GOST 7798-70
ГОСТ 7798-70
|
|
Hexagon bolts, product grade B. construction and dimensions
Болты с шестигранной головкой класса точности в. Конструкция и размеры
Status: Restored in the Russian Federation for individual industries. Restored on the territory of the Russian Federation only in relation to products supplied by the State Defense Order (registration information 318-st dated 05/05/2015 - the official website of Rosstandart); IUS 8-2015
The standard applies to hexagon-head bolts of accuracy class B with a thread diameter of 8 to 48 mm.
Стандарт распространяется на болты с шестигранной головкой класса точности В с диаметром резьбы от 8 до 48 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
3/4/1970
SKU: RUSS17000
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.2 Fasteners »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.10 Bolts, screws, studs »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.10 Bolts, screws, studs »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G3 Fasteners for general engineering applications »
G31 Bolts »
National Standards for OKSTU »
METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) »
Loose bolts »
As a Replacement Of:
GOST 7798-62: Bolts with hexagonal head (normal grade of accuracy). Dimensions
The Document References:
GOST 12414-66: Ends of bolts, screws and studs. Sizes
GOST 12414-94: Ends of bolts, screws and studs. Sizes
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 1759.2-82: Bolts, screws, and studs. Surface imperfections and monitoring methods
GOST 24670-81: Bolts, screws and wood screws. Radius under the head
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 27148-86: Fasteners. Screw thread run-out. Washout threads, total thread run-outs and intercuts. Dimensions
The Document is Referenced By:
ATK 24.201.17-90: Stirrers. Types, parameters, design, main dimensions and technical requirements
ATK 24.202.08-90: Ball valve valve four-flow plates for column type devices. Construction and main dimensions
ATK 26-01-1-89: Pipeline viewing lights. Types and designs
ATK 26-02-1-89: Direct-flow valve plates for column-type devices. Options. Construction and main dimensions
ATK 26-02-2-89: Four-flow straight valve plates for column-type apparatus. Options. Construction and main dimensions
ATK 26-02-3-89: Mesh plates with baffle elements for column type devices. Options. Construction and main dimensions
ATK 26-02-4-89: Trapezoid valve plates for column type apparatus. Parameters, design and main dimensions
GOST 10161-83: Cast iron enamelled shower basins. Types and principal dimensions
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10210-83: Pneumatic impact nut wrenches. Basic parameters
GOST 11127-78: Wooden drums for wire ropes. Specifications
GOST 1154-73: Enamelled cast iron bathtubs. Types and basic dimensions
GOST 1154-80: Enamelled cast iron bathtubs. Types and principal dimensions
GOST 12393-2013: Line fittings for overhead system of railways. General common requirements
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 12393-77: Fittings for overhead system of electric railways. General specifications
GOST 14734-69: End washers. Design
GOST 15167-93: Ceramic sanitary ware. General specifications
GOST 16257-70: Chill moulds. Rack core removers. Construction and dimensions
GOST 16258-70: Chill moulds. Hydraulic core removers. Construction and dimensions
GOST 16438-70: Sand and metal moulds for making of fluidity of metals tests
GOST 16561-76: Metal accessories for wood containers. Specifications
GOST 16817-71: Sand and metal moulds for determination of linear shrinkage of non-ferrous metals and alloys. Design and dimensions. Technical requirements
GOST 16818-85: Sand mould intended to produce the sample blanks for testing the mechanical properties of flaky graphite grey cast iron
GOST 17584-72: Cast iron joining rings and fittings for asbestos cement pressure pipes
GOST 18297-96: Pig-iron enameled sanitary devices. Technical conditions
GOST 18853-73: Swing wooden gates for industrial buildings and structures. Specifications
GOST 19305-73: Centrifugal moulds with threaded shank and latch locks. Construction and dimensions
GOST 19306-73: Centrifugal moulds with threaded shank and centrifugal locks. Construction and dimensions
GOST 19306-98: Centrifugal moulds with threaded shank and centrifugal locks. Construction and dimensions
GOST 19307-73: Centrifugal moulds with flange and latch locks. Construction and dimensions
