ST TsKBA 012-2005
СТ ЦКБА 012-2005
|
|
Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
Арматура трубопроводная. Шпильки, болты, гайки и шайбы для трубопроводной арматуры. Технические требования
Status: Effective
The standard applies to the main design fasteners for flange connections, seal assemblies, connectors and connections of the body parts of pipe fittings installed at the facilities supervised by Rostechnadzor, at the facilities of the Ministry of Defense of the Russian Federation, including ships of the Navy, for nuclear power plant grade 4 (AS), as well as at other sites. The standard does not apply to fasteners for valves AC 1, 2 and 3 classes and for valves of the Navy, equated to 1 and 2 classes AC. The standard establishes application parameters and technical requirements for studs, bolts, screws, nuts and washers for pipe fittings.
Стандарт распространяется на основной расчетный крепеж для фланцевых соединений, узлов уплотнения, разъемов и соединения корпусных деталей трубопроводной арматуры, устанавливаемой на объектах, поднадзорных Ростехнадзору, на объектах Министерства обороны РФ, в том числе на судах военно-морского флота, для 4 класса арматуры атомных станций (АС), а также на других объектах. Стандарт не распространяется на крепежные изделия для арматуры АС 1, 2 и 3 класса и для арматуры ВМФ, приравненной к 1 и 2 классам АС. Стандарт устанавливает параметры применения и технические требования к шпилькам, болтам, винтам, гайкам и шайбам для трубопроводной арматуры.
Choose Language:
Format: Electronic (pdf/doc)
Approved: SJSC NPF TsKBA,
8/10/2005
SKU: RUSS169690
The Product is Contained in the Following Classifiers:
Organization Standards »
Standards NPF TsKBA »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.2 Fasteners »
As a Replacement Of:
OST 26-07-262-77: Studs, bolts, screws, nuts for piping fittings. General technical requirements (restriction as per GOST 20700-75, GOST 1759-70, GOST 18126-72).
The Document References:
GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements
GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers
GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements
GOST 14034-74: Centre holes. Dimensions
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 1497-84: Metals. Methods of tension test
GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades
GOST 17474-80: Raised countersunk head screws, product grades A and B. Design and dimensions
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 1759.2-82: Bolts, screws, and studs. Surface imperfections and monitoring methods
GOST 1759.3-83: Nuts. Surface defects and methods of control
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 1759.5-87: Nuts. Mechanical properties and test methods
GOST 1759-70: Bolts, screws, pins and nuts
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 17769-83: Fastening details. Rules of acceptance
GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18160-72: Fasteners. Packing. Marking. Transportation and storage
GOST 18175-78: Tin-free pressure-worked bronzes. Grades
GOST 19281-2014: High strength rolled steel. General specification
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 20072-74: Heat-resistant steel
GOST 2060-2006: Brass rods. Specifications
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 22032-76: Studs with threaded end of 1d. Product grade B. Construction and dimensions
GOST 22034-76: Studs with threaded end of 1,25d. Product grade B. Construction and dimensions
GOST 22848-77: Metals. Method for testing the impact strength at temperature from -100 up to -269 °C
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 380-2005: Common quality carbon steel. Grades
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4543-71: Structural alloyed steel
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9064-75: Nuts for flanged connections with medium temperature 0 to 650 °C. Types and main dimensions
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 50.05.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of base materials (semi-products)
GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes
GOST R ISO 3269-2009: Fasteners. Acceptance inspection
OST 26-07-262-77: Studs, bolts, screws, nuts for piping fittings. General technical requirements (restriction as per GOST 20700-75, GOST 1759-70, GOST 18126-72).
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
PB 03-585-03: Process Pipelines Design and Safe Operation Rules
PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)
PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection
PNAJe G-7-002-86: Standards for calculating the strength of equipment and pipelines of nuclear power plants
RB-090-14: Safety guide on nuclear energy use
Safety Guide: Recommendations on arrangement and safe operation of process pipelines
Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 005.2-2004: Pipe fittings. Metals used in the valve industry. Part 2. Reference data on the properties of materials
ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts
The Document is Referenced By:
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
ST TsKBA 004-2003: Pipe fittings. Bolts and studs. Rationing static strength
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 062-2009: Pipe fittings. Rotary devices. Connecting dimensions
ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
