ST TsKBA 037-2006

СТ ЦКБА 037-2006

Pipe fittings. Packing glands. Construction, main dimensions and technical requirements

Арматура трубопроводная. Узлы сальниковые. Конструкция, основные размеры и технические требования

Status: Effective

The standard applies to the gland assemblies of pipe fittings operating at pressures up to 40 MPa and temperatures from minus 80 to plus 565 degrees Celsius, and establishes the design, basic dimensions and technical requirements. The standard does not apply to self-sealing oil seals, oil-lubricated oil seals and oil seals of adjustable valves controlled by pneumatic membrane-spring actuators according to GOST 13373. The design and dimensions of the oil seals based on thermally expanded graphite - according to ST TsKBA-Soyuz-SILUR-019-2006. The design and dimensions of the liquid metal stem seals of the valves for steam and water environments - according to the RT documentation RTM 26-07-252. Recommendations for the use of liquid metal freezing seals - according to РД РТМ 26-07-234.

Стандарт распространяется на сальниковые узлы трубопроводной арматуры, работающей при давлении до 40 МПа и температуре от минус 80 до плюс 565 градусов Цельсия, и устанавливает конструкцию, основные размеры и технические требования. Стандарт не распространяется на самоуплотняющиеся сальники, сальники с принудительной смазкой и сальники регулируемой арматуры, управляемой механизмами исполнительными пневматическими мембранно-пружинными по ГОСТ 13373. Конструкция и размеры сальниковых узлов на основе терморасширенного графита - по СТ ЦКБА-СОЮЗ-СИЛУР-019-2006. Конструкция и размеры жидкометаллических уплотнений штоков задвижек для паровых и водяных сред - по РД РТМ 26-07-252. Рекомендации по применению жидкометаллических замораживающих уплотнений - по РД РТМ 26-07-234.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: SJSC NPF TsKBA, 12/28/2006

SKU: RUSS169716

Price: request_a_quote

The Product is Contained in the Following Classifiers:

Organization Standards » Standards NPF TsKBA »

Standards for pipe fittings (TPA) » 13. Standards for basic components and parts of injection molding machines » 13.5 Packing units »

As a Replacement Of:

RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 11371-78: Washers. Specifications

GOST 1215-79: Malleable iron castings

GOST 13373-67: Actuating pneumatic diaphragm-spring straight motion mechanisms SSI. Types. Basic parameters and dimensions

GOST 1412-85: Flakish graphite cast iron

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 18175-78: Tin-free pressure-worked bronzes. Grades

GOST 22032-76: Studs with threaded end of 1d. Product grade B. Construction and dimensions

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 3033-79: Eye bolts. Design and dimensions

GOST 380-2005: Common quality carbon steel. Grades

GOST 5152-84: Gland Packing Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions

GOST 7802-81: Increased cup head square shoulder bolts, product grade C. Construction and dimensions

GOST 977-88: Steel castings. General specifications

GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods

GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C

GOST R ISO 6157-1-2009: Fasteners. Surface discontinuities. Part 1. Bolts, screws and studs for general requirements

RD 26-07-234-89: Pipe fittings. Liquid metal freezing seals. Recommendations for use

RD RTM 26-07-252-82: Liquid metal rod seals for steam and water fluids

ST TsKBA 019-2012: Pipe fittings. Thermally expanded graphite based seals. General technical requirements

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 064-2008: Pipe fittings. Fluoroplast-4 gaskets and composite materials based on it. Sizes and technical requirements

The Document is Referenced By:

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

ST TsKBA 002-2003: Pipe fittings. Latches. The method of force calculation

ST TsKBA 008-2011: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage

ST TsKBA 008-2014: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage

ST TsKBA 019-2012: Pipe fittings. Thermally expanded graphite based seals. General technical requirements

ST TsKBA 082-2009: Pipe fittings. Input control

ST TsKBA 086-2010: Pipe fittings. Specifications and characteristics for power calculations of fittings

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

ST TsKBA 110-2013: Pipe fittings. Gland with a fusible metal seal. Designs and main dimensions. Technical requirements

ST TsKBA 115-2015: Pipe fittings. Ball valves. The method of force calculation

ST TsKBA 118-2018: Pipe fittings. Stuffing box valves with screw-in spindle (spool and spindle are not rigidly connected). Force calculation technique

ST TsKBA 119-2018: Pipe fittings. Stuffing box valves with screw-in spindle (spool and spindle are rigidly connected). Force calculation technique

ST TsKBA 120-2018: Pipe fittings. Valves stop valves and stuffing boxes with non-rotating spindle. The method of force calculation

ST TsKBA 121-2018: Pipe fittings. Shut-off valves and stuffing valves with screw-in spindle and non-rotating stem. The method of force calculation

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY! is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!