GOST 14637-89

ГОСТ 14637-89

Thick sheet rolled stock of normal quality carbon steel

Прокат толстолистовой из углеродистой стали обыкновенного качества

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)

The standard applies to hot-rolled plates of carbon steel of ordinary quality, manufactured with a width of 500 mm and more, with a thickness of 4 to 160 mm incl.

Стандарт распространяется на толстолистовой горячекатаный прокат из углеродистой стали обыкновенного качества, изготовляемый шириной 500 мм и более, толщиной от 4 до 160 мм включ.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: USSR State Committee for Product Quality and Standards Management, 12/22/1989

SKU: RUSS17244

Price: $47.52




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » Certification »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Wire »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V2 Carbon steel of ordinary quality (ordinary stock) » V23 Sheets and Stripes »


As a Replacement Of:

GOST 14637-79: Rolled thick-plate and wide-band universal of carbon steel for general use. Specification

The Document References:

GOST 14019-2003: Metallic materials. Bend test method

GOST 14192-96: Cargo marking

GOST 1497-84: Metals. Methods of tension test

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 26877-91: Metal products

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 380-2005: Common quality carbon steel. Grades

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-81: Rolled stock and products for further treatment

GOST 7566-94: Metal products

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

The Document is Referenced By:

ATK 24.202.09-2004: Shell-and-tube heat exchangers with a floating head and U-tubes, doubled. Main dimensions

ATK 24.202.10-2007: Album typical designs. Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell. Blocks. Main dimensions

ATK 24.218.01-90: Bosses, Plugs, and Gaskets. Design, Dimensions, and General Technical Specifications

ATK 24.218.04-90: Liquid mesh filters for pipelines. Design, dimensions and dimensions

ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 11474-76: Bent-steel sections. Specifications

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 16561-76: Metal accessories for wood containers. Specifications

GOST 16818-85: Sand mould intended to produce the sample blanks for testing the mechanical properties of flaky graphite grey cast iron

GOST 18514-73: End caps for rolling bearing blocks. Technical requirements

GOST 18576-96: Non-destructive testing. Railway rails. Ultrasonic testing methods

GOST 18579-79: Lifting devices of middle size freight containers with rating to 6 ton for general and specific cargoes. Specifications

GOST 19281-2014: High strength rolled steel. General specification

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds

GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications

GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment

GOST 2224-93: Steel eye rings for wire cables

GOST 23092-78: Sectional pallet box for topographical maps. Specifications

GOST 23120-2016: Stairways, marching, platforms and fences of steel. Specification

GOST 23478-79: Form for monolithic concrete and reinforced concrete structures erection. Classification and general technical requirements

GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications

GOST 26686-96: Flat car backtone railroad bore 1520 mm gauge. General technical specifications

GOST 26725-97: Freight gondolas for main lines with the track 1520 mm. General specifications

GOST 26804-2012: Metal road safety barriers. Specifications

GOST 26804-86: Metal road safety barriers. Specifications

GOST 27590-2005: House-tube water-watered heat supply systems. General specifications

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 28186-89: Brake shoes for motor car of rolling stock. Specifications

GOST 3.1118-82: Unified system for technological documentation. Forms and rules for filling in the technological process cards

GOST 3.1123-84: Unified system for technological documentation. Forms and rules for drawing up documents used in setting of proper rates of material consumption

GOST 3.1402-84: Unified system for technological documentation. Forms and rules of making documents on technological processes of material laying-out

GOST 3.1404-86: Unified system of technological documentation. Forms and rules of making documents on technological processes and cutting operations

GOST 30245-2003: Steel bent closed welded square and rectangular section for building constructions. Specifications

GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications

GOST 30249-97: Cast iron brake blocks for locomotives. Specifications

GOST 30482-97: Electroslag welding of steels. Requirements for technological process

GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31402-2009: Brake cylinders for railway rolling stock. General specifications

GOST 31402-2013: Brake cylinders for railway rolling stock. General specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33535-2015: Connections and crossings of railway tracks. Specifications

GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications

GOST 33762-2016: Products and systems for the protection and repair of concrete structures. Requirements for injection-sealing compounds and seals of cracks, cavities and clefts

GOST 33796-2016: Railway multiple units. Durability and dynamics requirements

GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements

GOST 34329-2017: Formworks. General specifications

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34387-2018: Side bearings of the freight wagon bogies. General specifications

GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions

GOST 5521-86: Weldable steel for shipbuilding

GOST 5521-93: Shipbuilding rolled steel

GOST 6713-75: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 7511-73: Steel sections for window and lantern transoms and window panels of industrial buildings. Specifications

GOST 82-70: Universal hot-rolled steel wide strips. Dimensions

GOST 8568-77: Corrugated steet rhombic and lentil form steel. Technical requirements

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 9570-2016: Box and pestpallets. General specifications

GOST R 51110-97: Equipment for bank protection. General technical requirements

GOST R 51223-98: Equipment for bank protection. Sluices for transfer of values. General specifications

GOST R 51224-98: Equipment for bank protection. Doors and manholes. General specifications

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52085-2003: Formworks. General specifications

GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions

GOST R 52212-2004: Shooting-galleries. Armoured protection and technical resistance to burglary. General technical requirements

GOST R 52392-2005: Brake cylinders for railway rolling stock. General specifications

GOST R 52400-2005: Air reservoirs for railway brakes. General specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications

GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 53700-2009: Non-destructive testing. Magnetic particle testing. Part 3: Equipment

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification

GOST R 55908-2013: Floors. Method of the covering slipperiness evaluation

GOST R 56354-2015: Cold formed sheet piling of non alloy steels. Specifications

GOST R ISO 11003-2-2017: Adhesives. Determination of shear behaviour of structural adhesives. Part 2. Tensile test method using thick adherends

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

L8-198.000: Weld bend supports. Working drawings

L8-508-524: Supports and suspensions of pipelines Dn less than 89 mm. Working drawings

MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes

ODM 218.6.004-2011: Guidelines for road safety ensuring rope guardrails

OST 108.030.45-82: Tubular air heaters for stationary boilers. General Specifications.

OST 108.275.39-80: Bodies of pipe supports of thermal and nuclear power plants. Design and dimensions.

OST 108.275.40-80: Bodies of pipe supports of thermal and nuclear power plants. Design and dimensions.

OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.

OST 153-34.0-1001-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension mounting block. Design and dimensions

OST 153-34.0-1001-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Block of hang fastening. Design and dimensions.

OST 153-34.0-1002-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Gasket Design and dimensions

OST 153-34.0-1002-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The laying. Design and dimensions.

OST 153-34.0-970-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 2.5 MPa (25 kgf/cm2). Sleeve for passage through the ceiling. Design and dimensions

OST 153-34.0-970-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 2,5 MPa. The plug for passage through the ceiling. Design and dimensions.

OST 153-34.0-972-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 1.6 MPa (16 kgf/cm2). Support welded sliding, directing and motionless. Design and dimensions

OST 153-34.0-972-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 1,6 MPa. The support is welded and sliding, guide rail and fixed. Design and dimensions.

OST 153-34.0-976-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 2.5 MPa (25 kgf/cm2). Shells welded sliding supports, guides and fixed. Design and dimensions

OST 153-34.0-976-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure no more than 2,5 MPa. The holder of the welded and sliding, guide rail and fixed supports. Design and dimensions.

OST 153-34.0-977-99A: Assembly units and support parts for station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Plates guides. Design and dimensions

OST 153-34.0-977-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The guide rail plates. Design and dimensions.

OST 153-34.0-978-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Housings for clamp clamping, guides and fixed. Design and dimensions

OST 153-34.0-978-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The holders of the saddles, sliding, guide rails and fixed supports. Design and dimensions.

OST 153-34.0-980-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Pillows and stops. Design and dimensions

OST 153-34.0-980-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Pads and fixed stops. Design and dimensions.

OST 153-34.0-991-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block with an earring. Design and dimensions

OST 153-34.0-991-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The hang block with a clip. Design and dimensions.

OST 153-34.0-993-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit with crosshead. Design and dimensions

OST 153-34.0-993-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The hang block with the cross bar. Design and dimensions.

OST 153-34.0-997-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Cover plate. Design and dimensions

OST 153-34.0-997-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The lining pad. Design and dimensions.

OST 153-34.0-999-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Paw with lining for the suspension of vertical pipelines. Design and dimensions

OST 153-34.0-999-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Clamp with lining pad for hang of vertical pipelines. Design and dimensions.

OST 2 KP97-I-75: Forge and press machines. Location and execution of support points for installation on anti-vibration mounts

OST 2 КП97-I-75: Machinery forging and pressing. Location and preparation of support places for installation on vibration isolators

OST 24.030.45-74: Air heaters tubular steam stationary boilers. General technical conditions

OST 24.125.103-01: CHP and NTPP pipeline suspensions. Links. Design and dimensions.

