weather equipment.

RD 52.37.726-2010: General technical requirements for means of influence on meteorological and other geophysical processes

RD 52.37.754-2011: Standards of time and standards for the number of works on the organization and conduct of anti-hail protection. High Mountain Geophysical Institute (WGI)

RD EO 0505-03: Instructions for metal styloscope

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RMG 133-2013: State system for ensuring the uniformity of measurements. The automated data-measuring systems for the commercial metering of electric power. Model verification procedure

RST RSFSR 721-84: Product Quality Rating System. Instruments and Equipment for Testing of Road Pavements, Roadbeds, Materials, and Soils. Index of Properties

RST RSFSR 793-91: Valves, type distributing for fuels, oils and special liquids. General technical conditions

RTM 36.44.12.2-90: Design and Installation of Foundations Using Pile Driven by Pushing

SanPiN 1.2.681-97: Hygienic requirements for production and safety of perfumes and cosmetics

SanPiN 2.3.4.704-98: Production of rectified ethyl spirits, liquor and vodka products

SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production

SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.

SO 34.35.146-2003: Guidelines for the creation of automated process control systems for water treatment plants (TLU) power plants

SO 34.35.677-2003: Technical requirements for the automated control system for gas-oil-fired boiler burners to enhance explosion safety during ignition of burners

SP 1.2.1170-02: Hygienic requirements to safety of agrochemicals

SP 12-133-2000: Safety in construction. Statutes on the procedure for certification of work stations by working conditions in construction and housing and utilities.

SP 325.1325800.2017: Buildings and construction. Rules for the production of demolition and recycling

SP 4053-85: Sanitary Rules on the installation and operation of equipment for plasma treatment of materials

SP 4950-89: Sanitary regulations for the production of carbon-based materials (coal, graphitized, fibrous, composite)

SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations

ST RK 1447-2005: Pre-stressed reinforced concrete sleepers for railway with gage 1520 mm. General specification

ST RK 1450-2005: Non-destructive testing. Weld joints of railway bridges, locomotives and cars. Ultrasonic methods

ST RK 1520-2006: Locomotives with gage 1520 mm. Requirements for application of ecological control

ST RK 1976-2010: Fire engineering. Tower ladders. General specification

ST RK 1980-2010: Fire engineering. Basic fire fighting trucks. General specification

ST RK 1981-2010: Fire engineering. Fire aerial ladders. General specification

ST RK 2431-2013: Multiple unit passenger trains composed of locomotive-hauled cars with systems of pneumatic suspension and body tilt. General specification

ST RK 2558-2014: Industrial explosives. Cartridges № 6 gw of ammonite and ammonal in polyethylene coating. Specifications.

ST RK 2651-2015: Containers made of polypropylene. Specifications.

ST RK 986-2012: Road vehicles. State registration licence plates of retroreflective surface for motor vehicles and their trailers, and blank plates. Specification. Put into effect in substitution of ST RK 986-2003

ST RK STB 1315-2008: Canned food. Method for determination of tin and lead content by stripping voltammetry using TA analyzers

ST SSFZhT TsP 016-99: Special rolling stock. Typical test methods for strength of supporting metal structures of frames, bodies, working bodies and their fastening elements

ST SSFZhT TsP 017-99: Special rolling stock. Typical methods of dynamic (running) tests

ST SSFZhT TsP 054-99: Special rolling stock. Rubble cleaning machines. Typical test methods to verify the functional indicators related to traffic safety and safety indicators in the area of working bodies

ST SSFZhT TsP 055-99: Special rolling stock. Machines for cutting ballast in between. Typical test methods for determining the indicators of functional and occupational safety in the area of the working bodies

ST SSFZhT TsP 056-99: Special rolling stock. Machines for the formation of ballast section, planning and redistribution of ballast. Typical test methods for determining safety performance indicators in the working area

ST SSFZhT TsP 057-99: Special rolling stock. Machines for changing sleepers. Typical test methods for determining the indicators of functional and occupational safety in the area of the working bodies

