GOST 9.306-85

ГОСТ 9.306-85

Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

Единая система защиты от коррозии и старения. покрытия металлические и неметаллические неорганические. Обозначения.

Status: Valid - Supersedes

The standard establishes the designation of metallic and non-metallic inorganic coatings in the technical documentation.

Стандарт устанавливает обозначения металлические и неметаллические неорганических покрытий в технической документации.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 20

Approved: USSR State Committee for Standards, 1/24/1985

SKU: RUSS17072

Price: $222.27




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Standards for pipe fittings (TPA) » 10. Production » 10.7 Coatings »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating »

National standards » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.01 Surface treatment and coating in general »

National standards » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.01 Surface treatment and coating in general »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T9 Unified system of protection against corrosion and aging of materials and products » T90 Terms, classification, designations »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Unified system of protection against corrosion and aging of materials and products (ESZKS) »


As a Replacement Of:

GOST 21484-76: Metallic and non-metallic inorganic protective and decorative coatings. Classification. Symbols. Selection requirements

GOST 9.073-77: Unified corrosion and ageing protection system. Metal and non-metal inorganic coating. Types, thickness series and designations

The Document References:

GOST 21484-76: Metallic and non-metallic inorganic protective and decorative coatings. Classification. Symbols. Selection requirements

GOST 21930-76: Tin-lead solders in pigs. Specifications

GOST 21931-76: Tin-lead solders in the form of products. Specifications

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.304-84: Unified corrosion and ageing protection system. Metallizing coatings. Designations, technical requirements and methods of control

The Document is Referenced By:

GOST 10047-62: High speed steel cutting tools. Specifications

GOST 10223-82: Batch-weighing dispensers of discrete action, balance and batch-weighing dispensers of continuous action

GOST 10403-80: Constructional steel trowels. Technical requirements

GOST 10461-81: Shake-proof washers with teeth. General specifications

GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements

GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)

GOST 10512-78: Magnetic and electromagnetic separators. Specification

GOST 10512-93: Magnetic and electromagnetic separators

GOST 10580-2006: Technological foundry equipment. General specifications

GOST 10580-74: Foundry equipment. General specifications

GOST 10708-82: Pendulum impact machines

GOST 10774-80: Cylindrical pins with drilled ends. Specifications

GOST 10778-83: Spatulos. Specifications

GOST 10831-87: Paint rolls specification

GOST 11004-84: Principal ventilation mine blowers

GOST 11042-90: Construction steel hammers. Specifications

GOST 11098-75: Gauge callipers with reading arrangement. Specifications

GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements

GOST 11476-79: Control cash machines. Specifications

GOST 11648-75: Quick removable thrust washers. Specifications

GOST 11737-93: Hexagon socket screw keys. Specifications

GOST 11784-74: Rectangular finishing trowels. Design

GOST 11785-74: Finishing trowels for large foundry moulds and cores. Design

GOST 11786-74: Narrow-nosed finishing trowels. Design

GOST 11787-74: Tapered finishing trowels. Design

GOST 11788-74: Straight finishing beads. Design

GOST 11789-74: Shaped finishing beads. Design

GOST 11790-74: Finishing scoops with trowels. Design

GOST 11791-74: Finishing lancets. Design

GOST 11792-74: Finishing scoops with lancets. Design

GOST 11793-74: Straight finishing gaggers. Design

GOST 11794-74: Finishing gaggers with heel. Design

GOST 11795-74: Finishing gaggers with heel and lancet. Design

GOST 11868-75: Electric apparatus for floor railless electrified transport trucks. General technical specifications

GOST 12.4.081-80: Occupational safety standards system. Method of measuring volume of stream flow fed into hose means of individual protection

GOST 12189-66: Holding devices. Eccentric cams. Design

GOST 12190-66: Holding devices. Double eccentric cams. Design

GOST 12191-66: Holding devices. Forked eccentric cams. Design and sizes

GOST 12192-66: Holding devices. Two-sided face eccentric cams. Design

GOST 12193-66: Holding devices. Movable prisms. Design

GOST 12194-66: Holding devices. Adjusting prisms. Design

GOST 12195-66: Holding devices. Knife-edges. Design

GOST 12196-66: Holding devices. Fixed prisms. Design

GOST 12197-66: Holding devices. Side fixing prisms. Design

GOST 12198-66: Holding devices. Guiding shoes. Design

GOST 12199-66: Holding devices. Groove screws for tension springs. Design

GOST 12200-66: Holding devices. Eye-screws for tension spring. Design

GOST 12201-66: Holding devices. Quick detachable bolts for slots of machines. Design

GOST 12202-66: Holding devices. Screw plugs. Design

GOST 12203-66: Holding devices. Round blind nuts. Design

GOST 12204-72: Holding devices. High legs. Design

GOST 12205-66: Holding devices. Low legs. Design

GOST 12206-66: Holding devices. Fit shanks. Design

GOST 12208-66: Holding devices. Prismatic sliding assembled keys. Design

GOST 12209-66: Holding devices. Cylindrical locating pins of permanent type. Design

GOST 12210-66: Holding devices. Cut locating pins of permanent type. Design

GOST 12211-66: Holding devices. Cylindrical locating pins of changeable type. Design

