Construction (Max) » Standards » Other state standards used in construction » 01 General. Terminology. Standardization. Documentation »

PromExpert » SECTION I. TECHNICAL REGULATION » II Standardization » 1 Basic provisions of standardization system »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.120 Standardization. General rules »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.120 Standardization. General rules »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T50 State system of standardization and normative and technical documentation »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » State Standardization System (SSS) »

GOST 1.0-2015: Interstate system for standardization. Basic principles

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication

GOST 1.5-85: State system of standardization. Lay-out formulation, presentation and contents of standards

SNiP 10-01-94: System of normative documents in construction. Basic provisions.

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

GOST 1.3-2002: Interstate system for standardization. Adoption rules and methods for international and regional standards as interstate standards

GOST 1.3-2008: Interstate System for Standardization. Adoption rules and methods for international and regional standards as interstate standards

GOST 1.3-2014: Interstate system for standardization. Standards interstate. Rules of development on the basis of the international and regional standards

GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication

GOST 1.5-93: Interstate standardization procedures general requirements for lay-out, formulation, presentation and contents of standards

GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications

GOST 103-2006: Hot-rolled steel strips. Dimensions

GOST 10393-2009: Compressors and compressor units for the railway rolling stock. General specifications

GOST 10444.11-2013: Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of mesophilic lactic acid bacteria

GOST 10531-2013: Canned fried fish in marinade. Specifications

GOST 10580-2006: Technological foundry equipment. General specifications

GOST 10632-2007: Wood particle boards. Specifications

GOST 10637-2010: Wood particle boards. Method for determination of resistivity to nail and wood screw withdrawal

GOST 10791-2004: All-rolled wheels. Specifications

GOST 10791-2011: All-rolled wheels. Specifications

GOST 10821-2007: Wire made of platinum and platinum-rhodium alloys for thermoelectric temperature transducers. Specifications

GOST 10832-2009: Perlite expanded sand and crushed stone. Specifications

GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications

GOST 11018-2011: Traction railway stock wheelsets of 1520 mm gauge railways. General specifications

GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications

GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications

GOST 11130-2013: Peat and products of its processing. Methods for determination of smalls content and impurities

GOST 11214-2003: Windows of wood with glass. Specifications

GOST 11306-2013: Peat and products of its processing. Methods for determination of ash content

GOST 11532-2014: Nuts for rail joints. Specifications

GOST 11586-2005: Refractories for bottom pouring of steel. Specifications

GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications

GOST 12.0.230-2007: Occupational safety standards system. Occupational safety and health management systems. General requirements

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.2.011-2012: Occupational safety standards system. Building, road and earth-moving machinery. General safety requirements

GOST 12.2.013.3-2002: Electric hand-held tools. Particular safety requirements and methods of testing the grinding, disk-grinding and polishing machines with rotational movement of operating tools

GOST 12.2.013.4-2002: Electric hand-held tools. Particular safety requirements and methods of testing the flat-grinding and band-grinding machines

GOST 12.2.017.4-2003: Sheet-bending presses. Safety requirements

GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements

GOST 12.2.113-2006: Crank presses. Safety requirements

GOST 12.2.116-2004: Three- and four-roller plate-bending machines. Safety requirements

GOST 12.2.118-2006: Shears. Safety requirements

GOST 12.2.120-2005: Occupational safety standards system. Cabs and operator’s workplaces of tractors and powered agricultural machines. General safety requirements

GOST 12.2.121-2013: Occupational safety standards system. Industrial tractors. General safety requirements

GOST 12.2.140-2004: Small tractors. General safety requirements

GOST 12.2.228-2004: Occupational safety standards system. Tools and service work-over rigs for work-over of oil wells. Safety requirements

GOST 12.2.232-2012: Occupational safety standards system. Surface drilling equipment. Safety requirements

GOST 12.3.027-2004: Foundry work. Safety requirements

GOST 12.4.235-2012: Occupational safety standards system. Respiratory protective devices. Gas filters and combined filters. General technical requirements. Test methods. Marking

GOST 12.4.241-2013: Occupational safety standards system. Special clothing for protection from mechanical action. Method for determination of resistance to puncture

GOST 12248-2010: Soils. Laboratory methods for determining the strength and strain characteristics

GOST 12301-2006: Cartons of paperboard, paper and composite materials. General specifications

GOST 123-2008: Cobalt. Specifications

GOST 12549-2003: Passenger cars of 1520 mm gauge main-line railways. Painting. Specifications

GOST 12571-2013: Sugar. Method for determination of sucrose

GOST 12595-2003: Metal-cutting machine tools. Flanged spindle noses of А type and flanges of fixtures. Basic and coupling dimensions

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 1293.0-2006: Lead-antimony alloys. General requirements for methods of chemical analysis

