imgalt

GOST 982-80

ГОСТ 982-80

Transformer oils

Масла трансформаторные

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1834 of 11.28.91

The standard applies to transformer oils of sulfuric acid and selective refining, produced from low-sulfur oils and used to fill transformers, oil switches and other high-voltage equipment as the main insulating material.

Стандарт распространяется на трансформаторные масла сернокислотной и селективной очисток, вырабатываемые из малосернистых нефтей и применяемые для заливки трансформаторов, масляных выключателей и другой высоковольтной аппаратуры в качестве основногоэлектроизоляционного материала.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 11/24/1980

SKU: RUSS17231

Price: $64.00



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 030/2012 TR CU. On requirements for lubricants, oils and special fluids » Regulations and standards (to 030/2012 TR CU) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.100 Lubricants, industrial oils and related products »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.100 Lubricants, industrial oils and related products »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B4 Petroleum products for industrial and domestic consumption » B47 Oils for various purposes »

National Standards for OKSTU » OIL, PETROLEUM PRODUCTS, GAS » Lubricating oils »


As a Replacement Of:

GOST 5.1710-72: Transformer oil T-750. Quality requirements for certified products

GOST 982-68: Transformer oil. Technical requirements

The Document References:

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 17711-80: Cast copper-zinc alloys (brass)

GOST 17711-93: Cast copper-zink alloys (brass). Grades

GOST 19296-73: Petroleum oils. Test for soda reaction from petroleum oils. Photoelectric colorimeter method

GOST 20284-74: Petroleum products. Method for determination of colour on colorimeter ЦНТ

GOST 20287-91: Petroleum products Method of test for flow point and pour point

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 2917-76: Oils and additives. Method of test for corrosion influence on metals

GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity

GOST 3900-85: Petroleum and petroleum products. Method for determination of density

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5985-79: Petroleum products. Method for determination of acidity and acid number

GOST 6307-75: Petroleum products. Method of test for water-soluble acids and alkalies

GOST 6356-75: Petroleum products. Method of test for flash point boy closed cup

GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures

GOST 6581-75: Liquid electrical insulating materials. Electric test methods

GOST 859-2001: Copper. Grades

GOST 981-75: Mineral oils. Method for determination of oxidation stability

The Document is Referenced By:

GOST 10589-2016: Moulding polyamide 610. Specifications

GOST 10589-87: Moulding polyamide 610. Specification

GOST 10693-81: Hermetic capacitor bushings designed for rated voltages 110 kv and more

GOST 11110-2022: CYATIM-202 grease. Technical specifications

GOST 11110-75: Grease ЦИАТИМ-202. Specifications

GOST 11945-78: Vulcanized fibre tubes. Specifications

GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements

GOST 12.4.168-85: Occupational safety standards system. Polymers means for protection of hands. Method for determination of petroleum and petroleum products penetration

GOST 12020-2018: Plastics. Testing methods of plastics resistance to chemical substances

GOST 12769-85: Electrical insulating crepe paper. Specifications

GOST 12855-77: Rubber sheet for transformers. Specifications

GOST 13525.13-69: Paper. Methods for determination of greaseproofness

GOST 1425-93: Lief springs for railway rolling stock. Technical requirements

GOST 14340.8-69: Enameled round winding wires. Method of the solvent-, oil- and water resistance test

GOST 14613-83: Fibreboard. Specifications

GOST 15030-78: Varnish KФ-965. Specifications

GOST 16336-2013: Polyethylene compositions for cable industry. Specifications

GOST 16336-77: Polyethylene compositions for cable industry. Specifications

GOST 16337-2022: High-pressure polyethylene. Technical specifications

GOST 16337-77: High-pressure polyethylene. Specifications

GOST 16338-85: Low-pressure polyethylene. Specifications

GOST 17310-2002: Gases. Picknometric method for determination of density

GOST 17310-86: Gases. Picknometric method for determination of density

GOST 17432-72: Powder material M-MP alloy Forgings and Rods. Specifications

GOST 17478-95: Moulding materials. Measuring glass-fibre-base laminate and granulated glass-fibre-base laminate. Specifications