GOST 12212-66: Holding devices. Cut locating pins of changeable type. Design

GOST 12213-66: Holding devices. Locating pins. Design

GOST 12214-66: Holding devices. Bushes for indexes and locating pins with bead. Design

GOST 12215-66: Holding devices. Bushes for indexes and locating pins. Design

GOST 12216-66: Holding devices. Spherical supports. Design

GOST 12217-66: Holding devices. Plugs for lubrication holes. Design

GOST 12218-66: Holding devices. Washers enlarges. Design and sizes

GOST 12219-66: Holding devices. Thread washers. Design

GOST 12458-67: Screws with bead. Design

GOST 12459-67: Strengthening bolts for machined slots. Design

GOST 12460-67: Nuts with lock screws. Design

GOST 12461-67: Nuts hexagonal high with acme thread. Design

GOST 12462-67: Nuts hexagonal with bead and acme thread. Design

GOST 12463-67: Pressure screws with star handle. Design

GOST 12464-67: Threaded bushes. Design

GOST 12465-67: Stop pins. Design and sizes

GOST 12466-67: Shackles with thread holes. Design and sizes

GOST 12467-67: Clamps for fixing devices. Design

GOST 12468-67: Eccentrics double-supported. Design

GOST 12469-67: Countersunk axles. Design

GOST 12470-67: Forks with thread holes. Design

GOST 12471-67: Levers cranked. Design

GOST 12472-67: Levers cranked, with two holes. Design

GOST 12473-67: Levers cranked, two-cam. Design

GOST 12474-67: Levers cranked with cam and slot. Design

GOST 12475-67: Levers cranked, two slot. Design

GOST 12476-67: Fork levers. Design

GOST 12477-67: Single-slot shackles. Design

GOST 12478-67: Two-slot shackles. Design

GOST 12479-67: High, permanent supports. Design

GOST 12480-67: Supports for pressure screws of clamps. Design

GOST 12481-67: Adjustable stays with ball headed. Design

GOST 12482-67: Rollers. Design

GOST 12483-67: Plungers. Design

GOST 12484-67: Hollow plungers. Design and sizes

GOST 12485-67: Handles with screw mounting. Design

GOST 12486-67: Handles with pin mounting. Design

GOST 12593-93: Metal cutting machine tools. Flanged spindle noses with swireluashers and flanges of fixtures. Basic and coupling dimensions

GOST 12595-2003: Metal-cutting machine tools. Flanged spindle noses of А type and flanges of fixtures. Basic and coupling dimensions

GOST 12595-85: Metal-cutting machine-tools. Flanged spindle noses of A type. Basis and coupling dimensions

GOST 12850-80: Cylindrical notched pins with engaged ends. Sizes and technical requirements

GOST 12937-67: Moveable flat grippers for machine retaining devices. Design and dimensions

GOST 12938-67: Moveable bent gripper for machine retaining devices. Design and dimensions

GOST 12939-67: Moveable stepped gripper for machine retaining devices. Design and dimensions

GOST 12940-67: Moveable fork grippers for machine retaining devices. Design and dimensions

GOST 12941-67: Bent clamps for machine retaining devices. Design and dimensions

GOST 12942-67: Universal bent clamps for machine retaining devices. Design and dimensions

GOST 12943-67: Washers for machine retaining device. Design and dimensions

GOST 12946-67: Overhead collar nut for machine retaining devices. Design and dimensions

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 13152-67: Bolts for machine slots. Design and dimensions

GOST 13153-67: Wedge clamps. Design and dimensions

GOST 13154-67: Floating clamps for machine retaining devices. Design and dimensions

GOST 13155-67: Bushes of tangential clamp for machine retaining devices. Design and dimensions

GOST 13156-67: Bushes of tangential clamps with thread hole for machine retaining devices. Design and dimensions

GOST 13157-67: Cone bushes for indexes of machine retaining devices. Design and dimensions

GOST 13158-67: Screw sprags built-in for machine retaining devices. Design and dimensions

GOST 13159-67: Adjustable jacks for machine retaining devices. Design and dimensions

GOST 13160-67: Fixing devices with retractable handle for machine retaining devices. Design and dimensions

GOST 13161-67: Bayonet type indexes for machine retaining devices. Design and dimensions

GOST 13162-67: Rack type indexes for machine retaining devices. Design and dimensions

GOST 13163-67: Rack type clips with tapered lock for machine retaining devices. Design and dimensions

GOST 13164-67: Pawls for drop plates of machine retaining devices. Design and dimensions

GOST 13165-67: Compression springs for machine retaining devices. Design and dimensions

GOST 13276-79: Overhead line hardware. General specifications

GOST 13427-68: Nuts with hole for handle for machine retaining devices. Design and sizes

GOST 13428-68: Dog point pressure screws for machine retaining devices. Design

GOST 13429-68: Pressure screws with point for foot for machine retaining devices. Design

GOST 13432-68: Pressure dog point screws with hole for handle for machine retaining devices. Design

GOST 13433-68: Pressure screws with hole for handle and point for foot for machine retaining devices. Design

GOST 13434-68: Hexagon head dog point pressure screws for machine retaining devices. Design

GOST 13435-68: Hexagon head pressure screws with point for foot for machine retaining devices. Design

GOST 13436-68: Feet for pressure screws for machine retaining devices. Design

GOST 13437-68: Feet increased for pressure screws for machine retaining devices. Design

