GOST 2517-85
ГОСТ 2517-85
|
|
Crude oil and petroleum products. Methods of sampling
Нефть и нефтепродукты. Методы отбора проб
Status: Not effective - Superseded. Registration information 1448-st dated November 29, 2012 (official website of Rosstandart); IUS 6-2014
The standard establishes methods for sampling oil and oil products from tanks, underground storage facilities, oil tankers, rail and road tanks, pipelines, barrels, cans and other means of storage and transportation. The standard does not apply to liquefied gases and petroleum coke delayed coking.
Стандарт устанавливает методы отбора проб нефти и нефтепродуктов из резервуаров, подземных хранилищ, нефтеналивных судов, железнодорожных и автомобильных цистерн, трубопроводов, бочек, бидонов и других средств хранения и транспортирования. Стандарт не распространяется на сжиженные газы и нефтяной кокс замедленного коксования.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
12/28/1985
SKU: RUSS17247
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
013/2011 TR CU. About requirements to automobile and aviation gasoline, diesel and marine fuel, jet fuel and fuel oil »
Regulations and standards (to ТР ТС ТС 013/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
030/2012 TR CU. On requirements for lubricants, oils and special fluids »
Regulations and standards (to 030/2012 TR CU) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.2 Oil, oil products and gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
B Oil products »
B0 General rules and regulations for oil refining industry »
B09 Test methods. Packaging. Marking »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Control methods (testing, analysis, measurements) »
The Document is Replaced With:
GOST 2517-2012: Petroleum and petroleum products. Methods of sampling
As a Replacement Of:
GOST 2517-80: Crude petroleum and petroleum products. Sampling
The Document References:
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.4.010-75: Means of individual protection protective mittens
GOST 12.4.013-85: Occupational safety standards system. Goggles. General specification
GOST 12.4.034-2001: Individual respiratory protective devices
GOST 12.4.034-85: Occupational safety standards system. Means for individual protection of breathing organs. Classification and marking
GOST 12.4.111-82: Men's suits for protection against oil and products of oil processing
GOST 12.4.112-82: Women’s suites for protection from oil and oil products
GOST 12.4.124-83: Occupational safety standards system. Means of static electricity protection. General technical requirements
GOST 13196-93: Means of level measuring and sampling of oil and oil products
GOST 14921-78: Liquefied hydrocarbon gases. Methods of sampling
GOST 15895-77: Statistical quality control. Terms and definitions
GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure
GOST 26098-84: Petroleum products. Terms and definitions
GOST R 12.4.230.1-2007: Occupational safety standards system. Personal eyes protection means. General technical requirements
GOST R 50442-92: Petroleum and petroleum products. X-ray fluorescence method for determination of sulphur content
GOST R 50779.10-2000: Statistical methods. Probability and general statistical terms. Terms and definitions
GOST R 50779.11-2000: Statistical methods. Statistical quality control. Terms and definitions
The Document is Referenced By:
FR 1.29.2009.06689: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement procedure in vertical tanks
FR 1.39.2007.03221: Biological control methods. Method of determining the toxicity of water and water extracts from the soil, sewage sludge, waste from mortality and changes in fertility of ceriodaphnias
FR 1.39.2007.03222: Biological control methods. Methodology for determining the toxicity of water and water extracts from soils, sewage sludge, waste by mortality and changes in the fertility of daphnia
FR 1.39.2007.03223: Biological control methods. Methods for determining the toxicity of water, water extracts from the soil, sewage sludge and waste by changing the level of chlorophyll fluorescence and the number of algae cells
GOST 10121-76: Selectively purified transformer oil
GOST 1012-72: Aviation petrol
GOST 10136-77: Diethyleneglycol. Specifications
GOST 10214-78: Petroleum solvent. Specifications
GOST 10227-86: Jet fuels
GOST 10289-79: Oil for marine gas turbines
GOST 1033-79: Fatty cup grease. Specifications
GOST 10363-78: Oil ЭШ for hydraulic systems of high-load mechanisms. Specifications
GOST 10364-90: Petroleum and petroleum products. Method for determination of vanadium
GOST 10433-75: Fuel oil for gas-turbine plants. Specifications
GOST 10534-78: Sulphonated additive CБ-3. Specifications
GOST 10541-78: Automobile motor oils for carburetor engines
GOST 10564-75: Synthetic latex CKC-65 ГП. Specifications
GOST 1057-88: Solvent refined oils. Method for the determination of phenol and cresol content
GOST 10585-75: Black oil fuel
GOST 10585-99: Oil fuel. Mazut. Specifications
GOST 10589-87: Moulding polyamide 610. Specification
GOST 10835-78: Shale oil for wood impregnation. Specifications
GOST 10877-76: Preservative oil K-17
GOST 11010-84: Synthetic fat for leather industry. Specifications
GOST 11078-78: Sodium hydrate purified. Specifications
GOST 11110-75: Grease ЦИАТИМ-202. Specifications
GOST 11122-84: Hinge oil BНИИ НП-25. Specifications
GOST 11362-96: Petroleum products and lubricants. Neutralization number. Potentiometric titration method
GOST 11604-79: Synthetic latex CKД-1C. Specifications
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 12138-86: Diphenylolpropane for industrial use. Specifications
GOST 12257-93: Sodium chlorate technical. Technical conditions
GOST 12261-87: Afk additive
GOST 12271-76: The copolymers of styrene. Specifications
GOST 12308-89: Thermo stable t-6 and t-8b fuels
GOST 12329-77: Petroleum products and hydrocarbon solvents. Method for determination of aniline point and aromatic hydrocarbons
GOST 12337-84: Motor oils for diesel engines
GOST 12417-73: Mineral oils with additives and additives. Method for the determination of sulfated ash
GOST 12417-94: Petroleum products. Method for determination of sulphated ash
GOST 12433-83: Standard isooctanes. Specifications
GOST 12525-85: Grade reference cetane. Specifications
GOST 12672-77: Oil for rolling mills ПС-28. Technical specifications
GOST 12869-77: Electrical insulating synthetic fluid octol. Specifications
GOST 13003-88: Insulating oils. Method of gas stability determination in electric field
GOST 13076-86: Synthetic oil BНИИ НП 50-1-4ф. Specifications
GOST 13196-93: Means of level measuring and sampling of oil and oil products
GOST 13198-77: Technical acetoncyanohydrin. Specifications
GOST 13210-72: Benzenes. Determination of plumbum content by complexometric titration
GOST 13302-77: Petroleum acids
GOST 13374-86: Instrument oil ВНИИ НП-1-ЧМО. Specifications
