GOST 12816-80
ГОСТ 12816-80
|
|
Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
Фланцы арматуры, соединительных частей и трубопроводов на Ру от 0,1 до
20,0 МПа (от 1 до 200 кгс/см кв.). Общие технические требования
Status: Not effective - Canceled in the Russian Federation. Registration information 99-st dated 03/01/2016 (official website of Rosstandart); (IUS 6-2016)
The standard applies to the flanges of pipelines and connecting parts, as well as to the connecting flanges of valves, machines, instruments, nozzles of apparatuses and tanks for a nominal pressure Py from 0.1 to 20 MPa (from 1 to 200 kgf
Стандарт распространяется на фланцы трубопроводов и соединительных частей, а также на присоединительные фланцы арматуры, машин, приборов, патрубков аппаратов и резервуаров на условное давление Py от 0,1 до 20 МПа (от 1 до 200 кгс/см кв.) и температуру среды от 20 до 873 К (от минус 253 до плюс 600 °С). Стандарт не распространяется на фланцы трубопроводов транспортных машин, если эти фланцы не предназначены для присоединения арматуры или приборов общего назначения, а также на фланцы, стандартизованные ГОСТ 1536-76 и ГОСТ 4433-76.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
5/20/1980
SKU: RUSS17272
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.1 Flanges »
Standards for pipe fittings (TPA) »
6. Standards of connecting sizes of piping valves (TPA) »
6.2 Weld connection »
Standards for pipe fittings (TPA) »
6. Standards of connecting sizes of piping valves (TPA) »
6.1 Flange connection »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
The Document is Replaced With:
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
As a Replacement Of:
GOST 6972-67: Flanges and plugs of flanged valves, connecting parts and pipelines. Marking, packaging and transportation
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 1215-79: Malleable iron castings
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions
GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 1412-85: Flakish graphite cast iron
GOST 14192-96: Cargo marking
GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions
GOST 1536-76: Flanges for ship's pipeline systems. Coupling dimensions and sealing surfaces
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19537-83: Gun grease. Specifications
GOST 20072-74: Heat-resistant steel
GOST 25670-83: Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication
GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 4433-76: Flanges of valves connecting pieces and pipelines for shipping systems. Types
GOST 4543-71: Structural alloyed steel
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 7769-82: Alloyed cast iron for castings with special properties
GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices
GOST 977-88: Steel castings. General specifications
ST SEV 2991-81: Photographic materials in black and white on an opaque substrate. Conditions for determining the optical density in reflected light
The Document is Referenced By:
ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements
ATK 26-01-1-89: Pipeline viewing lights. Types and designs
ATK 26-18-10-94: Devices for Installation of Temperature Measuring Devices for Use at Nominal Pressure from 0.6 to 16.0 MPa. Plugs. General Technical Requirements
ATK 26-18-13-96: Flanges for reinforcing connecting parts and pipelines for corrosive environments on Ru from 0.6 to 16.0 MPa. Design, dimensions and general technical requirements
GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions
GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 12893-83: Single-seated, double-seated and cage control valves.
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 21204-97: Industrial gas burners. General technical requirements
GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
GOST 24569-81: Occupational safety standards system. Steam and hot-water boilers. Marking
GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25660-83: Underwater pipeline sealing flanges 10,0 MPa (100 kgf/sq sm). Design
GOST 26227-84: Level gauges and sensors of the level of industrial application of GSP. General specifications
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31850-2012: Automatic forced draught burners for gaseous fuels. Technical requirements, requirements of safety and test methods
GOST 32388-2013: Process piping. Standard for the stress, vibration and seismic analysis
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications
GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking
GOST R 51383-99: Automatic forced draught burners for gaseous fuels. Technical requirements, safety requirements and test methods
GOST R 52229-2004: Ignition control devices. General specifications
GOST R 52264-2004: Pressure diving chambers. General specifications
GOST R 52316-2005: Fire equipment. Thermal equipment trips. General technical requirements. Test methods
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements
GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements
GOST R 53790-2010: Non-traditional technologies. Energetics of biowastes. General technical requirements for biogas sets
GOST R 54439-2011: Gas fired central heating boilers. Type B boilers of nominal heat input not exceeding 300 kW, but not exceeding 1000 kW
GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking
GOST R 54446-2011: Non domestic gas-fired overhead luminous radiant heaters. Part 1. Safety requirements
GOST R 54448-2011: Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety requirements
GOST R 54821-2011: Gas-fired storage water heaters for the production of domestic hot water
GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST R 55170-2012: Steam and hot-water stationary boilers, heat recovery steam generators. Marking
GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General
GOST R 57217-2016: Medical multi-place hyperbaric chambers with operating pressure 1, 0 MPa. General technical requirements
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.462-99: Devices for installation of instruments measuring the temperature for PN from 0.6 to 16 MPa. Types, design, dimensions and general technical requirements
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-01-1159-75: Pipe input-outputs of steel welded containers and devices. Technical requirements.
OST 26-02-2053-79: Adapter and hatches made of double-layer steel. Technical requirements .
OST 26-02-2070-83: Adapters for vessels and welded steel apparatus. Technical requirements .
OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 34-10-425-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges. Construction and dimensions.
OST 34-10-426-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges to webbings. Construction and dimensions.
OST 34-10-428-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flanged plugs with a joggle. Construction and dimensions.
OST 34-10-504-95: Details and components of TPS pipelines. Flanged connections for disk orifice plates of TPS pipelines for Pnom 2.5 MPa (25 kg/cm2). Construction and dimensions.
OST 34-10-756-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-42-836-86: Flat Flanges for pipes of TPP and NPP. Design and dimensions.
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-0148306-413-88: Method for calculating fugitive emissions from gas processing plants
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
SA-03-003-07: Stressing and vibration calculation of steel industrial pipelines.
ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions
TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions
TU 3799-004-11013589-2004: Flange Isolation Joint (FIS). Technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