GOST 17544-85: General purpose power oil transformers of voltage classes 220, 330, 500 and 750 kv

GOST 17545-72: Three-phase power oil transformers of general purpose, voltage class 330 kV. Specification

GOST 17546-72: Three-phase power oil transformers of general purpose, voltage class 150 kV. Specification

GOST 1790-2016: Wire made of chromel alloy T, alumel, copes and constantan for thermoelectrodes of thermoelectric converters. Specification

GOST 1790-77: Wire made of chrome, aluminum, copper and constantan alloys for thermo electrodes of thermo-electric converters

GOST 1791-2014: Wire of nickel and copper-nickel alloys for extending wires for the thermoelectric converters. Specifications.

GOST 1791-67: Wire from nickel and copper-nickel alloys for extension leads to the thermoelectric transducers.

GOST 19034-82: Tubes of polyvinylchloride plastic. Specifications

GOST 19459-87: Injection moulding polyamide copolymers. Specifications

GOST 20437-89: Moulding material AГ-4. Specifications

GOST 21338-75: Knurled-head screws. Technical requirements

GOST 22387.2-2014: Combustible natural gases. Methods for determination of hydrogen sulphide and mercaptan sulphur

GOST 22666-2016: Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications

GOST 22666-77: Copper and copel alloy wire for low-temperature thermocouples

GOST 22782.1-77: Explosion-protective electrical equipment

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications

GOST 23862.2-79: Rare-earth metals and their oxides. Direct spectral method of determination of impurities in oxides of rare-earth elements

GOST 23951-80: Antiseptic preparation ПБT. Specifications

GOST 24709-2022: Enamels EP-140. Specifications

GOST 24709-81: Enamels ЭП-140. Specifications

GOST 26191-84: Oils, lubricants and special fluids. Limited list and order of application

GOST 26246.0-89: Foil-clad electrical insulating materials for manufacture of printed plates. Test methods

GOST 26996-86: Polypropylene and copolymers of propylene. Specifications

GOST 28066-89: Ssi liquid chamber meters

GOST 28804-90: Moulding phenol materials. General specifications

GOST 28985-91: Rocks. Method of determination of deformation characteristics under uniaxial compression

GOST 30180.2-99: Paper cellulosic for electrical purposes. Part 2. Methods of test

GOST 30852.7-2002: Explosionproof electrical apparatus. Part 6. Oil-filled enclosures o

GOST 31945-2012: Flexible cables and cords for underground and open mining operations. General specifications

GOST 33798.1-2016: Electric equipment for rolling stock. Part 1. General service conditions and general rules

GOST 33798.2-2016: Railway applications. Electric equipment for rolling stock. Part 2. Electrotechnical components. General rules

GOST 4194-88: Electro insulating cardboard for transformers and apparatuses filled with oil

GOST 5689-79: Phenolic moulding compound. Specifications

GOST 5702-75: Process lubricant SP-3

GOST 5-78: Constructive textile and asbestos laminates. Specification

GOST 5960-72: Flexible PVC for insulation and protective jackets of wires and cables. Specifications

GOST 6465-76: Enamels PF-115. Specifications

GOST 687-78: Ac breakers for the voltage exceeding 1000 v

GOST 7338-90: Rubber and rubber-fabric sheets. Specifications

GOST 7822-75: Petroleum oils. Method of dissolved water determination

GOST 8.111-74: The state system for ensuring the uniformity of measurements. Dead-weight compound pressure and vacuum gauges, МВП-2,5 type. Verification methods and means

GOST 8.451-81: State system of ensuring the uniformity of measurements. Positive displacement liquid meters. Methods and means for verification

GOST 8291-83: Back pressure piston gages

GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity

GOST 8608-79: Porcelain pin support insulators for voltage above 1000 V. General specifications

GOST 8608-96: Porcelain pin support insulators for voltage above 1000 V. General specifications

GOST 8773-2022: CYATIM-203 grease. Technical specifications

GOST 8773-73: Grease ЦИАТИМ-203. Specifications

GOST 8774-75: Lithium. Specifications

GOST 9.712-86: Unified system of corrosion and ageing protection. Adhesives. Test methods of adhesive bonds of rubber with rubber-fabric materials and metals for resistance to the influence of liquid aggressive media

GOST 9014.0-75: Round wood

GOST 9219-88: Traction electrical devices

GOST 9219-95: Electrical draft gears. General specifications.