GOST 13379-82: Petroleum. Determination of C1-C6 hydrocarbons by method of gas chromatography
GOST 13380-81: Petroleum products. Method for determination of sulphur microadmixtures
GOST 13522-78: Synthetic latex ДMMA-65 ГП. Specifications
GOST 13937-86: Higher primary fatty alcohols C10-C18, C12-C16 fractions. Specifications
GOST 14038-78: Shale oils. Method for determination of mechanical impurities and ash
GOST 14068-79: Paste ВНИИ НП-232. Specifications
GOST 14203-69: Oil and petroleum products. Capacitance method of determination of water content
GOST 14296-78: Grease ВНИИ НП-279. Specifications
GOST 14298-79: Oil fuel for open-hearth furnaces. Specifications
GOST 1461-75: Petroleum and petroleum products. Method of ash test
GOST 14710-78: Petroleum toluene
GOST 14888-78: Benzoyl peroxide technical. Specifications
GOST 15037-69: Grease for impregnating organic strand cores of wire rope
GOST 15171-78: Additive АКОР-1. Specifications
GOST 1520-84: Selectively refined oils. Method for determination of furfural presence in oils
GOST 1567-97: Petroleum products. Motor gasoline and aviation fuels. Determination of gum content by jet evaporation method
GOST 15819-85: Oils РМ and РМЦ. Specifications
GOST 16105-70: Grease ВНИИ НП-257. Specifications
GOST 16422-79: Transmission grease ЦИАТИМ-208. Specifications
GOST 16485-87: Dimethyldichlorsilan purified. Specifications
GOST 1667-68: Motor fuel for medium- and low-speed diesel engines
GOST 16728-78: Oil ВНИИ НП-403. Specifications
GOST 16862-71: Grease ВНИИ НП-263. Specifications
GOST 17147-80: Fuel TG-02. Specifications
GOST 17362-71: Mineral oils. Method of determination of saponification number
GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure
GOST 1756-52: Petroleum products. Determination of saturated vapors pressure
GOST 17750-72: Jet fuel. Method for the determination luminometric number on the ПЛЧT instrument
GOST 1805-76: Apparatus oil МВП. Specifications
GOST 18179-72: Grease OKБ-122-7. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 1861-73: Compressor oils
GOST 18852-73: Grease ВНИИ НП-246. Specifications
GOST 19006-73: Motor fuel. Method for determination of the filtering factor
GOST 19199-73: Lubricating oils. Method for determination of anticorrosive properties
GOST 19234-87: Technical monoethylamine. Specifications
GOST 1929-87: Petroleum products. Methods of test for determination of dynamic viscosity by rotary viscosimeter
GOST 19337-73: VNII NP-274 grease
GOST 1942-86: 1,2-Dichlorethane for industrial use. Specifications
GOST 19459-87: Injection moulding polyamide copolymers. Specifications
GOST 19537-83: Gun grease. Specifications
GOST 19538-74: Putty ЗЗК-3у. Specifications
GOST 1957-73: Constaline grease. Specifications
GOST 19652-89: Synthetic primary fatty alcohols, C7-C9 fractions. Specifications
GOST 19710-83: Ethylene glycol. Specifications
GOST 19774-74: Grease ВНИИ НП-207. Specifications
GOST 19782-74: Paste ВНИИ НП-225. Specifications
GOST 19791-74: Axle box grease ЛЗ-ЦНИИ. Specifications
GOST 19832-87: Grease ВНИИ НП-260. Specifications
GOST 19932-74: Petroleum products. Method of Conradson coking capacity test
GOST 19932-99: Petroleum products. Determination of carbon residue. Conradson method
GOST 20287-91: Petroleum products Method of test for flow point and pour point
GOST 20421-75: Grease ВНИИ НП-242. Specifications
GOST 20458-89: Grease Torsiol-55. Specifications
GOST 20491-75: Technical isopropylbenzene. Specifications
GOST 2070-82: Light petroleum products. Methods for determination of iodine numbers and content of unsaturated hydrocarbons
GOST 20734-75: Hydraulic fluid 7-50C-3. Specifications
GOST 20799-88: Industrial oils Specifications
GOST 2084-77: Mobile gasoline Specifications
GOST 21039-75: Acetic anhydride for industrial use. Specifications
GOST 21046-86: Waste petroleum products
GOST 21150-87: Litol-24 grease
GOST 21261-75: Petroleum products. Method for determination of specific heat of combustion
GOST 21261-91: Oil products. Method for the determination of gross calorific value and calculation of net calorific value
GOST 21532-76: Horological lubricant PS-1. Specifications
GOST 21534-76: Petroleum The determination of chloride salts content
GOST 21743-76: Aviation oils
GOST 21748-76: Oil MЗ-52. Specifications
GOST 2177-99: Petroleum products. Methods for determination of distillation characteristics
GOST 21791-76: Мac-30nk synthetic oil
GOST 21822-87: Petroleum fragile bitumens. Specifications
GOST 22055-76: Motor gasoline. Method for evaluation of gasoline ability to vapour lock formation
GOST 2222-78: Methanol-poison for industrial use. Specifications
GOST 2222-95: Technical methanol. Specifications
GOST 22245-76: Viscous petroleum road bitumens. Specification
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 22254-92: Diesel fuels. Cold filter method for determination of lowest filtering temperature
GOST 22385-94: Synthetic fat acids. Photometric method for determination of ester value
GOST 22986-78: Liquefied hydrocarbon gases. Method for determination of total sulphur
GOST 23001-88: Propylene oxide technical. Specifications
GOST 23008-78: Shock absorber liquid AЖ-12т. Specifications
GOST 23018-90: Synthetic fatty primary alcohols. Method of hydroxyl value determination
GOST 23239-89: Synthetic fat acids C5-C6, C7-C9, C5-C9, C10-C13, C10-C16, C17-C20 fractions. Specifications
GOST 23497-79: Motor oils M-14B23 and M-20B2. Specifications
GOST 23510-79: UNIOL-2 Grease. Specifications
GOST 23519-93: Technical synthetic phenol. Specifications
GOST 23639-79: Additive KP
GOST 23652-79: Transmission oils
GOST 23683-89: Hard petroleum paraffines
GOST 23783-79: Synthetic primary fatty alcohols. C16-C21 fractions. Specifications
GOST 23844-79: Khladon 113. Specifications
GOST 24006-80: Alcohols fatty. Method for determination of fraction composition by gas chromatography
GOST 24445.0-92: Phthalic anhydride for industrial use. General requirements for methods of analysis
GOST 24445.5-80: Phtalic anhydride. Method of determination of melt colouring
GOST 2477-65: Petroleum and petroleum products. Method for determination of water content
GOST 24869-98: Industrial cleanliness. General
GOST 2488-79: Ceresin. Specifications
GOST 25219-87: Synthetic fatty acids. Methods for determination of fractional composition by gas chromatography
GOST 25287-82: Suspension for lubricating film formation BНИИ НП-209. Specifications
GOST 25770-83: High-speed diesel engine motor oils for transport vehicles
GOST 25771-83: Paraffin and ceresines. Method of penetration test by needle
GOST 25784-83: Petroleum fuel of gas turbines fuels. Determination content of sodium, potassium and calcium
GOST 25821-83: Fluid PGV. Specifications
GOST 25828-83: Standard n-heptane. Specifications
GOST 25950-83: Jet aircraft fuel with antistatic additive. Method for determination of specific conductivity.
