GOST 2216-84
ГОСТ 2216-84
|
|
Adjustable smooth snap gauges
Калибры -скобы гладкие регулируемые
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to smooth two-limiting caliber brackets with one-sided adjustment, designed to control shafts up to 340 mm in diameter with tolerances for ESPD and EST system.
Стандарт распространяется на гладкие двупредельные калибры-скобы с односторонней регулировкой, предназначенные для контроля валов диаметром до 340 мм с допусками по ЕСПД и системе ОСТ.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
3/26/1984
SKU: RUSS17145
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G2 Industrial tools and accessories »
G28 Measuring tools »
National Standards for OKSTU »
TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS »
Calibers »
As a Replacement Of:
GOST 2216-68: Flat clamps, regulated
The Document References:
GOST 1215-79: Malleable iron castings
GOST 13168-67: Preservation of metal products
GOST 1435-54: Carbon tool steel. Specification
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 21401-75: Plain limit gauges for dimensions up to 500 mm. Required dimensions
GOST 24853-81: Plain gauges for dimensions to 500 mm. Tolerances
GOST 2789-59: Surface roughness
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2991-61: Boxes, wooden, not dismountable. Types. Dimensions of parts. General technical requirements
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3882-67: Hard cermet alloys. Types
GOST 3882-74: Sintered hard alloys. Types
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9569-65: Paraffin paper
GOST 9569-79: Paraffin paper
GOST 977-88: Steel castings. General specifications
OST 1205*: Gauges working for holes of 2a accuracy class and for shafts and holes of 3 and 3a accuracy classes. Allowances
OST 1219: Limit gauges for smooth shafts and holes of 5th class of accuracy. Allowances
OST 1220: Limit gauges for smooth shafts and holes of 4th class of accuracy. Allowances
OST NKM 1221: Ultimate smooth calibers for shafts and holes of the 8th and 9th classes of accuracy. Tolerances
The Document is Referenced By:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions
GOST 11068-81: Electric-welded pipes from corrosion-resistant steel
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel
GOST 11310-2012: Chrysotiles cement pipes and couplings. Acceptance rules and test methods
GOST 11310-90: Asbestos cement pipes and couplings. Methods of test
GOST 12766.3-90: Precision gauged alloys of high electric resistance
GOST 12766.4-90: Graded rolled stock of precision alloys of high electrical resistance
GOST 13877-96: Sucker rods and sucker rod couplings. Specifications
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14955-77: Quality round steel with a special surface finish
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 17432-72: Powder material M-MP alloy Forgings and Rods. Specifications
GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 22343-2014: Clamp of indirect rail fastening of railway. Specifications
GOST 22343-90: Clamp for indirect rail fastening of railways. Specifications
GOST 28393-89: PM bars and strips of high-speed steel. General specifications
GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications
GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4543-71: Structural alloyed steel
GOST 5267.0-90: Hot-rolled sections for car building. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 8142-89: Rail soles for R18, P24, P33 rail types
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 9941-2022: Cold-deformed seamless pipes made of corrosion-resistant high-alloy steels. Technical conditions
GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C
GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications
GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications
GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications
GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
MI 1927-88: Recommendation. Calibers are smooth for cylindrical shafts and holes
TU 14-2-767-88: Hot-rolled steel strip with improved quality. Technical conditions
TU 14-3-1428-86: Electric-Welded Straight-Seam Steel Pipes 1020 mm in Diameter for Gas and Oil Pipelines. Technical Specifications
TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision
TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines
TU 14-3-1972-97: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions
TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.