GOST 19282-73

ГОСТ 19282-73

Low-alloyed plate strip universal steel. Specifications

Сталь низколегированная толстолистовая и широкополосная универсальная Технические условия

Status: Not effective - Superseded. IUS 1-1990

The standard applies to plate, broadband universal and rolled low-alloy steel used in construction and engineering for welded and non-welded metal structures and used in products, mainly without additional heat treatment. Regarding the norms of chemical composition, the standard also applies to thin sheet, ingots, slabs, blooms, forgings and stampings, rolled sections and shapes

Стандарт распространяется на толстолистовую, широкополосную универсальную и рулонную низколегированную сталь, применяемую в строительстве и машиностроении для сварных и несварных металлических конструкций и используемую в изделиях, в основном, без дополнительной термической обработки. В части норм химического состава стандарт распространяется также на тонкий лист, слитки, слябы, блюмсы, поковки и штамповки, сортовой и фасонный прокат

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 12/24/1973

SKU: RUSS17260

Price: $40.00

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.1 Ferrous metals »

ISO classifier » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National standards » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V33 Sheets and Stripes »

The Document is Replaced With:

GOST 19281-89: Rolled steel with increased strength. General specifications

The Document References:

GOST 12344-78: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-80: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen

GOST 12361-82: Alloyed and high-alloyed steels. Methods for determination of niobium

GOST 14019-80: Metals. Methods of bend tests

GOST 14637-79: Rolled thick-plate and wide-band universal of carbon steel for general use. Specification

GOST 1497-84: Metals. Methods of tension test

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 18895-81: Steel. Method of photoelectric spectral analysis

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 20560-81: Alloy and high-alloy steels. General requirements for methods of analysis

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests

GOST 7566-81: Rolled stock and products for further treatment

GOST 82-70: Universal hot-rolled steel wide strips. Dimensions

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

The Document is Referenced By:

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

GOST 10527-84: Four-wheel bogies of passenger cars for mainline railways gauge 1520 mm. Specifications

GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications

GOST 10706-63: Electric welded longitudinal steel pipes. Technical requirements

GOST 11004-84: Principal ventilation mine blowers

GOST 1561-75: Air reservoirs for railway car automatic brakes. Specifications

GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications

GOST 19281-73: Low alloyed sorted and shaped steel

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 20295-74: Steel welded pipes for main gas and oil pipelines

GOST 20804-81: Profiles bent and stripes perforated of steel for wiring. General specifications

GOST 21807-76: Concrete mixture conveying buckets to 2 cub m volume. General specifications

GOST 22130-86: Steel Pipeline Parts Movable supports and suspensions Specifications

GOST 22419-77: Universal platforms for railroad with gauge of 750 mm. Specification

GOST 22584-88: Rope electric hoists. Specifications

GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 25715-83: Steel hot-rolled rectangular steel slab (slabs). Specification

GOST 26887-86: Platforms and ladders for civil engineering work. Specifications

GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications

GOST 27702-88: Steel and alloys. Unified grades

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 28012-89: Demountable travelling stage. Specifications

GOST 28434-90: Overhead travelling stacker cranes

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 6619-75: Single and double horned lamellar hooks. Specifications

GOST 6899-75: Manual hoists and trolleys. General specifications

GOST 7890-84: Travelling single-girder suspended cranes. Specifications

GOST 82-70: Universal hot-rolled steel wide strips. Dimensions

GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities

Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction

Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)

Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083

Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP

Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems

Manual for SNiP 2.04.02-84: Cooling Tower Design Guide

Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment

Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants

Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems

Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks

Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV

Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures

Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial

Manual for SNiP II-37-76: Manual for the use of steel pipes for the construction of gas supply systems

Manual for SNiP II-94-80: Manual for the design and installation of rigid reinforcement of vertical shafts of mines and mines

Manual to SN 527-80: Manual to SN 527-80. On the strength design of the technological steel pipelines at Py up to 10 Mpa

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies

ODN 218.0.032-2003: Interim Guidelines for Determining the Carrying Capacity of Bridge Structures on Roads

OST 102-45-85: Parts of pipelines seamless welded at PN up to 10.0 MPa (100 kgf / cm2). General specification

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

OST 108.030.30-79: Stationary structural steel boilers. General specifications.

OST 108.030.45-82: Tubular air heaters for stationary boilers. General Specifications.

OST 108.320.102-78: Carbon and silicon manganese steels seamless pipes for pipelines of CHP plants. Standard gauge.

OST 24.030.45-74: Air heaters tubular steam stationary boilers. General technical conditions

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.090.39-78: Shell stacker cranes. Specifications.

OST 24.090.39-83: Shell stacker cranes. General specifications.

OST 24.090.50-79: Cargo slings. Technical requirements.

OST 24.125.30-89: Carbon and silicon manganese steels seamless pipes for pipelines of nuclear thermal power plant. Standard gauge.

OST 24.191.08-81: Hook crane suspensions. Design and dimensions.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-01-49-82: Assembling units and pipeline details for working pressure of 32 MPa (320 kgf/cm2). General specifications.

OST 26-04-2387-79: Steel plugs to test vessels and apparatus for Py 0.1 MPa (1 kg/cm2), Py 0.6 MPa (6 kg/cm2). Design and dimensions.

OST 26-1046-87: High-pressure vessels and devices. Norms and methods of endurance calculation.

OST 26-11-04-84: Steel vessels and devices. Allowable stress.

OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.

OST 34-13-910-86: Cargo rope slings for construction. Technical conditions

OST 34-42-569-82: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-42-658-84: Parts and assembly units of NPP pipelines Rwork <2.2 MPa (22 kgf/cm2) T ≤ 350 ° C. Pipes and stock. Assortment.

