GOST 2016-86
ГОСТ 2016-86
|
|
Thread gauges. Specifications
Калибры резьбовые. Технические условия
Status: Effective. The limitation of effectiveness has been lifted: Decree of the State Standard No. 727 of 05.23.91
The standard applies to threaded gauges for monitoring external and internal cylindrical threads with diameters from 1 to 300 mm, with tolerances according to GOST 16093, GOST 4608, GOST 24834, GOST 11709, GOST 6357, GOST 9562, GOST 25096, OST NKTP 1261 and OST NKTP 1262 .
Стандарт распространяется на резьбовые калибры для контроля наружных и внутренних циллиндрических резьб диаметром от 1 до 300 мм, с допусками по ГОСТ 16093, ГОСТ 4608, ГОСТ 24834, ГОСТ 11709, ГОСТ 6357, ГОСТ 9562, ГОСТ 25096, ОСТ НКТП 1261 и ОСТ НКТП 1262.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
5/15/1986
SKU: RUSS16932
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G2 Industrial tools and accessories »
G28 Measuring tools »
National Standards for OKSTU »
TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS »
Calibers »
As a Replacement Of:
GOST 2016-68: Threaded gauges, plugs and rings. Technical requirements
The Document References:
GOST 10071-89: Gauges for trapezoidal tread. Tolerances
GOST 11709-81: Metric screw threads in the range 1-180 mm diameters for the parts in plastics. Profile, basic dimensions and tolerances
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 15623-84: Wooden cases for tools and accessories. Specifications
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 1908-88: Capacitor paper
GOST 24834-81: Basic norms of interchangeability. Metric screw thread. Transition fits
GOST 24997-2004: Gauges for metric thread. Tolerances
GOST 24997-81: Gauges for metric threads. Tolerances
GOST 25096-82: Basic norms of interchangeability. Butters thread. Tolerances
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 4608-81: Basic norms of interchangeability. Metric screw thread. Interference fits
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 5950-73: Bars and strips from a toolhouse steel alloy
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST 801-78: Bearing steel. Specifications
GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9562-81: Basic norms of interchangeability. Trapezoidal single-start screw thread. Tolerances
MI 1904-88: Threaded cylindrical gauges. Methods of control
OST NKTP 1261: Tolerances for inch threads according to OST NKTP 1260, 2nd accuracy class
OST NKTP 1261: Tolerances for inch threads according to OST NKTP 1260, 2nd accuracy class
OST NKTP 1262: Tolerances for inch threads according to OST NKTP 1260, 3rd accuracy class
OST NKTP 1262: Tolerances for inch threads according to OST NKTP 1260, 3rd accuracy class
The Document is Referenced By:
GOST 11897-94: Tripods for geodetic instruments. General technical requirements and methods of tests
GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications
GOST 1623-89: Gauges for inch thread with 55° corner profile. Tolerances
GOST 17756-72: Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17757-72: Threaded plug-gauges with inserts with incomplete form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17759-72: Threaded plug-gauges with full form of thread of diameters from 52 to 100 mm. Design and basic dimensions
GOST 17760-72: Threaded plug-gauges with incomplete form of thread of diameters from 52 to 100 mm. Design and basic dimensions
GOST 17761-72: Threaded plug-gauges with full of thread of diameter from 105 to 300 mm. Design and basic dimensions
GOST 17762-72: Threaded plug-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions
GOST 17763-72: Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17764-72: Threaded ring-gauges with incomplete form of thread of diameters from 2 to 100 mm. Design and basic dimensions
GOST 17765-72: Threaded ring-gauges with full-form of thread of diameters from 105 to 300 mm. Design and basic dimensions
GOST 17766-72: Threaded ring-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions
GOST 24939-81: Gauges for parallel threads. Types
GOST 24997-2004: Gauges for metric thread. Tolerances
GOST 26157-84: Taking lenses. General specifications
GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications
GOST 34296-2017: High-explosive torpedoes. Specifications
GOST 34648-2020: Fiber-reinforced thermosetting plastics pipes and pipeline parts. Methods for determining the resistance of pipes and fittings to short-term effects of internal hydraulic pressure
GOST 8762-75: Round threading diameter 40 mm for gas-mask with the gauges main dimensions and the tolerances
GOST 9731-79: Large capacity seamless steel gas-cylinders for operation pressure 4.5 MPa (250 kgf / cm2)
GOST R 55085-2012: Cylinders steel welded on pressure 1,6 MPа for liquefied hydrocarbon gas, used as motor fuel on car transport facility. Specifications
GOST R 55783-2013: High-explosive torpedoes. Technical conditions
GOST R 57885-2017: Glassfiber reinforced thermosetting pipes and parts of pipelines. Determination of dimensions
GOST R 58728-2019: Dumbbells sports variable and constant weight. Technical specifications
GOST R 8.677-2009: State system for ensuring the uniformity of measurements. Cylindrical thread gauges. Verification procedure
MI 2077-90: Micrometers with inserts
OST 108.033.01-86: mechanical stokers. Technical conditions.
RST RSFSR 655-81: Ice screws fishing. General technical conditions
TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.