GOST 5915-70

ГОСТ 5915-70

Hexagon nuts, product grade B. Construction and dimensions

Гайки шестигранные класса точности в. Конструкция и размеры

Status: Not effective - Canceled in the Russian Federation. Discontinued use on the territory of the Russian Federation completely. Information about registration 945-st dated July 21, 2015 (the official website of Rosstandart); IUS 1-2017

The standard applies to hexagon nuts of accuracy class B with a thread diameter of 1.6 to 48 mm.

Стандарт распространяется на шестигранные гайки класса точности В с диаметром резьбы от 1,6 до 48 мм.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 8

Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR, 2/18/1970

SKU: RUSS16994

Price: $22.77

English keywords: the nuts;

National keywords: гайки;


The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.20 Nuts »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.20 Nuts »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G3 Fasteners for general engineering applications » G33 Nuts »


As a Replacement Of:

GOST 5915-62: Hex nuts (normal accuracy). Dimensions

The Document References:

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation

GOST 1759.3-83: Nuts. Surface defects and methods of control

GOST 1759.5-87: Nuts. Mechanical properties and test methods

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods

GOST R 52628-2006: Nuts. Mechanical properties and test methods

The Document is Referenced By:

ATK 24.201.17-90: Stirrers. Types, parameters, design, main dimensions and technical requirements

ATK 24.202.08-90: Ball valve valve four-flow plates for column type devices. Construction and main dimensions

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

ATK 26-02-1-89: Direct-flow valve plates for column-type devices. Options. Construction and main dimensions

ATK 26-02-2-89: Four-flow straight valve plates for column-type apparatus. Options. Construction and main dimensions

ATK 26-02-3-89: Mesh plates with baffle elements for column type devices. Options. Construction and main dimensions

ATK 26-02-4-89: Trapezoid valve plates for column type apparatus. Parameters, design and main dimensions

GOST 10161-83: Cast iron enamelled shower basins. Types and principal dimensions

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10210-83: Pneumatic impact nut wrenches. Basic parameters

GOST 10403-80: Constructional steel trowels. Technical requirements

GOST 11127-78: Wooden drums for wire ropes. Specifications

GOST 1154-73: Enamelled cast iron bathtubs. Types and basic dimensions

GOST 1154-80: Enamelled cast iron bathtubs. Types and principal dimensions

GOST 12393-2013: Line fittings for overhead system of railways. General common requirements

GOST 12393-77: Fittings for overhead system of electric railways. General specifications

GOST 13154-67: Floating clamps for machine retaining devices. Design and dimensions

GOST 14631-69: Steel enameled sinks

GOST 14911-82: Steel pipeline parts. Pipe movable supports. Types and main dimensions

GOST 16438-70: Sand and metal moulds for making of fluidity of metals tests

GOST 16549-71: Sleeve type iron plug valves with gland and blind flange for drainage for Py <= 10 kgf/sq.cm

GOST 16561-76: Metal accessories for wood containers. Specifications

GOST 17584-72: Cast iron joining rings and fittings for asbestos cement pressure pipes

GOST 18297-96: Pig-iron enameled sanitary devices. Technical conditions

GOST 18969-73: Accumulators and Lead batteriesed for railway cars

GOST 19254-81: Support clamps for open distribution devices. Technical conditions

GOST 19306-73: Centrifugal moulds with threaded shank and centrifugal locks. Construction and dimensions

GOST 19306-98: Centrifugal moulds with threaded shank and centrifugal locks. Construction and dimensions

GOST 19308-98: Centrifugal moulds with flange and centrifugal locks. Construction and dimensions

GOST 19309-98: Centrifugal moulds with flange, inserts and centrifugal locks. Construction and dimensions

GOST 19354-74: Shaft line flange joints. Construction and dimensions

GOST 19804.6-83: Reinforced-concrete round hole built-up piles and tubular piles. Structure and dimensions