GOST 13438-68: Spherical washers for machine retaining devices. Design

GOST 13439-68: Cone washers for machine retaining devices. Design

GOST 13440-68: Flat head rest buttons for machine retaining devices. Design

GOST 13441-68: Spherical head rest buttons for machine retaining devices. Design requirements

GOST 13442-68: Knurled head rest buttons for machine retaining devices. Design

GOST 13443-68: Jig rest buttons for machine retaining devices. Design

GOST 13444-68: Height ended fixtures for machine retaining devices. Design

GOST 13445-68: Angle fixtures for machine retaining devices. Design

GOST 13446-68: Angle ended fixtures for machine retaining devices. Design

GOST 13447-68: Movable handles for machine retaining devices. Design

GOST 13552-81: Driving toothed chains. Specifications

GOST 13567-78: Power-directional relays. General technical requirements

GOST 13649-79: Spring lugs for the wrist watch cases. Design and sizes

GOST 13781.2-77: Lead joints for 1; 6 and 10 kV power cables. Complete set of details and mounting materials. Specifications

GOST 13781.3-79: Couplings of for power cables with paper insulation for 20 and 35 kV Sets of parts and installation materials. Specification

GOST 13791-68: Tapered adapters 7:24 with end slot for cutters arbors. Design and dimensions

GOST 13896-68: Adjusting square countersunk headed screws. Design

GOST 13897-68: Check square countersunk headed screws with shortened cylindrical end. Design

GOST 1405-83: Pinch and wrenching steel bars. Specifications

GOST 14227-85: Dish washing machines

GOST 14227-97: Dish washing machines. General specifications

GOST 14229-78: Spring pins. Specification

GOST 14291-83: Document liquidation machines. General specifications

GOST 14724-69: Eye bolts. Design

GOST 14725-69: Eye bolts with acme-thread. Design

GOST 14726-69: Knurled nuts. Design

GOST 14727-69: Spherical and hexagon nuts. Design

GOST 14728-69: Four-armed nuts. Design

GOST 14729-69: Cylindrical countersunk nuts. Design

GOST 14730-69: Blocks for finished machine tool slots. Design

GOST 14731-69: Knurled head pressure screws. Design

GOST 14732-69: Sliding swing clamps shaped. Design

GOST 14733-69: Hook clamps. Design

GOST 14734-69: End washers. Design

GOST 14735-69: Swing clamps. Design

GOST 14736-69: Detachable clamps. Design

GOST 14737-69: Screw fixed sunk keys. Construction

GOST 14738-69: Stepped keys. Design

GOST 14739-69: Round keys. Design

GOST 14740-69: Dowels. Design

GOST 14741-69: Four armed handles. Design

GOST 14743-69: Hooks. Design

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 1523-81: Straight reamers

GOST 1532-81: Viscosimeters of relative viscosity. Specifications

GOST 15510-70: Removable nut stops with joint pin for boring bars and boring arbors. Design

GOST 15511-70: Back nuts for boring bars and boring arbors. Design

GOST 15512-70: Stop washer with inner joggle for boring bars. Design

GOST 1555-67: Plate thrusts for machine retaining devices. Design

GOST 1556-67: Screw type stop with wedge for machine retaining devices. Design

GOST 1559-67: Screw sprags for machine retaining devices. Design

GOST 1560-67: Screw ties for machine retaining devices. Design

GOST 15622-96: Safety slipping couplings. Parameters, design and dimensions

GOST 15987-91: Wooden bodied planes

GOST 16140-77: Collapsible racks. Specifications

GOST 16211-70: Centre cone arbors. Design and dimensions

GOST 16212-70: Cylindrical centre arbors. Design and dimensions

GOST 16488-70: Drivers for grinding. Design

GOST 16528-87: Rectangular magnetic plates

GOST 16549-2019: Cast iron plug-through cranes, coupling cast iron, for nominal pressure PN? 1.0 MPa (10 kgf / cm2) with a plug for draining water

GOST 16549-71: Sleeve type iron plug valves with gland and blind flange for drainage for Py <= 10 kgf/sq.cm

GOST 16561-76: Metal accessories for wood containers. Specifications

GOST 16840-78: Pinned wire. Design and dimensions

GOST 16894-71: Fixing bolts with head for plates. Design

GOST 16895-71: Fixing sheared bolts with head for plates. Design

GOST 16896-71: Flat bearers. Design

GOST 16897-71: Blade bearers. Design

GOST 16898-71: Fixing bolts with stop. Design

GOST 16899-71: Fixing sheared bolts with stop. Design

GOST 16900-71: Fixing cylindrical bolts. Design

GOST 16901-71: Fixing cylindrical sheared bolts. Design

GOST 17017-71: Carbide tools for making holes in building materials. Technical requirements

GOST 17166-71: Accessory tool for metal-cutting machines. General technical requirements

GOST 17199-88: Fitter’s screwdrivers

GOST 17200-71: Collette chucks for turret lathes. Design

GOST 17270-71: Frames for hand hack-saws. Specifications

GOST 17438-72: Pliers

GOST 17439-72: Adjustable pliers

GOST 17440-93: Sniper nose pliers

GOST 17564-85: Diamond needles

GOST 1757-76: Hoes. Specification

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 17767-72: Screw-in handles for plug-gauges and ring-gauges. Design and basic dimensions