ST SSFZhT TsP 058-99: Special rolling stock. Machines for compaction and stabilization of ballast. Typical test methods for determining the indicators of functional and occupational safety in the area of the working bodies

ST SSFZhT TsP 059-99: Special rolling stock. Machines for bearing, tamping and leveling path. Typical test methods to verify the functional indicators related to traffic safety and safety indicators in the area of working bodies

ST SSFZhT TsP 060-99: Special rolling stock. Machines for the transportation, loading and unloading of materials of the upper structure of the track and track equipment (except for lifting mechanisms) and delivery of crews to the place of work. Typical test methods for determi

ST SSFZhT TsP 061-99: Special rolling stock. Machines for cleaning rails from contaminants and trimming ballast in sleeper boxes. Typical test methods for determining safety performance indicators in the working area

ST SSFZhT TsP 062-99: Special rolling stock. Machines for fastening and lubrication of rail fasteners. Typical test methods for determining safety performance indicators in the working area

ST SSFZhT TsP 063-99: Special rolling stock. Rail grinding machines and trains. Typical test methods for determining safety performance indicators in the working area

ST SSFZhT TsP 064-99: Special rolling stock. Rail welding machines. Typical test methods for determining the indicators of functional and occupational safety in the area of the working bodies

ST SSFZhT TsP 065-99: Special rolling stock. Traction power machines. Typical test methods for determining safety performance indicators related to the functioning

ST SSFZhT TsP 066-99: Special rolling stock. Machines for cleaning roads from snow, ice and weeds. Typical test methods for determining the indicators of functional and occupational safety in the area of the working bodies

ST SSFZhT TsP 067-99: Special rolling stock. Self-propelled rolling stock track-measuring and flaw-proof (except for measuring systems). Typical test methods for determining safety performance indicators in the working area

ST SSFZhT TsP 068-99: Special rolling stock. Tracklaying cranes and engine platforms. Typical test methods for determining safety performance indicators in the working area

ST SSFZhT TsP 069-99: Special rolling stock. Special rolling stock for the transport of switches. Typical test methods for determining safety performance indicators in the working area

ST SSFZhT TsP 071-99: Special rolling stock. Typical methods of brake testing.

ST SSFZhT TsP 086-2000: Special rolling stock. Wheel pairs with axle boxes and their components. Typical test methods for strength.

ST SSFZhT TsP 087-2000: Special rolling stock. Formulations for weeds. Typical test methods for verifying safety performance indicators in the area of operation of working bodies and functional indicators related to traffic safety

ST SSFZhT TsP 123-2001: Special rolling stock. Brush cutters. Typical test methods for calibration of labor safety indicators in the area of the working bodies.

ST SSFZhT TsP 145-2002: Special rolling stock. Cuvette cleaning machines. Typical test methods for verification of indicators related to traffic safety.

ST SSFZhT TsT 046-99: Shaft cardan main drive diesel locomotives and diesel trains. Typical test method

ST SSFZhT TsT 049-99: Transmission hydraulic for diesel locomotives and diesel trains. Typical test method

ST SSFZhT TsT 085-2000: Locomotives and wagon rolling stock. Wheel pairs with axle boxes and their components. Typical test methods for strength.

ST SSFZhT TsT 16-98: Traction rolling stock. Typical methods of dynamic strength tests of electric trains and diesel trains

ST SSFZhT TsT-RB 090-2000: Cranes, type shooting on the course. Typical strength test

ST SSFZhT TsT-TsL-TsV 111-2001: Hydraulic dampers of railway rolling stock. Standard testing method.

ST SSFZhT TsT-TsRB 091-2000: Jib cranes on the rail track. Typical methods of brake testing.

ST SSFZhT TsT-TsRB 092-2000: Jib cranes on the rail track. Typical methods of dynamic (running) test drive

ST SSFZhT TsT-TsV 045-99: Brake cylinders of railroad rolling stock. Standard testing method.