GOST 19308-73: Centrifugal moulds with flange and centrifugal locks. Construction and dimensions
GOST 19308-98: Centrifugal moulds with flange and centrifugal locks. Construction and dimensions
GOST 19309-73: Centrifugal moulds with flange, inserts and centrifugal locks. Construction and dimensions
GOST 19309-98: Centrifugal moulds with flange, inserts and centrifugal locks. Construction and dimensions
GOST 19374-74: Lugs and pads of aluminium core boxes and intermediate plates. Dimensions
GOST 19376-74: Butt walls (plugs) for aluminium core boxes. Dimensions
GOST 19579-80: Units of general purpose adjusting hammer dies for precision die forging by means of crank presses. Design and dimensions
GOST 19804.6-83: Reinforced-concrete round hole built-up piles and tubular piles. Structure and dimensions
GOST 19933-74: General-duty units of dies for die casting. Design and dimensions
GOST 19934-74: General-duty unit for quick-changeable die sets of dies for die casting. Design and dimensions
GOST 19936-74: Bases of dies for die casting. Design and dimensions
GOST 21.502-2007: System of design documents for construction. Execution rules of design and working documents for metal structures
GOST 21029-75: Aluminum barrels for chemical products
GOST 21082-75: Metal casting patterns. Securing of built-up patterns. Design and dimensions
GOST 21083-75: Metal casting patterns. Securing of pattern pieces. Design and dimensions
GOST 21096-75: Window steel panels of hot-rolled and roll-formed sections for industrial buildings
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21459-82: Removable guides for sheet stamping dies. Construction and dimensions
GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications
GOST 22130-86: Steel Pipeline Parts
Movable supports and suspensions
Specifications
GOST 22655-77: Moving out and discharge mechanism of two-cassette stationary press moulds. Basic and coupling dimensions
GOST 23120-2016: Stairways, marching, platforms and fences of steel. Specification
GOST 23120-78: Steel flights of steps, stair landings and railings. Specifications
GOST 23209-78: Versatile press tools for clipping of round in plan view die fordings on crank presses. Design and dimensions
GOST 23210-78: Versatile press tools for clipping of die forgings with elongated axis on crank presses. Design and dimensions
GOST 23211-78: Units of versatile compound dies for clipping and piercing of round in plan vien die forgings on crank presses. Design and dimensions
GOST 23405-78: Pneumatic and hydraulic check valves. Types, main parameters and technical requirements
GOST 23410-78: Shield box viewing windows. Types, construction and dimensions
GOST 23695-2016: Enamelled steel sanitary appliances. Specifications
GOST 23695-94: Enamelled steel sanitary appliances. Specifications
GOST 23759-85: Wash-stands ceramic. Technical requirements
GOST 24199-80: Regulated brackets. Design
GOST 24584-81: Doors of aluminium for public buildings. Types, constructions and dimensions
GOST 24741-2016: Joint for connection of crane rails to steel crane girders. Specifications
GOST 24992-2014: Masonry structures. Method of estimating bonding strength in masonry
GOST 24992-81: Masonry structures. Method of estimating bonding strength in masonry
GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25164-96: Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25573-82: Freight handling rope slings for construction
GOST 25878-2018: Steel molds for the manufacture of reinforced concrete products. Pallets Technical specifications
GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions
GOST 26398-84: Tools for cold upset automatic machines. Bolt heading dies with shank reducing. Construction and dimensions
GOST 26399-84: Tools for cold upset automatic machines. Coning punches. Construction and dimensions
GOST 26400-84: Tools for cold upset automatic machines. Coning punches with injectors. Construction and dimensions
GOST 26401-84: Tools for cold upset automatic machines. Finishing punches. Construction and dimensions
GOST 26402-84: Tools for cold upset automatic machines. Ejectors for bolt manufacturing tools. Construction and dimensions
GOST 26403-84: Tools for cold upset automatic machines. Trim dies. Construction and dimensions
GOST 26404-84: Tools for cold upset automatic machines. Trim punches. Construction and dimensions
GOST 26429-2018: Steel structures of suspended transport tracks. Specifications