GOST 26028-83: Dark-coloured raw material for surfactants. Method of determination of an acid value
GOST 26295-84: Isopropylnitrate. Specifications
GOST 26378.0-84: Used petroleum products. General requirements for the methods of the tests
GOST 26581-85: Greases. Method of test for effective viscosity on a rotary viscosimeter
GOST 26624-85: 2-Ethylhexanol technical. Specifications
GOST 2712-75: Grease АМС. Specifications
GOST 2768-84: Acetone technical. Specifications
GOST 27768-88: Diesel fuel. Determination of cetane index by calculation method
GOST 28084-89: Low-freezing cooling liquids. General specifications.
GOST 28250-89: High-impact polystyrene. Specifications
GOST 28478-90: Surface active agents. Determination of mineral sulphate content. Titrimetric method
GOST 28781-90: Petroleum and petroleum products. Method for determination of saturated vapours pressure by mechanical dispersing
GOST 28828-90: Benzenes. Method for determination of plumbum
GOST 28960-91: Furfurol alcohol. Specification
GOST 28967-91: Petroleum bitumens. X-ray phase method for determination of paraffin
GOST 29039-91: Technical oleic acid. Acceptance rules and test methods
GOST 29040-91: Gasoline. Method of determination of benzene and total aromatics
GOST 29174-91: Petroleum products and lubricants. Petroleum lubricating oils for turbines (categories ISO-L-TSA and ISO-L-TGA). Specifications
GOST 2917-76: Oils and additives. Method of test for corrosion influence on metals
GOST 29232-91: Anionic and non-ionic surface active agents. Determination of the critical micellization concentration. Method by measuring surface tension with a plate, stirrup or ring
GOST 29289-92: Wood chemical products. Rules of acceptance, sampling
GOST 29333-92: Fluorinated hydrocarbons for industrial use. Determination of non-volatile residue
GOST 30050-93: Petroleum products. Total base number. Perchloric acid potentiometric titration method
GOST 30145-94: Essential oils and products of essential oil production. Acceptance rules, sampling and methods of organoleptic tests
GOST 305-82: Diesel fuel. Specifications
GOST 3134-78: White spirit
GOST 31378-2009: Oil. General specifications.
GOST 3164-78: Medical petrolatum. Specifications
GOST 31811-2012: Ethanol and ethanol-containing products. Gas-chromatographic method for determination of crotonaldehyde (denaturant additive)
GOST 32508-2013: Diesel fuels. Determination of cetane number
GOST 3260-75: Lubricant projectile sun. Technical conditions
GOST 32-74: Turbine oils
GOST 3276-89: Lubricating grease ГОИ-54п. Specifications
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 3333-80: Graphite lubricant
GOST 33-82: Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity
GOST 3582-84: Medical vaseline. Specifications
GOST 3677-76: Ceresin composition. Specifications
GOST 3877-88: Petroleum products. Determination of sulfur by calorimetric bomb method
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 4039-88: Automobile gasolines. Methods of test for induction period
GOST 4095-75: Isooctane for industrial use. Specifications
GOST 4113-80: Preventive composition ПП 95/5. Specifications
GOST 4225-76: Perfume oil. Specifications
GOST 4338-74: Petroleum products. Method of smoke point determination
GOST 4338-91: Aviation turbine fuels. Determination of smoke point
GOST 4366-76: Grease synthetic solidol. Specifications
GOST 443-76: Benzene-solvent for rubber industry. Technical requirements
GOST 4806-79: Shale oil fuel. Specifications
GOST 4-84: Carbon tetrachloride for industrial use. Specifications
GOST 5020-75: Liquid 'Steol-M'. Specifications
GOST 5066-91: Motor fuels. Methods for determination of cloud, chilling and freezing points
GOST 5208-2013: Technical normal butyl alcohol. Specifications
GOST 5208-81: Technical normal butyl alcohol. Specifications
GOST 5211-85: Lubricating greases. Method for determination of soap, mineral oil and high-molecular organic acids percentage
GOST 5344-82: Emulsionized paste for leather industry. Specifications
GOST 5546-86: Oils for refrigerating machines
GOST 5702-75: Process lubricant SP-3
GOST 5734-76: Greases method for the determination of oxidation stability
GOST 5774-76: Condenser vaselin. Technical requirements
GOST 5775-85: Capacitor oil
GOST 5985-79: Petroleum products. Method for determination of acidity and acid number
GOST 610-72: Oils for axle journals. Specifications
GOST 6267-74: Grease ЦИАТИМ-201. Specifications
GOST 6321-92: Engine fuels. Method for copper strip test
GOST 6350-56: Lubricating oils of selective cleaning. Qualitative method of nitrobenzene content
GOST 6360-83: MT-16P and M-16PC oils.