ST TsKBA 018-2007: Pipe fittings. Heat treatment of blanks (parts) of titanium and titanium alloys. Typical process

ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions

ST TsKBA 039-2010: Pipe fittings. Periodic testing of bellows. General requirements

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements

ST TsKBA 055-2008: Pipe fittings. Valves valves with fluoroplast-4 seal and composite materials. Technical requirements and methods of mounting the sealing rings

ST TsKBA 072-2009: Pipe fittings. Torques and dimensions of flywheels and handles

ST TsKBA 080-2009: Pipe fittings. Methods of testing for seismic resistance

ST TsKBA 080-2015: Pipe fittings. Methods of testing for seismic resistance

ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions

STA 25.03.02-2004: Combined security system

STB 1172-99: Non-destructive testing. Control with penetrating (capillary) substances. General provisions

STB 1208-2000: Construction and finishing machines. General safety requirements. Test methods

STB 1313-2002: Foodstuffs and food raw materials. Method for determining the content of toxic zinc, cadmium, lead and copper elements by anodic stripping voltammetry on the TA analyser

STB 1314-2002: Milk and milk products. Method for determining the content of toxic zinc, cadmium, lead and copper elements by anodic stripping voltammetry on the TA analyser

STB 1315-2002: Canned products. Method for determining the content of stannum and lead by anodic stripping voltammetry on the TA analyser

STB 1575-2005: Mechanized timberings for benches. Basic parameters. General specifications. Test methods

STB 1734-2007: Chemical fibers and fabrics (synthetic). Safety requirements

STB 1907-2008: Cognac spirits, cognacs, wines and wine materials, liqueurs and tinctures. Method for determination of carbohydrates and glycerol by high performance liquid chromatography

STB 1982-2009: Wine products and wine-making raw materials. Method for determination of organic acids by high performance liquid chromatography

STO 1.1.1.04.001.0870-2012: Fire safety requirements for the decommissioning of nuclear power units

STO 1.1.1.07.001.0675-2008: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements

STO 1.1.1.07.001.0675-2017: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements

TR 162-04: Technical recommendations on the use of reinforced concrete pipes with an inner plastic sheath

TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow

TR 88-98: Technical recommendations on the installation technology of polymer concrete pipes for microtunnel laying of sewers with an internal diameter of 300-1200 mm

TU 1390-012-86695843-2011: Steel pipes and fittings 57–2020 mm in diameter with internal single-layer coating based on liquid solvent-free epoxy materials

TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines

TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions

TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions

TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions

TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions

TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions

TU 2245-024-82119587-2007: Thermal protective tape "Terma". Technical conditions

TU 24-00.10.019-88: Two-line manual lubricating station. Technical conditions

TU 26-02-1089-88: Type 1-AVG horizontal air coolers Technical conditions

TU 26-02-1098-89: Heat exchangers, shell and tube made of titanium. Technical conditions

TU 26-14-100-90: Single cyclones of the type СЦН-40 of the right and left execution. Technical conditions

TU 26-14-99-91: DP-10M smoke exhauster. Technical conditions

TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions

TU 34-10-10173-80: Mobile boiler room PKBM - 10

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions

TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them

TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions

TU 5369-004-54965805-05: Wooden glued blanks and details for interior decoration

TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT

VNTP 03-91: Departmental standards of technological design of sugar beet factories. Volume 2, Part 1. Appendices

VNTP 04-94k: Standards for technological design of enterprises for processing potatoes for starch

VNTP 21-92: Standards for technological design of enterprises of the confectionery industry

VNTP 37-86: Standards for technological design of non-ferrous metallurgy mines with underground mining

VRD 39-1.13-059-2002: Guidelines to Measurement of Pollutant Concentration and Gas and Air Flow Velocities in Stationary Natural-Gas-Fired Engines

ATK-RE 2015: Shell-and-tube heat exchangers and tube-in-tube heat exchangers. Manual

GOST 12.2.015-93: Machines and equipment for glass industry. General safety requirements

