GOST 21752-76
ГОСТ 21752-76
|
|
Man-machine system Control hand wheels and steering wheels General ergonomic requirements
Система "человек-машина". Маховики управления и штурвалы. Общие эргономические требования
Status: Effective. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 1993 dated 12/18/91
The standard applies to the control flywheels, steering wheels and steering wheels of the man-machine systems, designed to perform stepped switching and smooth dynamic adjustment with one or two hands, and establishes general ergonomic requirements for them.
Стандарт распространяется на маховики управления, штурвалы и рулевые колеса систем человек-машина, предназначенные для выполнения ступенчатых переключений и плавного динамического регулирования одной или двумя руками, и устанавливает к ним общие эргономические требования.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
4/27/1976
SKU: RUSS16940
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
8.1.2 Interchangeability and other design requirements »
Standards for pipe fittings (TPA) »
12. Standards for components for piping valves (TPA) »
12.1 Driving Devices »
12.1.1 Manual control »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
7 Psychophysiology and ergonomics »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.180 Ergonomics »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.180 Ergonomics »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »
The Document References:
GOST 12.2.003-74: Occupational safety standards system. Industrial equipment. General safety requirements
GOST 12.2.009-80: Metalworking machines
The Document is Referenced By:
GOST 10580-2006: Technological foundry equipment. General specifications
GOST 1077-79: Single-flame multi-purpose torches for oxy-acetylene welding, soldering and heating
GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal
GOST 12.2.009-99: Metal-working machines. General safety requirements
GOST 12.2.011-2012: Occupational safety standards system. Building, road and earth-moving machinery. General safety requirements
GOST 12.2.015-76: Occupational safety standards system. Machinery and equipment for glass industry. General safety requirements
GOST 12.2.015-93: Machines and equipment for glass industry. General safety requirements
GOST 12.2.016-81: Occupational safety standards system. Gas compressing equipment. General safety requirements
GOST 12.2.017.4-2003: Sheet-bending presses. Safety requirements
GOST 12.2.017-93: The forging and pressing equipment general safety requirements
GOST 12.2.026.0-2015: Woodworking machinery. Construction safety requirements
GOST 12.2.026.0-93: Woodworking equipment safety requirements for design
GOST 12.2.029-77: Occupational safety standards system. Holding devices. General safety requirements
GOST 12.2.037-78: Fire engineering. Safety requirements
GOST 12.2.040-79: Positive-displacement hydraulic drives and lubricating systems. General safety requirements for construction
GOST 12.2.042-2013: Occupational safety standards system. Machines and technological equipment for live-stock-raising and forage production. General safety requirements
GOST 12.2.042-91: Occupational safety standards system. Machines and technological equipment for livestock raising and forage production.
GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements
GOST 12.2.046-80: Occupational safety standards system. Equipment for foundry production. Safety requirements
GOST 12.2.048-80: Occupational safety standards system. Saws and flat knives sharpening machines. Safety requirements
GOST 12.2.055-81: Ferrous and nonferrous scrap and waste metal processing equipment
GOST 12.2.056-81: Occupational safety standards system. Electric and diesel locomotives for 1520 mm gauge. Safety requirements
GOST 12.2.088-2017: Standards system of labour safety. Ground equipment for well repair and realization. General safety requirements
GOST 12.2.088-83: Standards system of labor safety. Ground equipment for well repair and realization. Safety general requirements
GOST 12.2.094-83: Occupational safety standards system. Rolling equipment. General safety requirements
GOST 12.2.100-84: Occupational safety standards system. Machines and equipment for manufacturing clay and lime brick, ceramic and asbestos cement products. General safety requirements
GOST 12.2.100-97: Machines and equipment for manufacturing clau and lime brick, ceramic and asbestos cement products. General safety requirements
GOST 12.2.102-89: Machines and equipment for timber logging and floating, forestry tractors
GOST 12.2.106-85: Occupational safety standards system. Machines and mechanisms for mining of ore, non-ore and placer deposits. General hygienic requirements and methods of testing
GOST 12.2.113-2006: Crank presses. Safety requirements
GOST 12.2.115-2002: Operation safety standard system. Blow-out preventers. Safety requirements
GOST 12.2.115-86: Occupational safety standards system. Blowout preventer equipment. Safety requirements
GOST 12.2.116-2004: Three- and four-roller plate-bending machines. Safety requirements
GOST 12.2.118-2006: Shears. Safety requirements
GOST 12.2.123-90: Textile machinery
GOST 12.2.124-2013: Occupational safety standards system. Alimentary product equipment. General safety requirements
GOST 12.2.124-90: The food industry equipment
GOST 12.2.132-93: Occupational safety standards system. Oil Extraction Wellhead Equipment. General Safety Requirements
GOST 12.2.138-97: Industrial sewing machines
GOST 12.2.139-97: Agricultural machinery. Maintenance-production equipment. General safety requirements
GOST 12.2.231-2012: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods
GOST 12617-78: Ship's cargo winches. General specifications
GOST 18518-80: Automatic machines
GOST 21694-82: Welding mechanical equipment. General technical requirements
GOST 21694-94: Mechanical welding equipment
GOST 23000-78: Man-machine system. Control consoles. General ergonomic requirements
GOST 23308-78: Radiochemical hoods. General technical requirements
GOST 23309-78: Boxes radiation-protective. General technical requirements
GOST 24277-91: Stationary steam turbines for nuclear power plants. General specifications
GOST 24278-2016: Stationary steam turbines for electric generators of thermal electric stations. General technical requirements
GOST 24278-89: Stationary steam turbine plants for driving electric generators at thermal power stations
GOST 25804.4-83: Atomic power station technological processes control system equipment. General design-constructional requirements
GOST 28122-89: Grinding and polishing machine tools for stone working. General technical requirements and test methods
GOST 28541-90: Stone-sawing machines. General technical requirements and test methods
GOST 28969-91: Stationary steam low-capacity turbines
GOST 30443-97: Technological faundry equipment. Methods of control and estimation of safety
GOST 31.0101.01-89: Hand wheels, rotating levers, handles, and knobs
GOST 31206-2012: Woodworking equipment. Woodworking-transportable machines, semi-fixed, for individual use. General safety requirements
GOST 31489-2012: Garage equipment. Safety requirements and methods of inspection
GOST 31528-2012: Machines and equipment for munufacturing of sugar. Safety requirements
GOST 31529-2012: Machinery and equipment for bread baking industry. Safety requirements
GOST 31541-2012: Hammers. Safety requirements
GOST 31542-2012: Automatic and semi-automatic metal forming machines. Safety requirements
GOST 31593-2012: Machines and equipment for wood industrial low landings. Safety requirements. Control methods
GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements
GOST 31966-2012: Marine, lokomotive and industrial engines. General safety requirements
GOST 32216-2013: Special railway rolling stock. General technical requirements
GOST 32880-2014: Parking brake of the rolling-stock. Specifications
GOST 33257-2015: Pipeline valves. Methods of control and testing
GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34350-2017: Fire-fighting techniques. Fire extinguishing trucks. General technical requirements. Test methods
GOST 5191-79: Injector cutting torches for manual oxygen cutting
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 5875-77: Electric and hydraulic anchor gears. Types, main parameters, technical requirements and acceptance rules
GOST 9146-79: Machines. Controls. Direction of action
GOST 9891-76: Electric and hydraulic capstans. Types, main parameters, technical requirements and acceptance rules
GOST R 12.2.011-2003: Occupational safety standards system. Building, road, and earth-moving machinery. General safety requirements
GOST R 12.2.133-97: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods
GOST R 12.2.144-2005: Occupational safety standards system. Fire-fighting technics. Safety requirements. Test methods
GOST R 22.9.17-2014: Safety in emergencies. Pneumatic emergency and rescue tools. General technical requirements
GOST R 22.9.18-2014: Safety in emergencies. Hydraulic emergency and rescue tools. General technical requirements
GOST R 50612-93: Machines and equipment for manufacturing of sugar. Safety requirements
GOST R 50620-93: Machinery and equipment for bread baking industry. Safety requirements
GOST R 50680-94: Automatic water fire fighting systems. General technical requirements. Test methods.
GOST R 50761-95: Marine, locomotive and industrial diesels. General safety requirements
GOST R 50786-2012: Metal-cutting household machine-tools. Safety requirements
GOST R 50786-95: Metal-cutting machine tools household. Safety requirements
GOST R 50787-95: Woodworking equipment. Woodworking transportable machines semi-fixed, for individual use. General requirements of safety
GOST R 50804-95: Cosmonaut's habitable environments on board of manned spacecraft. General medicotechnical requirements
GOST R 50911-96: Agricultural machinery. Maintenance-production equipment. General safety requirements
GOST R 50969-96: Automatic gas fire extinguishing systems. General technical requirements. Test methods
GOST R 50983-96: Hydraulically operated portable emergency and rescue tools. General technical requirements
GOST R 51052-2002: Аutomatic water and foam fire extinguishing installations. Wet and dry systems alarm stations. General technical requirements. Test methods
GOST R 51101-2012: Metalworking and woodworking machines. Testing methods of compliance with safety requirements
GOST R 51101-97: Metalworking and woodworking machines small-size. Testing methods safety requirements
GOST R 51115-97: Fire equipment. Fire turntable combined monitors. General technical requirements. Test methods
GOST R 51151-98: Garage equipment. Safety requirements and methods of inspection
GOST R 51754-2001: Machines and equipment for wood industrial low landings. Safety requirements. Control methods
GOST R 52153-2003: Radiation-protective boxes. General specifications
GOST R 52283-2004: Fire-fighting centrifugal pumps. General technical requirements. Test methods
GOST R 52283-2019: Fire fighting equipment. Centrifugal fire pumps. General technical requirements. Test methods
GOST R 52284-2004: Fire aerial ladders. General technical requirements. Test methods
GOST R 52316-2005: Fire equipment. Thermal equipment trips. General technical requirements. Test methods
