GOST 21204-97

ГОСТ 21204-97

Industrial gas burners. General technical requirements

Горелки газовые промышленные. Общие технические требования

Status: Effective - Supersedes. IUS 12-1997

The standard applies to gas industrial burners operating on gaseous fuels burned with air, as well as to the gas part of the combined burners used in power plants (industrial and heating boilers and heat generators) and process units. The standard does not apply to burners for steam power boilers of power plants; burners, in which additional means (electrical or acoustic energy, oxygen) are used to intensify the combustion process; radiation pipes; burners that produce combustion products that are used as a controlled atmosphere; infrared burners; burners, which are an integral part of gas-using equipment for domestic use and catering; burner open-hearth furnaces, glass bath furnaces; torches of torch installations for burning of waste gases.

Стандарт распространяется на газовые промышленные горелки, работающие на газообразном топливе, сжигаемом с воздухом, а также на газовую часть комбинированных горелок, применяемых в энергетических установках (промышленных и отопительных котлах и теплогенераторах) и технологических агрегатах. Стандарт не распространяется на горелки для паровых энергетических котлов электростанций; горелки, в которых для интенсификации процесса горения применяют дополнительные средства (электрическую или акустическую энергию, кислород); радиационные трубы; горелки, при работе которых образуются продукты сгорания, используемые в качестве контролируемой атмосферы; горелки инфракрасного излучения; горелки, являющиеся составной частью газоиспользующего оборудования для использования в быту и предприятиями общественного питания; горелки мартеновских печей, ванных стекловаренных печей; горелки факельных установок для сжигания сбросных газов.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Russian Federation for Standardization, Metrology and Certification, 9/17/1997

SKU: RUSS17245

Price: $152.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 27 Power and heat engineering »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 016/2011 TR CU. On safety of gaseous fuel machines » Regulations and standards (to ТР ТС ТС 016/2011) »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.060 Burners. Boilers » 27.060.20 Gas burners »

National standards » 27 ENERGY AND HEATING TECHNOLOGY » 27.060 Burners. Boilers » 27.060.20 Gas burners »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G40 Classification, nomenclature and general rules »

National Standards for OKSTU » CHEMICAL AND PETROLEUM ENGINEERING » Gas-consuming industrial equipment »


As a Replacement Of:

GOST 21204-83: Gas burners. Classification. General requirements, marking, and storage

The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.028-80: System of the standards for safety of work

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 12997-84: SSI Products. General specifications

GOST 14192-96: Cargo marking

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 17356-89: Gas, oil fuel and combined burners. Terms and definitions

GOST 20548-87: Heating hot-water boilers with heating outputs

GOST 20548-93: Water heating boilers with power rating up to 100 kW. General specifications

GOST 21204-83: Gas burners. Classification. General requirements, marking, and storage

GOST 27570.0-87: Safety of household appliances and similar devices

GOST 28193-89: Natural-circulation stationary steam boilers with steam capacity of less than 4 ton / hour

GOST 28269-89: High-power stationary steam boilers

GOST 6211-81: Conical pipe thread. Profile, basic dimensions and tolerances

GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST R 50591-93: Gas-consuming thermal units. Industrial gas-burners. Limiting concentration rates of NOx in combustion products

GOST R 50831-95: Boiler plant. Heat-mechanical equipment. General technical requirements

GOST R 51383-99: Automatic forced draught burners for gaseous fuels. Technical requirements, safety requirements and test methods

GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane

GOST R 51842-2001: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods

PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.

The Document is Referenced By:

Decision 86: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, as a result of which, on a voluntary basis, compliance with the requirements of the technical regulations of the Customs Union "On the safety of devices operating on gaseous fuel" (TR CU 016 / 2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards containing rules and methods of research (testing) and measurements, including sampling rules necessary for the application and fulfillment of requirements technical regulations of the Customs Union "On the safety of devices operating on gaseous fuel" (TR CU 016/2011) and the implementation of conformity assessment of objects of technical regulation

GOST 15588-2014: Polystyrene insulating slabs. Specifications

GOST 15588-86: Polystyrene foam boards. Specifications

GOST 23.212-82: Products wear resistance assurance. The method of testing materials for wear under shock under law temperature conditions

GOST 28680-90: Gas burners for industrial furnaces. Series of nominal heat outputs

GOST 29134-97: Industrial gas burners. Test methods

GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.