GOST 12.2.016-81: Occupational safety standards system. Gas compressing equipment. General safety requirements

GOST 16955-2019: Compound feed for control fattening pigs. Technical specifications

GOST 21055-2019: Compound feeds for bacon fattening pigs. Technical specifications

GOST 28672-2019: Barley. Technical conditions

GOST 28673-2019: Oats Technical specifications

GOST 28674-2019: Peas. Technical specifications

GOST 33411-2015: Raw materials and food products. Determination of the mass fraction of arsenic by atomic absorption method with the generation of hydrides

GOST 33412-2015: Raw materials and food products. Determination of the mass fraction of mercury by flameless atomic absorption

GOST 33413-2015: Raw materials and food products. Determination of the mass fraction of tin by atomic absorption method

GOST 33416-2015: Metal rolling covers. General specifications

GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements

GOST 34498-2018: Agricultural machinery. Machines for post-harvest processing of vegetables and gourds. Test methods

GOST 34510-2018: Cogwheels of traction gears of traction rolling stock. Methods for determining bending and contact fatigue strength

GOST 34513-2018: Non-destructive testing system for railway products. Key Points

GOST 34564-2019: The main pipeline transport of oil and oil products. Gear pumps. General specifications

GOST 34565-2019: The main pipeline transport of oil and oil products. Piston and plunger pumps. General specifications

GOST 34566-2019: Compound feeds for laboratory animals. Technical conditions

GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST 34599-2019: Semi-solid and solid fibreboard. Technical conditions

GOST 34611-2019: Pipe fittings. Earthquake Testing Methodology

GOST 34624-2019: Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems

GOST 7066-2019: Food lentils. Technical specifications

GOST R 52365-2019: Filling devices. Requirements for test methods of resistance to protective properties and resistance to unauthorized opening

GOST R 53299-2019: Ducts. Fire test method

GOST R 53301-2019: Valves for fire ventilation systems. Fire test method

GOST R 55154-2019: Mining equipment. Multifunctional coal mine safety systems. General technical requirements

GOST R 58336-2018: Anchor angles. Test methods

GOST R 58361-2019: The main pipeline transport of oil and oil products. Welding equipment. General specifications

GOST R 58387-2019: Glue anchors for fastening in concrete. Test methods

GOST R 58400.5-2019: General automobile roads. Bituminous petroleum binders. Pressure and Temperature Aging (PAV)

GOST R 58432-2019: Laser hardening of mechanical engineering parts. Technological process

GOST R 58493-2019: Mining equipment. Drilling machines. General technical requirements and test methods

GOST R 58584-2019: Mining engineering. Switch points in self-rescuers. Safety requirements. Test methods

GOST R 58585-2019: Mining equipment. General safety requirements for power supply and control systems

GOST R 58599-2019: Technical diagnostics. Diagnostics of steel structures. Magnetic coercimetric method. General requirements

GOST R 58604-2019: Unified energy system and isolated energy systems. Thermal power plants. Automated process control systems. Terms of creation. Norms and Requirements

GOST R 58605-2019: Mines apatite-nepheline mined. Technical specifications

GOST R 58617-2019: The main pipeline transport of oil and oil products. Capacities and tanks horizontal steel. General specifications

GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications

GOST R 58619-2019: The main pipeline transport of oil and oil products. Tank equipment. Pontoons. General specifications

GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications

GOST R 58658-2019: Agricultural products, raw materials and food with improved environmental performance. Mineral fertilizer. General specifications

GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions

GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions

GOST R 58708-2019: Gymnasiums for sports and multipurpose. Two-part dividing curtains. Technical requirements

GOST R 58714-2019: The main pipeline transport of oil and oil products. Pipelines from flexible flat sleeves. General specifications

GOST R 58718-2019: Mining engineering. Flexible mine cables. Methods for checking the possibility of leading shutdown during crushing

GOST R 58754-2019: Mobile scaffolds with a movable workplace. Technical specifications

