GOST 21779-82
ГОСТ 21779-82
|
|
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Система обеспечения точности геометрических параметров в строительстве Технологические допуски
Status: Effective
The standard applies to the design and construction of buildings and structures, as well as the design and manufacture of elements for them (structures, products, parts) and establishes the basic principles of regulation, the range and values of technological tolerances of geometric parameters. The standard does not establish surface roughness tolerances. In accordance with the requirements of this standard, the newly developed and revised standards and other regulatory and technical documentation establish the accuracy of: the manufacture of elements from various materials; performance of marking works in the construction of buildings and structures and installation of process equipment; performance of construction and installation works. If necessary, the use of landings of building elements with negative and zero gaps should be guided by the standards of ST SEV 145-75, ST SEV 144-75 and GOST 6449-76.
Стандарт распространяется на проектирование и строительство зданий и сооружений, а также проектирование и изготовление элементов для них (конструкций, изделий, деталей) и устанавливает основные принципы регламентации, номенклатуру и значения технологических допусков геометрических параметров. Стандарт не устанавливает допуски шероховатости поверхностей. В соответствии с требованиями настоящего стандарта во вновь разрабатываемых и пересматриваемых стандартах и другой нормативно-технической документации устанавливают точность: изготовления элементов из различных материалов; выполнение разбивочных работ при строительстве зданий и сооружений и монтаже технологического оборудования; выполнения строительных и монтажных работ. При необходимости применения посадок строительных элементов с отрицательными и нулевыми зазорами следует руководствоваться стандартами СТ СЭВ 145-75, СТ СЭВ 144-75 и ГОСТ 6449-76.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
6/10/1982
SKU: RUSS17261
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.24 Dimensional interchangeability and compatibility »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
01.100.30 Construction drawings »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
01.100.30 Construction drawings »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.30 Technical aspects »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.30 Technical Aspects »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh0 General rules and regulations for construction and building materials »
Zh02 Design and calculation norms »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Design Documentation System for Construction (SPDS) »
As a Replacement Of:
GOST 21779-76: System for ensuring geometric accuracy in construction. Technological tolerances of geometric parameters
The Document References:
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 21780-76: System for ensuring geometric accuracy in construction. General rules for calculating accuracy
GOST 23615-79: System of ensuring accuracy of geometrical parameters in construction. Statistical analysis of accuracy
GOST 6636-69: Standard linear dimensions
The Document is Referenced By:
GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 12767-2016: Reinforced concrete solid slabs for floors in lange-panel buildings. General specifications
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 20850-2014: Wooden glued load bearing structures. General specifications
GOST 20850-84: Wooden laminated structures. General specifications
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 23118-2012: Building steel structures. General specifications
GOST 23118-78: Structural metalwork. General specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23407-78: Fencings for building sites. Specifications
GOST 23478-79: Form for monolithic concrete and reinforced concrete structures erection. Classification and general technical requirements
GOST 23615-79: System of ensuring accuracy of geometrical parameters in construction. Statistical analysis of accuracy
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications
GOST 25781-83: Steel moulds for reinforced concrete members. Specifications
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26433.2-94: System of ensuring geometric parameters accuracy in building. Rules for measuring parameters of buildings and works
GOST 26434-2015: Reinforced concrete panels for floors in residential buildings. Types and basic parameters
GOST 26434-85: Reinforced concrete panels for floors in residential buildings. Types and basic parameters
GOST 28984-2011: Modular coordination of construction dimensions. General.
GOST 28984-91: Modular size coordination in building engineering. Basic rules
GOST 31173-2003: Steel doors. Specifications
GOST 31174-2003: Gates of metall. General specifications
GOST 31174-2017: Gates of metall. General specifications
GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 34329-2017: Formworks. General specifications
GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST 475-2016: Door Blocks wooden and combined. General specifications
GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications
GOST R 57997-2017: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
Manual for SNiP 3.01.01-85: Manual on the development of construction projects and agricultural production projects
Manual for SNiP 3.01.01-85: Development of projects for the organization of construction and work projects for the reconstruction of existing enterprises, buildings and structures. Reference manual to SNiP
Manual for SNiP 3.01.01-85: Development of projects for the organization of construction and work projects for industrial construction
Manual for SNiP 3.01.01-85: A guide to the development of projects for the organization of the construction of large industrial complexes using the nodal method
Manual for SNiP 3.01.01-85: A guide for the development of construction organization projects and civil works construction projects
Manual for SNiP 3.01.01-85: A guide for the organization of high-speed construction of roads and airfields using sets of machines of the DS-100 type
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
MDS 11-19.2009: Interim recommendations for organization of technology geodetic quality construction of multifunctional high-rise buildings
MDS 11-20.2009: Methodics of precision noncontact executive survey of hinged facade systems with air gaps in the construction of tall buildings
MDS 12-1.98: Recommended Practice for Development of Quality Systems in Construction and Installation Organizations (Based on ISO 9000 Standards)
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
MDS 12-7.2000: Guidelines On Procedure for State Supervision for Compliance with Construction Standards and Codes during Construction and Installation Activities at Industrial Facilities
MDS 13-24.2010: Recommendations on the rules of geotechnical support of high-rise construction and adjacent space
MR 21.02-95: Recommended Practice for Procedure for Designating Accuracy Characteristics in Construction Drawings
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters
R 391-80: Guidelines for the metrological assurance of the construction of underwater crossings of main pipelines
RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 12-21-2013 Sankt-Peterburg: Typical temporary means of fencing, arranging and decorating construction sites
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.06.04-91: Bridges and pipes
SNiP III-16-80: Prefabricated concrete and reinforced concrete structures
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation
SP 414.1325800.2018: Fixed formwork. Design rules
SP 443.1325800.2019: Bridges with aluminum alloy structures. Design rules
SP 452.1325800.2019: Residential multi-apartment buildings with the use of wooden structures. Design rules
SP 46.13330.2012: Bridges and pipes
SP 470.1325800.2019: Steel structures. Work Rules
SP 59.13330.2020: Accessibility of buildings and structures for people with limited mobility SNiP 35-01-2001
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 83.13330.2016: Industrial furnaces and brick chimneys
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TR 149/2-05: Technical recommendations on the technology of using a complex of finishing materials for major repairs, rehabilitation and reconstruction of building facades
TR 161-05: Technical recommendations on the design, installation and operation of hinged facade systems
TR 210-09: Technical recommendations (manual) on the construction technology of underground collector tunnels of rectangular section with the use of tunnel boring complexes with all-section lining
TSN 12-309-97 SO: Lightweight partitions
TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications
TU 102-462-88: Frame Asbestos-Cement Wall and Roof Panels with Mineral Wool Insulation
TU 102-463-88: Frameless three-layer roofing panels with mineral wool insulation
TU 102-464-88: Three-layer aluminum frame wall panels with mineral wool insulation
TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