GOST 6411-76: Heavy cylinder oils
GOST 6457-66: Oils МК-8. Specifications
GOST 6479-73: Lubricating greases. Method for determination of mechanical impurities content by hydrochloric acid decomposition
GOST 6617-76: Petroleum construction bitumen
GOST 6794-75: Oil АМГ-10. Specifications
GOST 6948-81: Foaming agent PО-1Specifications
GOST 6997-77: Compositions for filling cable joints. Specifications
GOST 7119-77: Phthalic anhydride for industrial use. Specifications
GOST 7171-78: Petrol-resisting grease. Specifications
GOST 7611-75: Oil for ventilating filters. Specifications
GOST 7658-74: Synthetic high-melting ceresin. Specifications
GOST 781-78: Bitumen oil high-melting softener
GOST 7936-76: Thickened clock oil PS-4
GOST 8.346-2000: State system for ensuring the uniformity of measurements. Steel horizontal cylindrical tanks. Calibration methods
GOST 8.570-2000: State system for ensuring the uniformity of measurements. Steel vertical cylindrical tanks. Calibration methods
GOST 8.589-2007: State system for ensuring the uniformity of measurements. Conducting registration operations on items of reception-delivery of oil in the petrowire systems
GOST 8.601-2010: State system for ensuring the uniformity of measurements. Saturated vapours pressure of petroleum and petroleum products. Measurement procedure
GOST 8.636-2013: State system for ensuring the uniformity of measurements. Density of petroleum. Requirements to methods of measurement by hydrometers during metering operations
GOST 8313-88: Technical ethylcellosolve. Specifications
GOST 8463-76: Oil С-220. Specifications
GOST 8505-80: Nefras-C 50/170. Specifications
GOST 8551-74: Grease ЦИАТИМ-205. Specifications
GOST 8581-78: Motor oil for automobile and tractor
GOST 8728-88: Plasticizers. Specifications
GOST 8771-76: Petroleum bitumen for filling accumulator mastics
GOST 8773-73: Grease ЦИАТИМ-203. Specifications
GOST 8997-89: Petroleum products. Electrometric method for determination of bromine numbers and unsaturated hydrocarbons
GOST 9.052-88: Unified system of corrosion and ageing protection. Oils and greases. Laboratory test methods for mould resistance
GOST 9.085-78: Single corrosion and ageing protection system. Cooling lubricant. Bioresistance test methods
GOST 9243-75: KS-19 compressor oil
GOST 9270-86: Oils and greases. Method for determination of mechanical impurities in counting chamber
GOST 9385-2013: Technical ethyl benzene. Specifications
GOST 9385-77: Ethyl benzene technical. Specifications
GOST 9410-78: Petroleum xylol. Specifications
GOST 9432-60: Automobile lubricant
GOST 9433-80: Grease ЦИАТИМ-221. Specifications
GOST 9536-2013: Technical isobutyl alcohol. Specifications
GOST 9536-79: Isobutyl alcohol. Specifications
GOST 9548-74: Roofing petroleum bitumens. Specifications
GOST 9549-80: Copper naphthenate for preservative compounds. Specifications
GOST 9572-77: Petroleum benzene. Technical requirements
GOST 9572-93: Petroleum benzene
GOST 9762-76: Grease МС-70. Specifications
GOST 9805-84: Isopropyl alcohol. Specifications
GOST 9812-74: Petroleum insulating bitumen
GOST 982-80: Transformer oils
GOST 9875-88: Technical diethylamine. Specifications
GOST 9965-76: Petroleum for oil-processing plants. Specifications
GOST 9966-88: Technical triethylamine. Specifications
GOST 9968-86: Methylene dichloride technical. Specifications
GOST 9972-74: Petroleum turbine oils with additives
GOST 9976-94: Technical trichloroethylene. Specifications
GOST 9980.2-86: Paint materials. Test sampling
GOST EN 116-2013: Diesel and domestic heating fuels. Test method of determination of plugging point
GOST EN 12177-2013: Liquid petroleum products. Gasoline. Determination of benzene content by gas chromatography method
GOST EN 12916-2012: Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection
GOST EN 13132-2012: Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
GOST EN 1601-2012: Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography method using the oxygen flame-ionization detector (O-FID)
GOST EN 237-2013: Liquid petroleum products. Determination of low lead concentrations by atomic absorption spectrometry
GOST ISO 13032-2014: Petroleum products. Determination of low sulfur concentrations in automotive fuels by energy dispersive x-ray fluorescence spectrometry
GOST ISO 13357-1-2013: Petroleum products. Determination of the filterability of lubricating oils. Part 1. Oils in the presence of water
GOST ISO 13357-2-2013: Petroleum products. Determination of the filterability of lubricating oils. Part 2. Dry oils
GOST ISO 20846-2012: Petroleum products. Determination of sulfur content by ultraviolet fluorescence method
GOST ISO 4263-1-2013: Petroleum and petroleum products. Determination of the ageing behaviour of inhibited oils and fluids. TOST method. Part 1. Mineral oils
GOST ISO 4263-4-2013: Petroleum and petroleum products. Determination of the ageing behaviour of inhibited oils and fluids. TOST method. Part 4. Industrial gear oils
GOST ISO 6617-2013: Petroleum-based lubricating oils. Ageing characteristics. Determination of change in Conradson carbon residue after oxidation
GOST R 18.12.03-2018: Technology of the aviation fueling. Filtering equipment in Aviation Fuel Supply. General technical requirements
GOST R 50442-92: Petroleum and petroleum products. X-ray fluorescence method for determination of sulphur content
GOST R 50472-93: Surface active agents. Technical alkane sulfonates. Determination of alkane monosulfonates content by direct two-phase titration
GOST R 50588-93: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50802-95: Petroleum. Method for determination of hydrogen sulphide, methyl- and ethylmercaptans
GOST R 50837.1-95: Residual fuel oils. Test for straight-run. Method for determination of the total shape of distillation curve at pressure of 0,133 kPa (1 mm Hg)
GOST R 50837.2-95: Residual fuel oils. Test for straight-run. Method for determination of bromine number in fraction boiling down up to 360 °C
GOST R 50837.4-95: Residual fuel oils. Test for straight-run. Method for determination of xylene equivalent
GOST R 50913-96: Road vehicles for transportation and fuelling of petroleum products. Types, parameters and general technical requirements
GOST R 51105-97: Gasoline for combustion engines. Unleaded gasoline. Specifications
GOST R 51858-2002: Crude petroleum. General specifications
GOST R 51866-2002: Automotive fuels. Unleaded petrol. Specifications
GOST R 51907-2002: Motor oil for marine diesels М-20Г2СД. Specifications
GOST R 52050-2003: Aviation turbine fuel Jet A-1. Specifications
GOST R 52050-2006: Aviation turbine fuel Jet A-1. Specifications
GOST R 52056-2003: Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications
GOST R 52247-2004: Petroleum. Methods for determination of organic chlorides
GOST R 52338-2005: Industrial cleanliness. Methods for lubricating and cooling liquids testing
GOST R 52368-2005: Diesel fuel EVRO. Specifications
GOST R 52532-2006: Base oils. Gas chromatographic method for determination of N-methylpyrrolidone
GOST R 52574-2006: Technical and denatured synthetic ethyl alcohol. Specifications
GOST R 52666-2006: Lubricating oils. Determination of barium, calcium, magnesium and zinc concentrations by atomic absorption spectrometry method
GOST R 52709-2007: Diesel fuels. Determination of cetane number
GOST R 52714-2007: Motor gasolines. Determination of individual and group hydrocarbon composition by method of capillary gas chromatography
GOST R 52755-2007: Liquid composite fuel. Specifications
GOST R 52788-2007: Ethanol and ethanol-containing production. Gas-chromatographic method for determination of crotonaldehyde (denaturant additive)
GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements
GOST R 52947-2008: Petroleum products. Determination of knock characteristics of motor fuels. Research method
GOST R 53134-2008: Automotive spark-ignition engine fuels. Unleaded gasoline. Specifications
GOST R 53203-2008: Petroleum products. Determination of sulphur by method of wavelength dispersive X-ray fluorescence spectrometry
GOST R 53229-2008: Conformity assessment. Rules for conducting the works related to conformity assessment of automobile and aviation gasoline, diesel and marine fuel, jet aircraft fuel and residual oil
GOST R 53581-2009: Gasoline. Determination of the phosphorus content
GOST R 53605-2009: Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. General technical requirements
GOST R 53706-2009: Aviation fuels. Method of freezing point determination
GOST R 53714-2009: Motor fuels, aviation fuels and low-boiling distillates. Method for determination of existent gums by jet evaporation
GOST R 53717-2009: Petroleum products. Test method for flash point by Tag closed cup tester
GOST R 54277-2010: Fuel ethanol. Determination of total and potential sulphates and inorganic chlorides by method of direct injection suppressed ion chromatography
GOST R 54284-2010: Crude oil. Determination of water by coulometric Karl Fischer titration
GOST R 54287-2010: Fuel ethanol. Determination of total and potential inorganic sulphates and total inorganic chlorides by method of ion chromatography using aqueous sample injection
GOST R 54289-2010: Diesel fuels. Method for determination of filterability by low-temperature flow test (LTFT)
GOST R 54291-2010: Crude petroleum. Gas chromatography method for determination of components boiling temperature range distribution
GOST R 54299-2010: Marine fuels. Specifications
GOST R 54323-2011: Motor gasolines. Determination of N-methylaniline by method of capillary gas chromatography
GOST R 54331-2011: Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear. Specifications
GOST R 54389-2011: Stable gas condensate. Specifications
GOST R 54433-2011: Renovable power engineering. Wind power plants. Maintenance safety requirements
GOST R 55065-2012: Phenolic antioxidants. Agidol-2. Specifications
GOST R 55475-2013: Dewaxed winter and arctic diesel fuel. Specifications
GOST R 55610-2013: Oil measuring systems. General specifications
GOST R 55783-2013: High-explosive torpedoes. Technical conditions
GOST R 55784-2013: Cutters cumulative. Technical conditions
GOST R 55878-2013: Rectified hydrolytic technical ethyl alcohol. Specifications
GOST R 8.595-2002: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements to procedures of measurements
GOST R 8.595-2004: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements
GOST R 8.601-2003: State system for ensuring the uniformity of measurements. Pressure of saturated steams of crude oil and products from oil. Measurement procedure
GOST R 8.615-2005: State system for ensuring the uniformity of measurements. The measuring of quantity of taken from bowels oil and oil gas. General metrological and technical requirements
GOST R 8.688-2009: State system for ensuring the uniformity of measurements. Density of petroleum. Requirements for methods of measurement by hydrometers during metering operations
GOST R 8.786-2012: State system for ensuring the uniformity of measurements. Fuel oil mass. Measurement procedure in horizontal storage tanks by indirect method of static measurements. General metrological requirements
GOST R 8.787-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement of the fuel oil mass in railway tanks. General metrological requirements
GOST R EN 12177-2008: Liquid petroleum products. Petroleum. Determination of benzene content by method of gas chromatography
GOST R EN 12916-2008: Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection
GOST R EN 13016-1-2008: Liquid petroleum products. Part 1. Determination of air saturated vapour pressure (ASVP)
GOST R EN 14078-2010: Liquid petroleum products. Determination of fatty acid methyl esters (FAME) in middle distillates by infrared spectroscopy method
GOST R EN 14331-2010: Liquid petroleum products. Separation and characterization of fatty acid methyl esters (FAME) from middle distillates by method of liquid chromatography and gas chromatography
GOST R EN 14538-2009: Fat and oil derivatives. Fatty acid methyl ester (FAME). Determination of Ca, K, Mg and Na content by optical emission spectral method with inductively coupled plasma (ICP OES)
GOST R EN 15195-2011: Liquid petroleum products. Middle distillate fuels. Method for determination of ignition delay and derived certain number (DCN) by combustion in a constant volume chamber
GOST R EN 1601-2007: Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography method using the oxygen flame-ionization detector (O-FID)
GOST R EN 237-2008: Liquid petroleum products. Determination of low lead concentrations by atomic absorption spectrometry
GOST R EN ISO 12205-2007: Petroleum products. Determination of the oxidation stability of distillate fuels
GOST R EN ISO 14596-2008: Petroleum products. Determination of sulphur content by method of wavelength-dispersive X-ray fluorescence spectrometry
GOST R EN ISO 20847-2010: Petroleum products. Determination of sulphur content in automotive fuels by energy-dispersive X-ray fluorescence spectrometry
GOST R EN ISO 22854-2010: Liquid petroleum products. Аutomotivemotor gasolines. Determination of hydrocarbon types and oxygenates by method of multidimensional gas chromatography
GOST R EN ISO 2719-2008: Petroleum products. Methods for determination of flash point in Pensky-Martens closed cup
GOST R EN ISO 3405-2007: Petroleum products. Method for determination of distillation characteristics at atmospheric pressure