GOST R 58762-2019: Mobile buildings (inventory). Sanitary systems. General specifications

GOST R 58768-2019: Plastic anchors for fastening in concrete and masonry. Test methods

MP 001-06-2012: Micrometers MK, ML, MT, MZ. Verification Method

MP 001-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) Severstal Ropes JSC Volgogradsky Branch. Verification Method

MP 006-2019: System automated information-measuring commercial accounting of electricity (AIIS KUE) MP EMR

MP 039.M7-19: State system for ensuring uniformity of measurements. Photodiode radiation receivers PDP. Verification Method

MP 135-2019: System automated information-measuring commercial accounting of electricity (AIIS KUE) PJSC "Penzmash". Verification Method

MP 140-2019: Automated information-measuring system for commercial accounting of electric energy (AIIS KUE) of Transneft PJSC in the part of Transneft Vostok LLC at pump station No. 7

MP 201-045-2019: System automated information measuring commercial accounting of electricity (AIIS KUE) UNEG software 220 kV

MP 201-047-2019: System automated information-measuring commercial accounting of electricity (AIIS KUE) UNEG software 220 kV

MP 201-048-2019: System automated information measuring commercial accounting of electricity (AIIS KUE) UNEG software 220 kV

MP 201-049-2019: System automated information-measuring commercial accounting of electricity (AIIS KUE) UNEG software 220 kV

MP 206.1-176-2018: Automated information-measuring system for commercial accounting of electricity (AIIS KUE) of the traction substation "Kirenga" of the East Siberian Railway branch of the Russian Railways OJSC within the boundaries of the Irkutsk Region

MP 206.1-230-2018: System automated information and measuring commercial accounting of electricity (AIIS KUE) of PJSC

MP 207-046-2019: Thermal converters of resistance NNACI. 405211.032. Verification Method

MP 207-046-2019: Thermal converters of resistance NNACI. 405211.032. Verification Method

MP 312235-076-2020: System automated information measuring commercial accounting of electricity AIIS KUE UNEG PS 220 kV Megion. Verification Method

MP 312235-077-2020: RUSENERGOSBYT LLC automated information measuring system for commercial accounting of electric energy (AIIS KUE) for energy supply of the branch of BUNGE CIS LLC in Kolodeznoye. Verification Method

MP 32-2019: Automated information and measuring system for commercial accounting of electric energy (AIIS KUE) of JSC Energy Sales Company (LLC Teplo-Wimm, LLC Vegetables of the South from 35 kV Substation Dalnaya). Verification Method

MP 95-251-2019: State system for ensuring the uniformity of measurements. Analyzers of sulfur and nitrogen ElemeNtS. Verification Method

MP 95-251-2019: State system for ensuring the uniformity of measurements. Analyzers of sulfur and nitrogen ElemeNtS. Verification Method

MP INS-22/11-2019: Radio-electronic digital temperature control complexes "RFSens BTC"

MP INS-22/11-2019: Radio-electronic digital temperature control complexes "RFSens BTC"

MP JePR-205-2019: System automated information measuring commercial accounting of electricity (AIIS KUE) "Limanskaya SES"

MP JePR-205-2019: System automated information measuring commercial accounting of electricity (AIIS KUE) "Limanskaya SES"

MP JePR-227-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) UNEG PP 220kV Amga

MP JePR-227-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) UNEG PP 220kV Amga

MP JePR-230-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) of PJSC "TNS energo Yaroslavl"

MP JePR-230-2020: System automated information and measuring commercial accounting of electricity (AIIS KUE) of PJSC "TNS energo Yaroslavl"

MP JePR-232-2020: Automated information-measuring system for commercial accounting of electricity (AIIS KUE) of LLC "MSC Energo" in terms of electricity supply of LLC "Mine Gramoteinsky"

MP JePR-232-2020: Automated information-measuring system for commercial accounting of electricity (AIIS KUE) of LLC "MSC Energo" in terms of electricity supply of LLC "Mine Gramoteinsky"

