GOST 23941-79
ГОСТ 23941-79
|
|
Noise of machines. Methods for determination of noise characteristics. General requirements
Шум машин Методы определения шумовых характеристик Общие требования
Status: Not effective - Superseded
The standard applies to machines, machinery, process equipment and other sources of noise, and sets the noise characteristics of noise sources and noise characteristics of people’s locations, as well as methods for measuring them, which are necessary for estimating, rationing noise and carrying out measures to reduce it. The standard does not establish methods for determining the noise characteristics of noise sources during their movement, noise in air ducts, etc.
Стандарт распространяется на машины, механизмы, технологическое оборудование и другие источники шума и устанавливает шумовые характеристики источников шума и шумовые характеристики мест нахождения людей, а также методы их измерения, которые необходимы для оценки, нормирования шума и проведения мероприятий по его снижению. Стандарт не устанавливает методов определения и шумовых характеристик источников шума при их передвижении, шумов в воздуховодах и т. п.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
12/29/1979
SKU: RUSS17071
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
5 Protection against mechanical vibrations »
5.2 Acoustic noise »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
I Legal and organizational basis of labor protection »
3 Organization of labor protection at enterprise »
3.3 Special assessment of working conditions »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.01 Acoustic measurements and noise control in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.01 Acoustic measurements and noise control in general »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.20 Noise from machinery and equipment »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.20 Noise from machinery and equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T3 Physics and Mechanics »
T34 Oscillatory and wave-like movements. Bodies vibration. Sound. Acoustics »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Exact and natural sciences »
The Document is Replaced With:
GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements
The Document References:
GOST 17168-82: Octave and one-third-of-octave electronic filters
GOST 17187-81: Noise meters
The Document is Referenced By:
GOST 11004-84: Principal ventilation mine blowers
GOST 11032-97: Domestic gas storage water heaters. General specifications
GOST 11929-87: Rotating electrical machinery. General test methods. Noise levels determinations
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.020-79: Occupational safety standards system. Noise. Method of control for sea and river vessels
GOST 12.1.024-81: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in anechoic room. Precision method
GOST 12.1.025-81: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in reverberation room. Precision method
GOST 12.1.026-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in a free-field over reflecting plane. Engineering method
GOST 12.1.027-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in reverberation room. Engineering method
GOST 12.1.028-80: System of the standards for safety of work
GOST 12.1.035-81: Arc and resistance-welding equipment. Noise exposure limits and methods of measurement
GOST 12.2.016.1-91: Compressor equipment
GOST 12.2.016-81: Occupational safety standards system. Gas compressing equipment. General safety requirements
GOST 12.2.024-87: Noise. Power oil-immersed transformers.
GOST 12.2.028-84: General-purpose ventilators. Methods of noise characteristics determination
GOST 12.2.030-83: Manual machines. Noise characteristics. Norms. Control methods
GOST 12.2.038-84: Occupational safety standards system. Web teleprinters. Permissible levels of noise characteristics and its control methods
GOST 12.2.040-79: Positive-displacement hydraulic drives and lubricating systems. General safety requirements for construction
GOST 12.2.041-79: Occupational safety standards system. Drilling equipment. Safety requirements
GOST 12.2.094-83: Occupational safety standards system. Rolling equipment. General safety requirements
GOST 12.2.096-83: Standard system of labour safety. Steam boilers with pressure up to 0.07 MPa. Safety requirements
GOST 12.2.102-89: Machines and equipment for timber logging and floating, forestry tractors
GOST 12.2.105-84: Occupational safety standards system. Mineral processing equipment. General safety requirements
GOST 12.2.106-85: Occupational safety standards system. Machines and mechanisms for mining of ore, non-ore and placer deposits. General hygienic requirements and methods of testing
GOST 12.2.110-85: Air piston stationary general-purpose compressors
GOST 12.2.110-95: Air piston compressors, stationery, of general purpose. Norms and methods for determining the noise parameters.
GOST 12.2.112-86: Occupational safety standards system. Mine electric locomotive transport. General requirements for rolling stock
GOST 12.2.136-98: Occupational safety standards system. Sucker-rod pumping ground equipment. Safety requirements
GOST 12.2.138-97: Industrial sewing machines
GOST 12.4.095-80: Occupational safety standard system. Agricultural self-propelled machines. Methods of determination of vibration and noise characteristics
GOST 14177-88: Spindles with built-in drive
GOST 16349-85: Cyclic mixers for building materials
GOST 16372-84: Electric rotary machines. Limit values of noise levels
GOST 16372-93: Rotating electric machines. Limiting values of noise levels
GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement
GOST 18130-79: Semi-automatic machines for consumable electrode arc welding
GOST 19862-87: Pneumatic drives. Methods of measuring parameters
GOST 20790-82: Medical instruments, apparatus and equipment. General specifications
GOST 20791-83: Centrifugal glandless electric pumps. Technical requirements
GOST 22502-89: Condensing units with hermetic refrigeration compressors for commercial refrigeration machinery
GOST 22649-83: Medical air sterilizers
GOST 23023-85: Light-weight propeller aeroplanes. Acceptable noise levels on ground and methods for its determination
GOST 23067-78: Electric heating equipment for public catering establishments. General specifications
GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST 24277-91: Stationary steam turbines for nuclear power plants. General specifications
GOST 24278-89: Stationary steam turbine plants for driving electric generators at thermal power stations
GOST 24282-86: Flexible-way electric powered vehicles. Testing methods
GOST 24282-97: Floor-mounted flexible electrified vehicles. Testing methods
GOST 24464-80: Feeding pumps of power untis of nuclear power plants
GOST 26053-84: Industrial robots. Acceptance rules. Methods of test
GOST 26161-89: Operating tables
GOST 26279-84: Power units for organic thermal stations. General requirements for noise suppression
GOST 26329-84: Computers and data processing systems
GOST 26546-85: Chain variators. General specifications
GOST 26699-98: Underground drilling rigs. General specifications and test methods
GOST 26917-2000: Underground loading machines. General technical requirements and test methods
GOST 26957-86: Variator with wide angle belt pulleys. General specifications
GOST 27243-87: Noise. Survey method for the determination of sound powder levels of machinery by standard noise source
GOST 27408-87: Noise. Methods for statistical processing of data in determination and control of machine emitted noise level
GOST 27409-87: Regulation of stationary equipment noise characteristics. Basic standardization
GOST 27441-87: Gas apparatuses for thermal treatment of food for the plants of public catering classification, general technical requirements and test methods
GOST 27871-88: Reducers of general usage. Methods for the determination of the sound power level
GOST 28100-89: Noise silencers. Methods for determination of acoustic characteristics
GOST 30275-96: Manipulators for contact spot welding. General specifications
GOST 30530-97: Noise. Methods for calculation of limit admissible nose characteristics of stationary machines.
