SNiP 3.04.03-85
СНиП 3.04.03-85
|
|
Protection of construction structures and facilities from corrosion
Защита строительных конструкций и сооружений от коррозии
Status: Not effective - Not applicable. Order of the Ministry of Construction of Russia No. 965
The rules and regulations apply to the construction of new, expansion, reconstruction and technical re-equipment of existing enterprises, buildings and structures and should be observed when constructing anti-corrosion coatings of metal, concrete, reinforced concrete and brick building structures, as well as technological equipment when applying coatings to protect against corrosion under the influence of aggressive environments of industrial plants and groundwater
Нормы и правила распространяются на строительство новых, расширение, реконструкцию и техническое перевооружение действующих предприятий, зданий и сооружений и должны соблюдаться при устройстве антикоррозионных покрытий металлических, бетонных, железобетонных и кирпичных строительных конструкций, а также технологического оборудования при нанесении покрытий для защиты от коррозии, возникающей под воздействием агрессивных сред промышленных производств и грунтовых вод
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
12/13/1985
SKU: RUSS17251
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.20 Basic provisions for reliability of building structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.99 Protection of buildings, inside and out, other aspects »
As a Replacement Of:
SNiP III-23-76: Protection of building structures and facilities from corrosion
The Document References:
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 21.513-83: System of building documents. Anticorrosive protection of building structures. Working drawings
GOST 24444-80: Industrial equipment. General installation and technological requirements
GOST 263-75: Rubber. Method for the determination of Shore A hardness
GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control
GOST 9.304-84: Unified corrosion and ageing protection system. Metallizing coatings. Designations, technical requirements and methods of control
GOST 9.402-80: Metal surface preparation for painting
SNiP II-15-74: Foundations of buildings and structures
SNiP III-23-76: Protection of building structures and facilities from corrosion
The Document is Referenced By:
GOST 22130-86: Steel Pipeline Parts
Movable supports and suspensions
Specifications
GOST 25772-83: Steel guard railing of stairways, balconies and roofs. General specifications
GOST 26804-86: Metal road safety barriers. Specifications
GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications
GOST 34823-2022: Trunk pipeline transport of oil and petroleum products. Organization and performance of construction and installation works on the territory of permafrost soils spreading
GOST R 53491.1-2009: Pools. Treatment of water. Part 1. General requirements
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 55561-2013: Inland water transport. Dock and harbour hydraulic structure. Safety requirements
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities
Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures
Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures
Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures
Manual for SNiP 2.09.03-85: Design Guide for Anchor Bolts for Securing Building Structures and Equipment
Manual for SNiP 2.09.03-85: Manual on designing stand-alone supports and overpasses for process pipelines
Manual for SNiP 2.09.03-85: Conveyor Gallery Design Guide
Manual for SNiP 2.09.03-85: Design of open crane overpasses
Manual for SNiP 2.09.03-85: Design of retaining walls and basement walls
Manual for SNiP 3.04.01-87: Recommendations on the arrangement of floors (in development of SNiP 3.04.01-87 "Insulating and finishing coatings")
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
MDK 2-04.2004: Methodological manual for the maintenance and repair of housing
MDS 11-5.99: Procedure Guidelines On The Expert Appraisal of Engineering Survey for the Feasibility Study (Projects, Draft Projects) of the Construction Units
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-30.2006: Guidelines for the norms, rules and techniques for the implementation of finishing works
MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work
MDS 12-7.2000: Guidelines On Procedure for State Supervision for Compliance with Construction Standards and Codes during Construction and Installation Activities at Industrial Facilities
MGSN 2.08-01: Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MGSN 5.02-99: Design of Urban Bridge Structures
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
MRR 2.2.07-98: Methods of Inspecting Buildings and Structures Prior to Their Rehabilitation and Alteration
NTP-APK 1.10.11.001-00: Engineering Design Standards for Silage and Haylage Storage Facilities
ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts
ODM 218.2.026-2012: Design and calculation guidelines for pile-anchor structures of highways
ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
PB 08-83-95: Requirements for the Organization and Safe Operation of Underground Storage Facilities for Natural Gas in Salt Deposits
PNAE G-05-035-94: Considerations external actions of natural and anthropogenic nature on nuclear and radiation hazardous objects
PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Applications
PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)
RB-005-98: Requirements to Certification of Building Structures Important for Safety of Nuclear Facilities
RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities
RD 03-33-95: Guidelines for Supervision of Construction and Installation Practices at Nuclear and Radiation Hazardous Facilities
RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines
RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities
RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2
RD 153-34.1-21.324-98: Method for Inspection of Wall Enclosures of Buildings and Structures at Thermal Power Stations
RD 153-34.1-21.326-2001: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 1: Reinforced Concrete and Concrete Structures
RD 153-39.4-056-00: Main crude pipeline. Operations rules.