MP KCSM-177-2019: System automated information measuring commercial accounting of electricity LLC "Terbunsky potter". Verification Method

MVI.MN 2436-2015: Procedure for measuring the content of chloramphenicol (chloramphenicol) in animal products using the RIDASCREEN® Chloramphenicol and PRODOSCRIN® Chloramphenicol test systems

MVI.MN 2642-2015: Methodology for measuring streptomycin in animal products using the Ridascreen Streptomycin and PRODOSCRINF test systems Streptomycin

MVI.MN 3830-2015: Method for measuring the content of antibiotics of the tetracycline group in animal products by ELISA using the MaxSignal and ELISA antibiotic-tetracycline kits

MVI.MN 3951-2015: Methodology for measuring the content of antibiotics of the tetracycline group in animal products using the Ridascreen®Tetracyclin and PRODOSCRIN® Tetracycline test systems

MVI.MN 4230-2015: Determination of the content of chloramphenicol (chloramphenicol) in milk, milk powder, meat and honey by enzyme immunoassay using the MaxSignal Chloramphenicol (CAP) ELISA Test Kit and IFAantibiotic-chloramphenicol reagents

MVI.MN 4846-2014: Determination of chloramphenicol in raw materials and products of animal origin. The method of making measurements by enzyme immunoassay using a set of reagents "IFA-CHLORAMPHENICOL"

MVI.MN 4885-2014: Method for measuring penicillin content in animal products by ELISA using the MaxSignal kit of reagents manufactured by BIOO Scientific Corporation (USA)

MVI.MN 4894-2014: Method for measuring streptomycin content in products of animal origin by ELISA using the MaxSignal kit of reagents manufactured by BIOO Scientific Corporation (USA)

MVI.MN 5200-2015: Methodology for making measurements. Determination of the content of penicillins in animal feed and food by HPLC-MS / MS

MVI.MN 5336-2015: Methodology for measuring the content of antibiotics of the penicillin group in animal products by ELISA using test systems manufactured by EuroProxima B.V., Netherlands

NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules

NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry

NTP-APK 1.10.04.002-02: Engineering Design Standards for Camel Breeding Facilities

NTP-APK 1.10.06.001-00: Engineering Design Standards for Fur Farms and Rabbit Farms

NTP-APK 1.10.06.002-01: Norms of technological design of enterprises of low power of animal husbandry and rabbit farms

NTP-APK 1.10.09.002-04: Standards of technological design of complexes for the cultivation of champignons

NTP-APK 1.10.09.003-04: Norms of technological design of oyster mushroom growing complexes

NTP-APK 1.10.13.001-03: Norms of technological design of warehouses of solid mineral fertilizers and chemical ameliorants

NTP-APK 1.10.13.002-03: Technological design norms for warehouses of liquid matters for chemicalization

NTP-APK 1.10.13.003-03: Technological design standards for pesticide stores

OST 107.12.028-2002: Occupational safety standards system. Flammable, combustible, chemically hazardous and harmful substances. Safety requirements for use, storage and transportation

OST 4 G0.033.200: Solders and fluxes for soldering, solder pastes. Brands, composition, properties and scope (edition 1-78)

PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys

PNST 369-2019: Mining engineering. Mining Explosion Systems. General technical requirements

POT R M-002-97: Intersectoral rules on labor protection in foundry

POT R M-003-97: Intersectoral rules on labor protection when performing forging and pressing

POT R M-004-97: Intersectoral labor protection regulations for the use of chemicals

POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals

POT R M-006-97: Intersectoral labor protection rules for cold metal processing

POT R M-007-98: Industry-Wide Occupational Safety and Health Requirements for Freight Loading/Offloading and Placement Operations

POT R M-009-99: Intersectoral labor protection regulations for the production and use of mercury

POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products

POT R M-011-2000: Intersectoral rules on labor protection in public catering

POT R M-013-2000: Industry-Wide Occupational Safety and Health Requirements for Chemical Cleaning and Washing