GOST 26429-85: Steel structures of suspended transport tracks. Specifications
GOST 26526-85: Vacuum equipment. Flanger joint for high vacuum system. Design, dimensions and technical requirements
GOST 26804-2012: Metal road safety barriers. Specifications
GOST 26804-86: Metal road safety barriers. Specifications
GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications
GOST 28456-90: Expansive dowels for building. General specifications
GOST 28759.5-90: Flanges of vessels and apparatuses
GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications
GOST 32803-2014: Self-stressing concrete. General specifications
GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements
GOST 32885-2014: Automatic coupler model SA-3 and its components. Design and dimensions
GOST 3690-70: Accessories for vertical cylindrical storage tank for petroleum products. Feed nozzles
GOST 3726-67: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps
GOST 4630-71: Accessories for vertical cylindrical storage tank for petroleum products. Safety valves, welded
GOST 5044-79: Thin-walled steel drums for chemical products
GOST 5151-79: Wooden drums for electrical cables and wires. Specifications
GOST 7623-75: Outdoor drainage pipes
GOST 9396-88: Boxes wooden reusable
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51725.9-2009: Catalogization of products for federal state needs. The order of formation and management of general part of the federal products catalogue for federal state needs
GOST R 51725.9-2014: Catalogization of products for federal state needs. The order of fomentation and management of general part of the federal products catalogue
GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications
GOST R 58654-2019: Automobile roads for general use. Spiral corrugated metal pipes. Specifications
GOST R 58753-2019: Cargo rope slings for construction. Technical specifications
GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements
Guideline 3-CVRK: Instructions for operation and repair of carriage axleboxes with roller bearings. 3-CVRK
I 1.09-10: Instructions for connecting insulated conductors of wires and cables
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
IM 51216464-009-01: Instructions for use of supporting cable structures of the series "P" on TU 3449-009-51216464-01
M788-1073: Electrical Construction Documents. General Requirements and Guidelines on Composition and Format
Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV
Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures
Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial
MDS 12-56.2010: Wire rope slings for construction. Recommendations for compilation of technical specifications
ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)
ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes
ODM 218.6.004-2011: Guidelines for road safety ensuring rope guardrails
Order 572-st: On the approval of the national standard
Order 573-st: On the approval of the national standard
OST 108.275.53-80: Loop units for pipe hangers of nuclear thermal power plant. Design and dimensions.
OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.
OST 153-34.0-986-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit clamp for horizontal pipelines. Design and dimensions
OST 153-34.0-986-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Saddle block of a hang for horizontal pipelines. Design and dimensions.
OST 153-34.0-989-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit clamp for vertical pipelines. Design and dimensions
OST 153-34.0-989-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Saddle block of a hang for vertical pipelines. Design and dimensions.
OST 24.125.113-01: CHP and NTPP pipeline suspensions. Clamp units for horizontal pipelines. Design and dimensions.
OST 24.125.127-01: CHP and NTPP pipeline suspensions. Clamp units for vertical pipelines. Design and dimensions.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 26-01-1298-81: Flange of vessels and apparatuses made of titanium. Types, Design and dimensions. Strength and integrity calculation procedure.
OST 26-01-138-81: Threaded joints for vessels and devices for pressure over 9,81 up to 98,1 MPа (over 100 up to 1000 kgf/cm2). Types and dimensions.
OST 26-01-566-72: Fixing devices. Hexagon-headed bolts (normal precision). Design and dimensions (limit of GOST 7798-70)
OST 26-01-66-86: cap trays for steel columns. Parameters, design and dimensions.
