GOST 2177-99
ГОСТ 2177-99
|
|
Petroleum products. Methods for determination of distillation characteristics
Нефтепродукты. Методы определения фракционного состава
Status: Effective
The standard establishes methods for determining the fractional composition of petroleum products. Depending on the conditions of the test, they are carried out in two ways: A - for gasoline, aviation gasoline, aviation fuel for turbojet engines, solvents with a set boiling point, naphtha, white spirit, kerosene, gas oil, distillate liquid fuels and similar petroleum products; B - for oil and dark oil products.
Стандарт устанавливает методы определения фракционного состава нефтепродуктов. В зависимости от условий проведения испытания проводят двумя способами: А - для автомобильных бензинов, авиационных бензинов, авиационных топлив для турбореактивных двигателей, растворителей с установленной точкой кипения, нафты, уайт-спирита, керосина, газойлей, дистиллятных жидких топлив и аналогичных нефтепродуктов; Б - для нефти и темных нефтепродуктов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization and Metrology,
9/21/1999
SKU: RUSS17289
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
013/2011 TR CU. About requirements to automobile and aviation gasoline, diesel and marine fuel, jet fuel and fuel oil »
Regulations and standards (to ТР ТС ТС 013/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.2 Oil, oil products and gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
B Oil products »
B0 General rules and regulations for oil refining industry »
B09 Test methods. Packaging. Marking »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 2177-82: Petroleum Products Fractionation Method
The Document References:
GOST 12026-76: Filter paper for laboratory application
GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure
GOST 1756-52: Petroleum products. Determination of saturated vapors pressure
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 2177-82: Petroleum Products Fractionation Method
GOST 2477-2014: Petroleum and petroleum products. Method for determination of water content
GOST 2477-65: Petroleum and petroleum products. Method for determination of water content
GOST 2517-2012: Petroleum and petroleum products. Methods of sampling
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
GOST 4166-76: Reagents. Sodium sulphate. Specifications
GOST 4233-77: Reagents. Sodium chloride. Specifications
The Document is Referenced By:
GOST 1.3-2008: Interstate System for Standardization. Adoption rules and methods for international and regional standards as interstate standards
GOST 1012-2013: Aviation petrols. Specifications
GOST 1012-72: Aviation petrol
GOST 10214-78: Petroleum solvent. Specifications
GOST 10227-2013: Jet fuels. Specifications
GOST 10227-86: Jet fuels
GOST 12308-2013: Thermostable fuels T-6 and T-8B for jet engines. Specifications
GOST 12308-89: Thermo stable t-6 and t-8b fuels
GOST 1667-68: Motor fuel for medium- and low-speed diesel engines
GOST 18187-72: Solvents of РЭ type for electrocoating. Specifications
GOST 18995.7-73: Organic chemical products. Methods for determination of boiling range
GOST 19932-99: Petroleum products. Determination of carbon residue. Conradson method
GOST 2070-82: Light petroleum products. Methods for determination of iodine numbers and content of unsaturated hydrocarbons
GOST 2084-77: Mobile gasoline Specifications
GOST 21046-86: Waste petroleum products
GOST 305-2013: Diesel fuel. Specifications
GOST 305-82: Diesel fuel. Specifications
GOST 30745-2001: Agricultural tractors. Measurement of propulsion performance characteristics
GOST 30747-2001: Agricultural tractors. Measurement of characteristics tested through the power take-off shaft
GOST 30749-2001: Agricultural tractors. Measurement of the driving axles power
GOST 3134-78: White spirit
GOST 31378-2009: Oil. General specifications.
GOST 3164-78: Medical petrolatum. Specifications
GOST 32057-2013: Cutback bituminous products. Determination of distillation characteristics
GOST 32511-2013: Diesel fuel EURO. Specifications
GOST 32513-2013: Automotive fuels. Unleaded petrol. Specifications
GOST 32513-2023: Motor gasoline. Technical conditions
GOST 32595-2013: Aviation turbine fuel Jet A-1. Specifications
GOST 4095-75: Isooctane for industrial use. Specifications
GOST 6794-2017: Oil AMG-10. Technical conditions
GOST 6794-75: Oil АМГ-10. Specifications
GOST 6994-74: White petroleum products. Method for determination of aromatic hydrocarbons
GOST 8505-80: Nefras-C 50/170. Specifications
GOST 8852-74: Petroleum products. Method of test for coking by apparatus 'LKN-70'
GOST 8997-89: Petroleum products. Electrometric method for determination of bromine numbers and unsaturated hydrocarbons
GOST EN 13132-2012: Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
GOST ISO 3733-2013: Petroleum products and bituminous materials. Determination of water by distillation
GOST ISO 4263-4-2013: Petroleum and petroleum products. Determination of the ageing behaviour of inhibited oils and fluids. TOST method. Part 4. Industrial gear oils
GOST R 41.49-2003: Uniform provisions concerning the certification of compression ignition and natural gas engines as well as positive-ignition engines fuelled with liquefied petroleum gas and vehicles equipped with compression ignition and natural gas engines and positive-ignition engines fuelled with liquefied petroleum gas, with regard to the emissions of pollutants
GOST R 51105-97: Gasoline for combustion engines. Unleaded gasoline. Specifications
GOST R 51313-99: Motor petrols. General technical requirements
GOST R 51832-2001: Internal combustion direct ignition petrol engines and road vehicles of total mass exceeding 3,5 t completed with those engines. Emission of pollutants. Technical requirements and test methods
GOST R 51858-2002: Crude petroleum. General specifications
GOST R 51866-2002: Automotive fuels. Unleaded petrol. Specifications
GOST R 52050-2006: Aviation turbine fuel Jet A-1. Specifications
GOST R 52201-2004: Fuel motor ethanol for automotive spark-ignition engines. Benzanols. General technical requirements
GOST R 52368-2005: Diesel fuel EVRO. Specifications
GOST R 52755-2007: Liquid composite fuel. Specifications
GOST R 53134-2008: Automotive spark-ignition engine fuels. Unleaded gasoline. Specifications
GOST R 54389-2011: Stable gas condensate. Specifications
GOST R 55475-2013: Dewaxed winter and arctic diesel fuel. Specifications
GOST R 55493-2013: Aviation gasoline Avgas 100LL. Specifications
GOST R 56147-2014: Jet fuels. Procedure for qualification tests and drawing up of a technical statement
GOST R 57836-2017: Perchloroethylene for drycleaning. General technical requirements
GOST R 70708-2023: Pyrolysis liquid products. Pyrolysis light tar. Technical conditions
GOST R ISO 8178-5-2009: Reciprocating internal combustion engines. Exhaust emission measurement - Part 5. Test fuels
Manual: Manual for impulse and low consumption fire extinguishing systems
MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products
MI 2837-2003: Oil hand-over and acceptance points metrological and technical support
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil
OST 153-39.2-048-2003: Oil. Crude oil. Routine research of reservoir fluids and separated oil. Scope of research and presentation of results.
R 50.2.040-2004: Metrological assurance of oil accounting when transferring via main pipeline system. Basic provisions
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.