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 13098-2006: Rhodium. Marks

GOST 13099-2006: Iridium. Marks

GOST 131-2013: Crude ethyl alcohol from edible raw material. Specifications

GOST 13462-2010: Palladium and its base alloys. Marks

GOST 13498-2010: Platinum and its base alloys. Marks

GOST 13673-2013: Milling peat. Method for determination of bulk density

GOST 13674-2013: Peat and products of its processing. Acceptance rules

GOST 13903-2005: Glass containers. Methods of testing the thermal resistivity

GOST 13905-2005: Glass containers. Method of testing the water resistance of inner surface

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)

GOST 1452-2003: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 147-2013: Solid mineral fuel. Determination of gross calorific value and calculation of net calorific value

GOST 1535-2006: Copper rods. Specifications

GOST 15612-2013: Products from wood and wood materials. Methods for determination of roughness parameters

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 1639-2009: Non-ferrous metals and alloys scrap and waste. General specifications

GOST 16445-2012: Serum haemolytic for the complement fixation test. Specification

GOST 16446-2012: Dry complement for the complement fixation test. Specification

GOST 16519-2006: Vibration. Testing of hand-held or hand-guided machinery in order to determine the hand-transmitted vibration value. General requirements

GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises

GOST 17032-2010: Horizontal steel tanks for petroleum products. Specifications

GOST 17187-2010: Noise meters Part 1 Technical requirements

GOST 17260-2009: Ferroalloys, metal chromium and metal manganese. General requirements for sampling and preparation of samples

GOST 17527-2003: Package. Terms and definitions

GOST 17624-2012: Concrete. Ultrasonic method of strength determination

GOST 17824-2005: Polyamides, polyamide fibres, fabrics. Methods for determination of extractable materials content

GOST 18124-2012: Chrysotile cement sheets are flat. Technical conditions

GOST 18294-2004: Drinking water. Method for determination of beryllium content

GOST 19351-2006: Wire made of iridium and rhodium. Specifications

GOST 19496-2013: Meat and meat products. The method of histological investigation

GOST 19804-2012: Reinforced prefabricated concrete piles. Specifications

GOST 19912-2012: Soils. Field test methods: cone penetration test and dynamic probing

GOST 2.001-2013: Unified system for design documentation. General principles

GOST 2.001-93: Unifited system for design documentation. General principles

GOST 2.051-2006: Unified system for design documentation. Digital documents. General principles

GOST 2.052-2006: Unified system for design documentation. Electronic model of product. General

GOST 2.053-2006: Unified system for design documentation. Product electronic structure. General

GOST 2.053-2013: Unified system for design documentation. Product electronic structure. General principles

GOST 2.104-2006: Unified system for design documentation. Basic inscriptions.

GOST 2.116-84: Product technical level and quality map

GOST 2.125-2008: Unified system for design documentation. Rules for making sketch design documents. General principles

GOST 2.305-2008: Unified system for design documentation. Images - appearance, sections, profiles

GOST 2.307-2011: Unified system for design documentation. Drawing of dimensions and limit deviations

GOST 2.308-2011: Unified system of design documentation. Representation of limits of forms and surface lay-out on drawings

GOST 2.316-2008: Unified system for design documentation. Rules for placing of inscriptions, technical data and tables of graphical documents. General principles

GOST 2.418-2008: Unified system for design documentation. Rules for making design documentation for packaging

GOST 2.431-2008: Unified system for design documentation. Rules for making the graphical documents of glass-ware products. Basic requirements

GOST 2.501-2013: Unified system for design documentation. Registration and storage rules

GOST 2.503-2013: Unified system of design documentation. Rules of making modifications

GOST 2.511-2011: Unified system for design documentation. Rules for electronic documentation. General principles

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.601-2013: Unified system for design documentation. Exploitative documents

GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents

GOST 2.611-2011: Unified system for design documentation. Electronic parts catalogue. General principles

GOST 2.612-2011: Unified system of design documentation. Electronic logbook. General principles

GOST 2.701-2008: Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.

GOST 2.702-2011: Unified system for design documentation. Rules for presentation of electric schemes.

GOST 20056-2013: Preserves of oceanic fish in special brine. Specifications

GOST 20076-2007: Vibration. Balancing machines. Description and evaluation methods

GOST 20276-2012: Soils. Field methods for determining the strength and strain characteristics

GOST 20522-2012: Soils. Methods of statistical treatment of test results

GOST 2060-2006: Brass rods. Specifications

GOST 21.001-2013: System of design documents for construction. General principles

GOST 21.002-2014: System of design documents for construction. Compliance assessment of design and working documentation

GOST 21.114-2013: System of design documents for construction. Rules for execution of sketch drawings of general views of non-standard products

GOST 21.201-2011: System of design documents for construction. Symbol graphics elements of buildings, works and structures

GOST 21.208-2013: System of design documents for construction. Industrial process automation. Instrumentation symbols for use in diagrams

GOST 21.301-2014: System of design documents for construction. General requirements for presentation of report documents on engineering investigation

GOST 21.302-2013: System of design documents for construction. Symbol graphics for engineering-geological investigation documents

GOST 21.408-2013: System of design documents for construction. Rules of industrial process automation working documentation execution

