imgalt

ST TsKBA 021-2004

СТ ЦКБА 021-2004

Painting and conservation of pipeline valves and drive devices for it supplied for nuclear power plants. Typical technological instructions for cleanliness, dyeing and conservation

Окрашивание и консервация трубопроводной арматуры и приводных устройств к ней, поставляемой для атомных станций. Типовая технологическая инструкция по чистоте, окрашиванию и консервации

Status: Effective

The standard is applied to pipeline valves and actuators for it supplied for nuclear power plants to the domestic market and for export, and establishes requirements for painting and preserving valves, methods of preparing the surface of the valve before painting and conservation, the brand of paints, the required number of layers and their technology application to ensure guaranteed periods of corrosion protection during transportation, storage and operation.

Стандарт применяется для трубопроводной арматуры и приводных устройств к ней, поставляемых для атомных станций на внутренний рынок и на экспорт, и устанавливает требования к окрашиванию и консервации арматуры, способы подготовки поверхности арматуры перед окрашиванием и консервацией, марки лакокрасочных материалов, необходимое количество слоев и технологию их нанесения для обеспечения гарантированных сроков антикоррозионной защиты при транспортировании, хранении и эксплуатации.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: SJSC NPF TsKBA, 4/12/2004

SKU: RUSS169699


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Organization Standards » Standards NPF TsKBA »

Standards for pipe fittings (TPA) » 10. Production » 10.7 Coatings »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.1 For energy » 3.1.1 For nuclear power »


The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 10597-87: Painting brishes. Specifications

GOST 10877-76: Preservative oil K-17

GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.4.004-74: Filtering protective mask RPG-67

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 12.4.028-76: Respirators шб-1 "lepestok"

GOST 12.4.099-80: Women's overalls for protection against non-toxic substances, mechanical damage and general industrial contamination

GOST 12.4.100-80: Man's overalls for protection against non-toxic dust, mechanical effects and general industrial contaminations. Specifications

GOST 12.4.121-2015: Occupational safety standards system. Respiratory protective devices. Filtering gas мasks. General technical specifications

GOST 12.4.137-2001: Special shoes with leather upper for the protection from oil, oil products, acids, alkali non-toxic and explosive dangerous dust. Technical specifications.

GOST 12.4.296-2015: Occupational safety standards system. Respiratory protective devices. Filtering gas half мasks. General specifications

GOST 14296-78: Grease ВНИИ НП-279. Specifications

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15171-78: Additive АКОР-1. Specifications

GOST 16508-70: Insulating silicon varnishes. Specifications

GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises

GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises

GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications

GOST 19007-73: Paintwork materials. Method for determination of drying time and degree

GOST 20010-93: Industrial rubber gloves

GOST 23143-83: Enamels ЭП-773. Specifications

GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications

GOST 29298-2005: Cotton and mixed domestic fabrics. General specifications

GOST 3134-78: White spirit

GOST 3956-76: Silica gel technical. Technical conditions

GOST 4644-75: Graded cotton textile production waste. Specifications

GOST 5494-95: Pigmentary aluminium. Specifications

GOST 5530-2004: Packing and technical fabrics made of bast fibres. General specifications

GOST 6507-90: Micrometers. Specifications

GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications

GOST 8505-80: Nefras-C 50/170. Specifications

GOST 8984-75: Silica gel indicator. Technical conditions

GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications

GOST 9640-85: Enamels ЭП-51. Specifications

The Document is Referenced By:

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 34610-2019: Pipe fittings. Electric drives. General specifications

GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications

ST TsKBA 022-2005: General industrial pipeline valves supplied to nuclear power plants. General technical requirements

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English
Price: $79.00
imgalt
Armour clothes. Classification and general technical requirements
Language: English
Price: $189.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $169.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Hotels design
Language: English
Price: $1,698.24
imgalt
Railroad rails. General specifications
Language: English
Price: $1,813.00
imgalt
Potassium chloride
Language: English
Price: $159.00
imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!