OST 24.125.104-01: CHP and NTPP pipeline suspensions. Lugs. Design and dimensions.

OST 24.125.110-01: CHP and NTPP pipeline suspensions. Crossbeam. Design and dimensions.

OST 24.125.111-01: CHP and NTPP pipeline suspensions. Suspension spring units. Design and dimensions.

OST 24.125.112-01: CHP and NTPP pipeline suspensions. Support spring units. Design and dimensions.

OST 24.125.116-01: CHP and NTPP pipeline suspensions. Clamp units with cross-bar. Design and dimensions.

OST 24.125.121-01: CHP and NTPP pipeline suspensions. Support beams with lugs. Design and dimensions.

OST 24.125.122-01: CHP and NTPP pipeline suspensions. Spring clamp suspensions on support beam. Design and dimensions.

OST 24.125.153-01: Fixed and sliding welded supports for thermal and nuclear power plants piping. Design and dimensions.

OST 24.125.154-01: Slide bearings for pipelines thermal and nuclear power plants. Design and dimensions.

OST 24.125.157-01: Guiding plates for CHP plants and nuclear thermal power plant pipeline supports. Design and dimensions.

OST 24.125.161-01: Roller casing for thermal and nuclear power plants pipeline supports. Design and dimensions.

OST 24.125.162-01: Support plates for CHP plants and nuclear thermal power plant pipeline supports. Design and dimensions.

OST 24.125.164-01: Intermediate support plates for CHP plants and nuclear thermal power plant pipeline suspensions. Design and dimensions.

OST 24.125.166-01: Spring units for supporting pipelines of CHP plant and nuclear thermal power plant. Design and dimensions.

OST 24.125.170-01: Details and prefabricated units of supports, hangers, ties for lens compensators and drives for remote control of pipe fittings in thermal and nuclear power plants. General Specifications.

OST 24.838.16-74: Gold washing apparatuses. Main parameters and dimensions. Technical requirements

OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.

OST 26.260.460-99: Lobes, locks and pads. Design, dimensions and general technical requirements.

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements

OST 26-02-2053-79: Adapter and hatches made of double-layer steel. Technical requirements .

OST 26-04-0393-72: Air separation plants. Thermal bridges for internal fittings. Design and dimensions

OST 26-04-1035-74: Assembling units and fastening details of cold pipelines with a diameter from 100 to 1020 mm. Design and dimensions.

OST 26-04-2384-79: Transportation plugs for working P 0 MPa (0 kg/cm2). Design and dimensions.

OST 26-04-2385-79: Transportation plugs for working P 0 MPa (0 kg/cm2), working P 0.04 MPa (0.4 kg/cm2). Design and dimensions.

OST 26-04-2387-79: Steel plugs to test vessels and apparatus for Py 0.1 MPa (1 kg/cm2), Py 0.6 MPa (6 kg/cm2). Design and dimensions.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 26-2015-83: Hinge and tilt-up Devices for manhole covers of welded steel of vessels and apparatuses. Technical requirements .

OST 26-2091-93: Horizontal support vessels and equipment. Design.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements

OST 34-10-475-89: Captivating welded and casted plates for turbo-units. Welded support. Design and dimensions.

OST 34-10-730-93: Suspension unit with eye bar. Design and dimensions.

OST 34-10-732-93: Suspension unit with cross head. Design and dimensions.

OST 34-10-733-93: Lug with lining. Design and dimensions.

OST 34-10-736-93: Clip for vertical pipelines. Design and dimensions.

OST 34-10-737-93: Supporting beams. Design and dimensions.

OST 34-10-738-93: Support with a plate. Design and dimensions.

OST 34-10-740-93: Units of spring attachment. Design and dimensions.

OST 34-10-743-93: Spring unit. Design and dimensions.

OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-10-752-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-10-753-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-10-764-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

OST 35-09-86: Hoisting machinery and equipment. General specifications.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-26-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (≈ 25 kg/cm2). General technical requirements.

OST 36-58-81: Steel building structures. Welding. Basic requirements.