GOST R ISO 13736-2010: Combustible liquids. Determination of Abel closed-cup flash point
GOST R ISO 3675-2007: Crude petroleum and liquid petroleum products. Laboratory hydrometer method for determination of density
GOST R ISO 3679-2010: Methyl esters of fatty acids (FAME). Rapid equilibrium closed cup method of flash point determination
GOST R ISO 3734-2009: Petroleum products. Determination of water and sediment content in residual fuel oils by centrifuge method
GOST R ISO 5275-2009: Petroleum products and hydrocarbon solvents. Detection of thiols and other sulphur species (doctor test)
GOST R ISO 6388-93: Surface active agents. Determination of flow properties using a rotational viscometer
ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
MI 1974-2004: State system for ensuring uniformity of measurements. Turbine flow transducers. Method of verification
MI 2019-89: GSE. Density of oil and oil products. Measurement Technique for Flow Density
MI 2092-90: Recommendation. State system for ensuring uniformity of measurements. Mass of fuel oil in railroad tank cars. The method of measurement by the volume-mass method
MI 2153-2001: State system for ensuring uniformity of measurements. Density of oil. Requirements for the method of performing measurements by the areometer with the operations taken into account
MI 2153-2004: State System of Measuring Uniformity Provision. Oil density. Requirements to areometer measurement procedures for discounting
MI 2391-97: State system for ensuring uniformity of measurements. Flow viscometer of the firm "Sol-Trohn Caressers" (England). Method of verification
MI 2579-2000: State system for ensuring uniformity of measurements. Tanks (tanks) of river and sea bulk vessels. Method of verification by the volumetric method
MI 2643-2004: State system for ensuring uniformity of measurements. Hydrometers flow models L, M, F company "Phase Dynamic, Inc." (USA). Method of verification
MI 2668-2001: Recommendation. GSE. The order of application of GOST 1756-52 when measuring the pressure of saturated vapor of oil from Kharyaginskoe field of the company “Total Fin-El”
MI 2693-2001: Crude Oil Metering Oil Production Facilities
MI 2735-2002: Recommendation. GSE. A lot of oil. Methods for measuring the system of measuring the quantity and quality of oil UUN NSP "Sergeevka" NGDU "Ufaneft"
MI 2825-2003: Oil quantity and quality ratio measurement system. Metrological and technical design requirements
MI 2837-2003: Oil hand-over and acceptance points metrological and technical support
MI 2893-2004: Recommendation. State system for ensuring uniformity of measurements. Systems for measuring the quantity and quality of oil. Type approval tests. General provisions and organization of work in the system of the main pipeline transport of JSC AK Transneft
MI 2950-2005: Recommendation. State system for ensuring uniformity of measurements. A lot of oil. Methods for performing measurements in horizontal tanks in the system of the main pipeline transport
MI 2951-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in vertical tanks in the system of main pipeline transport
MI 2952-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in railway tanks in the system of main pipeline transport
MI 2953-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in automobile tanks in the system of the main oil pipeline transport
MI 2956-2005: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic transducers of oil consumption with a nominal diameter of 400 mm and more. Method of verification
MI 2972-2006: State system of measuring uniformity provision. Petroleum mass. Method of measuring by the system of petroleum quantity and properties measuring system No.1005 JSC ´Shugurovskiy petrochemical plant´
MI 2974-2006: State system of measuring uniformity provision. Class 2 piston-pipe calibration rigs. Verification method for class 1 piston-pipe calibration rig with comparator
MI 2975-2006: State system of measuring uniformity provision. Petroleum mass. Indirect measuring method of dynamic measurements on the registration point pump station 'Suslovo' JSC 'Uraltransnefteproduct'
MI 2992-2006: Recommendation. State system for ensuring uniformity of measurements. Buried trench tanks with capacity from 5,000 to 10,000 m3. Method of verification by the volumetric method
MI 3200-2009: Recommendation. GSE. Mass of crude oil. Methods of measuring the system of measuring the amount and parameters of crude oil at the temporary loading point of the Bayandy field at the Chamber of Commerce and Industry Usinskneftegaz OOO Lukoil-Komi
MI 3206-2009: State system for ensuring uniformity of measurements. Systems for measuring the quantity and quality indicators of oil, petroleum products and liquid hydrocarbons. Rules of commissioning. Main provisions
MI 3241-2009: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement technique indirect method of dynamic measurements
MI 3242-2009: State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Methods of measurement in horizontal tanks
MI 3275-2010: State system for ensuring uniformity of measurements. Metrological support for oil products account during transportation via main pipelines system. Main provisions
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil
MI 3372-12: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Systems for measuring the quantity and quality of petroleum products. General technical and metrological requirements
MI 3380-2012: State system for ensuring uniformity of measurements. Volume flow transducers. Methods of verification on-site calibration equipment
MI 3532-2015: State system for ensuring the uniformity of measurements. Recommendations on definition of weight of oil at registration operations with application quantity measures and indicators of oil quality
MI 584-84: Guidelines. Turbine flow converters workers. Method of verification
Minutes 50: Regulations for carriage of liquid cargo in bulk in tank wagons and hopper-type wagons for transportation of oilbitumen
MU 08-47/114: Automobile gasolines. Inversion voltammetric method for determining the mass concentration of lead
ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads
ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings
ODM 218.3.022-2012: Guidelines for determining the physicomechanical properties of hot mix asphalt concrete, harmonized with European standards
OST 218.010-98: Cementing polymer-bitumen road coating on the basis of block copolymers such as SBS. Specifications
OST 38.01445-88: Lubrication and cooling liquid MR-7. Technical conditions
OST 51.65-80: Stable gas condensate. Technical conditions.