GOST 18123-82: Washers

GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications

GOST 18176-79: Furniture of packing cases. Specifications

GOST 18355-73: Plain single-ended double-limit snap gauges for length over 10 to 360 mm. Design and dimensions

GOST 18356-73: Plain double-ended snap gauges for length over 10 to 360 mm. Design and dimensions

GOST 18578-89: Builders axes. Specifications

GOST 18707-81: Jumpers for protection of rocketry and space-rocketry items from static electricity

GOST 18714-81: Grounding wires for the protection of aerospace crafts from static electricity

GOST 18856-81: Apparatuses for inhalation anesthesia and artificial pulmonary ventilation

GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications

GOST 18981-73: Pipe toggle wrenches

GOST 19029-73: Closing up of ropes to thimble. Construction and dimensions

GOST 19030-73: Thimbles. Design and dimensions

GOST 19099-86: Lubricating systems

GOST 19119-80: Taper axially splitted pins. Specifications

GOST 19126-2007: Medical metallic instruments. General specifications

GOST 19126-79: Metallic medical instruments

GOST 19171-73: Adjustable holders for angled fastening of cutter for turret lathes. Design and dimensions

GOST 19191-73: Rigging screws with automatic stopping. Specifications

GOST 19259-73: Cutter for ceramic tiles

GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators

GOST 19681-83: Water mixing and distribution accessories for sanitary and laboratory applications. General technical requirements

GOST 19853-74: Lubricating plugs. Specifications

GOST 19913-74: Holders with a cylindrical shank for right-angle holding of a tool for turret-lathes. Design and dimensions

GOST 19914-74: Holders with a cylindrical shank for angled holding of a tool for turn-lathes. Design and dimensions

GOST 19915-74: Holders with a cylindrical shank for cutting-off bit tools for turret-lathes. Design and dimensions

GOST 2.310-68: Unified system for design documentation. Marking of designations of coverings, heat treatment and other types of treatment on engineering drawings

GOST 20062-96: Tractor seat

GOST 20493-75: Voltage detectors. General technical requirements

GOST 20493-90: Voltage detectors. General specifications

GOST 20494-75: Isolation bars operational and for grounding. General specifications

GOST 20746-84: Vice for precision machining

GOST 20783-81: Metal trays for wiring

GOST 20803-81: Metal boxes designed for electric wiring

GOST 20862-81: Adjusting fixturing hexahedral supports with threaded end and hole. Design and dimensions

GOST 20863-81: Adjusting fixturing rings supports with a flat, threaded end and hole. Design and dimensions

GOST 20864-81: Adjusting fixturing ring supports with slit, threaded end and hole. Design and dimensions

GOST 20865-81: Adjusting fixturing hexahedral supports with threaded holes. Design and dimensions

GOST 20866-81: Adjusting fixturing ring support with flats and threaded holes. Design and dimensions

GOST 20867-81: Adjusting fixturing ring with a slit and threaded holes. Design and dimensions

GOST 21028-75: Jigs for machining holes of moulding boxes and pattern plates. Specifications

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 21167-75: Machine bar centering vices with screw and lever. Design and main dimensions

GOST 21168-75: Machine bar centering vices with screw and prismatic jaws. Design and main dimensions

GOST 21239-93: Instruments for surgery. Scissors. General requirements and test methods

GOST 21240-89: Medical scalpels and knives

GOST 21424-93: Flexible couplings with rubber-bushed studs. Parameters and dimensions

GOST 21485-2016: Flushing tanks with accessories. General specifications

GOST 21485-94: Flushing tanks with accessories. General specifications

GOST 22045-89: Overhead travelling single-beam cranes. Specifications

GOST 22053-76: Woodcutting twist drills with centre and undercutters. Specifications

GOST 22057-76: Woodcutting twist drills. Technical conditions

GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications

GOST 22090.1-93: Dental rotary instruments. Part 1. Steel and carbide burs

GOST 22090.2-93: Dental rotary instruments. Part 2. Steel and carbide finishing burs

GOST 22224-83: Hand flat spring dynamometers. Specifications

GOST 2224-93: Steel eye rings for wire cables

GOST 22375-77: Dual-sided leaves fixed by screws and rivets. Design and sizes

GOST 22376-77: One-sided leaves fixed by screws and rivets. Design and dimensions

GOST 22473-77: Devices for fixing and securing the patterns on master pattern plates. Design and dimensions

GOST 22502-89: Condensing units with hermetic refrigeration compressors for commercial refrigeration machinery

GOST 22559-77: Shanks of press-moulds for pressure moulding of thermoset articles. Construction and dimensions

GOST 22560-77: Pushers of composite shanks for press-moulds for pressure moulding of thermoset articles. Construction and dimensions

GOST 22561-77: Tips of composite shanks for press-moulds for pressure moulding of thermoset articles. Construction and dimensions

GOST 22649-83: Medical air sterilizers

GOST 22742-77: Sets of square connectors fixture of radio electronic items. Specifications

GOST 22827-85: General purpose self-propelled boom cranes

GOST 23074-85: Fertilizer placers for liquid organic fertilizers

GOST 23106-78: Longitudinal screw cap couplings. Basic parameters. Design and dimensions

GOST 2310-77: Steel bench hammers

GOST 23173-78: Garden barrows. General technical conditions

GOST 2327-76: Switches, disconnectors and switches for currents from 25 to 6300 A and voltage up to 1000 V. General specifications

