GOST 356-80

ГОСТ 356-80

Valves and details for piping. Pressures conditional, test and operational. Lines.

Арматура и детали трубопроводов Давления условные пробные и рабочие Ряды

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 2346 dated 02.08.90

The standard applies to valves and pipeline parts (tees, elbows, elbows, transitions, flanges, etc.) and establishes a series of nominal, test and operating pressures. The standard does not apply to assembled pipelines, valves and parts of pipelines covered by the “Rules for the Construction and Safe Operation of Equipment for Nuclear Power Plants, Experimental and Research Nuclear Reactors, and Installations”, as well as to volumetric hydraulic drives, pneumatic drives and lubrication systems.

Стандарт распространяется на арматуру и детали трубопроводов (тройники, колена, отводы, переходы, фланцы и др.) и устанавливает ряды номинальных, пробных и рабочих давлений. Стандарт не распространяется на трубопроводы в собранном виде, арматуру и детали трубопроводов, на которые распространяются «Правила устройства и безопасной эксплуатации оборудования атомных электростанций, опытных и исследовательских ядерных реакторов, и установок», а также на объемные гидроприводы, пневмоприводы и смазочные системы.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 24

Approved: USSR State Committee for Standards, 1/29/1980

SKU: RUSS17262

Price: $97.02




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.2 Calculations » 8.2.1 Strength calculations »

Standards for pipe fittings (TPA) » 1. Fundamental standards for injection molding machines » 1.1 Terminology »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G10 Classification, nomenclature and general rules »


As a Replacement Of:

GOST 356-68: Pressure - conditional, testing and working for valves and connecting parts of pipelines

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 1215-79: Malleable iron castings

GOST 1412-85: Flakish graphite cast iron

GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades

GOST 17711-93: Cast copper-zink alloys (brass). Grades

GOST 18175-78: Tin-free pressure-worked bronzes. Grades

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

GOST 20072-74: Heat-resistant steel

GOST 380-2005: Common quality carbon steel. Grades

GOST 4543-71: Structural alloyed steel

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 613-79: Tin foundry bronzes. Grades

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 977-88: Steel castings. General specifications

The Document is Referenced By:

ATK 24.200.02-90: Album typical designs. Flanged steel plugs. Design, dimensions and specifications

ATK 24.203.04-90: Pipeline connections with flanging of copper tubes. Types, dimensions and technical requirements

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

ATK 26-18-13-96: Flanges for reinforcing connecting parts and pipelines for corrosive environments on Ru from 0.6 to 16.0 MPa. Design, dimensions and general technical requirements

ATK 26-18-5-93: Album typical designs. Steel turning plugs for rebar flanges. Design, dimensions and specifications

GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage

GOST 11379-80: Dynamic Pumps for waste liquids. General specifications

GOST 11823-91: Check valves for stipulated pressure of pn < 25 MPa (250 kgf/sm2)

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 12.3.046-91: Occupational safety standards system. Automatic fire-fighting sets. General technical requirements

GOST 12532-88: Direct-acting safety valves. Main parameters

GOST 12678-80: Direct-acting pressure regulators. Main parameters

GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 12997-84: SSI Products. General specifications

GOST 13045-81: Rota meters

GOST 13196-93: Means of level measuring and sampling of oil and oil products

GOST 13252-73: Check valves reversible rotary, made of steel for design pressure Pd 16 MPa (160 kgf / cm2) Technical requirements

GOST 13252-91: Swing check valves for Pnom £25 MPa (250 kgf/cm2). General specifications

GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications

GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)

GOST 14012-76: Tachometric ball-based flowmeters SSE. Specification

GOST 14187-84: Plug valves. Overroll dimensions

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 16324-83: Cast iron diaphragm control valves with pneumatic diaphragm actuator

GOST 16587-71: Safety valves, control valves and pressure regulators. Face-to-face lengths

GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications

GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications

GOST 18140-84: SSI differential pressure gauges. General specifications.