POT R M-014-2000: Intersectoral Occupational Safety Rules

POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations

POT R M-017-2001: Inter-Industry Occupational Safety and Health Regulations for Painting Operations

POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings

POT R M-022-2002: Intersectoral rules on labor protection during soldering and tinning of products

POT R M-025-2002: Intersectoral rules on labor protection during the operation of water supply and sewer facilities

POT R M-026-2003: Intersectoral rules on labor protection during the operation of gas facilities of organizations

POT R M-027-2003: Intersectoral rules on labor protection in road transport

POT R M-028-2003: Intersectoral labor protection regulations for plastics processing

POT R O-001-2002: Rules on labor protection for printing organizations

POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry

POT R O-112-001-95: Rules for labor protection during the operation of oil depots and gas stations

POT R O-112-002-98: Rules for labor protection during the operation of trunk oil pipelines

POT R O-13153-TsSh-877-02: Industry rules for labor protection during maintenance and repair of signaling, centralization and blocking devices on federal railway transport

POT R O-13153-TsT-926-02: Industry safety rules for railroad solid fuel bases

POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering

POT R O-14000-003-98: Rules for labor protection in the manufacture of boiler work and metal structures

POT R O-14000-007-98: Ordinance - Occupational Safety and Health for Material Storage

POT R O-200-01-95: Rules on labor protection in automobile transport

POT R O-29-002-94: Occupational Safety Rules for Publishers

POT R O-29-003-95: Occupational Safety Rules for Bookstores

POT R O-32-TsT-668-99: Rules for labor protection during maintenance and current repair of traction rolling stock and cranes on the railway

POT R O-45-001-94: Rules on labor protection in institutions and enterprises of the postal service and Rospechat

POT R O-45-003-2002: Occupational Safety and Health Requirements for Work at Closed-Circuit Radio Stations

POT R O-45-006-96: Rules for labor protection on overhead communication lines and wire broadcasting (radio)

POT R O-45-007-96: Labor protection rules when working at telephone exchanges and telegraphs

POT R O-95120-001-94: Rules of labor protection at retailers

POT R O-97300-016-98: Rules on labor protection. Beekeeping

POT R O-97300-03-95: Occupational Health and Safety Rules

POT R O-97300-04-95: Rules for labor protection during storage and processing of fruits and vegetables

POT R O-97300-05-95: Rules for labor protection in food concentrate and vegetable drying industries of the food industry

POT R O-97300-06-95: Rules for labor protection in the sugar industry of the food industry

POT R O-97300-07-95: Rules for labor protection in the production of alcohol and alcoholic beverages

POT R O-97300-08-96: Rules on labor protection in animal husbandry. Pig breeding

POT R O-97300-09-96: Rules on labor protection in animal husbandry. Sheep and goat breeding

POT R O-97300-10-96: Rules on labor protection in animal husbandry. Horse breeding

POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery

POT R O-97300-13-97: Occupational Safety and Health Requirements in Poultry Farming

POT R O-97300-14-97: Rules on labor protection in animal husbandry. Fur farming

POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport

POT RO-13153-TsM-933-03: Industry rules for labor protection in the economy of freight and commercial work on the federal railway transport

POT RO-14000-002-98: Ordinance on Safety Assurance for Process Equipment

POT RO-32-TsP-652-99: Rules for labor protection during the maintenance and repair of railway tracks and structures

POT RO-32-TsV-406-96: Rules for labor protection during the current repair and preparation for filling tanks for oil products and bunker-type cars for oil bitumen

POT RZhD 4100612-TsSh-074-2015: Rules for labor protection during maintenance and repair of signaling, centralization and blocking devices at Russian Railways

POT RZhD-4100612-TsP-TsDRP-022-2013: Rules for labor protection, environmental, industrial and fire safety during maintenance and repair of infrastructure facilities of the railway complex of JSC Russian Railways