GOST 31766-2012: Monofloric honeys. Specifications

GOST 31848-2012: Industrial gas-using equipment. Air heaters. General techniсal requirements

GOST 31849-2012: Industrial gas-using equipment. Air heaters with air-flue gases mixing. General technical requirements

GOST 31850-2012: Automatic forced draught burners for gaseous fuels. Technical requirements, requirements of safety and test methods

GOST 32028-2012: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods

GOST 32483-2013: Beekeeping products. Method for determination of ash mass fraction

GOST 34597-2019: Anode grounding of installations of electrochemical protection against corrosion of underground metal structures. Methods for determining the biocorrosive aggressiveness of soils and their impact on underground metal structures

GOST R 50670-94: Industrial gas-using equipment. Air heaters. General technical requirements

GOST R 50942-96: Industrial gas-using equipment. Air heaters. Test methods

GOST R 51383-99: Automatic forced draught burners for gaseous fuels. Technical requirements, safety requirements and test methods

GOST R 51625-2000: Industrial gas-using equipment. Air heaters with air-flue gases mixing. General technical requirements

GOST R 51842-2001: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods

GOST R 52097-2003: Production of beekeeping. Mineralisation of samples for determination of toxic elements

GOST R 52229-2004: Ignition control devices. General specifications

GOST R 52451-2005: Monofloric honeys. Specifications

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 54829-2011: Heating boilers with forced draught burners, with nominal heat output not exceeding 10 MW and maximum operating temperature of 150 °C

GOST R 56149-2014: Bee products. Atomic absorption method for determination of the mineral composition

GOST R 56459-2015: Fire extinguishing devices with thermosetting micro capsulation outgassing extinguishing composition. General technical requirements. Test methods

GOST R 56633-2015: Bee products. Atomic absorption method for determination of arsenic

GOST R 56634-2015: Bee products. Atomic absorption method for the determination of toxic elements

GOST R 56635-2015: Bee products. Determination of mercury by atomic absorption spectrometry cold vapour

GOST R 57817-2017: Underground gas storage. Design standards

Manual: Manual for impulse and low consumption fire extinguishing systems

Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety

OST 153-39.3-051-2003: Gas-distribution system technical maintenance. Main regulations. Gas-distribution network and gas equipment. Tank and balloon plants

R 50-605-97-94: Energy conservation. Gas air heater. Specifications for heat energy consumption

RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.

RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities

RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants

RD 3688-00220302-003-04: The leading document. Pipe heating furnaces. Requirements to design, production and operation.

SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.

SP 253.1325800.2016: High-rise buildings utilities

SP 281.1325800.2016: Boiler rooms integrated in building by general power to 360 kW. Rules of planning and device

SP 373.1325800.2018: Independent heat supply sources. Design rules

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

SP 89.13330.2012: Combustion boiler systems of heating generation

SP 89.13330.2016: Boiler installations

ST RK GOST R 50670-2008: Industrial gas-using equipment. Air heaters. General technical requirements

TSN 41-311-2004 MO: Autonomous heat sources

VRD 39-1.12-012-2000: Index of Standards Developed by Gazprom OAO Organizations and Facilities

VSN 2-93-81: Instructions for heat treatment of precast concrete and reinforced concrete products by natural gas combustion products

Customers Who Viewed This Item Also Viewed:

Ball valves and disk gate valves. End-to-end (face-to-face) dimensions
Language: English
Price: $28.00
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $58.00
Industrial gas burners. General technical requirements
Language: English
Price: $152.00
Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
Language: English
Price: $177.00
Straight and diamond knurl. Form and basic dimensions
Language: English
Price: $76.00
Industrial gas burners. Test methods
Language: English
Price: $204.00
Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
Language: English
Price: $142.00
White sugar. Specifications
Language: English
Price: $279.00
Pipeline valves. Methods of control and testing
Language: English
Price: $246.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Pipeline valves. Leakage rates of valves
Language: English
Price: $175.00
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $104.00
Graphite electrodes and nipples. Specifications
Language: English
Price: $279.00
Welded steel pipes for gas and oil pipelines. Technical specifications
Language: English
Price: $90.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!