GOST 19334-73: Connection parts for pipe-lines and metal-reinforced hoses. Types, basic dimensions and technical requirements

GOST 20572-83: Two-screw pumps and pump units. Specification

GOST 20772-81: Connecting devices for technical means for fuelling, pumping, loading-unloading, transport and storage of raw oil and petroleum products. Types, basic parameters and sizes. General technical requirements

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)

GOST 21744-83: Multilayer metal bellows. General specifications

GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp

GOST 22521-85: Pressure, vacuum and pressure difference transmitters with pneumatic analogue output signal of gsp (state system of industrial devices and automation systems)

GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 23720-79: Venturi tubes. Specifications

GOST 23866-87: Single-seated, double-seated and cellular

GOST 24095-80: Stop valves with diaphragm of cast-iron. Specification

GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 25164-96: Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 26227-84: Level gauges and sensors of the level of industrial application of GSP. General specifications

GOST 26582-85: Food (manufacturing) industry machines and equipment

GOST 26969-86: Standard orifice plates for flow meters. Specifications

GOST 27036-86: Bellows metal expansion joints and seals

GOST 2822-78: Threaded ends of marine valves and fittings. Types, main characteristics and dimensions and technical requirements

GOST 28697-90: Programme and test methods of bellows compensators and seals. General requirements

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 30146-95: Machines and equipment for production of sausages and meat semi-finished products

GOST 30776-2002: Oil field mobile pumping units. General specifications

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31845-2012: Gas fuel locomotives. Explosion safety requirements

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 3326-86: Stop valves, check lift and swing valves. Overall dimensions

GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5761-74: Valves for nominal pressure

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications

GOST 6127-52: Bath valves. Technical requirements

GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions

GOST 6616-94: Thermoelectric converters. General specifications

GOST 6651-2009: State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods

GOST 6651-94: Thermal converters of resistance. General technical requirements and test methods

GOST 8944-75: Ductile iron and steel fittings with parallel thread for pipelines. Technical requirements

GOST 8965-75: Connecting parts made of steel, with parallel thread, for pipelines of pressure p = 1.6 мpа

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9400-81: Threaded connecting ends for valves, fittings and pipes with tens - shaped seals for pn20-100 mpa (200-1000 kgf/cm2) dimensions

GOST 9544-75: Pipeline stop valves. Standards for disc tightness

GOST 9652-68: Shutoff Devices of level indicators of liquids for Pd up to 40 kgf / cm2. Specification

GOST 9789-75: Safety spring full-lifted flanged steel valves for p stip "1.6 and 4.0 MPa (16 and 40 kgf/cm2)

GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods

GOST R 50194-92: Devices for automation of tank farms. Means for level measurement and sampling of oil products. General technical requirements and test methods

GOST R 50342-92: Thermoelectric converters. General specifications

GOST R 50353-92: Resistive temperature transducers. General specifications

GOST R 50392-92: Fittings for metal bellows expansion joints and seals. Types, main parameters and dimensions. General specifications

GOST R 50618-93: Metal single layer bellows for compensation. Types, general specifications

GOST R 50619-93: Metal multylevels bellows for compensation. Types, general requirements

GOST R 51571-2000: Metal bellows expansion joints and seals. General technical requirements

GOST R 51649-2000: Heat meters for water heat supply systems. General specifications

GOST R 51649-2014: Heat meters for water heat supply systems. General specifications

GOST R 52316-2005: Fire equipment. Thermal equipment trips. General technical requirements. Test methods

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting

GOST R 52931-2008: Instruments for process monitoring and control. General specifications

GOST R 52932-2008: Electromagnetic, ultrasonic, vortex and fluid oscillator counters for water heat supply systems. General specifications

GOST R 53277-2009: Fire equipment. Equipment for maintenance of fire hoses. General technical requirements. Methods of testing

GOST R 53283-2009: Automatic gas fire extinguishing systems. Distributing valves. General technical requirements. Test methods