GOST 2327-89: Low-voltage switches, switch-disconnectors. General technical specifications

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23289-94: Waste water drain sanitary accessories. Specifications

GOST 23354-78: Threaded pipeline connections. Cut ring. Construction

GOST 23359-78: Threaded pipeline connections. Reinforced bushings. Construction

GOST 23410-78: Shield box viewing windows. Types, construction and dimensions

GOST 23411-84: Electronic cash registers

GOST 23469.0-81: Cable sleeves

GOST 23469.1-82: Copper connection sleeves for cables up to 10 kV. Construction and sizes

GOST 23469.3-79: Copper connection cable sleeves fastened by pressing. Construction and sizes

GOST 23469.4-83: Copper branch sleeves for cables up to 1 kV. Construction and dimensions

GOST 23484-79: Electrohydraulic-plants for removing of cores. Technical requirements

GOST 2361-74: Limiters for cases flap covers. Specifications

GOST 23707-95: Small tools for tillage

GOST 23708-84: Sets of floor equipment for poultry breeding and keeping

GOST 23785.1-2001: Cord fabric. Method for determination of breaking strength and elongations at rupture

GOST 23785.1-79: Cord fabric. Method for determination of the breaking strength and elongations

GOST 23833-95: Commercial refrigeration equipment

GOST 23932-79: Laboratory glassware and equipment. General technical requirements

GOST 23932-90: Laboratory glassware and equipment. General specifications

GOST 23981-80: Cable lugs

GOST 23982-85: Fertilizing machinery

GOST 24104-88: General purpose and reference laboratory balances

GOST 24145-80: Domestic containers for bread. General specifications

GOST 24246-80: Box clutches. Basic parameters. Design and dimensions

GOST 24246-96: Box clutches. Parameters, design and dimensions

GOST 24339-80: Portable multi-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions

GOST 24340-80: Portable single-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions

GOST 24341-80: Portable multi-impressions press moulds for manufacturing rubber-fabric carrier rings. Design and dimensions

GOST 24343-80: Portable single-impression press moulds for manufacturing rubber-fabric chevron collars. Design and dimensions

GOST 24344-80: Portable single-impression press moulds for manufacturing rubber-fabric locking rings. Design and dimensions

GOST 24345-80: Portable single-impression press-moulds for manufacturing rubber-fabric carrier rings. Design and dimensions

GOST 24360-2016: Shell and mills with inserted carbide teeth. Specifications

GOST 24360-80: Shell-type face mills with inserted carbide teeth

GOST 24474-80: Marking tools

GOST 24519-80: Sets of two-cassette press-moulds for manufacture of rubber toroidal sealing rings. Design and dimensions

GOST 24553-81: Bellows, metal, single-layer, compensatory, reinforced with rings. Specification

GOST 24568-81: Magnetic chucks. Specifications

GOST 24624-81: Hydraulic presses for gluing of soles to the footwear

GOST 24753-81: Contact terminals of electrical equipment

GOST 2491-82: Ow-voltage electromagnetic starters

GOST 24959-81: Gauges for splinted joints

GOST 24961-81: Plate double-end plug gauges with diameter from 14 to 98 mm. Design and dimensions

GOST 24962-81: Go plug gauges of not full form with diameter from 102 to 125 mm. Design and dimensions

GOST 24963-81: Not-go plug gauges of not full form with diameter from 102 to 125 mm. Design and dimensions

GOST 24964-81: Not-go snap-gauges for checking internal diameter of splined shafts with straight-sided profile when centering by D or b. Design and dimensions

GOST 24965-81: Double-end snap-gauges for checking internal diameter of splined shafts with straight-sided profile when centering by d. Design and dimensions

GOST 24966-81: Double-end snap-gauges for checking tooth thickness of splined shafts with straight-sided profile. Design and dimensions

GOST 25010-81: Howks for plastering. Specifications

GOST 25034-85: Screw contact terminals

GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 25595-83: Stocks for dies and square shank tools. Specifications

GOST 25605-83: Hand operated socket wrenches and drive parts

GOST 25727-83: Letter and digital hand stamps

GOST 2575-79: Thrust centres with nut screwed-off nut. Design

GOST 25782-90: Derbies, floats, semifloats. Specifications

GOST 25982-83: Stomatologic tips for a microdrive

GOST 26015-83: Lattices for medical X-radiography. General specifications

GOST 26161-89: Operating tables

GOST 26170-84: Non-destructive testing. Radio wave instruments. General technical requirements

GOST 26215-84: Hand-held wood-saws

GOST 26221-84: Scattering suppressing linear rasters for medical roentgen apparatuses

GOST 26251-84: Galvanium anodes for corrosion protection. Specifications

GOST 26346-84: Lighting buses for the ac voltage up to 660 v

GOST 26368-90: Medical light fixtures

GOST 26422-85: Clamps and opening limiter for aluminum alloy windows. Types and basic dimensions

GOST 26455-97: Semifixed disk couplings. Parameters, design and dimensions

GOST 26582-85: Food (manufacturing) industry machines and equipment

GOST 26596-2016: Face milling cutters with mechanically clamped indexable carbide inserts. Specifications

GOST 26596-91: Non-adjustable milling cutters

GOST 26613-2016: Lathe tools with mechanically clamped changeable indexable inserts. Specifications

GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates

GOST 26665-91: Metal bodied planes. Technical specifications

GOST 26665-97: Metal bodies planes. Specification

GOST 26862-86: Rins. General specifications

GOST 27310-87: Potato combines

GOST 27320-87: Expansive bolts. Construction

GOST 27590-2005: House-tube water-watered heat supply systems. General specifications

GOST 27590-88: Water heaters for heat supply systems

GOST 27597-88: Electronics items. Corrosion resistance evaluation method

GOST 27636-95: Stone extraction and processing equipment

GOST 27724-88: Drills with mechanical fixation of replaceable polyhedral plates

GOST 27735-94: Domestic scales

GOST 27788-88: Retention knobs for tool shanks with 7/24 taper design

GOST 27834-88: Tool joints for drill pipers. Specifications

GOST 27834-95: Tool joints for drill pipes. Specifications

GOST 27962-88: Industrial equipment

GOST 28037-89: Wire cutters

GOST 28131-89: Dentist` s chairs

GOST 28162-89: Means for putting protection covers on documents. General technical requirements

GOST 28241-89: Hand wise. Specification.

GOST 2832-77: Adjusting rings with screw fastening. Dimensions

GOST 2833-77: Spring rings for screw stoppering and grooves for them. Construction and dimensions

GOST 2838-80: Wrenches

GOST 28436-90: End mills with mechanically clamped insrtr tips

GOST 28438-90: Disk milling cutters with mechanically clamped many-sided hard-alloy inserts

GOST 28518-90: Medical chisels

GOST 28617-90: Metallic and non-metallic inorganic coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control

GOST 28778-90: Expansion bolt self-anchoring for building. Specifications

GOST 28912-91: Filters for stores and filters-separators. Technical specifications

GOST 28948-91: Laboratory tables for operation with radioactive substance. Specifications

GOST 29130-91: Protective decorative coating accessories for products of light industry. General requirements

GOST 29329-92: Balance for static weightings

GOST 30086-93: Jig bushes and accessories for drilling purposes. Dimensions

GOST 30414-96: Weighbridges for weighing of vehicles in motion. General technical requirements

GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods

GOST 3055-69: Ball head handles. Design

GOST 30894-2003: Production well head equipment. General technical requirements

GOST 31.0101.01-89: Hand wheels, rotating levers, handles, and knobs

GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements

GOST 31.1066.01-85: Attachments for metall-cutting machine tools. Central readjustable mandrels with corrugated bushings for precision machining. Basic parameters and dimensions

GOST 31.1066.02-85: Attachments for metall-cutting machine tools. Mandrels with split collets for precision machining. Basic parameters and dimensions

GOST 31.1066.03-97: Central arbors for exact operations

GOST 31.1066.04-97: Attachments for metal-cutting tools. Cam arbors. General specifications

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.

GOST 3130-77: Installation rings with pin mounting. Design and dimensions

GOST 31592-2012: Machine reducers. General specifications

GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements

GOST 32484.3-2013: High-strength structural bolting assemblies for preloading. System HR - Hexagon bolt and nut assemblies

GOST 32484.4-2013: High-strength structural bolting assemblies for preloading. System HV - Hexagon bolt and nut assemblies

GOST 32803-2014: Self-stressing concrete. General specifications

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33164.3-2014: Mining and tunneling equipment. Timbering, mechanized. Hydraulic control systems. Safety requirements and methods of testing

GOST 3385-69: Wing nuts. Desing

GOST 3449-84: Taps. Specifications

GOST 3699-82: Low voltoege protective voltageralays. General technical requirements

GOST 400-80: Glass thermometers for testing of petroleum products. Specifications

GOST 4045-75: Hand-operated bench vice

GOST 4046-80: Sine bars. Specifications

GOST 4084-68: Adjustable rests for machine retaining devices. Design

GOST 4085-68: Adjustable hexagon head rests for machine retaining devices. Design

GOST 4086-68: Adjustable round head rests for machine retaining devices. Design

GOST 4087-69: Quick-detachable washers. Design

GOST 4088-69: Fashioned nuts. Design

GOST 4090-69: Suspended washers. Construction

GOST 4153-93: Pruning shears

GOST 4154-93: Pruning shears

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4734-69: Swing clamp straps. Design

GOST 4735-69: Sliging clamp straps. Design

GOST 4736-69: Tiltable clamp straps. Design

GOST 4738-67: Forks with thread shanks. Design

GOST 4739-68: Ears for machine retaining devices. Design

GOST 4740-68: Adjustable forced rests for machine retaining devices. Design

GOST 4741-68: Thread ransitional bushes for machine retaining devices. Design

GOST 4743-68: Rest plates for machine retaining devices. Design

GOST 4860.1-83: Glands for for electric cables and wires

GOST 5006-83: Toothed clutches. Specifications

GOST 5147-80: Joint clutches. Basic parameters. Design and dimensions

GOST 5147-97: Joint couplings. Parameters, design and dimensions

GOST 5260-75: Cast iron handwheels for pipeline armature. Types, basic dimensions and technical requirements

GOST 5547-93: Engineer's and lineman's pliers. Specifications

GOST 5688-2015: Tools with carbide tips. Specifications

GOST 5688-61: Tools with carbide tips. Specifications

GOST 5808-77: Half-side and side-and-face milling cutters with inserted carbide blades. Techical specifications