GOST 9359-80: Urea-formaldehyde and melamine-formaldehyde moulding materials (aminoplasts). Specifications

GOST 9391-80: Sintered Hard metals. Methods for determination of porosity and microstructure

GOST MEK 60641-2-2006: Pressboard and press paper for electrical purposes. Part 2. Methods of tests

GOST R 50.05.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Magnetic particles examination

GOST R 51330.7-99: Explosion-proof electrical apparatus. Part 6. Oil-filled "o" enclosures

GOST R 51559-2022: Power oil transformers of 110 and 220 kV voltage classes and autotransformers of 27,5 kV voltage class for AC traction railway power supply systems. General specifications

GOST R 51777-2001: Cables for installations of submersible electric pumps. General specifications

GOST R 52279-2004: Hydraulic dampers for railway rolling stock. General specifications

GOST R 52372-2005: Flexible cables and cords for underground and open mining operations. General specifications

GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications

GOST R 52719-2007: Power transformers. General specifications

GOST R 53842-2010: Automobile engines. Spark plugs. Technical requirements and test methods

GOST R 55016-2012: General-purpose 110 and 150 kW power oil transformers. Specifications

GOST R 55190-2012: Metal-enclosed switchgear for rated voltages up to and including 35 kV. General specifications

GOST R 55190-2022: Complete metal-enclosed switchgear (GIS) for rated voltage up to 35 kV. General specifications

GOST R 55882.1-2013: Electric equipment for rolling stock. Part 1. General service conditions and general rules

GOST R 55882.2-2013: Railway applications. Electric equipment for rolling stock. Part 2. Electrotechnical components. General rules

GOST R 57659-2017: The railway transport objects testing methods of prolongation operating cycle. Part 1. Power transformers and auto transformers for railway power substations, transform substations and power supply linear devices

GOST R 58115-2018: Converter transformers for voltages from 6 to 110 kV for railway traction substations. General specifications

MI 1267-86: Guidelines. Ultrasound Transducers Prize-D11. Method of verification

MI 1272-86: Guidelines. Thickness gauge ultrasonic UT-93P. Method of verification

MI 1744-87: State system for ensuring uniformity of measurements. Thermoelectric temperature transducers of platinum-platinum-platinum exemplary type PPO. Method of verification

MI 2203-92: Recommendation. State system for ensuring uniformity of measurements. Test methods for measuring pressure. Datasheets

MI 2591-2000: Recommendation. State system for ensuring uniformity of measurements. Density transducers in-line firms "Те sоlа-Тrоon eleсТонісорор ЛТD" (United Kingdom). Method of verification

MI 2868-2004: State system for ensuring uniformity of measurements. Compression meters showing. Method of verification

MI 3001-2006: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters in-line models 7827 and 7829 from Solartron Mobrey Limited. Dynamic mode calibration technique

MI 3029-2007: State system for ensuring uniformity of measurements. Viscometers of the firm "Sol-Mon Money Limited". Method of verification

MI 3120-2008: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Method of calibration

MI 3121-2008: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Calibration method

MI 3302-2010: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Calibration method

MI 571-84: Guidelines. Ultrasonic flaw detector UD2-12 (2.1). Method of verification

NB ZhT TsT 04-98: Electric locomotives. Safety standards

OST 36-76-83: Non-destructive testing. Welded joints of pipelines and structures. Colour method.

OST 37.002.1153-86: Typical technological process sealing isolation and braiding at the ends of electrical wires. Main provisions.