RD 31.35.01-80: Guidelines for corrosion protection of marine port facilities designed for handling chemicals. Minmorflot, Soyuzmorniiproekt, 1980
RD 31.35.10-86: Port facilities and aquatic areas operation rules
RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34.21.408-95: Guidelines for Acceptance of Smokestacks Under Construction
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2
RD EO 1.1.2.05.0696-2006: Guidelines for the construction and commissioning of the foundations of turbine units of nuclear power plants
RD GM-01-02: Guidance Document for Corrosion Protection of Mechanical Equipment and Special Steel Structures of Hydraulic Structures
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 251: Rules for the technical operation of communal heating boiler houses
RM 4-264-92: Automation systems. Recommendations for the design of steel structures for wiring and installation of automation equipment
RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg
SanPiN 4607-88: Sanitary rules governing working with mercury, its compounds, and mercury-filled instruments.
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.04.01-87: Insulation and finishing coatings
SO 153-34.21.408-2003: Recommendations for acceptance of construction, reconstruction and repair of chimneys of thermal power plants and boiler rooms
SP 120.13330.2012: Subway systems
SP 12-95: Instructions for the design of objects of internal affairs bodies (police) of the Ministry of Internal Affairs of Russia
SP 32-105-2004: Subways
SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85
SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines
SP 471.1325800.2019: Building Information Modeling. Quality control of construction works
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
ST RK 1278-2004: Road restrictions systems. Metal safety barriers. Specification
STO DOKTOR BETON 68686983-003-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technologies execution and methods estimation of quality
TR 137-03: Technical recommendations on the use of dry specialized finishing mixtures for exterior and interior work in the construction of new buildings and structures, reconstruction and repair
TR 148-03: Technical recommendations on the technology of industrial interior decoration in the reconstruction and overhaul of residential and public buildings
TR 149/2-05: Technical recommendations on the technology of using a complex of finishing materials for major repairs, rehabilitation and reconstruction of building facades
TR 161-05: Technical recommendations on the design, installation and operation of hinged facade systems
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TR 94.03.1-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 94.03.1: Installation of Precast Concrete and Reinforced Concrete Structures for Sub-Grade P
TR 94.03.2-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 03.2: Construction of Super-Structures Made from Precast Reinforced Concrete Elements
TR 98-99: Guide to Good Practice for Installation of Wall and Floor Coverings Made of Large-Size Ceramic Tile
TSN 12-302-95 SO: Thermal insulation and sealing of joints of external walls and gaps between window and door blocks and a wall in residential and public buildings with polyurethane foam
TSN 12-303-95 SO: Thermal insulation of the floor of the first floor and floors over unheated rooms and driveways in residential and public buildings with polyurethane foam
TSN 12-304-95 SO: Thermal insulation of floors with polyurethane foam when combined roofing
TSN 12-305-95 SO: Thermal insulation of external walls of residential and public buildings with polyurethane foam
TSN 12-306-95 SO: Thermal insulation of floors in residential and public buildings with unheated attic polyurethane foam
TSN 12-307-95 SO: Thermal insulation of pipelines with polyurethane foam
TSN 20-303-2006: Protection of building structures, buildings and structures from aggressive chemical and biological environmental influences. St. Petersburg
TSN 31-332-2006: Residential and public high-rise buildings
TSN 50-304-2000: Foundation Beds, Foundations, and Underground Structures
TSN 52-302-2003: Corrosion Protection of Concrete and Reinforced Concrete Structures of Transport Facilities
TSN 66-301-99: Requirements for Paints and Coatings Used in Construction Practices in the Moscow Region
TU 1469-001-01297858-98: Rings support-guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case). Technical conditions
TU 5210-001-25432924-2008: Fences, road, metal, barrier type
TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type
TU 5216-021-00110604-06: Fences bridge, holding, for cars, side, first type, double-sided
TU 5216-024-00110604-06: Fences bridge, holding, for cars, side, first type, double-sided
TU 5216-025-00110604-2006: Road safety rails, for vehicles, lateral, first type, double-sided
TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal
VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)
VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation
VSN 130-92: Execution and Acceptance Requirements for Sealing Joints and Openings in Precast Tunnel Lining Installed Using Tunnel Boring Methods
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 349-87: Welding of Galvanized Steel Ribbed Roof Decks for Light-Weight Roofing
VSN 362-87: Disinfections and Etching of Pipelines
VSN 3-94: Industry-Specific Building Code for the Installation of Underground Cold Water Supply Pipelines Made of Steel Pipe 300-600 mm in Diameter with Internal Cement-Sand Insulation
VSN 406-87: Installation of Process Equipment for Ore Dressing and Sintering Plants
VSN 4-94: Industry-Specific Building Code for Installation of Heating Supply Networks with Pipes Insulated with Cold-Applied Heat-Resistant Bitumen-Rubber Mastic
VSN 506-88: Design and construction of ground anchors
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.