GOST 6402-70: Lock washers. Specifications

GOST 6625-85: Mine local ventilating fans

GOST 7041-71: Fire snaphook

GOST 7193-74: Hand induction anemometer. Specifications

GOST 7210-75: Hand-held metal-cutting shears

GOST 7211-86: Cold chisels

GOST 7212-74: Cape chisels

GOST 7213-72: Center punches

GOST 7214-72: Bench piercers

GOST 7236-93: Flat-nose pliers. Specifications

GOST 7275-75: Adjustable wrenches

GOST 7283-93: Round nose pliers. Specifications

GOST 7328-82: General-purpose and reference mass gages

GOST 7413-80: Bridge overhead traveling cranes, single-girder suspension, general purpose. Specification

GOST 7498-75: Fire hydraulic elevator. Specifications

GOST 7890-84: Travelling single-girder suspended cranes. Specifications

GOST 7890-93: Travelling single girder suspended cranes. Specifications

GOST 7918-75: Tool joints for 50 mm diameter drilling pipes. Specifications

GOST 7921-86: Metal shot-gun cartridge-cases. Specifications

GOST 7945-86: Scoops for finishing works. Specifications

GOST 8107-75: Valves for pneumatic tubes and tyres with constant pressure. General specifications

GOST 8117-74: Ship's bells. Specifications

GOST 8390-84: Electro hydraulic presses for blocking

GOST 8709-82: Light boards for industrial and public buildings

GOST 8918-69: Hexagon nuts with bead. Design

GOST 8921-69: Swing handle nuts. Design

GOST 8922-69: Loaded screws (journals). Design

GOST 8923-69: Cylindrical handles. Design

GOST 8924-69: Levers with ball handles. Design

GOST 8925-68: Flat clearance gauges for machine retaining devices. Design

GOST 8926-68: Cylindrical clearance gauges for machine retaining devices. Design

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.304-87: Unified system of corrosion and ageing protection. Thermal sprayed coatings. General requirements and methods of control

GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production

GOST 9.313-89: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings on the plastics. General requirements and technological operations

GOST 9018-89: Fuel dispensing pumps. General specifications

GOST 9029-72: Fire turntable combined monitor

GOST 9047-69: Hook bolts. Construction

GOST 9048-69: Spherical head bolts. Construction

GOST 9049-69: Locking screws. Construction

GOST 9051-68: Hexagon socket dog point pressure screws for machine retaining devices. Design

GOST 9052-69: Shouldered screws. Design

GOST 9053-68: Rests plates for eccentrics and pressure screws for machine retaining devices. Design

GOST 9057-69: Double-sided swing clamp straps. Construction

GOST 9058-69: Sliding swing clamp straps. Construction

GOST 9059-69: Bushes for hook clamps straps. Construction

GOST 9060-69: Tiltable washers. Construction

GOST 9061-68: Round eccentric cams for machine retaining devices. Design

GOST 9062-89: Chaplets for iron and steel castings.

GOST 9244-75: Inside callipers graduated in 0,001 and 0,002 mm. Specifications

GOST 9321-73: Rollers. Specifications

GOST 9392-89: Levelling squares and bars. Specifications

GOST 9413-78: Lighting panels for dwelling-houses. General specifications

GOST 9416-83: Building levels. Technical requirements

GOST 9500-84: Portable standard dynamometers

GOST 9515-81: Piston metal rings for piston compressors. Specifications

GOST 9533-81: Trowels, tuck pointing tools. Specifications

GOST 9650-80: Pins. Specifications

GOST 9688-82: Ring cable thimbles fastened by swaging. Design and dimensions

GOST 9696-82: Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications

GOST 9923-80: Manual fire barrel. Specifications

GOST ED1 21482-87: Single - layer measuring metal bellows. Specifications

GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements

GOST R 50059-92: Travelling single-girder suspended cranes. Specifications

GOST R 50072-92: Multiple slip joint pliers. Specifications

GOST R 50300-92: Turning tools with indexable inserts of superhard materials. Specifications

GOST R 50302-92: Regrindale superhard material (composite) tipped cartridges for toolholders. Specifications

GOST R 50803-2008: Food processing machinery. Tanks for cooling and storage of milk in milk-trade farms and reception stations. Technical requirements and safety parameters

GOST R 50803-95: Refrigerated bulk milk tanks. General requirements

GOST R 50891-96: Machine reducers. General specifications

GOST R 50892-96: Elastic couplings with a toroid-shape shell. Specifications

GOST R 50895-96: Toothed clutches. Specifications

GOST R 51115-97: Fire equipment. Fire turntable combined monitors. General technical requirements. Test methods

GOST R 51163-98: Thermodiffusion zinc coatings on fasteners and other small products. General requirements and control methods

GOST R 51177-2017: Overhead line hardware. General technical requirements

GOST R 51177-98: Overhead line hardware. General specifications

GOST R 51243-99: Razor systems for damp shave. General specifications

GOST R 51763-2001: Well sucker rod pump drives. General technical requirements

GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications

GOST R 52644-2006: Hexagon bolts for high-strength structural bolting with large width across flats. Specifications.

GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.

GOST R 52646-2006: Washers for high-strength bolts metal structures. Specifications.