OST 26-01-86-88: fixed metal seals for vessels and apparatus for pressure over 10 to 100 MPa (100 to 1000 kgf / cm2). Types. Design and dimensions. Technical requirements . Acceptance rules. Control methods.
OST 26-02-1401-76: straight-flow valve plates for column devices. Parameters, design and basic dimensions.
OST 26-02-1402-76: straight-flow, four-stream valve plates for columns. Parameters, design and basic dimensions.
OST 26-07-266-70: Fasteners. The types and limitations.
OST 26-1111-74: Plates TSK-RC, TSK-RB for column apparatus. Parameters, design and dimensions
OST 26-2037-96: Bolts with hexagonal head for flange joints. Design and dimensions.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 26-705-79: Plates ТСН ТСН-2 and-3 of columns. Design and dimensions.
OST 26-805-73: Perforated plates of column apparatus. Type and parameters. Design and dimensions.
OST 34-10-735-93: Clip for horizontal pipelines. Design and dimensions.
OST 34-10-736-93: Clip for vertical pipelines. Design and dimensions.
OST 34-13-910-86: Cargo rope slings for construction. Technical conditions
OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.
OST 35-22-83: Pipe culverts made of corrugated metal intended for railroad and auto road. Specifications.
OST 36-105-83: Holders and fasteners of steel cold lines. Suspension brackets. Construction and dimensions.
OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 36-18-77: Device for truing of vertical and tower vessels. Design, dimensions and specifications.
OST 36-60-81: Welding at installation of steel building constructions. Main provisions.
OST 37.002.0444-77: Assembly units and fastening parts of overhead conveyors to the supporting metal structures. Construction and dimensions
OST 45.85-96: Wooden and metal shelf stands for electric power storages applied by telecommunication enterprises. General requirements.
PKO-2010.6: Reference materials for the design work of the electrical part of the project
PNST 309-2018: Roads are public. Bridges and pipes road. Technical requirements
RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.
RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above
RD 204 USSR 157-84: Recommendations for the design and operation of silicate water treatment plants for corrosion protection of the internal surfaces of hot water pipelines
RD 27.05.01-2017: Guidance document for the repair and maintenance of wheelsets with axleboxes for freight cars of 1520 (1524) mm track gauge main railways
RD 32 TsV 052-2005: Repair of freight car trucks
RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.
RD 34.10.353: Specified Quantity Allowances for Materials for Repair of Electric Motors
RD 34.10.354-88: Transformers Consumption of materials for repair
RD 34.20.514-92: Model Guidelines for Operation Gas Supply Systems of Thermal Power Stations
RD 34.30.505-88: Model Guidelines for Operation of Turbine Unit T-100-130 (T-110/120-130) TMZ in Motor Mode
RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations
RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-1-43-78: Instructions for the construction of anode grounding from graphite-plastic electrodes in the system of cathodic protection of wells
RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RM 2970: Device for damping the speed of the fall of waste in the garbage disposal of multifunctional high-rise buildings. Stage I
RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR
RM 4-264-92: Automation systems. Recommendations for the design of steel structures for wiring and installation of automation equipment
RMG 110-2010: State system for ensuring the uniformity of measurements. Cylindrical reinforced-concrete tanks with precast wall with capacity up to 30 000 m3. Procedure of verification by geometrical method
RMK 11-87: Temporary guidelines for the design of process piping heating systems with hot water, steam and steam condensate
RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units
Series 1.800.9-8: Enclosures made of metal three-layer panels for buildings of seed potato storage with a capacity of 1 thousand tons, vegetable stores with a capacity of 3 thousand tons and fruit storage with a capacity of 1 thousand tons
Series 1.800.9-8: Issue 0. Directions for use. Nodes Working drawings
Series 1.800.9-8: Issue 1. Panels, components. Working drawings
SN 471-75: Instructions for fastening technological equipment with foundation bolts
SN 78-79: Instructions on the device, operation and relocation of rail tracks of construction tower cranes