GOST 30575-98: Marine, locomotive and industrial diesel engines. Methods of measuring and estimating airborne noise
GOST 30690-2000: Removable acoustical screens. Methods for determination of the in situ sound attenuation
GOST 30691-2001: Noise of machines. Declaration and verification of noise emission values
GOST 30720-2001: Noise of machines. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
GOST 31275-2002: Noise of machinery. Determination of sound power levels of noise sources using sound pressure method. Engineering method in an essentially free sound field over a reflecting plane
GOST 31276-2002: Noise of machinery. Determination of sound power levels of noise sources using sound pressure method. Engineering methods for small portable noise sources in reverberant fields in rooms with hard walls and special reverberation chambers
GOST 4.154-85: Product-quality index system. Electrical rotating frames, number above 56 to 355 including. Nomenclature of indices
GOST 4.22-85: Quality ratings system. Lifting capacity cranes. Quality charasteristics nomenclature
GOST 4.303-85: System of product-quality indices. Magnetic and electromagnetic separators. Nomenclature of indices
GOST 4.354-85: Product-quality index system. Underground loading machines. Index nomenclature
GOST 4.356-85: Product-quality index system. Floatation machines. Nomenclature of indices
GOST 4.357-85: Index system production quality. Underground loading-transport machines. Index nomenclature
GOST 4.360-85: Product-quality index system. Reprography. Micrography. Microfilm cameras. Index nomeclature
GOST 4.37-90: System of production quality indexes. Positive displacement hydraulic drives, pneumatic drives and lubrication systems. Nomenclature of indeces
GOST 4.474-87: Product-quality index system. Building tower cranes. Index nomenclature
GOST 4.479-87: The system of product quality factors. Rolling bearings. Nomenclature of quality factors
GOST 4.490-89: Product - quality index system. Electron accelerators for radiotherapy. Index nomenclature
GOST 4.491-89: Product-quality index system. Hot-water heating boilers with capacity up to 100 kW. Nomenclature of indices
GOST 6134-87: Rotor-dynamic pumps
GOST 6625-85: Mine local ventilating fans
GOST R 12.2.133-97: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods
GOST R 12.2.141-99: Occupational safety standards system. Surface drilling equipment. Safety requirements
GOST R 50573-93: Metal forging machines. Noise characteristics and methods of their determination
GOST R 50660-94: Hand knitter machinery. Safety requirements and test methods
GOST R 51400-99: Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
Manual: Manual for impulse and low consumption fire extinguishing systems
MR 2986-84: Guidelines for the fight against noise and vibration in the steel industry
ONTP 01-94: Sectoral norms of technological design of enterprises in the automotive industry. Forge and press shops
ONTP 02-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Woodworking Shops
ONTP 02-94: Sectoral norms of technological design of enterprises in the automotive industry. Woodworking shops (sites)
ONTP 04-94: Sectoral norms of technological design of enterprises in the automotive industry. Shops of cold sheet metal stamping
ONTP 07-86: All-Union norms for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Foundries and warehouses of charge and molding materials
ONTP 14-96 (I): Sectoral norms of technological design of enterprises in the automotive industry. Mechanical processing shops
ONTP 14-96 (II): Sectoral norms of technological design of enterprises in the automotive industry. Assembly shops
OST 32.45-95: Noise. Pneumatic equipment of marshalling yards. Permissible noise levels
OST 32.97-87: Occupational safety standards system. Infrasound in the cabs of the operator of traction rolling stock of railways. Permissible levels and measurement methods
OST 36-100.2.03-84: Occupational safety standards system. Labour saving tools. Installation tools and devices. General safety and ergonomics requirements.
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
OST 64-7-472-83: Occupational safety standards system. Production processes of finished pharmaceutical products. Production of ampouled injections. Safety requirements.
POT R M-006-97: Intersectoral labor protection rules for cold metal processing
R 50-601-21-92: Recommendations. Establishment of product safety requirements in standards and technical conditions
RD 08-272-99: Safety requirements for drilling equipment for the oil and gas industry.
RD 12.23.102-85: Mountain cars. Method for establishing values of noise and vibration characteristics
RD 153-12.2-003-99: Ensuring noise and vibration safety at coal enterprises
RD 31.83.07-86: Occupational Safety and Health Management System - Recommended Practice for Reducing Noise Levels at Ship Repair Facilities Administered by the Ministry of the Merchant Marine
RD 34.02.310-89: Method for Tests of Atmospheric Steam Discharge Noise Silencers
SP 4043-85: Sanitary regulations for coal industry enterprises
STB 1208-2000: Construction and finishing machines. General safety requirements. Test methods
TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