GOST R 53288-2009: Automatic water and foam extinguishers systems. Automatic fire water mist spray extinguishers systems. Modules. General technical requirements. Test methods

GOST R 53291-2009: Portable and movable devices of fire extinguishing with high-velosity submission of fire quenching matter. General technical requirements. Test methods

GOST R 53401-2009: Gas fuel locomotives. Requirements of explosion safety

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications

GOST R 53790-2010: Non-traditional technologies. Energetics of biowastes. General technical requirements for biogas sets

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 55600-2013: Pipes and pipeline components for pressure over 100 to 320 MPa. Norms and methods of strength calculation

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 8.823-2013: State system for ensuring the uniformity of measurements. Meters for hot water. General metrological and technical requirements

IM 14-51-94, v.2: Guidelines and explanations on topical issues of development of automation systems. Release 2. General questions of application of standard drawings

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

Manual to SN 527-80: Manual to SN 527-80. On the strength design of the technological steel pipelines at Py up to 10 Mpa

MI 2538-99: State system for ensuring uniformity of measurements. Heat meters for water systems water supply COP ***. General metrological requirements

MR 14-02-2003: Selection and application of selective devices for pressure measuring instruments

NB ZhT TsT 02-98: Diesel locomotives. Safety regulations

NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods

NPB 79-99: Automatic gas fire extinguishing systems. Distribution valves. General technical requirements. Test methods

OST 108.104.07-82: T-joint branches for CHP plant pipelines. Design and dimensions.

OST 108.318.15-82: Joints for CHP pipe lines. Design and dimensions.

OST 108.320.102-78: Carbon and silicon manganese steels seamless pipes for pipelines of CHP plants. Standard gauge.

OST 108.321.15-82: Bent branches for CHP plant pipelines. Design and dimensions.

OST 108.321.16-82: Sharply-bent branches for CHP plant pipelines. Design and dimensions.

OST 108.321.17-82: Sharply-bent branches for CHP plant pipelines. Design and dimensions.

OST 108.504.01-82: Welded bedplates for pipelines of TPS. Construction and dimensions.

OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.472-2000: devices for installation of pressure gauges and pressure selection. General technical requirements.

OST 26-01-1155-75: Pipe input-outputs of steel welded containers and devices. Types and ranges of usage.

OST 26-01-136-81: Assembling units of steel pipelines on pressure over 9,81 to 98,1 MPa (over 100 to 1000 kgf/cm2) of complete technological lines. General specifications.

OST 26-01-342-71: Parts of pipelines. Viewing portholes with flat glass. Design and dimensions

OST 26-02-2053-79: Adapter and hatches made of double-layer steel. Technical requirements .

OST 26-02-2064-83: Adapters for vessels and welded steel apparatus. Types and parameters.

OST 26-02-376-78: Technological units of gas and oil industry. General technical requirements.

OST 26-04-2153-77: Labour safety standard system. Cryogenic equipment. General safety requirements and constructions.

OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.

OST 26-07-1500-77: Wicket rotary shutters. Construction lengths.

OST 26-2000-83: Welded vessels and apparatus hatches. Types.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 34-10-581-93: Lens compensators for Pnom ≤1.6 MPa (16 kg/cm2). General technical requirements.

OST 34-10-699-97: Parts of seamless steel welded pipelines on Rrab <2.2 MPa (22 kgf

OST 34-10-760-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions

OST 5 9137-83: Welding of casting defects in steel and cast iron. Technical requirements

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants

PNST 166-2016: Safety class 4 pipeline valves for technological systems of nuclear stations. General technical requirements

RD 108.021.112-88: Correction of defects in the cast hull parts of steam turbines and valves by welding without heat treatment

RD 153-34.0-20.507-98: Model Guidelines for Operation of Thermal Energy Transportation and Distribution Systems (Piped Heat Supply Networks)

RD 153-34.1-35.417-2001: Guidelines for setting up automatic regulators of turbine equipment of TPPs

RD 153-34.1-39.603-99: Fittings repair manual of high parameters.

RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

RD 26-07-263-86: The leading document. Methodical instructions. Pipeline fittings standard test methods for durability and material density of details and welded seams.

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm

RD 34-10.030-89: Rules for quality control of welded joints of pipelines of nuclear power plants

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-0147103-344-86: Rules for technical operation of collection systems and intra-field transport of oil and gas

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD 39-22-617-81: Uniform safety standards for the development of basic types of oil and gas equipment

RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (

RD 4-VEP: Guiding document on the use of axial bellows expansion joints (KSO-TPZ) for the technical specifications of TU 3-120-81 OAO Tula Cartridge Plant and starting bellows compensators (KSS-TPZ) for the technical specifications of TU 3695-056-08629358- 2000 OJS

RD RTM 26-01-44-78: Piping Components for Use at Pressure Above 10 to 100 MPa. Strength Standards and Calculation Methods

RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource

RM 4-59-95: Automation systems. Composition, design and completion of working documentation

RM 4-6-92: Process automation systems. Design of electrical and pipe wiring. Part 3. Guidelines for the implementation of the documentation. Allowance for RTM 36.22.7-92

RTM 108.711.02-79: Power valves. Methods for determining the capacity of regulatory bodies and the choice of optimal flow characteristics

RTM 26-07-187-75: Casting of parts of pipe fittings of radius of curvature and casting transitions. Wall thickness

RTM 38.001-94: Guidelines for the calculation of strength and vibration of technologically steel pipe.

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa

SNiP I-G.2-62: Water supply and sewage. External networks and facilities. Materials, products and equipment networks

SNiP III-34-74: Automation Systems

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

ST RK 1437-2005: On-board units for locomotive equipment. Design, overall and connection dimensions

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

ST TsKBA 022-2005: General industrial pipeline valves supplied to nuclear power plants. General technical requirements

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements

TU 1462-203-0147016-01: Welding steel connection parts for operation in oil-field environments with increased corrosion activity. Technical conditions

TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK

TU 26-18-38-90: Parts of seamless welded pipelines from steel grades 15Х5М, 12Х1МФ, 12Х18Н10Т, 08Х22Н6Т

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs

TU 36.22.19.05-005-85: Selective pressure measuring devices. Technical conditions

TU 36-1686-82: Bends are steeply curved with an angle of 90 degrees from steel grades 15X5M, 08X18NIOT, 12X18NIOT and 10X17H13M2T seamless welded on the Rou is less than 10 MPa

TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them

TU 3742-001-96231033-2006: Swing check valve type 19s38nzh and 19s73nzh. Technical conditions

TU 4218-008-51216464-01: Selection device. Technical conditions

TU 5.551-19729-88: Bellows Expansion Joints for Piped Heat Distribution Systems. Technical Specifications

VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields

VNTP 5-95: Norms of technological design of enterprises for provisioning with petroleum products (petroleum storage depots)

VSN 301-86: Installation of Piping Made of Glass Pipes

VSN 39-87: Ordinance for Planned Preventive Maintenance and Operation of Production Equipment at Construction Industry Companies Administered by the USSR Gosagprom. Part 1

GOST 4.114-2019: Pipe fittings. Nomenclature of key indicators

GOST R 58367-2019: Arrangement of oil fields on land. Technological design

GOST R 58788-2019: Pipeline fittings of safety class 4 for technological systems of nuclear power plants. General technical requirements

GOST R 8.625-2006: State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistance thermometers. General technical requirements and test methods

POT RZhD 4100612-CT-613-2015: Temporary rules on labor protection during the operation of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive

RD 24.212.06-90: Compressors Estimated parameters. Terms and conventions

TU 1468-001-17192736-01: Seamless welded bends made of alloy and high alloy steel

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45
Aviation fuels. Calculating net calorific value
Language: English
Price: $192.06
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!