GOST 2.106-96: Unified system for design documentation. Text documents

GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics

GOST 21029-75: Aluminum barrels for chemical products

GOST 21096-75: Window steel panels of hot-rolled and roll-formed sections for industrial buildings

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 21164-75: Globe reducers type Chg. The main parameters, overall and mounting dimensions

GOST 21165-75: Reducers, globoid, blown, of type C. The main parameters, overall and mounting dimensions

GOST 22333-93: Bolt lifting screw for wooden cast patterns. Design

GOST 23120-2016: Stairways, marching, platforms and fences of steel. Specification

GOST 23695-2016: Enamelled steel sanitary appliances. Specifications

GOST 23695-94: Enamelled steel sanitary appliances. Specifications

GOST 24199-80: Regulated brackets. Design

GOST 24379.0-2012: Foundation bolts. General specifications

GOST 24379.0-80: Foundation bolts. General specification

GOST 24379.1-2012: Foundation bolts. Structure and dimensions

GOST 24379.1-80: Foundation bolts. Structure and dimensions

GOST 24741-2016: Joint for connection of crane rails to steel crane girders. Specifications

GOST 2593-82: Coupling air brake hoses for railway rolling stock. Specifications

GOST 26230-88: Automatic lines for final forming of nuts. Output range

GOST 26258-87: Counterbores designed for working bearing surfaces under fastenings. Specifications

GOST 26429-85: Steel structures of suspended transport tracks. Specifications

GOST 26455-97: Semifixed disk couplings. Parameters, design and dimensions

GOST 26505-85: Tools for cold-forming machines. Gutters Construction and dimensions

GOST 26506-85: Tools for cold-forming machines. Dies for cutting ofnut blanks. Construction and dimensions

GOST 26507-85: Tools for cold-forming machines. 1 St station dies. Construction and dimensions

GOST 26508-85: Tools for cold-forming machines. 2Nd station dies. Construction and dimensions

GOST 26509-85: Tools for cold-forming machines. 3rd station dies. Construction and dimensions

GOST 26510-85: Tools for cold-forming machines. 4Th station dies. Construction and dimensions

GOST 26511-85: Tools for cold-forming machines. 5Th station dies. Construction and dimensions

GOST 26512-85: Tools for cold-forming machines. 1St station punches. Construction and dimensions

GOST 26513-85: Tools for cold-forming machines. 2-D station punches. Construction and dimensions

GOST 26514-85: Tools for cold-forming machines. 3rd station punches. Construction and dimensions

GOST 26515-85: Tools for cold-forming machines. 4Th station punches. Construction and dimensions

GOST 26516-85: Tools for cold-forming machines. 5Th station punches. Construction and dimensions

GOST 26526-85: Vacuum equipment. Flanger joint for high vacuum system. Design, dimensions and technical requirements

GOST 26804-2012: Metal road safety barriers. Specifications

GOST 2724-78: Staples for overhead power lines. Technical conditions

GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications

GOST 28456-90: Expansive dowels for building. General specifications

GOST 28759.5-90: Flanges of vessels and apparatuses

GOST 29191-91: Electromagnetic compatibility of technical means. Electrostatic discharge immunity. Technical requirements and test methods

GOST 3050-77: Hose joints for flexible hoses

GOST 30630.1.6-2013: Test methods for resistance to mechanical external influencing factors for machines, instruments and other industrial products. Tests of electrical terminals, fittings and other connecting parts to the impact of bending, torque, tensile and compressive forces

GOST 31559-2012: Anchor supports. General pecifications

GOST 31560-2012: Metal frame yield supports. Arch support. General specifications

GOST 31610.0-2012: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements

GOST 31610.0-2014: Explosive atmospheres. Part 0. Equipment. General requirements

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements

GOST 32885-2014: Automatic coupler model SA-3 and its components. Design and dimensions

GOST 3690-70: Accessories for vertical cylindrical storage tank for petroleum products. Feed nozzles