PMG 65-2003: State system for ensuring the uniformity of measurements. Rail tankers. General requirements for methods of verification by a volumetric method
PND F T 14.1:2:3:4.10-2004: Toxicological methods of analysis. Methods for determining the toxicity of drinking, natural and waste waters, water extracts from the soil, sewage sludge and production and consumption waste by changing the optical density of the chlorella algae culture
PND F T 14.1:2:4.12-06: Toxicological methods of analysis. Methods for determining the toxicity of drinking, fresh natural and wastewater, water extracts from the soil, sewage sludge and waste of daphnia mortality (Darnia magma STraus)
PNST 10-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of the paraffin wax content
PNST 11-2012: Automobile roads of general use. Viscous petroleum road bitumens. Method of determination of kinematic viscosity
PNST 1-2012: Automobile roads of general use. Viscous petroleum road bitumens. Specifications
PNST 154-2016: Petroleum products. Recovery of quality parameters
PNST 155-2016: Petroleum products. Use of test methods for quality supporting
PNST 2-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of the tensile properties of modified bitumen by the force ductility method
PNST 3-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of needle penetration
PNST 4-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of the softening point. Ring and Ball method
PNST 5-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of the Fraass breaking point
PNST 6-2012: Automobile roads of general use. Viscous petroleum road bitumens. Test method determination of dynamic viscosity by rotational viscometer
PNST 7-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of flash points. Cleveland open cup method
PNST 8-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of the resistance to hardening under influence of heat and air (RTFOT method)
PNST 9-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of solubility
POT R O-112-001-95: Rules for labor protection during the operation of oil depots and gas stations
POT R O-112-002-98: Rules for labor protection during the operation of trunk oil pipelines
R 50.2.040-2004: Metrological assurance of oil accounting when transferring via main pipeline system. Basic provisions
R 50.2.072-2009: State system for ensuring the uniformity of measurements. Water mass concentration in crude oil. Discrete measurements procedures with the use cut meter 'OXH'
R 50.2.075-2010: State System for ensuring the uniformity of measurements. Crude Petroleum and Petroleum Products. Laboratory Methods for Determination of Density, Relative Density and API Gravity
RD 153-34.0-04.202-98: Procedural Guidelines. Certification of Departments of Energy Facilities Performing Quantitative Chemical Analysis. Organization and Procedure
RD 153-34.0-44.220-2000: Solid and Liquid Fuel. Determination of Heavy Metals (Microimpurities) by Atomic Absorption Spectrophotometry
RD 153-34.0-44.221-2000: Guidelines for Quality Control of Diesel Fuel at Thermal Power Stations During Acceptance, Storage, and Use of it as Main, Backup, or Start-Stop Fuel in Gas Turbine and Steam-Gas Units
RD 153-34.1-09.205-2001: Specified Quantity Allowances for Heat for Fuel Oil System of Thermal Power Stations
RD 153-34.1-44.202-2001: Petroleum fuel for gas turbines. Determination of vanadium by atomic absorption spectrophotometry (flameless method)
RD 153-34.1-44.210-2001: Petroleum fuel for gas turbines. Lead determination by atomic absorption spectrophotometry (flameless method)
RD 153-39.2-080-01: Rules of technical operation of petrol stations.
RD 153-39.4-001-96: Rules of Delivery of Oil Products To Oil Storage Tanks, Petrol Stations and Warehouses of Combustibles and Lubricants Through the Branches of the Main Oil Product Pipelines
RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.
RD 153-39.4-058-00: Standard plan for the organization and technology of work on the elimination of accidental spills of petroleum products in case of accidents and damage to crossings of oil pipelines through major water barriers
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD 153-39-011-97: Instruction on accounting of oil products on trunk oil-products pipelines.
RD 153-39-019-97: Methodical instructions for determining the technological losses of oil at the enterprises of oil companies of the Russian Federation
RD 200-RSFSR-12-0053-84: Instructions for receiving, storing, issuing and accounting of fuels and lubricants in road transport enterprises
RD 31.11.81.12-78: Technical Specifications for Maritime Transport of Bulk Benzene
RD 31.11.81.36-81: Rules for the sea transportation of oil and oil products in bulk on MMF tankers
RD 31.11.81.38-82: General rules for the sea transportation of bulk cargoes on ships
RD 31.27.05-99: Instructions for acceptance, storage, release on vessels and quality control of fuels and lubricants in tank farms and warehouses.
RD 34.01.203: Model Index of Operations Documentation for Chemical Shop of a Thermal Power Station
RD 34.03.201-97: Safety Code for the Operation of the Thermo mechanical Equipment of Electric Power Stations and Heat Networks.
RD 34.09.105-96: Procedural Guidelines for Organization of Fuel Metering at Thermal Power Stations
RD 34.09.109: Procedural Guidelines for Inventory of Liquid Fuel at Electric Power Generating Stations
RD 34.09.604-89: Model Guidelines for Organization of Collection and Rational Use of Used Petroleum Products at Thermal and Hydroelectric Generating Stations, Electrical Networks, and Repair Facilities Administered by Minenergo USSR
RD 34.11.111-89: Methodology instructions. State analysis of metrological industrial support at energy providers and sectoral research institutes
RD 34.20.501-95: Technical operation rules for power plants and networks of the Russian federation
RD 34.30.508-93: Model Guidelines for Operation of Oil Systems Using Mineral Oil for Turbine Units with Power of 100-800 MW
RD 34.43.102-96: Guidelines for Use of Petroleum-Based Turbine Oils
RD 34.43.105-89: Procedural Guidelines for Use of Transformer Oils
RD 34.43.206-94: Methods for Quantitative Chemical Analysis. Determination of Content of Furane Derivatives in Electrical Insulating Oils by Liquid Chromatography
RD 34.43.208-95: Methods for Quantitative Chemical Analysis. Determination of Content of Additives in Oils Used in Energy Equipment by High Performance Liquid Chromatography
RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97
RD 34.44.206-93: Petroleum Fuel. Method for the Determination of Hydrogen
RD 34.44.208-94: Petroleum Fuel. Fuel Oil. Determination of Ash Composition
RD 34.44.215-96: Methods for the Determination of Quality of Water-Fuel Oil Emulsions Used n the Form of Liquid Boiler Fuel
RD 34.44.216-96: Petroleum Fuel for Gas Turbine Installations. Determination of Vanadium by Atomic Absorption Spectrophotometry (Direct Method)
RD 34.45-51.300-97: Electrical equipment testing scope and standards.
RD 39-0137095-003-87: Automation and telemechanization of main oil pipelines when creating unmanned technology
RD 39-0147103-354-89: Model Provision for a Laboratory Performing Oil Analysis for Acceptance Operations
RD 39-0147103-388-87: Methodical instructions for determining the technological losses of oil at the enterprises of the Ministry of Petroleum Industry
RD 39-0148070-303-85: Guidelines for the application of oil separation technology for fields with high gas factor
RD 39-1-1261-85: Technological regulations on the use of demulsifiers in oil preparation processes
RD 39-30-85-78: Rules of operation of treatment facilities of oil-trunk pipeline bases, loading depots and pumping stations.
