ST TsKBA 015-2005

СТ ЦКБА 015-2005

Pipe fittings. The program of quality control of fittings of nuclear power plants

Арматура трубопроводная. Программа контроля качества арматуры атомных станций

Status: Effective

The standard applies to the fittings of nuclear power plants for various purposes and establishes methods, scope of control and quality assessment criteria for the manufacture and acceptance of blanks from rolled products, forgings or stampings, castings, parts, welding (surfacing) materials, assembly units and pipeline fittings.

Стандарт распространяется на арматуру атомных станций (АС) различного назначения и устанавливает методы, объем контроля и критерии оценки качества при изготовлении и приемке заготовок из проката, поковок или штамповок, отливок, деталей, сварочных (наплавочных) материалов, сборочных единиц и изделий трубопроводной арматуры.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: SJSC NPF TsKBA, 2/7/2005

SKU: RUSS169693


Price: request_a_quote

The Product is Contained in the Following Classifiers:

Organization Standards » Standards NPF TsKBA »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.1 For energy » 3.1.1 For nuclear power »

Standards for pipe fittings (TPA) » 1. Fundamental standards for injection molding machines » 1.3 Reliability and safety »


As a Replacement Of:

OST 26-07-2065-85: Quality control program for nuclear thermal power plant special fittings.

The Document References:

GOST 10006-80: Metal pipes

GOST 10051-75: Metal covered electrodes for manual arc surfacing of upper layers with special properties types

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 10460-72: Horizontal copy-milling machines. Basic dimensions

GOST 10597-87: Painting brishes. Specifications

GOST 10877-76: Preservative oil K-17

GOST 11371-78: Washers. Specifications

GOST 13463-77: Tab lock washers. Design and dimensions

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 1497-84: Metals. Methods of tension test

GOST 15140-78: Paintwork materials. Methods for determination of adhesion

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 18123-82: Washers

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 19040-81: Metal tubes. Method of tension test at high temperatures

GOST 19906-74: Sodium nitrite technical. Technical conditions

GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 2246-70: Welding steel wire. Specifications

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage

GOST 23479-79: Non-destructive testing. Optic methods. General requirements

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6032-2017: Steel and corrosion resistant alloys. Test methods for resistance to intergranular corrosion

GOST 6507-90: Micrometers. Specifications

GOST 6958-78: Enlarged washers. Product grades A and C. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.302-79: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coating. Rules of acceptance and methods of control

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.402-80: Metal surface preparation for painting

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9065-75: Washers for flanged connection with medium temperature 0 to 650 °C. Types and general sizes

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

GOST R 50.05.01-2018: Conformity assessment for the nuclear power use nuclear energy. Conformity assessment in the form of examination. Unified procedures. Leak tightness examination by gas and liquid methods

GOST R 50.05.02-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of welded joints and cladded surfaces

GOST R 50.05.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of base materials (semi-products)

GOST R 50.05.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Magnetic particles examination

GOST R 50.05.07-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Radiographic examination

OST 26-07-2065-85: Quality control program for nuclear thermal power plant special fittings.

PNAE G-7-003-87: Certification Requirements for Welders of Equipment and Piping for Nuclear Power Plants

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules

PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)

PNAE G-7-015-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Magnetic particle inspection

PNAE G-7-016-89: Standardized methods of control of basic materials (semifinished products), welded joints and cladding of equipment and of pipelines of NPP. Visual and a measuring control

PNAE G-7-017-89: Unified technique of inspection of base materials (semifinished products), welded joints and deposits of equipment and pipelines of atomic power plants. Ultrasonic inspection

PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection

PNAE G-7-019-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Leak tightness control. Gas and liquid methods

PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control

PNAE G-7-030-91: Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part II. Weld examination

PNAJe G-7-002-86: Standards for calculating the strength of equipment and pipelines of nuclear power plants

RB 089-14: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Visual and measuring testing.

RB-090-14: Safety guide on nuclear energy use

RD 2730.300.06-98: Fixtures for nuclear plants and thermal stations. Cladding of sealing surfaces. Specifications

RD 3-3-85: Model provision of procedure examination rules, regulations and safety instructions in the nuclear industry managing directors and professionals.

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys

ST TsKBA 026-2005: Pipe fittings. Heat treatment of blanks from carbon and alloyed structural steels. Typical process

ST TsKBA 035-2007: Pipe fittings. Designation of design documentation and specifications. Completeness CD

ST TsKBA 035-2017: Pipeline fittings. Designation of the design documentation and technical specifications. Design documentation scope

The Document is Referenced By:

ST TsKBA 035-2007: Pipe fittings. Designation of design documentation and specifications. Completeness CD

ST TsKBA 035-2017: Pipeline fittings. Designation of the design documentation and technical specifications. Design documentation scope

ST TsKBA 078-2011: Pipe fittings. Production certification. Weld Technology

ST TsKBA 084-2010: Elements of pipelines. Parts and assembly units of titanium alloys for nuclear power plant pipelines. General technical conditions

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!