OST 37.002.0444-77: Assembly units and fastening parts of overhead conveyors to the supporting metal structures. Construction and dimensions

PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations

PB 09-592-03: Rules for arrangement and safe operation of refrigerating systems

PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants

PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements

PGVU 242-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round single-lens compensator for gas and air ducts

PGVU 243-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round double compensator for gas and air ducts

PGVU 244-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Three-way round compensator for gas and air ducts

PGVU 245-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Four-sided round compensator for gas and air ducts

PGVU 246-92: Compensator, rectangular single lens for gas and air ducts

PGVU 247-92: Compensator, rectangular two-lens for gas and air ducts

PGVU 248-92: Three-slip rectangular compensator for gas and air ducts

PGVU 249-92: Four-sided rectangular compensator for gas and air ducts

PNST 309-2018: Roads are public. Bridges and pipes road. Technical requirements

PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 22-207-88: Lifting machines. General requirements and production standards

RD 24.030.142-88: Methodological instructions. Selection of steel products for construction of stationary boilers.

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 34.40.601-97: Procedural Guidelines for Inspection of Hot Water Storage Tanks

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 36-62-00: Hoisting equipment. General technical requirements.

RD RTM 26-14-02-78: Materials

RM 4-150-92: Process automation systems. Integrated norms of consumption of materials and products

RTM 26 123-73: Calculation of forces on the rolls of three- and four-roll plate bending machines

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units

SO 003-02495342-2006: Floors. Methods for assessing the slipperiness of floor coverings

SP 101-34-96: Set of rules for construction of trunk pipelines (SPSMG). Code of practice for selection of pipes for the construction of trunk gas pipelines. RAO "Gazprom", 11/15/90

SP 102.13330.2012: Hydraulic tunnels

SP 16.13330.2011: Steel structures

SP 294.1325800.2017: The construction of steel. Design rules

SP 34-101-98: Selection of pipes for main oil pipelines during construction and repair

SP 369.1325800.2017: Fixed offshore platforms. Design principles

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

SP 53-102-2004: General rules for steel structure design

ST RK 1278-2004: Road restrictions systems. Metal safety barriers. Specification

ST RK 1358-2005: Pressure vessels. Requirements for welding steels

ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure

ST RK 1643-2007: Freight cars cast iron brake shoes. Specification

ST RK 1667-2007: Materials of construction for the body of passenger cars and multiple units. Technical requirements and testing methods

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications

TU 102-529-89: Mobile buildings (inventory) of the block-containers of the panel construction of the Neftegazstroy system

TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions

TU 14-105-465-82: Hot-rolled plate steel, heat-treated 14G2AF. Pilot batch

TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines

TU 14-2-369-79: Rolled metal sheets, broadband universal and shaped carbon steel with a differentiated level of mechanical properties. Pilot batch

TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines

TU 14-3-1698-2000: Steel electric-welded longitudinal pipes with a diameter of 1020, 1220 mm for gas and oil pipelines

TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines

TU 14-3-808-78: Spiral-welded electrowelded carbon steel pipes 20 for pipelines of nuclear power plants

TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions

TU 1469-006-01297858-02: Specifications cold bending curves from steel electric-welded pipes with diameters of 720-1020 mm with insulating coating for main pipelines

TU 146930-08-01297858-05: Specifications for cold bending curves from steel electric-welded pipes with diameters of 530 and 1220 mm with insulating coating for main pipelines

TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing

TU 26-02-753-83: Shell-and-tube heat exchangers made of titanium with increased thermal efficiency. Technical conditions

TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions

TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 36-2009-77: Steel structures of steel vertical cylindrical tanks with a capacity from 100 to 20,000 m3 for the storage of oil and oil products. Technical conditions

TU 36-2287-80: Bent closed welded square and rectangular profiles

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type

TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions

TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal

TU 5262-001-23083253-96: Expanded steel sheets. Technical conditions

TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

GOST 10935-2019: Cargo freight cars. General specifications

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV

Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures

Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial

OST 153-34.0-971-99A: Assembly units and support parts of the station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Sleeve for passage through the roof. Design and dimensions

OST 153-34.0-987-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit with support beam. Design and dimensions

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 34.47.603-79: Guidelines for the overhaul of high-voltage three-pole circuit breakers VMPE-10

Resolution: Rules for the design and safe operation of steam and hot water boilers

SNiP 2.05.03-84*: Bridges and pipes (Appendices 1-20)

SNiP 2.05.03-84*: Bridges and pipes (Appendices 21-29)

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 414.1325800.2018: Fixed formwork. Design rules

SP 445.1325800.2018: Culverts and drainage systems in permafrost areas. Design rules

SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa

TU 36-26-11-5-89: Expanded steel sheets. Technical conditions

TU 3680-001-04698606-04: Pipe Support

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16
Degrees of protection provided by enclosures (IP Code)
Language: English
Price: $195.03

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!