ST TsKBA 089-2010
СТ ЦКБА 089-2010
|
|
Pipe fittings. Welding defects castings. Technical requirements
Арматура трубопроводная. Заварка дефектов отливок. Технические требования
Status: Effective - Introduced for the first time
The standard applies to pipeline valves: hazardous production facilities, supervised by Rostekhnadzor, general industrial use, operating in various industrial environments, other purposes (except for NPP, Sudprom) and establishes requirements for welding defects in cast parts from carbon and alloyed steel, high-alloyed steels and alloys, cast iron and titanium alloys and establishes the procedure for the preparation and correction of defects in cast parts, as well as requirements for methods of welding defects in castings, contains basic overt technical requirements for the cutting and welding of defective areas, heat treatment after welding, quality control of welded sections (welding places) and design of technical documentation for welding.
Стандарт распространяется на трубопроводную арматуру: опасных производственных объектов, поднадзорных Ростехнадзору, общепромышленного применения, работающей в различных промышленных средах, другого назначения (кроме АЭУ, судпрома) и устанавливает требования к заварке дефектов литых деталей из углеродистых и легированных сталей, высоколегированных сталей и сплавов, чугуна и титановых сплавов и устанавливает порядок подготовки и исправления дефектов литых деталей, а также требования к способам заварки дефектов отливок, содержит основные технические требования к разделке и заварке дефектных участков, термической обработке после заварки, контролю качества заваренных участков (мест заварки) и оформлению технической документаций на заварку.
Choose Language:
Format: Electronic (pdf/doc)
Approved: SJSC NPF TsKBA,
7/20/2010
SKU: RUSS169768
The Product is Contained in the Following Classifiers:
Organization Standards »
Standards NPF TsKBA »
Standards for pipe fittings (TPA) »
10. Production »
10.2 Billets (forgings, stampings, rolling, castings, etc.) »
Standards for pipe fittings (TPA) »
10. Production »
10.3 Welding »
The Document References:
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 2.314-68: Unified system for design documentation. Instructions for marking and stamping articles
GOST 201-76: Trisodium phosphate. Technical conditions
GOST 2246-70: Welding steel wire. Specifications
GOST 2263-79: Sodium hydroxide for industrial use. Specifications
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 24297-87: Input inspection of products. General provisions.
GOST 2603-79: Reagents. Acetone. Specifications
GOST 27265-87: Titanium and titanium-alloy filling wire
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3134-78: White spirit
GOST 3242-79: Welded joints
GOST 3647-80: Abrasives. Grain sizing. Graininess and fractions. Test methods
GOST 380-2005: Common quality carbon steel. Grades
GOST 5100-85: Soda ash technical. Technical conditions
GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications
GOST 5583-78: Industrial and medical gaseous oxygen
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8050-85: Carbon dioxide,
GOST 8429-77: Borax. Technical conditions
GOST 8433-81: Auxiliary substances OП-7 and OП-10. Specifications
GOST 859-2001: Copper. Grades
GOST 859-78: Copper. Grades
GOST 9087-81: Welding melted fluxes
GOST 9389-75: Carbon steel spring wire
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 977-88: Steel castings. General specifications
GOST R 51232-98: Drinking water. General requirements for organization and quality control methods
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-585-03: Process Pipelines Design and Safe Operation Rules
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
POT R M-020-2001: Industry-Wide Occupational Safety and Health Requirements for Electric Welding and Gas Welding Operations
POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering
PPB 01-03: On Approval Of Fire Safety Standards In The Russian Federation
RD 03-19-2007: Regulations on the organization of work on the training and certification of specialists of organizations supervised by the Federal Service for Environmental, Technological and Atomic Supervision
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 03-613-03: Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities
RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
SP 1009-73: Sanitary regulations for welding, weld deposition and metal cutting
ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions
ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements
ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements
The Document is Referenced By:
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
|
Customers Who Viewed This Item Also Viewed:
 |
Special railway rolling stok. Dynamic and strength testing procedures
Language: English |
Blanks for marine shafts and rudder stocks. Specifications
Language: English |
Tempered glass. Specifications.
Language: English |
Glass with low emissivity hard coating. Specifications.
Language: English |
Glass laminated. Specifications.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