GOST 3726-67: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps

GOST 4261-82: Connection clamps. Specification

GOST 4609-49: Filling-draining equipment for flammable and highly inflammable liquids. Single filling-draining standpipe with manual pump

GOST 4610-49: Filling-draining equipment for flammable and highly inflammable liquids. Powered single filling-draining standpipe

GOST 4621-79: Accessories for horizontal cylindrical storage tanks for petroleum products. Receiving and distributing sleeve. Technical requirements

GOST 4630-71: Accessories for vertical cylindrical storage tank for petroleum products. Safety valves, welded

GOST 4860.1-83: Glands for for electric cables and wires

GOST 5044-79: Thin-walled steel drums for chemical products

GOST 5151-79: Wooden drums for electrical cables and wires. Specifications

GOST 7092-79: Steel pins for insulators of overhead communication lines and radio communication. Specification

GOST 7623-75: Outdoor drainage pipes

GOST 8144-73: Fishplate bolts for narrow gauge

GOST 8838-81: Shaftline conical joints. Types, construction and dimensions

GOST 9074-85: Joined by pins slot cloths

GOST ISO 4759-1-2015: Tolerances for fasteners. Part 1. Иolts, screws, studs and nuts. Product grades A, B and C

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51748-2001: Metal frame yield supports. Arch support. General specifications

GOST R 51911-2002: Mechanical environment stability test methods for machines, instruments and other industrial products. Bending, torn, tensile and compression tests of electrical terminals, fittings and other parts being connecting up

GOST R 52042-2003: Anchor supports. General specifications

GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements

GOST R 53960-2010: Metal frame yield supports. Trapezoid supports. General specifications

GOST R 55731-2013: Mining equipment. Metal frame yield supports. Ring supports. General specifications

GOST R 56944-2016: Cranes. Overhead crane railway. General specifications

GOST R ISO 16047-2009: Fasteners. Torque/clamp force testing

GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C

I 1.09-10: Instructions for connecting insulated conductors of wires and cables

IM 51216464-009-01: Instructions for use of supporting cable structures of the series "P" on TU 3449-009-51216464-01

L8-508-524: Supports and suspensions of pipelines Dn less than 89 mm. Working drawings

M788-1073: Electrical Construction Documents. General Requirements and Guidelines on Composition and Format

MI 1053-85: State system for ensuring uniformity of measurements. Planimeters Method of verification

ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)

ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes

ODM 218.6.004-2011: Guidelines for road safety ensuring rope guardrails

OST 108.275.29-80: Single-yoke sliding bearings for thermal and nuclear power plants pipelines. Design and dimensions.

OST 108.275.30-80: Double-yoke Slide bearings for pipelines thermal and nuclear power plants. Design and dimensions.

OST 108.275.38-80: Double-yoke support for thermal and nuclear power plants piping. Design and dimensions.

OST 108.275.52-80: Loop units for pipe hangers of CHP plant and nuclear thermal power plant. Design and dimensions.

OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.

OST 13-158-83: Wooden returnable and reusable furniture container. Technical specifications.

OST 13-236-87: Chairs of carpentry, collapsible and folding. Connections, design and dimensions

OST 153-34.0-1001-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension mounting block. Design and dimensions

OST 153-34.0-1001-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Block of hang fastening. Design and dimensions.

OST 153-34.0-1003-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Thrust hinge. Design and dimensions

OST 153-34.0-1003-99А: Assembling units and station pipeline hang detail of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Articulated draft. Design and dimensions.

OST 153-34.0-1004-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring. Design and dimensions

OST 153-34.0-1004-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Spring bloc of hang. Design and dimensions.

OST 153-34.0-1005-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring doubled. Design and dimensions

OST 153-34.0-1005-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Spring dual block of hang. Design and dimensions.