GOST R 52543-2006: Hydraulic drives. Safety requirements
GOST R 52869-2007: Pneumatic drives. Safety requirements
GOST R 52915-2008: Automatic and semi-automatic metalforming machines. Safety requirements
GOST R 53278-2009: Fire equipment. Fire valves. General technical requirements. Test methods
GOST R 53328-2009: Fire fighting technics. Fire extinguishing trucks. General technical requirements. Test methods
GOST R 53329-2009: Fire elevators. General technical requirements. Test methods
GOST R 53330-2009: Fire foam elevators. General technical requirements. Test methods
GOST R 53332-2009: Fire equipment. Fire motor pumps. Main parameters. General technical requirements. Methods of testing
GOST R 53332-2019: Fire fighting equipment. Motor-pumps fire. Main parameters. General technical requirements. Test methods
GOST R 53402-2009: Pipeline valves. Methods of control and testing
GOST R 53463-2009: Hammers. Safety requirements
GOST R 53481-2009: Lubrication systems. Safety requirements
GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements
GOST R 53978-2010: Special railway rolling stock. General technical requirements
GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements
GOST R 54431-2011: Metal-working machines. General safety requirements
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST R 55164-2012: Mining equipment. Movable mine compressor stations. Safety requirements and test methods
GOST R 55259-2012: Plants for artificial drying of hay. Test methods
GOST R 57052-2016: Mining equipment. Automatic fire fighting systems (for mining). General technical requirements and test methods
GOST R 57217-2016: Medical multi-place hyperbaric chambers with operating pressure 1, 0 MPa. General technical requirements
GOST R 57798-2017: Shipbuilding and marine structures. Mooring winches
GOST R 58383-2019: Fire fighting equipment. Caterpillar fire engines. Classification. General technical requirements. Test methods
GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications
GOST R 58619-2019: The main pipeline transport of oil and oil products. Tank equipment. Pontoons. General specifications
GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications
GOST R 58792-2019: Fire fighting equipment. Mobile compression foam generation systems. General technical requirements. Test methods
MR 1966-79: Ergonomic requirements for workplaces and controls of machines and mechanisms used in the development of ore, non-metallic and placer mineral deposits
MR 3212-85: Basic principles and methods of ergonomic workplace evaluation for sitting and standing
MU 4428-87: Guidelines for improving the state preventive sanitary inspection of the design of workshops and welding stations, the development of technological processes and equipment for welding production
NPB 101-2005*: Fire safety standards of the Republic of Belarus. The main fire trucks. General technical requirements. Test methods
NPB 159-97*: Fire fighting equipment. Fire monitors combined. General technical requirements. Test methods
NPB 163-97*: Fire fighting equipment. The main fire trucks. General technical requirements. Test methods
NPB 181-99: Fire water tenders , complete parts and accessories. Release from repair. General technical requirements. Test methods
NPB 192-2000: Fire engineering. Communnication and lighting truck. General technical requirements. Test methods
NPB 194-2000: Fire engineering. Smoke ejector truck. General technical requirements. Test methods
NPB 195-2000: Fire water tenders, complete parts and accessories. Release from repair. General technical requirements. Test methods
NPB 197-2001: Fire elevators. General technical requirements. Test methods
NPB 198-2001: Fire elevators, complete parts and accessories. Release from repair. General technical requirements. Test methods
NPB 307-2002: Fire fighting vehicles. Designation
NPB 312-2003: Fire engineering. Rescue vehicle. General technical requirements. Test methods
NPB 313-2002: Fire fighting equipment. Fire motor pumps. General technical requirements. Test methods
NPB 314-2003: Firefoam elevators. General technical requirements. Test methods
OST 36-100.2.03-84: Occupational safety standards system. Labour saving tools. Installation tools and devices. General safety and ergonomics requirements.
OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.
POT R M-006-97: Intersectoral labor protection rules for cold metal processing
POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals
RD 39-22-617-81: Uniform safety standards for the development of basic types of oil and gas equipment
RD 50-258-81: Guidelines. Unified system of instrument standards. Means of measurement and automation. Nomenclature and characteristics of ergonomic indicators
RM 4-51-90: Process automation systems. The principles of the layout of boards and control panels. Guide to PM 4-107-82
ST RK 1976-2010: Fire engineering. Tower ladders. General specification
ST RK 1980-2010: Fire engineering. Basic fire fighting trucks. General specification
ST RK 1981-2010: Fire engineering. Fire aerial ladders. General specification
ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions
STB 1208-2000: Construction and finishing machines. General safety requirements. Test methods
STB 1390-2003: Woodworking equipment. Compact moveable, transportable woodworking machines for individual use. General safety requirements
STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods
STB 2511-2017: The system of fire safety standards. Fire trucks main. General technical requirements. Test methods
TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.