SNiP 2.03.06-85: Aluminium structures
SNiP I-V.14-69: Asbestos-cement products
SO 34.20.514-2005: Guidelines for the operation of the gas economy of thermal power plants
SP 128.13330.2012: Aluminium structures
SP 128.13330.2016: Aluminium structures
SP 16.13330.2011: Steel structures
SP 260.1325800.2023: Thin-walled steel structures made of cold-formed galvanized profiles and corrugated sheets. Design rules
SP 445.1325800.2018: Culverts and drainage systems in permafrost areas. Design rules
ST RK 1278-2004: Road restrictions systems. Metal safety barriers. Specification
STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions
STM 14-2-2003: Instruments for measuring and regulating pressure, vacuum. Installation on equipment and construction grounds
SZK 4-3-90: Instruments for measuring and controlling flow. Installation in the pipeline. Part I. Counters
TDA24-1/70: Details of parapets and temperature seams for buildings with type 1 overlapping, made from plates supported by shelves of crossbars
TR 12220-TI.2001: URSA thermal insulation products in the construction of thermal insulation of industrial equipment. Recommendations for use with technical solutions album
TU 102-152-77: Two-layer metal coating panels without a soft waterproofing carpet for industrial buildings (type ППДС)
TU 102-356-83: Three-layer roofing panels from steel corrugated profile and mineral wool insulation
TU 102-357-83: Three-layer steel wall panels with mineral wool insulation for block boxes and blocks
TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP
TU 102-367-84: Three-layer steel partition walls with mineral wool
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m
TU 14-4-87-72: High-strength thermally treated bolts and nuts with a diameter of M16 - M27 for building steel structures. Technical conditions
TU 1469-001-01297858-98: Rings support-guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case). Technical conditions
TU 1469-001-53597015-01: Rings for guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case)
TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions
TU 3680-001-04698606-04: Pipe Support
TU 5210-001-25432924-2008: Fences, road, metal, barrier type
TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type
TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions
TU 5216-002-18601734-2000: Metal road holding guard for cars, side, first type, single-sided
TU 5216-006-44884945-2006: Barrier retaining barriers for cars, side in unilateral and bilateral execution of the pavement and road groups
TU 5216-007-44884945-2006: Fencing road restraints for cars, the first type, groups 11Д and 11ДД
TU 5216-017-00110604-02: Fences bridge, holding, for cars, side, first type, single-sided
TU 5216-021-00110604-03: Road guardrail for cars, side, first type, metal, single-sided
TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided
TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal
TU 5216-067-36910961-2002: Retention fences, for vehicles, side, first type, single-sided and double-sided
TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions
TU 84-738-83: Gear pumps for pressure P = 0.5 MPa (5 kgf/cm2) for machine tools and other stationary machines
VNTP 36-84: Norms of technological design of coal and shale mines. Section "Pipelines laid in underground workings"
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges
VSN 139-83: Guidelines for the Termination, Connection, and Branching of Aluminum and Copper Conductors of Insulated Wires and Cables and for Their Connection to Contacts of Electrical Installations
VSN 164-82: Design and Installation Guidelines to Busways-to-Busway Contact Connections and Connections of Busways to Utilization Equipment Leads
VSN 16-84/USSR Minpromstroy: Instructions for strengthening the foundations of emergency and reconstructed buildings with multi-section piles
VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts
VSN 35-86: Guidelines for Installation of Plastic Piping at USSR Gosagroprom Facilities
VSN 362-87: Disinfections and Etching of Pipelines
VSN 371-76: Guidelines for the Manufacturing and Use of Detachable Clamps with Shaped Inserts for Steel Ropes
VSN 438-83: General Specified Quantity Allowances for Building Materials. Compendium 22: Thermal Insulating Operations
VSN 464-85: General Specified Quantity Allowances for Building Materials. Compendium 20: Installation of Industrial Ventilating Systems
VSN 86-83: Guidelines for the Design and Installation of Polymeric Bridge Support Components
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.