RMG 100-2010: State system for ensuring the uniformity of measurements. Recommendations about definition of weight of oil at registration operations with application quantity measures and indicators of quality of oil
RMG 101-2010: State system for ensuring the uniformity of measurements. Petroleum quantity and parameters of quality measurements systems. Metrological and technical specifications to the designing
RMG 108-2011: State system for ensuring the uniformity of measurements. Verticil reinforced-concrete tanks. Procedure of verification by volumetric method
RMG 109-2011: State system for ensuring the uniformity of measurements. Oil. Sampling from the pipelines
RMG 112-2010: State system for ensuring the uniformity of measurements. Tanks of river and sea liquid cargo vessels. Procedure of verification by volumetric method
RMG 116-2011: State system for ensuring the uniformity of measurements. Tanks of main oil lines and oil storage depots. Maintenance operations and metrological assurance under operating conditions
RMG 85-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in railway tanks in the system of main oil pipeline transport. The main provisions
RMG 86-2009: State system for ensuring the uniformity of measurements. Mass of petroleum. Measurement procedure in vertical tanks in the main petrowire systems. Basic propositions
RMG 87-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in horizontal tanks in the system of main oil pipeline transport. The main provisions
RMG 88-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in motorcar tanks in the system of main oil pipeline transport. The main provisions
RMG 89-2010: State system for ensuring the uniformity of measurements. Acceptance point of oil. Metrological and technical assurance
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 2 (Parts VII-X) (Modified and Supplemented) (2013 Edition)
Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 1 (General Provisions - Parts I-II) (as amended and supplemented) (2013 Edition)
Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 3
Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 1 (Parts III-VI) (with Amendments and Supplements) (2013 Edition)
Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 2 (Parts XI-XIII) (with Amendments and Additions) (2013 Edition)
Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 2 (Parts XIV-XVI) (with Amendments and Additions) (2013 Edition)
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SO 34.09.114-2001: Guidelines for quality control of solid, liquid and gaseous fuels for the calculation of specific fuel consumption at thermal power plants
SO 34.23.501-2005: Guidelines for the operation of fuel oil facilities of thermal power plants
SO 34.26.721: Guidelines for testing steam boilers for separate combustion of natural gas and fuel oil
SO 34.26.722: Guidelines for testing steam boiler superheaters
SO 34.44.223: Recommendations for fuel claim handling
SP 37.13330.2012: Industrial transport
ST RK 1227-2003: Bitumens and bituminous binders. Determination of a softening point by the ball-and-ring method
ST RK 1228-2003: Bitumens and bituminous binders. Method for determination of solvability
ST RK 1229-2003: Bitumens and bituminous binders. Method for determination a Fraas brittle point
ST RK 1230-2003: Petroleum bitumens. Methods for determination of paraffin content
ST RK 1314-2004: Crude petroleum. Determination of water content. Distillation methods
ST RK 1420-2005: Road vehicles for transportation and fuelling of petroleum products. Types, parameters and general technical requirements
ST RK 1473-2005: Oil. Method for determination hydrogen sulphide, methyl- and ethyl-mercaptan
ST RK 1529-2006: Oil. Methods for determination of organic chloride compounds
ST RK 2051-2010: Liquid petroleum products. Petroleum. Determination of benzene content by method of gas chromatography
ST RK 2468-2014: Hydraulic oil AUP. Specifications.
ST RK 2470-2014: All-seasons hydraulic oil (VMGZ) Specifications.
ST RK 2471-2014: Motor oils All Season universal categories sf, sj, sl, sm, sn, cf-4, cg-4, ch-4, cl-4, cj-4 api. Specifications.
ST RK 2472-2014: Oils for automatic transmission systems. Specifications.
ST RK 2473-2014: Multigrade oil for mechanical transmission systems Category gl-4, gl-5. Specifications.
ST RK ISO 12937-2004: Oil products. Determination of water content. Coulometric titration method of Karl Fischer
ST RK ISO 3170-2006: Oil and oil products. Manual sampling methods
STB EN 116-2002: Diesel and domestic liquid fuel. Method for determination of filtration temperature limits
STB EN 12177-2005: Liquid petroleum products. Unleaded petrol. Determination of benzene by gas chromatography
STB EN 13132-2006: Liquid petroleum products. Nonleaded gasoline. Determination of organic oxygenate compounds and total content of organically bound oxygen by gas chromatography using switching columns
STB EN 1601-2005: Petroleum products. Unleaded gasoline. Determination of organic oxygenate compounds and total oxygen content by gas chromatography (О-FID)
STB EN 237-2005: Liquid petroleum products. Gasoline. Determination of small concentrations of lead by atomic absorption spectrometry
STB ISO 14596-2002: Petroleum products. Determination of sulphur content by X-ray fluorescence spectrometry
STB ISO 20846-2005: Liquid petroleum products. Determination of sulphur content in motor fuel by ultraviolet fluorescence method
STB ISO 2719-2002: Method for determination of flash point using Pensky- Martens device with closed cup
STB ISO 3405-2003: Petroleum products. Method for determination of fraction composition under atmospheric pressure
STB ISO 5163-2008: Oil products. Determination of knock values of motor and aviation fuel. Motor method
STB ISO 5164-2008: Oil products. Determination of knock values of motor fuel. Research method
STB ISO 5165-2002: Petroleum products. Determination of flammability of diesel fuel. Determination of cetane number by motor method
TR 103-07: Technical recommendations for the construction of road structures using asphalt concrete
TU 0253-053-00151911-2008: Industrial oils
TU 38.1011299-2006: IPM 10 aviation oil
TU 38.101821-2001: Turbine oil TP-22C. Technical conditions
TU 38.101821-2013: Turbine oil Тп-22С brand 1. Specifications
TU 38.101950-00: ERA grease (VNIINP-286M)
TU 38.10195-86: Oil standard for rubber testing (SZHR)
TU 38.10818-80: Grease VNII NP-280
TU 38.401-67-108-92: Gasoline-solvent for the rubber industry. Technical conditions
TU 38-101937-83: Oil softener for the rubber industry
TU 38-103508-81: Silicone compounds. Type
TU 38-303-04-06-90: Sublayers for organosilicon sealing materials. Technical specifications
TU 39-1435-89: Oil for transportation to consumers. Technical conditions
TU 5718-001-58528024-04: BITREK Technical Specifications. Bitumen Resin Environmentally Friendly Composite Materials
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.