OST 34-42-747-85: Details and prefabricated units of TPS pipelines, working P<2.2 MPa (22 kg/cm2), t ≤545 °C. Pipes and rolling. Pipe grades.

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

OST 34-42-836-86: Flat Flanges for pipes of TPP and NPP. Design and dimensions.

OST 35-09-86: Hoisting machinery and equipment. General specifications.

OST 35-22-83: Pipe culverts made of corrugated metal intended for railroad and auto road. Specifications.

OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.

OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-58-81: Steel building structures. Welding. Basic requirements.

OST 36-60-81: Welding at installation of steel building constructions. Main provisions.

OST 36-62-81: Hoisting equipment. General technical requirements.

OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.

OST 66-14-86: Ferroconcrete complex plates. Specification.

P 780-83/Gidroproekt: Manual on the design of steel-reinforced concrete structures of hydraulic structures

PB 03-108-96: Process pipeline design and safe operation rules

PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PVKM 79: Instructions for the design of railway temporary and short-term bridges and pipes

R 001-98: Guide to the design of steel structures of objects of large-volume blast furnaces

R 412-81: Recommendations for the design and construction of offshore subsea oil and gas pipelines

RD 12.18.099-90: Instructions for the design and installation of reinforcement for vertical shaft shafts with fastening reinforcement elements on anchors

RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines

RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks

RD 153-34.1-39.401-00: Procedural Guidelines for Initial Adjustment of Piping Systems at In-Service Thermal Power Stations

RD 2201-8-80: Building and road machines. Standard values ​​of stress concentration factors and changes in residual stresses in welded units

RD 22-157-86: Shovel excavators. Swivel platforms and running frames. Strength calculation

RD 22-158-86: Shovel hydraulic excavators. Work equipment. Calculation of metal structures for static strength

RD 22-207-88: Lifting machines. General requirements and production standards

RD 24.030.142-88: Methodological instructions. Selection of steel products for construction of stationary boilers.

RD 24.031.15-88: Methodological instructions. Designing stationary boilers steelworks.

RD 24.942.02-90: Electroslag welding of chemical and petroequipment from low-alloyed and heat-resistant steels

RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.

RD 26-01-28-86: Pipelines and high-pressure apparatus for ammonia and methanol production. Steel grades. Terms of use

RD 26-07-264-86: Anticorrosive weld deposit of sealing surfaces of pipeline fittings.

RD 31.31.27-81: Guidelines for design of maritime mooring facilities. Ministry of Marine Fleet, Soyuzmorniiproekt 1981

RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures

RD 31.44.05-80: Crane metalwork. Repairs. Technical specifications

RD 31.46.07-87: Rope grabs for bulk cargo. Typical strength calculations. Technique

RD Spare parts for gantry cranes of foreign construction. Assembly units and parts. Technical requirements

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

RD 39-3-126-78: Methods of calculating consumption rates and analysis of the consumption of rolled ferrous and non-ferrous metals

RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.

RD 50:48:0075.02.05: Platform buffers. Recommendations for design, construction and operation

RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks

RD 51-553-94: Instructions for technical certification of gas accumulators GSS-1-1-10,0-25U-001 during the operation of gas filling stations of gas compressor stations (AGNKS)

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RSN 68-87: Design of industrial and civil buildings of the West Siberian oil and gas complex

RTM 108.023.20-83: Vertical rotary-blade axial and radial-axial hydraulic turbines. Metal consumption limit

RTM 1652-9-89: Guide to engineering survey, assessment of the quality and reliability of building structures of buildings and structures

RTM 26-303-78: Isothermic Tanks for Liquefied Hydrocarbon Gas. Standards and Calculation Methods

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

SNiP 2.06.09-84: Hydrotechnical tunnels

SNiP II-58-75: Thermal power stations

SP 102.13330.2012: Hydraulic tunnels

SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities

SP 53-101-98: Manufacturing and quality control of steel structures for construction

TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications

TU 14-105-465-82: Hot-rolled plate steel, heat-treated 14G2AF. Pilot batch

TU 14-11-262-89: Cold-Rolled Thin-Sheet Roofing Products

TU 14-2-287-77: Steel bent channel equal-shelf. Technical conditions

TU 14-3-1128-82: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions

TU 24-09.411-82: Special electric bridge cranes

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 36-2287-80: Bent closed welded square and rectangular profiles

VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation

VSN 01-75: Instructions for Designing the Steel Vertical Tanks for Oil and Oil Products

VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

VSN 169-80: Guidelines for Using Manual and Automated Welding in Shop-Fabrication of Structural Steel Components for Bridges

VSN 185-85: Strength calculation of manifold pipelines

VSN 315-80: Manual to design heat units liners for oil refining industry made of light refractory concrete and heat insulating materials.

VSN 350-75: Standard Dimensions and Properties for Pipes Used in Process Piping Systems Made of Alloy and High-Alloy Steel and Operating at Nominal Pressure Less Than or Equal to 100 kgf per sq. cm

VSN 41.88: Design of ice-resistant stationary platforms

VSN 429-81/MMSS SSSR: Instruction for the design of lining for the industrial furnaces, made of refractory fibrous materials

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00
Water quality. Sewage water
Language: English
Price: $120.30
Passenger cars. Windscreen defrosting and demisting systems. Technical requirements and test methods
Language: English
Price: $97.00
Passenger cars. Windscreen wiper and washer systems. Technical requirements and test methods
Language: English
Price: $171.00


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!