imgalt

GOST 27006-86

ГОСТ 27006-86

Concretes. Rules for mix proportioning

Бетоны Правила подбора состава

Status: Effective - Introduced for the first time till 01.01.2020

This standard applies to structural heavy, light, cellular and dense silicate concretes according to GOST 25192-82 and establishes the rules for the selection, appointment and issuance of concrete composition at enterprises and construction organizations in the manufacture of precast concrete and reinforced concrete products structures and structures, as well as in the justification of production and technical norms of materials consumption

Настоящий стандарт распространяется на конструкционные тяжелый, легкий, ячеистый и плотный силикатный бетоны по ГОСТ 25192-82 и устанавливает правила подбора, назначения и выдачи в производство состава бетона на предприятиях и строительных организациях при изготовлении сборных бетонных и железобетонных изделий и конструкций и бетонной смеси для монолитных конструкций и сооружений, а также при обосновании производственно-технических норм расхода материалов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Council of Ministers of the USSR for Construction, 3/25/1986

SKU: RUSS17020

Price: $184.00

English keywords: concrete; concrete products;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh13 Concretes and mortars »


The Document is Replaced With:

GOST 27006-2019: Concrete Rules for the selection of composition

The Document References:

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10181-2000: Concrete Mixtures Test method

GOST 13015.3-81: Prefabricated concrete and reinforced concrete constructions and products. Quality certificate

GOST 18105-86: Concretes. Rules for the strength control

GOST 25192-82: Concretes. Classification and general technical requirements

GOST 27005-86: Light-weight and cellular concretes. Rules of average density control

The Document is Referenced By:

GOST 10181-2000: Concrete Mixtures Test method

GOST 10181-2014: Concrete mixtures. Methods of testing

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 17608-2017: The concrete paving slabs. Specifications

GOST 17608-91: Footway concrete slabs. Specifications

GOST 17624-87: Concrete. Ultrasonic method of strength determination

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 18105-2018: Concrete Rules for control and strength assessment

GOST 18105-86: Concretes. Rules for the strength control

GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements

GOST 25098-2016: Reinforced concrete panels for partitions in industrial and agricultural buildings. Specifications

GOST 25485-89: Cellular concretes. Specifications

GOST 25820-2000: Lightweight aggregates concretes. Specifications

GOST 25820-2014: Lightweight aggregates concretes. Specifications

GOST 25820-83: Lightweight concrete. Specifications

GOST 25912-2015: Prestressed reinforced concrete slabs for aerodrome pavement. Specifications

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 27005-2014: Light-weight and cellular concretes. Rules for control and assessment density

GOST 27005-86: Light-weight and cellular concretes. Rules of average density control

GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency

GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency

GOST 30459-96: Concrete additives

GOST 31356-2007: Dry building cement binder mixes. Test methods

GOST 31360-2007: Wall unreinforced products of cellular autoclave curing concrete. Specifications

GOST 32492-2015: Fibre-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties

GOST 32803-2014: Self-stressing concrete. General specifications

GOST 32943-2014: Materials and systems for the protection and repair of concrete structures. Requirements to bonded connections of structural strengthening elements

GOST 33128-2014: Automobile roads of general use. Road restraint systems. Technical requirements

GOST 33762-2016: Products and systems for the protection and repair of concrete structures. Requirements for injection-sealing compounds and seals of cracks, cavities and clefts

GOST 33929-2016: Concrete with polysterene aggregates. Specifications

GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements

GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications

GOST 7473-2010: Fresh concrete. Specifications

GOST 7473-85: Ready-mixed concrete. Specification

GOST 7473-94: Ready-mixed concrete. Specifications

GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods

GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications

GOST R 51263-99: Concrete with polysterene aggregates. Specifications

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 53231-2008: Concretes. Rules for control and assessment of strength

GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications

GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures

GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications

GOST R 57255-2016: Photo catalytic self-cleaning concrete. Specifications

GOST R 58277-2018: Dry mixes for building on cement binder. Test methods

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work

MI 2488-98: Recommended Practice. National Measurement Standards. Method for Accelerated Determination of Water-to-Cement Ratio and Prediction and Monitoring Strength of Cement From its Shrinkage

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic

ODM 218.2.035-2013: Recommendations for the use of fly ash in concrete foundations of roads

ODM 218.3.012-2011: Cements for concrete coatings and road foundations

ODM 218.3.015-2011: Guidelines for the construction of cement concrete pavements in sliding forms

ODM 218.3.037-2014: Recommendations for monitoring the strength of cement concrete pavements and foundations of roads by sample

ODM 218.3.039-2014: Recommendations for testing film-forming materials for the care of freshly laid concrete

ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials

ODM 218.3.057-2015: Method of assessing and monitoring the air porosity of road cement concrete using the software for processing data of optical microscopy of thin sections

ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles

ODM 218.3.106-2018: The use of flexible concrete surface coatings to protect and strengthen roads

OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments

PNST 213-2017: Nanomaterials. Fresh concrete nanomodified for protective concrete. Technical requirements and test methods

RD 12.18.076-88: Guidelines for the technology of preparation of concrete with chemical additives

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings

RMD 52-12-2012 Sankt-Peterburg: Typical temporary concrete fences during work on the city’s road network

RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures

RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet

RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber

RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire

RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -

SNiP 3.03.01-87: Bearing and enclosing structures

SNiP 3.06.04-91: Bridges and pipes

SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 243.1326000.2015: Design and construction of low-volume roads

SP 250.1325800.2016: Building and structures. Protection against groundwater

SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

SP 46.13330.2012: Bridges and pipes

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 78.13330.2012: Automobile roads

SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations

ST RK 1409-2005: Reinforced concrete road signs supports. Specification

STB 1081-97: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Technical conditions

ST-NP SRO SSK-03-2013: Rules for monitoring and assessing the strength of concrete in monolithic structures

STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization

Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement

TR 144-04: Technical recommendations on the use of waterproofing materials "Akvatron"

TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings

TR 92-99: Technical recommendations on the use of the mineral expanding additive to cements IR-1

TR 95.14-01: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 14: Standard Procedure for Foundation Construction

TR 97-99: Guide to Good Practice for Comprehensive Site Improvements and Amenities for Residential Complexes

TR 99-99: Technical recommendations on the use of waterproofing mortars and concrete with the material "Akvatron-6" for underground construction

TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab

TU 5745-001-42806964-97: Dry Non-Shrink Mixture Monofleks-A

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions

TU 5870-001-21655395-2000: Cellular Concrete. Technical Specifications

VSN 130-92: Execution and Acceptance Requirements for Sealing Joints and Openings in Precast Tunnel Lining Installed Using Tunnel Boring Methods

VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction

VSN 46-96: Instruction on preparation and use of concrete with sodium nitrite additive in winter conditions

VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels

VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures

VSN 83-92: Technical instructions for the use of concrete and cement-sand mortars hardening in the frost, in the construction of artificial structures

VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation

VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!