imgalt

GOST 10706-76

ГОСТ 10706-76

Electrically welded steel line-weld tubes. Technical requirements

Трубы стальные электросварные прямошовные Технические требования

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)

The standard applies to longitudinal longitudinal electric-welded pipes with a diameter of 478-1420 mm.

Стандарт распространяется на прямошовные электросварные трубы общего назначения диаметром 478-1420 мм.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 4/22/1976

SKU: RUSS17059

Price: $79.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Main materials » Steel, cast iron »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V6 Pipes metal and pipe products » V62 Steel pipes and their connecting parts »

National Standards for OKSTU » STEEL PIPES » Thin-walled electric-welded carbon pipes (up to 114 mm in diameter) »

National Standards for OKSTU » STEEL PIPES » Electric-welded oil pipes (diameter from 114 to 480 mm) »


As a Replacement Of:

GOST 10706-63: Electric welded longitudinal steel pipes. Technical requirements

The Document References:

GOST 10006-80: Metal pipes

GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage

GOST 10704-91: Electrically welded steel line-weld lubes. Range

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 162-90: Depth gauges. Specifications

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 380-94: Normal quality carbon steel

GOST 3845-75: Metallic tubes. Hydraulic pressure testing method

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7502-89: Measuring metal tapes. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

The Document is Referenced By:

ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements

GOST 10704-76: Electric welded longitudinal steel pipes. Assortment

GOST 10704-91: Electrically welded steel line-weld lubes. Range

GOST 24379.0-2012: Foundation bolts. General specifications

GOST 24379.0-80: Foundation bolts. General specification

GOST 31311-2005: Heating devices. General specifications

GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 34329-2017: Formworks. General specifications

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 5466-74: Soil transfering pipes

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52664-2006: Welded pipe sheet piles. General specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General

GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines

GOST R 70313-2022: Public roads. Bridge structures. Rules for the arrangement of staircases and operating facilities

GOST R 70461-2022: Construction works and typical technological processes. Steel structures made of pipes and closed profiles. Rules and control of installation work

Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083

Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP

Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems

Manual for SNiP 2.04.02-84: Cooling Tower Design Guide

Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment

Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants

Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems

Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks

Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities

Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction

Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)

Manual for SNiP 2.06.15-85: Flood forecasts and calculation of drainage systems in built-up and built-up areas

Manual for SNiP II-37-76: Manual for the use of steel pipes for the construction of gas supply systems

MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads

ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes

OST 153-34.0-970-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 2.5 MPa (25 kgf/cm2). Sleeve for passage through the ceiling. Design and dimensions

OST 153-34.0-970-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 2,5 MPa. The plug for passage through the ceiling. Design and dimensions.

OST 153-34.0-971-99A: Assembly units and support parts of the station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Sleeve for passage through the roof. Design and dimensions

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 36-26-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (≈ 25 kg/cm2). General technical requirements.

OST 36-62-81: Hoisting equipment. General technical requirements.

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD 39-9-254-79: Guidelines for the design of oilfield facilities using a waterflooding method with polymers

Resolution: Rules for the design and safe operation of steam and hot water boilers

RM 4-266-93: Embedded devices in pipelines and equipment for installation of instruments and automation equipment. Guide to the choice of means of strengthening holes

RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

Safety Guide: Recommendations on arrangement and safe operation of process pipelines

Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products

SN 412-70: Consumption rates of materials, pipes, sanitary ware and heating devices per 1 million rubles. estimated cost of construction and installation works. Light industry. Food industry. Meat and dairy industry. Fish industry

SN 416-70: Consumption rates of materials, pipes, sanitary wares and heating devices for 1 million rubles. estimated cost of construction and installation works. Oil industry. Oil refining industry. Chemical (petrochemical) industry. Gas industry. Transportation of

SN 421-71: Consumption rates of materials, pipes, sanitary ware and heating devices for 1 million rubles. estimated cost of construction and installation works. Non-ferrous metallurgy

SN 425-71: Consumption rates of materials, pipes, sanitary wares and heating devices per 1 million rubles. estimated cost of construction and installation works. Ferrous metallurgy

SN 425-78: Consumption rates of materials and products for 1 million rubles. estimated cost of construction and installation works

SNiP 2.04.12-86: Steel pipelines strength analysis

SNiP II-40-80: Metro

SNiP II-58-75: Thermal power stations

SP 16.13330.2011: Steel structures

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 294.1325800.2017: The construction of steel. Design rules

SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling

SP 368.1325800.2017: Residential buildings. Rules of design major repair

SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems

SP 510.1325800.2022: Heating units and internal heating systems

SP 53-102-2004: General rules for steel structure design

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

STN TsE 141-99: Design norms for contact network

TU 1390-002-86695843-08: Steel pipes and parts of pipes with internal anti-corrosion coating based on highly viscous materials

TU 1390-010-86695843-2011: Steel pipes and pipeline components welded with an internal anti-corrosion coating based on a paint material with high dry residue

TU 1390-012-86695843-2011: Steel pipes and fittings 57–2020 mm in diameter with internal single-layer coating based on liquid solvent-free epoxy materials

TU 1390-014-86695843-2011: Steel pipes and parts of pipelines with external two-layer epoxy anticorrosion coating

TU 1390-015-86695843-2011: Steel pipes with Stelrant external anticorrosion polyurethane coating

TU 1394-006-86695843-10: Steel pipes with epoxy protective coating

TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions

TU 14-3-1430-87: Pipes, Seamless and Welded, Second-Grade

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines

VRD 39-1.11-014-2000: Procedural Guidelines for Inspection and Identification of Steel Pipes for Gas and Petroleum Pipelines

VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

VSN 3-94: Industry-Specific Building Code for the Installation of Underground Cold Water Supply Pipelines Made of Steel Pipe 300-600 mm in Diameter with Internal Cement-Sand Insulation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!