OST 153-34.0-986-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit clamp for horizontal pipelines. Design and dimensions

OST 153-34.0-986-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Saddle block of a hang for horizontal pipelines. Design and dimensions.

OST 153-34.0-989-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit clamp for vertical pipelines. Design and dimensions

OST 153-34.0-989-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Saddle block of a hang for vertical pipelines. Design and dimensions.

OST 24.090.51-86: Clamps for steel ropes. Technical conditions.

OST 24.125.100-01: CHP and NTPP pipeline suspensions. Types.

OST 24.125.111-01: CHP and NTPP pipeline suspensions. Suspension spring units. Design and dimensions.

OST 24.125.112-01: CHP and NTPP pipeline suspensions. Support spring units. Design and dimensions.

OST 24.125.113-01: CHP and NTPP pipeline suspensions. Clamp units for horizontal pipelines. Design and dimensions.

OST 24.125.116-01: CHP and NTPP pipeline suspensions. Clamp units with cross-bar. Design and dimensions.

OST 24.125.118-01: CHP and NTPP pipeline suspensions. Clamp suspensions on support beam with lugs. Design and dimensions.

OST 24.125.122-01: CHP and NTPP pipeline suspensions. Spring clamp suspensions on support beam. Design and dimensions.

OST 24.125.127-01: CHP and NTPP pipeline suspensions. Clamp units for vertical pipelines. Design and dimensions.

OST 24.125.151-01: Fixed support for thermal and nuclear power plants piping. Design and dimensions.

OST 24.125.154-01: Slide bearings for pipelines thermal and nuclear power plants. Design and dimensions.

OST 24.125.166-01: Spring units for supporting pipelines of CHP plant and nuclear thermal power plant. Design and dimensions.

OST 24.191.08-81: Hook crane suspensions. Design and dimensions.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 26-01-1227-75: Longitudinally-split sleeve. Design and basic dimensions.

OST 26-01-1298-81: Flange of vessels and apparatuses made of titanium. Types, Design and dimensions. Strength and integrity calculation procedure.

OST 26-01-155-82: PTFE heat exchangers. Types, main parameters and dimensions

OST 26-01-342-71: Parts of pipelines. Viewing portholes with flat glass. Design and dimensions

OST 26-01-66-86: cap trays for steel columns. Parameters, design and dimensions.

OST 26-02-1401-76: straight-flow valve plates for column devices. Parameters, design and basic dimensions.

OST 26-02-1402-76: straight-flow, four-stream valve plates for columns. Parameters, design and basic dimensions.

OST 26-02-1496-76: Air, gas and liquid medium vessels and devices. Technical specifications.

OST 26-07-266-70: Fasteners. The types and limitations.

OST 26-2038-96: Hex nuts for flange connections. Construction and dimensions.

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 26-2091-93: Horizontal support vessels and equipment. Design.

OST 34 013-74: Protecting fasteners of steel supports for overhead lines by hot dip galvanizing. Technical requirements. Acceptance rules and control methods

OST 34.42.319-77: Parts and components for dust-gas-air ducts of thermal power plants. Trapdoor 500x600 for flat surfaces. Construction and dimensions.

OST 34-10-735-93: Clip for horizontal pipelines. Design and dimensions.

OST 34-10-736-93: Clip for vertical pipelines. Design and dimensions.

OST 34-10-740-93: Units of spring attachment. Design and dimensions.

OST 34-10-742-93: Articulated rod. Design and dimensions.

OST 34-10-743-93: Spring unit. Design and dimensions.

OST 34-10-744-93: Double spring unit. Design and dimensions.

OST 34-10-745-93: Mounting spring unit. Design and dimensions.

OST 34-13-919-86: Support clamps for open distribution devices. Technical conditions

OST 34-13-932-86: Tension mounting clamps. Technical conditions

OST 34-13-941-87: Protective screens. Technical conditions

OST 34-13-946-87: Staples for overhead power lines. Technical conditions

OST 34-13-947-87: Mount junctions. Technical conditions

OST 34-268-75: Supports and suspensions of station pipelines Py <= 40 kgf/cm2 (4 MPa). Supports spring steeply bend. Design and dimensions

OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.

