GOST 23118-99

ГОСТ 23118-99

Steel construction structures General Technical Specifications

Конструкции стальные строительные. Общие технические условия

Status: Not effective - Superseded. IUS 10-2013

The standard applies to steel building structures of steel grades not exceeding C440 for buildings and structures for various purposes, intended for use in any climatic regions with seismicity up to 9 points inclusive, and establishes general requirements for these structures. The standard does not apply to structures that play the role of technological equipment (steel structures of blast furnaces and air heaters, tanks and gas holders, radiating structures of antenna structures, shaft headpieces, structures of lifting and transport equipment and elevators, main and technological pipelines), as well as railway and road bridges and hydraulic structures.

Стандарт распространяется на стальные строительные конструкции из стали марок не выше С440 для зданий и сооружений различного назначения, предназначенные для применения в любых климатических районах с сейсмичностью до 9 баллов включительно, и устанавливает общие требования к этим конструкциям. Стандарт не распространяется на конструкции, выполняющие роль технологического оборудования (стальные конструкции доменных печей и воздухонагревателей, резервуары и газгольдеры, излучающие конструкции антенных сооружений, надшахтные копры, конструкции подъемно-транспортного оборудования и лифтов, магистральные и технологические трубопроводы), а также на конструкции железнодорожных и автодорожных мостов и гидротехнических сооружений.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 36

Approved: Gosstroy of Russia, 10/19/1999

SKU: RUSS17031

Price: $202.95




The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » K.53 Metal structures »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Welding staff »

Welding regulations » Admission Testing »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.10 Metal constructions »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.10 Metal constructions »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh34 Metal structures and parts »


The Document is Replaced With:

GOST 23118-2012: Building steel structures. General specifications

As a Replacement Of:

GOST 23118-78: Structural metalwork. General specifications

GOST 4.253-80: Product-quality index system. Beilding. Steel structures. Nomenclature of indixes

SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.

The Document References:

GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 14192-96: Cargo marking

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15.005-86: Creation of articles manufactured individually or in small batches and assembled at the place of operation

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 18160-72: Fasteners. Packing. Marking. Transportation and storage

GOST 19.402-78: Unified system for program documentation. Program description

GOST 2.314-68: Unified system for design documentation. Instructions for marking and stamping articles

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles

GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances

GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation

GOST 22235-76: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations

GOST 22353-77: High strength bolts of product grade B. Construction and dimensions

GOST 22356-77: High strength bolts and nuts аnd washes. General specifications

GOST 23118-78: Structural metalwork. General specifications

GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy

GOST 24297-87: Input inspection of products. General provisions.

GOST 25726-83: Letter and numerical hand stamps. Types and basic dimensions

GOST 26047-83: Building steel structures

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26433.2-94: System of ensuring geometric parameters accuracy in building. Rules for measuring parameters of buildings and works

GOST 4.253-80: Product-quality index system. Beilding. Steel structures. Nomenclature of indixes

GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions

GOST 5336-80: Single woven steel grids

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.402-80: Metal surface preparation for painting

SNiP 2.03.11-85: Corrosion protection of buildings structures

The Document is Referenced By:

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 21.502-2007: System of design documents for construction. Execution rules of design and working documents for metal structures

GOST 23120-78: Steel flights of steps, stair landings and railings. Specifications

GOST 31173-2003: Steel doors. Specifications

GOST 31174-2003: Gates of metall. General specifications

GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements

GOST R 51110-97: Equipment for bank protection. General technical requirements

GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions

GOST R 52604-2012: Water attractions. Safety at operation. General requirements

GOST R 52664-2006: Welded pipe sheet piles. General specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 53130-2008: Safety of attractions. General requirements

GOST R 53254-2009: The firefighting equipment. Stationary external fire ladders. Buildings roof railings. General technical requirements. Test methods

GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements

GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications

GOST R 54392-2011: Electrical installations of livestock building. Methods of potential equalization

GOST R 54834-2011: Equipment for bank protection. Mobile cash operation terminals. General technical requirements

GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications

GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

MDS 12-60.2011: Production design for installation of steel structures of buildings

MDS 53-2.2004: Diagnostics of welded steel structures

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

NB ZhT TsE 067-2003: Supporting structures of the contact network elements. Safety standards

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements

RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities

RD 03-422-01: Guidelines for the conduct of expert surveys of mine hoists

RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SP 16.13330.2011: Steel structures

SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects

SP 46.13330.2012: Bridges and pipes

SP 53-101-98: Manufacturing and quality control of steel structures for construction

SP 53-102-2004: General rules for steel structure design

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided

STO 1.1.1.01.0678-2015: Basic rules for ensuring the operation of nuclear power plants

TU 5216-021-00110604-03: Road guardrail for cars, side, first type, metal, single-sided

TU 5216-067-36910961-2002: Retention fences, for vehicles, side, first type, single-sided and double-sided

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!