P 902-94/AO: Guidelines for taking environmental protection requirements into account when designing the oil facilities of hydropower plants and PSPs

PNAE G-7-015-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Magnetic particle inspection

PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection

PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Applications

PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)

RD 112 RSFSR-023-89: Guidelines. GSE. Capacity technological pipelines. Measurement Technique

RD 13-05-2006: Methodical recommendations on the procedure for conducting magnetic particle inspection of technical devices and structures used and operated at hazardous production facilities

RD 13-06-2006: Guidelines for the procedure for capillary control of technical devices and structures used and operated at hazardous production facilities

RD 153-34.0-04.202-98: Procedural Guidelines. Certification of Departments of Energy Facilities Performing Quantitative Chemical Analysis. Organization and Procedure

RD 22-205-88: Ultrasonic flaw detection of welded joints of lifting machines. Main provisions.

RD 26-11-87: Instructions on acoustic methods for monitoring the structure and mechanical characteristics of gray and high-strength cast irons

RD 27.05.01-2017: Guidance document for the repair and maintenance of wheelsets with axleboxes for freight cars of 1520 (1524) mm track gauge main railways

RD 34.01.203: Model Index of Operations Documentation for Chemical Shop of a Thermal Power Station

RD 34.10.354-88: Transformers Consumption of materials for repair

RD 34.17.440-96: Procedural Guidelines for Assessment of Individual Service Life of Steam Turbines and Prolongation of Their Operational Life Beyond the Individual Service Life of Steam Turbines and Prolonging Their Operational Life Beyond The Equipment Service Life

RD 34.43.105-89: Procedural Guidelines for Use of Transformer Oils

RD 34.43.201-88: Standard instruction on quality control and use of import transformer oils

RD 34.45-51.300-97: Electrical equipment testing scope and standards.

RD 34.46.503: Model Guidelines for Operation Oil-Filled Bushing at Voltage of 110-750 kV

RD 34.47.603-79: Guidelines for the overhaul of high-voltage three-pole circuit breakers VMPE-10

RD 34.47.605-78: Guidelines for the overhaul of the oil switch VMG-10-630-20 and VMG-10-1000-20

RD 34.47.612-86: Guidelines for the overhaul of VT-35-630-10VI and VTD-35-630-10VI oil circuit breakers

RD 34.47.613-74: Guidelines for the overhaul of the oil circuit breaker VMP-10P

RD 34.47.615-75: Manual overhaul of the oil circuit breaker VMK-110-2000-12, 5 VI

RD 39-0147103-378-87: Guidelines for Repair of Prestressed Reinforced Concrete Cylindrical Petroleum Tanks

RD 39-0147103-390-87: Guidelines. Flow vibration meter. Method of verification

RD 50-416-83: Methodological instructions. Glass capillary sample viscometers. Methods and means of verification.

RD 51-553-94: Instructions for technical certification of gas accumulators GSS-1-1-10,0-25U-001 during the operation of gas filling stations of gas compressor stations (AGNKS)

RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements

RD ROSEK-003-97: Hoisting machines. Magnetic particle control. Key Points

RD ROSEK-004-97: Hoisting machines. Capillary control. Key Points

SO 34.09.114-2001: Guidelines for quality control of solid, liquid and gaseous fuels for the calculation of specific fuel consumption at thermal power plants

SP 485.1311500.2020: Fire protection systems. Automatic fire extinguishing installations. Norms and rules of design

ST RK 1647-2007: Railway transport. Magnetic particles method of non-destructive control of car parts

TU 34-38-20121-87: Oil inlets. General technical conditions for major repairs

TU 34-38-20216-84: Transformers (and autotransformers) power oil general purpose 110 - 330 kV. Technical conditions for major repairs

TU 38 0051166-98: Rubber compounds for the rubber products of aircraft

TU 6-14-1009-79: Magnetic Black Powder

TU 95 1613-01: Polyethylene heat shrink tubes. Technical conditions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Metals. Methods of tension test
Language: English
Price: $469.00
imgalt
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English
Price: $134.00
imgalt
Natural gas for industrial and municipal purposes. Technical conditions
Language: English
Price: $267.00
imgalt
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English
Price: $1,126.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!