imgalt

GOST 14710-78

ГОСТ 14710-78

Petroleum toluene

Толуол нефтяной

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)

The standard applies to petroleum toluene obtained in the process of catalytic reforming of gasoline fractions, as well as the pyrolysis of petroleum products and intended for the needs of the national economy as raw materials for organic synthesis, high-octane additives to motor fuels, solvent and for export.

Стандарт распространяется на нефтяной толуол, получаемый в процессе каталитического риформинга бензиновых фракций, а также при пиролизе нефтяных продуктов и предназначенный для нужд народного хозяйства в качестве сырья для органического синтеза, высокооктановых добавок к моторным топливам, растворителя и для экспорта.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 9/13/1978

SKU: RUSS16918

Price: $118.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.140 Paraffins, bituminous materials and other petroleum products »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.140 Paraffins, bituminous materials and other petroleum products »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B4 Petroleum products for industrial and domestic consumption » B44 Pyrolysis Products »

National Standards for OKSTU » OIL, PETROLEUM PRODUCTS, GAS » Oil products are different »

National Standards for OKSTU » ORGANIC SYNTHESIS PRODUCTS, SYNTHETIC DYES AND PETROCHOCOLES AND CHEMICAL PRODUCTS » Aromatic mononuclear hydrocarbons and their derivatives »


As a Replacement Of:

GOST 14710-69: Petroleum toluene

GOST 5.961-71: Toluene oil for nitration. Quality requirements for certified products

The Document References:

GOST 13380-81: Petroleum products. Method for determination of sulphur microadmixtures

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 19433-88: Dangerous goods. Classification and marking

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 2706.13-74: Benzene hydrocarbons and allied products. Method of determination of boiling range

GOST 2706.1-74: Benzene hydrocarbons and allied products. Method of determination of appearance and colour

GOST 2706.2-74: Benzene hydrocarbons and allied products. Chromatographic method of determination of main substance and impurities content in benzene, toluene and xylene

GOST 2706.3-74: Benzene hydrocarbons and allied products. Method of determination of sulphuric acid colour

GOST 2706.7-74: Benzene hydrocarbons and allied products. Method of determination of water extraction reaction

GOST 2706.8-74: Benzene hydrocarbons and allied products. Method of volatility determination

GOST 29131-91: Liquid chemical products. Measurement of colour in Hazen units (platinum-cobalt scale)

GOST 3900-85: Petroleum and petroleum products. Method for determination of density

GOST 6321-92: Engine fuels. Method for copper strip test

The Document is Referenced By:

GOST 1012-72: Aviation petrol

GOST 10200-2017: Electrode coal-tar pitch. Specifications

GOST 10200-83: Electrode coal-tar pitch

GOST 10306-75: Lubricating oils. Method of evaporation loss in dynamic conditions

GOST 1036-2014: Plastic lubricants. Method for determining of mechanical impurities.

GOST 1036-75: Plastic lubricants. Method of determination of mechanical impurities

GOST 1038-75: Coal-tar pitch. Specifications

GOST 10835-78: Shale oil for wood impregnation. Specifications

GOST 11010-84: Synthetic fat for leather industry. Specifications

GOST 11011-85: Petroleum and its products. Method for determination of fraction composition by apparatus APH-2

GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications

GOST 11126-2019: Coke-chemical raw materials for the production of carbon black. Technical specifications

GOST 11126-88: By-product coke raw materials for the production of commercial carbon

GOST 11244-2018: Petroleum. Method for determination of potential content of distillation and residue oils

GOST 11244-76: Petroleum. Method for the determination of distillation and residue oils potential content

GOST 11362-76: Petroleum products. Determination of base, acid and acidity by potentiometric titration

GOST 11507-78: Petroleum bitumen. Method for determination of brittle point

GOST 11802-66: Jet fuel. Method for determining thermal stability under static conditions

GOST 11802-88: Jet fuel method of test for determination of thermal-oxidative stability under static condition

GOST 11851-2018: Petroleum. Methods of paraffin determination

GOST 11851-85: Petroleum. Method of paraffin determination

GOST 11858-66: Crude petroleum and petroleum products. Method for determination of asphalt-tar content

GOST 12417-73: Mineral oils with additives and additives. Method for the determination of sulfated ash

GOST 12417-94: Petroleum products. Method for determination of sulphated ash

GOST 12707-77: Wash primers. Specifications

GOST 12856-84: Asbestos-steel sheets. Specifications

GOST 12856-96: Asbestos-steel sheets and gaskets made of them

GOST 13538-68: Additives and lubricating oils with additives. Method for determination of barium, calcium and zinc contents by complexonometric titration

GOST 14038-78: Shale oils. Method for determination of mechanical impurities and ash

GOST 14340.8-69: Enameled round winding wires. Method of the solvent-, oil- and water resistance test

