imgalt

GOST 1215-79

ГОСТ 1215-79

Malleable iron castings

Отливки из ковкого чугуна

Status: Superseded in part. general casting specifications

The standard applies to ductile iron castings made of white iron and subjected to heat treatment to obtain the necessary mechanical properties and microstructure consisting of ferrite and pearlite in various proportions and carbon annealing.

Стандарт распространяется на отливки из ковкого чугуна, изготовленные из белого чугуна и подвергнутые термической обработке с целью получения необходимых механических свойств и микроструктуры, состоящие из феррита и перлита в различных соотношениях и углерода отжига.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 9/14/1979

SKU: RUSS17096

Price: $101.00

English keywords: cast iron and steel castings;


imgalt

The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 10. Production » 10.2 Billets (forgings, stampings, rolling, castings, etc.) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.80 Cast iron and steel castings »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.80 Cast iron and steel castings »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V8 Casting of various metals » V81 Cast iron (gray and ductile iron) »

National Standards for OKSTU » PRODUCTS FOR GENERAL ENGINEERING APPLICATIONS » Casting (castings) iron »


As a Replacement Of:

GOST 1215-59: Malleable iron castings. Technical requirements

The Document References:

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12345-88: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 1497-84: Metals. Methods of tension test

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 26358-84: Pig iron castings

GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.

GOST 27208-87: Cast iron casting. Methods of mechanical testing

GOST 27809-88: Steel and cast iron. Methods of spectroorganic analysis

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 3212-80: Gated patterns. Molding slopes

GOST 3212-92: Gated patterns. Pattern tapers, core prints, dimensional tolerances

GOST 3443-87: Cast iron castings with graphite of different form. Methods of structure determination

GOST 9012-59: Metals. Method of Brinell hardness measurement

The Document is Referenced By:

GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw

GOST 1142-90: Horse-driven load carriages. Specifications

GOST 11471-72: Gate valves flanged from malleable cast iron with a cap on the thread for ammonia for Pd approximately 2.5 MPa (25 kgf / cm2). Technical conditions

GOST 12393-77: Fittings for overhead system of electric railways. General specifications

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 14286-69: Wrenches for fire connecting equipment. Specifications

GOST 16959-80: Metal cast boxes for wirings. General specifications

GOST 18162-72: Shut-off valves made of malleable iron for Pd approximately 1.6 MPa (16 kgf / cm2). Specification

GOST 18163-72: Flanged stop valves from malleable iron for Pd approximately 2.5 and 4 MPa (25 and 40 kgf / cm2). Specification

GOST 19388-74: Fixing cramps for split core boxes. Design and dimensions

GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications

GOST 19777-74: Fingers for cutter bars of agricultural machines. Specification

GOST 19879-74: Carbide tipped machine taps for pipe cylindrical thread. Specifications

GOST 20365-74: Broaches round of variable cutting of diameters from 14 to 90 mm. Design and dimensions

GOST 2216-84: Adjustable smooth snap gauges

GOST 22966-78: Cast fixing cramps for moulding boxes. Construction and dimensions

GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications

GOST 2593-2009: Coupling air brake hoses for railway rolling stock. Specifications

GOST 2593-2014: Hose connections for railway rolling stock. Specifications.

GOST 2593-82: Coupling air brake hoses for railway rolling stock. Specifications

GOST 26358-84: Pig iron castings

GOST 27208-87: Cast iron casting. Methods of mechanical testing

GOST 3032-76: Fly nuts. Construction and dimensions

GOST 31311-2005: Heating devices. General specifications

GOST 31374-2009: Connection brake pipe with electrocontact 369A. Specifications

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 34504-2018: Automotive vehicles. Jacks are mechanical. Technical requirements and test methods

GOST 3496-74: Knife clips and adjusting plafes for cutter bars of agricultural machines

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 4624-70: Equipment for horizontal tanks for petroleum products. Ventilating tip

GOST 5260-75: Cast iron handwheels for pipeline armature. Types, basic dimensions and technical requirements

GOST 6127-52: Bath valves. Technical requirements

GOST 7496-84: Beet harvesters

GOST 8556-72: Portable wood fire ladders

GOST 8944-75: Ductile iron and steel fittings with parallel thread for pipelines. Technical requirements

GOST 9653-74: Indicators of the liquid level at Pd up to 4 MPa (40 kgf / cm2). Specification

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests

GOST R 53678-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 2. Cracking-resistant carbon and low-alloy steels and the use of cast irons

GOST R 53822-2010: Vehicles. Hydraulic jacks. Technical requirements and test methods

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

Manual: Manual for impulse and low consumption fire extinguishing systems

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 102-002-88: Machines, tools and equipment for pipeline construction. Designing and manufacturing.

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 22-207-88: Lifting machines. General requirements and production standards

RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface

RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.21.543-88: Model Guidelines for Operation of Hydraulic Structures for Process Water Supply Systems of Thermal Power Stations

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

Resolution: Rules for the design and safe operation of steam and hot water boilers

RTM 26-07-187-75: Casting of parts of pipe fittings of radius of curvature and casting transitions. Wall thickness

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!