OST 35-22-83: Pipe culverts made of corrugated metal intended for railroad and auto road. Specifications.

OST 36-104-83: Holders and fasteners of steel cold lines. Mobile supports. Construction and dimensions.

OST 36-105-83: Holders and fasteners of steel cold lines. Suspension brackets. Construction and dimensions.

OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-18-77: Device for truing of vertical and tower vessels. Design, dimensions and specifications.

OST 37.002.0444-77: Assembly units and fastening parts of overhead conveyors to the supporting metal structures. Construction and dimensions

PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements

R 50-54-90-88: Recommendations. Calculations and tests of strength. General requirements for strength calculations for threaded connections

RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.10.353: Specified Quantity Allowances for Materials for Repair of Electric Motors

RD 34.20.514-92: Model Guidelines for Operation Gas Supply Systems of Thermal Power Stations

RD 34.30.505-88: Model Guidelines for Operation of Turbine Unit T-100-130 (T-110/120-130) TMZ in Motor Mode

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-0147014-348-89: Guidelines for Corrosion Protection of Field Equipment Using Domestically Manufactured Inhibitors

RD 39-1-43-78: Instructions for the construction of anode grounding from graphite-plastic electrodes in the system of cathodic protection of wells

RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.

RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR

RM 4-264-92: Automation systems. Recommendations for the design of steel structures for wiring and installation of automation equipment

RMK 11-87: Temporary guidelines for the design of process piping heating systems with hot water, steam and steam condensate

RST RSFSR 45-86: Sledge for children. Technical conditions

RST RSFSR 516-88: Eaves metal. Technical conditions

RTM 1.118-2-99: Recommendations for preventing the ascent of protective plastic tubes and for installing an access point during the construction of the FOL

RTM 108.850.02-83: Stationary High-Pressure Steam Boilers with Natural Circulation. Feed Water and Steam Quality Standards

RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units

SA 03-004-07: Calculation of the strength of vessels and apparatus

SN 471-75: Instructions for fastening technological equipment with foundation bolts

SN 78-79: Instructions on the device, operation and relocation of rail tracks of construction tower cranes

SO 34.20.514-2005: Guidelines for the operation of the gas economy of thermal power plants

SO 34.23.605-2005: Guidelines for the installation and removal of plugs on existing gas pipelines of gas supply systems of thermal power plants and boilers

SP 128.13330.2012: Aluminium structures

SP 128.13330.2016: Aluminium structures

SP 16.13330.2011: Steel structures

SP 53-102-2004: General rules for steel structure design

ST TsKBA 009-2007: Pipe fittings. Electrical connectors of electric drives for nuclear power plants. General technical conditions

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements

STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions

STM 14-2-2003: Instruments for measuring and regulating pressure, vacuum. Installation on equipment and construction grounds

SZK 4-3-90: Instruments for measuring and controlling flow. Installation in the pipeline. Part I. Counters

TDA24-1/70: Details of parapets and temperature seams for buildings with type 1 overlapping, made from plates supported by shelves of crossbars

TU 102-152-77: Two-layer metal coating panels without a soft waterproofing carpet for industrial buildings (type ППДС)

TU 102-190-78: Aluminum frame panels for walls of heated industrial buildings

TU 102-236-80: Panels of volume blocks of type OB and boxes of type UB

TU 102-356-83: Three-layer roofing panels from steel corrugated profile and mineral wool insulation

TU 102-357-83: Three-layer steel wall panels with mineral wool insulation for block boxes and blocks

TU 102-358-83: Three-layer steel coating panels with mineral wool insulation for block boxes

TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP

TU 102-367-84: Three-layer steel partition walls with mineral wool

TU 102-416-86: Garage reinforced concrete prefabricated for individual use

TU 102-464-88: Three-layer aluminum frame wall panels with mineral wool insulation