GOST R 52787-2007: Hinge and pliers tools. Technical requirements

GOST R 52868-2007: Cable tray systems and cable ladder systems for cable management. General technical requirements and test methods

GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements

GOST R 53196-2008: Jewellery. Gold alloy coatings

GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements

GOST R 53819-2010: Vehicles. Fastenings wheels. Technical requirements and test methods

GOST R 53844-2010: Vehicles. Fine filters of oil for automobile, tractor and combine engines. Technical requirements and test methods

GOST R 53935-2010: Screwdrivers for fitting and assembling for recessed screws and wood screws. General technical requirements, methods of control and tests

GOST R 54488-2011: Adjustable wrenches. Specifications

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 55158-2012: Mining equipment. Haulage and shunting mining winches. General technical requirements and test methods

GOST R 55525-2017: Storage systems. Adjustable pallet racking. General specifications

GOST R 55613-2013: Non-destructive inspection. Measure - reference for thickness gauges of coverings. General principles

GOST R 55622-2013: Complex security systems. Hydraulic gun carriage trunks with Remote control. General technical requirements

GOST R 57381-2017: Storage systems. Hand loaded steel static shelving. General specifications

GOST R 57981-2017: Hexagon socket screw keys. Specifications

GOST R 58280.1-2018: Medical Products. Equipment for thermal disinfection / disposal of medical waste. The method of dry hot air. Part 1. General requirements

GOST R 58280.2-2018: Medical Products. Equipment for thermal disinfection / disposal of medical waste. Dry hot air method and saturated water vapor method. Part 2. Control and test methods

GOST R 58361-2019: The main pipeline transport of oil and oil products. Welding equipment. General specifications

GOST R 58409-2019: Unpackaged complete distribution devices for voltage up to 35 kV for traction and transformer substations of the railway. General specifications

GOST R 58514-2019: Building levels. Technical conditions

GOST R 58515-2019: Trowel, shovels and cuts. Technical conditions

GOST R 58517-2019: Paint rollers. Technical conditions

GOST R 58518-2019: Steel construction hammers. Technical conditions

GOST R 58519-2019: Rules, graters and graters. Technical conditions

GOST R 58863-2020: Production tables. Metal workbenches. General specifications

GOST R 58864-2020: Tool cabinets made of metal. General specifications

GOST R 58873-2020: Marine instrument glands for single electric cables input. Specifications

GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods

GOST R 9.318-2013: Unified system of corrosion and ageing protection. Nanostructure non-metallic inorganic coatings formed by microarc oxidation on aluminium and its alloys. General requirements and methods of control

NPB 159-97*: Fire fighting equipment. Fire monitors combined. General technical requirements. Test methods

OST 13-158-83: Wooden returnable and reusable furniture container. Technical specifications.

OST 26-07-1203-85: Pipeline fittings. Electrolytic, chemical and diffusive coating. Technical requirements.

OST 26-07-2038-81: Electromagnetic valves. Double-terminal plate. Design and main dimensions. Technical requirements.

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 34-13-016-88: Self-tapping bolts. Design and dimensions. Technical requirements

OST 34-13-017-88: The rivet is combined. Design and dimensions. Technical requirements

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

OST 92-9440-81: Conducting lacquer coating. Technical requirements and typical technological processes.

PI 249-2000: Riveting of metal structures. application

R 50.1.001-94: Multilevel printed boards. Design and use

R 50-127-92: Recommendations. The designs are the basic carriers of radio-electronic means. Restrictive list of types of coatings

RD 22-207-88: Lifting machines. General requirements and production standards

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 39-013-90: Instructions for pipe drill usage.

RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries

RD 50-708-91: The leading document on standardization. Instruction. Printed-circuit plates. Requirements to designing.

RST RSFSR 131-87: Metal folding beds. Technical conditions

RST RSFSR 328-89: Metal stationery cabinets. General technical requirements

RST RSFSR 45-86: Sledge for children. Technical conditions

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 605-89: Folding knives. General technical conditions

RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions

RST RSFSR 736-86: Crutches and Canes. Technical Specifications

RST RSFSR 778-91: Filling stations. General technical requirements

SP 445.1325800.2018: Culverts and drainage systems in permafrost areas. Design rules

SP 96.13330.2016: Ferrocement structures

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

ST TsKBA 042-2008: Pipe fittings. Electrolytic, chemical, anodic and diffusion coatings

STB 1679-2006: Cultivators for inter-row tillage. General specifications

TU 2-034-439-88: Prisms testing and marking with one prismatic recess and overlay type P1

TU 2296-009-01297858-2005: Shelter protective cuff sealing

TU 24-00.10.019-88: Two-line manual lubricating station. Technical conditions

TU 2531-005-01297858-2000: Sealing cuffs for pipelines over roads and railways laid in a protective case (casing)

TU 2531-007-01297858-02: Rubber-sealing cuffs for pipelines over roads and railways, laid in a protective case (casing)

TU 4218-003-17416124-99: Connection box for electrical wiring. Technical conditions

TU 4833-002-08558606-95: Metal shielding of the PML type

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Noxious substances. Classification and general safety requirements
Language: English
Price: $32.67
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Language: English
Price: $233.64
Manufacturing and quality control of steel structures for construction
Language: English
Price: $183.15
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Steel structures
Language: English
Price: $594.00
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!