GOST 1461-75: Petroleum and petroleum products. Method of ash test

GOST 14839.14-69: Industrial explosives. Method of mass determination of an explosive, of paper and of water insulating mixture per 100 gram of an explosive

GOST 1567-83: Motor fuel. Method for determination of existent gums

GOST 1567-97: Petroleum products. Motor gasoline and aviation fuels. Determination of gum content by jet evaporation method

GOST 15865-70: Insulating varnish MЛ-92. Specifications

GOST 15886-70: Mineral oils. Method for the determination of gum

GOST 15975-70: Silicon grease type KB-3/10Э. Specifications

GOST 16508-70: Insulating silicon varnishes. Specifications

GOST 17362-71: Mineral oils. Method of determination of saponification number

GOST 17751-79: Jet fuel. Method of test for thermal oxidation stability under dynamic conditions

GOST 17823.1-72: Wood chemical products. Method of acid number determination

GOST 17823.3-80: Wood chemical products. Method for determination of acid number by potentiometric titration

GOST 18613-88: Hydraulic fluid of grades 132-10 and 132-10Д. Specifications

GOST 19295-73: Lubricating greases. Method of mechanical stability determination

GOST 19537-83: Gun grease. Specifications

GOST 20458-2022: Grease Torsiol-55. Specifications

GOST 20458-89: Grease Torsiol-55. Specifications

GOST 20502-75: Oils and additives to them. Methods for determination of corrodibility

GOST 21150-2017: Litol-24 grease. Technical conditions

GOST 21150-87: Litol-24 grease

GOST 21534-76: Petroleum The determination of chloride salts content

GOST 21822-87: Petroleum fragile bitumens. Specifications

GOST 22054-76: Motor and aviation gasoline. Method for the evaluation of chemical stability

GOST 22385-82: Synthetic fatty acids. The spectrophotometric method of ester value determination

GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications

GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications

GOST 23510-79: UNIOL-2 Grease. Specifications

GOST 23846-79: Refrigerator cores for main railways of 1520 (1524) mm gauge. Paint coatings. Specifications

GOST 23955-80: Paint materials. Methods for determination of acid value

GOST 24037-80: Asbestos-polymer seal sheet materials. Method of test for resistance to liquids

GOST 2477-2014: Petroleum and petroleum products. Method for determination of water content

GOST 2477-65: Petroleum and petroleum products. Method for determination of water content

GOST 25219-87: Synthetic fatty acids. Methods for determination of fractional composition by gas chromatography

GOST 2770-74: Goal-tar oil for wood impregnation. Specifications

GOST 28184-89: Wood protective substances. Method for determining maximum effect on fungi of basidiomicetes class

GOST 28357-89: Coke-chemical products. Rapid method for determination of mass fraction of substances insoluble in toluene

GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications

GOST 28828-90: Benzenes. Method for determination of plumbum

GOST 32411-2013: Commercial explosives. Methods of determination of electric copacitance, density and resistance to water emulsions

GOST 3276-89: Lubricating grease ГОИ-54п. Specifications

GOST 33143-2014: Public roads. Bitumen of petroleum viscous for road building. The method of determining the fracture temperature by Fraas method

GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity

GOST 33-2016: Petroleum and petroleum products. Transparent and opaque liquids. Determination of kinematic and dynamic viscosity

GOST 33288-2015: Residual fuel oils. Test for straight-run. Method for determination of xylene equivalent

GOST 33700-2015: Crude oil. Determination of water content by distillation

GOST 33768-2015: Method for determination of kinematic viscosity and calculation of the dynamic viscosity of transparent and opaque liquids

GOST 33-82: Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity

GOST 4039-48: Benzenes. Method for determining the duration of the induction period

GOST 4039-88: Automobile gasolines. Methods of test for induction period

GOST 4117-78: TMT for industrial explosives. General requirements

GOST 4641-80: Сoal tars for road constructions

GOST 5985-2022: Petroleum products. Method for determination of acidity and acid number

GOST 5985-79: Petroleum products. Method for determination of acidity and acid number

GOST 6244-70: Electrical insulating impregnating varnishes БТ-987, БТ-988. Specifications

GOST 6321-92: Engine fuels. Method for copper strip test

GOST 6350-56: Lubricating oils of selective cleaning. Qualitative method of nitrobenzene content

GOST 6370-2018: Petroleum, petroleum products and additives. Method for determination of mechanical admixtures

GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures

GOST 6479-73: Lubricating greases. Method for determination of mechanical impurities content by hydrochloric acid decomposition

GOST 6667-75: Aviation gasoline. Period of stability method

GOST 7142-74: Lubricating greases. Methods for determination of oil separation

GOST 7143-73: Greases. Method for determination of ultimate strength and thermostrengthening

GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies

GOST 8018-70: Electrical insulating impregnating varnish ГФ-95. Specifications

GOST 8489-85: Motor fuel. Method for determination of existent gums (Budarov's)

GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state

GOST 9.080-77: Unified system of corrosion and ageing protection. Plastic greases. Accelerated method for determination of corrosion effect on metals

GOST 9.406-84: Unified system of corrosion and ageing protection. Organic-silicate coatings. Technical requirements and methods of tests

GOST 9356-75: Rubber hoses for gas welding and metal cutting. Specifications

GOST EN 12850-2013: Bitumens and bituminous binders. Determination of pH value of bituminous emulsions

GOST R 50378-92: Wood-chemical products. Method for determination of free resin acids

GOST R 51760-2001: Polymeric consumers packagings. General specifications

GOST R 52129-2003: Mineral powders for asphaltic concrete and organomineral mixtures. Specifications

GOST R 70536-2022: Coking products. Accelerated method for determination of the mass fraction of substances insoluble in toluene

GOST R 70708-2023: Pyrolysis liquid products. Pyrolysis light tar. Technical conditions

GOST R 8.1010-2022: State System for Ensuring Uniformity of Measurements (GSI). Mass fraction of water in oil-gas-water mixture. Requirements for measurement techniques (methods)

MI 2366-96: Recommendation. State system for ensuring uniformity of measurements. Hydrometers of oil type UDVN. Verification Method

MI 3028-2007: Recommendation. State system for ensuring uniformity of measurements. Viscometers of the Solartron mobrey limited firm. Graduation Method

MI 3029-2007: State system for ensuring uniformity of measurements. Viscometers of the firm "Sol-Mon Money Limited". Method of verification

MI 3120-2008: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Method of calibration

MI 3121-2008: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Calibration method

MI 3302-2010: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Calibration method

MUK 4.1.1206-03: Gas chromatographic determination of acrylonitrile, acetonitrile, dimethylformamide, diethylamine and triethylamine, diethylamine and triethylamine in water

MUK 4.1.637-96: Methodological guidelines for gas chromatographic determination of toluene in atmospheric air

MUK 4.1.640-96: Guidelines for the gas chromatographic determination of furfural and methylfurfural in atmospheric air

MUK 4.1.651-96: Methodological guidelines for gas chromatographic determination of toluene in water

MUK 4.1.658-96: Methodological guidelines for gas chromatographic determination of acrylonitrile in water

MVI 60-09: Methodology for measuring the anticorrosion characteristics of samples of mineral and flame-retardant (type OMTI) turbine oils

MVI 62-09: Methodology for measuring the mass fraction of sludge in samples of mineral energy oils

MVI 77-09: Methodology for measuring the mass fraction of dissolved sludge in samples of fire-resistant turbine oils of the OMTI type (OMTI)

ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads

ODM 218.7.001-2008: Recommendations on methods for determining the physicochemical properties of viscous oil road bitumen

ODM 218.7.002-2008: Guidelines for determining the needle penetration depth for viscous oil road bitumen

ODM 218.7.003-2008: Recommendations on the Fraas viscous oil road bitumen fragility temperature method

ODM OS-711-r: Method for determining the long-term strength (fracture strength under repeated tension) of organic binders

OST 92-1586-89: Marking paints. General requirements for selection, preparation and laying.

PNST 3-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of needle penetration

PNST 5-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of the Fraass breaking point

PNST 59-2015: Polishing compositions based nanodiamonds. Specifications

PNST 67-2015: Antifriction containing diamond concentrate. Specifications

R 3107938-0301-89: The list of categories of premises and structures of motor transport and auto repair enterprises according to explosion and fire hazard and classes of explosive and fire hazardous zones according to the rules for electrical installations

RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above

RD 153-34.1-43.204-2001: Petroleum-Based and Fireresistant Turbine Oils. Quantitative Method for the Determination of Anticorrosion Properties

RD 24.202.03-90: Weatherproof lacquer coating for oil and gas processing equipment. Technical requirements.

RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions

RD 34.20.131: Instructions for the protection of heat networks from electrochemical corrosion

RD 34.21.662-84: Typical instructions for painting metal poles of power lines using a rust converter

RD 34.43.102-96: Guidelines for Use of Petroleum-Based Turbine Oils

RD 39-3-944-83: Standard provision for a laboratory that performs oil analyzes during acceptance operations and produced water

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RTM 68-14.33-91: Manufacturing technology of plastic globes with a diameter of 210 mm

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

ST RK 1229-2003: Bitumens and bituminous binders. Method for determination a Fraas brittle point

ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions

STB 1517-2004: Plastic consumer packaging. General specifications

TU 6-02-575-75: Product 119-95 (formerly AM-2)

TU 6-10-1052-75: Enamel VL-515 red-brown

TU 6-10-1539-76: EP-572 Enamel of various colors

VRD 39-1.10-030-2001: Method for determining the quality of polymer adhesive internal coatings after exposure to corrosive environments by autoclave testing

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!