imgalt

GOST 12.2.010-75

ГОСТ 12.2.010-75

Occupational safety standards system. Pneumatic Hand Machines. General safety requirements

Система стандартов безопасности труда. Машины ручные пневматические. Общие требования безопасности

Status: Effective. The limitation of effectiveness has been lifted: Decree of the State Standard No. 123 dated 02/07/92

The standard applies to manual pneumatic machines and establishes general safety requirements for the design and operation of machines, as well as requirements for methods for monitoring their noise characteristics and vibration parameters. The standard does not apply to special machines designed to work in special conditions.

Стандарт распространяется на ручные пневматические машины и устанавливает общие требования безопасности к конструкции и эксплуатации машин, а также требования к методам контроля их шумовых характеристик и вибрационных параметров. Стандарт не распространяется на специальные машины, предназначенные для работы в особых условиях.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 11/28/1975

SKU: RUSS17090

Price: $34.65



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.140 Hand tools » 25.140.10 Pneumatic tools »

National standards » 25 MECHANICAL ENGINEERING » 25.140 Hand tools » 25.140.10 Pneumatic tools »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »

National Standards for OKSTU » CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS » Rules for acceptance, use, operation and repair. Safety engineering »

National Standards for OKSTU » CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS » Construction and finishing machines, construction and assembly tools, manual and mechanized »


The Document References:

GOST 12.1.026-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in a free-field over reflecting plane. Engineering method

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.030-83: Manual machines. Noise characteristics. Norms. Control methods

GOST 12.3.001-85: System of labor safety standards pneumatic drives

GOST 12.3.028-82: Processes of treatment materials by abrasive and borazon tools

GOST 12633-90: Hand-held pneumatic rotary machines

GOST 17770-86: Manual machines

The Document is Referenced By:

GOST 12.2.037-78: Fire engineering. Safety requirements

GOST 12.2.042-2013: Occupational safety standards system. Machines and technological equipment for live-stock-raising and forage production. General safety requirements

GOST 12.2.042-91: Occupational safety standards system. Machines and technological equipment for livestock raising and forage production.

GOST 12.2.135-95: Equipment for processing of meat and poultry farming products

GOST 12.3.027-2004: Foundry work. Safety requirements

GOST 12.3.027-81: Occupational safety standards system. Foundry work. Safety requirements

GOST 12.3.027-92: Foundry work

GOST 12.3.028-82: Processes of treatment materials by abrasive and borazon tools

GOST 12633-90: Hand-held pneumatic rotary machines

GOST 14294-75: Pneumatic hand shears and nibblers. Specifications

GOST 22.9.01-97: Safety in emergencies. Emergency and rescue tools and equipment. General technical requirements

GOST 32406-2013: Diamond and cubic boron nitride tools. Safety requirements

GOST R 22.9.01-95: Safety in emergencies. Emergency and rescue tools and equipment. General technical requirements

GOST R 52588-2006: Abrasive tools. Safety requirements

GOST R 52588-2011: Abrasive tools. Safety requirements

GOST R 55161-2012: Mining equipment. Borers mining hand pneumatic. Safety requirements and methods of testing

GOST R 55162-2012: Mining equipment. Pneumatic hammers. Safety requirements and test methods

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines (Sections 15-23. Appendices 1-11)

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization

MU 3927-85: Guidelines for the sanitary supervision of the design, release of manual machines and the working conditions of workers in vibration-hazard professions

MU OT RM 02-99: Assessment of the safety of workplaces for their certification of working conditions

OST 24.207.01-90: Pipeline fittings. Casting from cast iron and colour alloys. General specifications.

OST 36-100.2.03-84: Occupational safety standards system. Labour saving tools. Installation tools and devices. General safety and ergonomics requirements.

OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.

POT R M-002-97: Intersectoral rules on labor protection in foundry

POT R M-006-97: Intersectoral labor protection rules for cold metal processing

POT R M-027-2003: Intersectoral rules on labor protection in road transport

POT R O-001-2002: Rules on labor protection for printing organizations

POT R O-13153-TsSh-877-02: Industry rules for labor protection during maintenance and repair of signaling, centralization and blocking devices on federal railway transport

POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering

POT R O-14000-003-98: Rules for labor protection in the manufacture of boiler work and metal structures

POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery

POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport

POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive

POT RZhD 4100612-TsSh-074-2015: Rules for labor protection during maintenance and repair of signaling, centralization and blocking devices at Russian Railways

PPBO-157-90: Fire Safety Regulations in the Timber Industry

RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface

RD 31.81.01-87: Safety requirements for inland and mixed navigation and marine equipment.

RD 32-CSR-110/34-03: Guidance document. Labor protection during the operation of buildings and structures and the repair and construction work at railway facilities

RD 34.03.204: Safety rules when working with tools and accessories

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

SNiP 12-03-99: Occupational safety in construction part one. General safety requirements

SP 325.1325800.2017: Buildings and construction. Rules for the production of demolition and recycling

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements

VSN 9-94: Flooring Guidelines for Residential and Public Buildings

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
imgalt
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
imgalt
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
imgalt
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
imgalt
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
imgalt
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
imgalt
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
imgalt
Chemical production safety passport. General requirements
Language: English
Price: $90.09
imgalt
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Containers for blood and its components. Requirements for chemical and biological safety and methods of testing
Language: English
Price: $251.46
imgalt
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
imgalt
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
imgalt
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
imgalt
Guidelines for gas chromatographic measurement of the content of cyclohexanone and cyclohexanol in the swabs on the skin
Language: English
Price: $478.01
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!