ST TsKBA 010-2004

СТ ЦКБА 010-2004

Pipe fittings. Forgings, stampings and rolled products. Technical requirements

Арматура трубопроводная. Поковки, штамповки и заготовки из проката. Технические требования

Status: Effective

It applies to forgings, stampings, rolled blanks for pipe fittings installed at hazardous production facilities supervised by the Federal Service for Environmental, Technological and Nuclear Supervision, the Ministry of Defense of the Russian Federation and the general industrial fittings. Establishes groups of blanks and basic technical requirements for their acceptance and delivery. Does not apply to blanks, technical requirements for which are set by special standards or technical conditions, including blanks of the main design fasteners.

Распространяется на поковки, штамповки, заготовки из проката для трубопроводной арматуры, устанавливаемой на опасных производственных объектах, поднадзорных Федеральной службе по экологическому, технологическому и атомному надзору, Министерству обороны России (МО РФ) и арматуры общепромышленного назначения. Устанавливает группы заготовок и основные технические требования к их приемке и поставке. Не распространяется на заготовки, технические требования к которым установлены специальными стандартами или техническими условиями, в том числе на заготовки основного расчетного крепежа.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: SJSC NPF TsKBA, 12/28/2004

SKU: RUSS169688

Price: $684.48


The Product is Contained in the Following Classifiers:

Organization Standards » Standards NPF TsKBA »

Standards for pipe fittings (TPA) » 10. Production » 10.2 Billets (forgings, stampings, rolling, castings, etc.) »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.1 Metals »


As a Replacement Of:

OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.

The Document References:

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 12503-75: Steel Methods of ultrasonic control. General requirements

GOST 12560.1-78: Palladium-silver-cobalt alloys. Method of the determination of cobalt and silver

GOST 1497-84: Metals. Methods of tension test

GOST 1652.10-77: Copper-zinc alloys. Methods for the determination of aluminium

GOST 1652.11-77: Copper-zinc alloys. Methods for the determination of nickel

GOST 1652.12-77: Copper-zinc alloys. Methods for the determination of silicon

GOST 1652.13-77: Copper-zinc alloys. Methods for the determination of phosphorus

GOST 1652.1-77: Copper-zinc alloys. Methods for the determination of copper

GOST 1652.2-77: Copper-zinc alloys. Methods for the determination of lead

GOST 1652.3-77: Copper-zinc alloys. Methods for the determination of iron

GOST 1652.4-77: Copper-zinc alloys. Methods for the determination of manganese

GOST 1652.5-77: Copper-zinc alloys. Methods for the determination of tin

GOST 1652.6-77: Copper-zinc alloys. Methods for the determination of antimony

GOST 1652.7-77: Copper-zinc alloys. Methods for the determination of bismuth

GOST 1652.8-77: Copper-zinc alloys. Methods for the determination of arsenic

GOST 1652.9-77: Copper-zinc alloys. Methods for the determination of sulphur

GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 18175-78: Tin-free pressure-worked bronzes. Grades

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19281-2014: High strength rolled steel. General specification

GOST 19807-91: Wrought titanium and titanium alloys. Grades

GOST 20072-74: Heat-resistant steel

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing

GOST 22178-76: Titanium and titanium alloys sheets. Specifications

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.14-88: Carbon steel and unalloyed cast iron. Methods for determination of zirconium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 22848-77: Metals. Method for testing the impact strength at temperature from -100 up to -269 °C

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 26364-90: Ferritometers for austenitic steels. General specifications

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 380-2005: Common quality carbon steel. Grades

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6032-2017: Steel and corrosion resistant alloys. Test methods for resistance to intergranular corrosion

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 8.064-79: State system for ensuring the uniformity of measurements. The state special standard of unit of hardness on rockwell and super-rockwell scales

GOST 8.064-94: State system for ensuring the uniformity of measurements. State verification schedule for means measuring hardness on Rockwell and Super-Rockwell scales

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

GOST R 50.05.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of base materials (semi-products)

GOST R 50.05.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Magnetic particles examination

GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes

NP 104-18: Federal norms and rules in the field of the use of atomic energy "Welding and welding of equipment and pipelines of nuclear power plants"

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.

PB 03-585-03: Process Pipelines Design and Safe Operation Rules

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules

PNAE G-7-015-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Magnetic particle inspection

PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys

ST TsKBA 018-2007: Pipe fittings. Heat treatment of blanks (parts) of titanium and titanium alloys. Typical process

ST TsKBA 026-2005: Pipe fittings. Heat treatment of blanks from carbon and alloyed structural steels. Typical process

ST TsKBA 027-2006: Pipe fittings. Heat treatment of parts from non-ferrous alloys based on copper and nickel. Typical process

ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments

TU 14-3R-197-2001: Seamless pipes made of corrosion-resistant steel with high surface quality. Technical conditions

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST R 50.05.09-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control

PNAJe G-7-002-86: Standards for calculating the strength of equipment and pipelines of nuclear power plants

The Document is Referenced By:

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

ST TsKBA 003-2003: Pipe fittings. Enclosures and covers. Rationing static strength

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 005.2-2004: Pipe fittings. Metals used in the valve industry. Part 2. Reference data on the properties of materials

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys

ST TsKBA 017-2005: Pipe fittings. General technical conditions

ST TsKBA 018-2007: Pipe fittings. Heat treatment of blanks (parts) of titanium and titanium alloys. Typical process

ST TsKBA 027-2006: Pipe fittings. Heat treatment of parts from non-ferrous alloys based on copper and nickel. Typical process

ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments

ST TsKBA 054-2008: Pipe fittings. Construction materials for parts of pipeline valves operating in corrosive environments. Technical requirements

ST TsKBA 074-2009: Pipe fittings. Hubs and valve handles. Design, dimensions and specifications

ST TsKBA 084-2010: Elements of pipelines. Parts and assembly units of titanium alloys for nuclear power plant pipelines. General technical conditions

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

GOST 34610-2019: Pipe fittings. Electric drives. General specifications

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Hot-rolled sheet. Range
Language: English
Price: $72.27
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!