ST TsKBA 006-2003
СТ ЦКБА 006-2003
|
|
Pipe fittings. Cryogenic fittings. General technical conditions
Арматура трубопроводная. Арматура криогенная. Общие технические условия
Status: Effective
The standard applies to shut-off, control, safety and check valves (closures) for a nominal pressure of no more than PN 400 for cryogenic gaseous and liquid media with temperatures ranging from 203 K (minus 70 degrees Celsius) to 4 K (minus 269 degrees Celsius). The standard can be used for certification. The standard operates in conjunction with the applicable standards and design documentation for specific types of valves. Mandatory requirements for product quality are set out in sections 4-7 and 9.
Стандарт распространяется на запорные, регулирующие, предохранительные и обратные клапаны (затворы) на номинальное давление не более PN 400 для криогенных газообразных и жидких сред с температурой от 203 К (минус 70 градусов Цельсия) до 4 К (минус 269 градусов Цельсия). Стандарт может быть использован для сертификации. Стандарт действует совместно с действующими стандартами и конструкторской документацией на конкретные виды арматуры. Обязательные требования к качеству продукции изложены в разделах 4-7 и 9.
Choose Language:
Format: Electronic (pdf/doc)
Approved: SJSC NPF TsKBA,
6/30/2003
SKU: RUSS169683
The Product is Contained in the Following Classifiers:
Organization Standards »
Standards NPF TsKBA »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.6 For cryogenic media »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.2 For gas industry »
As a Replacement Of:
OST 26-07-794-73: General purpose cryogenic pipeline fittings. General specifications.
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 12893-83: Single-seated, double-seated and cage control valves.
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23866-87: Single-seated, double-seated and cellular
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 24297-87: Input inspection of products. General provisions.
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 26304-84: Industrial pipeline valves supplied
GOST 26349-84: Tube connections and fittings. Nominal pressures. Series
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28338-89: Nominal bores (nominal sizes)
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST 30893.2-2002: Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications
GOST 3242-79: Welded joints
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9142-90: Boxes of corrugated board. General specifications
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility
GOST 9544-93: Pipeline cut-off valves
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 51232-98: Drinking water. General requirements for organization and quality control methods
GOST R 52720-2007: Pipeline valves. Terms and definitions
GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53672-2009: Pipeline valves. General safety requirements
GOST R ISO 3951-1-2007: Statistical methods. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by acceptance quality limit for lot-by-lot inspection for a single quality characteristic and a single AQL
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes
ST TsKBA 028-2007: Pipe fittings. Periodic testing. General requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