PPBO-157-90: Fire Safety Regulations in the Timber Industry

RD 32-CSR-110/34-03: Guidance document. Labor protection during the operation of buildings and structures and the repair and construction work at railway facilities

RD EO 0069-97: Rules for the organization of maintenance and repair of systems and equipment of nuclear power plants

RD IATs 2.004-97: Passenger and freight elevators. Guidelines for testing insulation resistance, protective earth and loop phase-zero

RD ROSEK 02-008-96: Passenger, hospital and freight elevators. Nondestructive control. Main provisions

RD ROSEK-001-96: Hoisting machines. Metal structures. Ultrasonic control. Key Points

RD ROSEK-003-97: Hoisting machines. Magnetic particle control. Key Points

RD ROSEK-004-97: Hoisting machines. Capillary control. Key Points

RD ROSEK-006-97: Hoisting machines. Metal structures. Ultrasonic thickness gauging. Key Points

RD ROSEK-007-97: Hoisting machines. Eddy current control. Key Points

RD RosJeK 10-KM-03: Rules for the design, construction and manufacture of hoisting cranes

RD RosJeK 10-KR-01: Rules for the design, construction and manufacture of hoisting cranes

RD RosJeK 10-PV-02: Rules for the design, construction and manufacture of hoists (towers)

SDOS-07-2012: Methodological recommendations on the procedure for tightness control of technical devices and structures used and operated at hazardous production facilities

SDOS-11-2015: Guidelines on the procedure for conducting ultrasonic testing of metal structures of technical devices, buildings and structures

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation

SP 406.1325800.2018: Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation

SP 411.1325800.2018: Pipelines trunk and field for oil and gas. Tests before the delivery of constructed facilities

SP 414.1325800.2018: Fixed formwork. Design rules

ST CKBA 097-2019: Pipe fittings. Test methods for resistance to climatic external factors

ST CKBA 122-2018: Pipe fittings. Testing method for resistance to vibration

ST RK 986-2003: Road transport. State registration number plates with a retroreflective surface for motor vehicles and their trailers. Technical specifications

ST SSFZhT TsT 042-99: Certification system standard for the federal rail transport. Brake discs of engine carrying equipment applied for railways. Standard testing procedure.

ST SSFZhT TsT TsL TsV-137-2002: Rolling stock of mainline railways. Axle box rolling bearings. Standard testing method.

ST SSFZhT TsT-121-2001: Cylindrical cogged wheels of traction gearing of traction rolling stock of main railway lines. Standard testing method

ST SSFZhT TsT-131-2002: Bodies of locomotives and multiple units of trunk railway lines. Standard test procedure

ST TsKBA 083-2016: Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications

STO 64235108-002-2016: FOPS® surface runoff filters. General requirements

TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa

TU 24.08.1144-79: Car Decker 12U6

TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist

TU 3615-018-00217320-2006: Spherical tanks. Technical specifications

TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications

Customers Who Viewed This Item Also Viewed:

Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $102.96
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English
Price: $148.50
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Railway rails. General specifications.
Language: English
Price: $1,184.04
Technical regulations of Customs Union. On the safety of a personal protective equipment
Language: English
Price: $1,703.16
Technical regulations of Customs Union. On the safety of furniture products
Language: English
Price: $219.20
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English
Price: $972.28
Sulphur for industrial use. Sampling and preparation of samples
Language: English
Price: $44.55
Classification of automobile roads. General parameters and requirements
Language: English
Price: $87.30
Raw material and food-stuff. Method for determination of arsenic
Language: English
Price: $113.49
Nickel, nickel and copper-nickel alloys treated by pressure. Grades
Language: English
Price: $179.45
Stationary steam and hot-water boilers and heat recovery steam generators. Weld joints. Quality control. General requirements
Language: English
Price: $113.49
Jet fuels. Specifications
Language: English
Price: $86.13
Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
Language: English
Price: $224.71
Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
Language: English
Price: $422.53
Electrical apparatus for explosive gas atmospheres. Part 10. Classification of hazardous areas
Language: English
Price: $223.74

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!