TU 102-58-75: Asbestos-cement framework panels for walls and coatings of heated industrial buildings

TU 14-4-87-72: High-strength thermally treated bolts and nuts with a diameter of M16 - M27 for building steel structures. Technical conditions

TU 1469-001-01297858-98: Rings support-guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case). Technical conditions

TU 1469-001-53597015-01: Rings for guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case)

TU 36.1395905-016-96: Three-layer frame panels with steel facings and mineral wool insulation

TU 5210-001-25432924-2008: Fences, road, metal, barrier type

TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type

TU 5216-006-44884945-2006: Barrier retaining barriers for cars, side in unilateral and bilateral execution of the pavement and road groups

TU 5216-007-44884945-2006: Fencing road restraints for cars, the first type, groups 11Д and 11ДД

TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided

TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal

TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions

TU 67-564-83: Swing gate type of GRP. Technical conditions

VNTP 36-84: Norms of technological design of coal and shale mines. Section "Pipelines laid in underground workings"

VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines

VSN 126-78: Instructions for the use of anchors and nabryzgbetona as a temporary lining of the tunnels

VSN 126-90: Anchored Cast-In-Place Concrete Tunnel Lining for Transportation Tunnels and Subways. Design and Execution Standards

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

VSN 139-83: Guidelines for the Termination, Connection, and Branching of Aluminum and Copper Conductors of Insulated Wires and Cables and for Their Connection to Contacts of Electrical Installations

VSN 164-82: Design and Installation Guidelines to Busways-to-Busway Contact Connections and Connections of Busways to Utilization Equipment Leads

VSN 16-84/USSR Minpromstroy: Instructions for strengthening the foundations of emergency and reconstructed buildings with multi-section piles

VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts

VSN 28-95: Guidelines for Mechanized Installation and Finishing of Suspended Ceilings

VSN 35-86: Guidelines for Installation of Plastic Piping at USSR Gosagroprom Facilities

VSN 362-87: Disinfections and Etching of Pipelines

VSN 371-76: Guidelines for the Manufacturing and Use of Detachable Clamps with Shaped Inserts for Steel Ropes

VSN 438-83: General Specified Quantity Allowances for Building Materials. Compendium 22: Thermal Insulating Operations

VSN 464-85: General Specified Quantity Allowances for Building Materials. Compendium 20: Installation of Industrial Ventilating Systems

GOST 12393-2019: Rail contact network fittings linear. General specifications

GOST 16549-2019: Cast iron plug-through cranes, coupling cast iron, for nominal pressure PN? 1.0 MPa (10 kgf / cm2) with a plug for draining water

GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements

GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements

Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV

Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures

Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial

Order 1487-st: On the restoration of interstate standards in the territory of the Russian Federation

OST 153-34.0-1006-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring support. Design and dimensions

RD 204 USSR 157-84: Recommendations for the design and operation of silicate water treatment plants for corrosion protection of the internal surfaces of hot water pipelines

RD 34.10.354-88: Transformers Consumption of materials for repair

RD 39-3-221-79: Instructions for corrosion protection of oilfield equipment using inhibitors of types IA, ID

RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises

RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers

Series 1.800.9-8: Enclosures made of metal three-layer panels for buildings of seed potato storage with a capacity of 1 thousand tons, vegetable stores with a capacity of 3 thousand tons and fruit storage with a capacity of 1 thousand tons

Series 1.800.9-8: Issue 0. Directions for use. Nodes Working drawings

Series 1.800.9-8: Issue 1. Panels, components. Working drawings

TU 3680-001-04698606-04: Pipe Support

TU 5216-067-36910961-2002: Retention fences, for vehicles, side, first type, single-sided and double-sided

VSN 286-90: Guidelines for the calculation of reinforced concrete chimneys

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!