GOST 21.501-2011: System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions

GOST 21.502-2007: System of design documents for construction. Execution rules of design and working documents for metal structures

GOST 21.601-2011: System of design documents for construction. Rules for execution of working documents of internal water and sewerage systems

GOST 21.607-2014: System of design documents for construction. Rules for execution of working documents for external electric lighting

GOST 21.608-2014: System of building design documents. Rules for execution of working documents of interior electric lighting

GOST 21.613-2014: System of design documents for construction. Rules for execution of the working documentation of power electrical equipment

GOST 21.701-2013: System of building design documents. Rules of executing of working documentation for motor-ways

GOST 21.704-2011: System of design documents for construction. Rules for execution of working documentation of outside networks of water supply and sewerage

GOST 21.709-2011: System of design documents for construction. Rules of executing of working documentation for linear structures of irrigation systems

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21436-2004: Refractory and high-refractory articles for the lining of rotary furnaces. Specifications

GOST 21445-84: Abrasive materials and tools. Terms and definitions

GOST 21519-2003: Windows of aluminium. Specifications

GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation

GOST 21880-2011: Thermoinsulating mineral wool broached mats. Specifications

GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications

GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations

GOST 22696-2013: Rolling bearings. Cylindrical rollers. Specifications

GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.

GOST 23.001-2004: Products wear resistance assurance. General principles

GOST 23061-2012: Soils. Methods for radioisotope measurement of density and humidity

GOST 23132-2005: Refractories. Letter symbols of quantities used in tests

GOST 23161-2012: Soils. Method of laboratory determination of subsiding characteristics

GOST 23234-2009: Wood particle boards. Method for determination of resistivity to separation of surface layer in direction normal to a plane

GOST 23499-2009: Sound-insulating and sound-absorbing building materials and products. General specifications

GOST 23732-2011: Water for concretes and cement mortars Technical specifications.

GOST 24045-2010: Steel sheet cold-formed sections with trapezoidal corrugations for building. Specifications

GOST 24061-2012: Medicine remedies biological lyophilized for veterinary use. Method for determination mass moisture

GOST 24211-2003: Additives for concretes and mortars. General specifications

GOST 24211-2008: Admixtures for concretes and mortars. General specifications

GOST 24327-2006: Cord fabric. Packing, marking, transportation and storage

GOST 24379.0-2012: Foundation bolts. General specifications

GOST 24379.1-2012: Foundation bolts. Structure and dimensions

GOST 24701-2013: Peat. Methods for the determination of density

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 24717-2004: Refractories and refractory raw materials. Marking, packing, transportation and storage

GOST 24754-2013: Mining electrical equipment of normal production. General technical requirements and test methods

GOST 24839-2012: Structural steelwork. Layout of holes in rolled shapes. Dimensions

GOST 24846-2012: Soils. Methods of measuring the strains of structures and building bases

GOST 24980-2005: Glass containers. Methods of testing the parameters

GOST 24997-2004: Gauges for metric thread. Tolerances

GOST 25043-2013: Propylene. Specifications

GOST 25086-2011: Non-ferrous metals and their alloys. General requirements for methods of analysis

GOST 25192-2012: Concretes. Classification and general technical requirements

GOST 25358-2012: Soils. Field method of determining temperature

GOST 25535-2013: Glass and glass products. Heat resistance determination methods

GOST 25557-2006: Machine tools tapers. Basic dimensions

GOST 25749-2005: Metal winding lids. General specifications

GOST 25898-2012: Building materials and products. Methods for determination of water vapour permeability and of steam-tightness

GOST 2590-2006: Round hot-rolled steel bars. Dimensions

GOST 2593-2009: Coupling air brake hoses for railway rolling stock. Specifications

GOST 26265-84: Standardization in the field of service. Basic provisions

GOST 26585-2003: Giant and super giant pneumatic tyres for off-the-road trucks. Specifications

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 26804-2012: Metal road safety barriers. Specifications

GOST 26824-2010: Buildings and structures. Methods for measuring the luminance

GOST 26877-2008: Metal products. Methods of measuring form variations

GOST 26983-2015: Darnitsky bread. Specifications

GOST 27.001-95: System of standards for dependability in techniques. Basic principles

GOST 27217-2012: Soils. Field method for determining of frost-heave specific tangential forces

GOST 27243-2005: Noise of machines. Determination of sound power levels using sound pressure. Comparison method in situ

GOST 27259-2006: Vibration. Laboratory evaluation of operator seat vibration. Earth-moving machinery

GOST 27294-2013: Explosion-proof mine low-voltage automatic switches. Technical requirements. Test methods

GOST 27307-2013: Explosion-proof mine low-voltage complete control devices to 1140 V. Technical requirements and test methods

GOST 27590-2005: House-tube water-watered heat supply systems. General specifications

GOST 27692-2012: Maintenance documentation for aeronautical engineering. Structure, statement, execution and contents of log books

GOST 27693-2012: Maintenance documentation for aeronautical engineering. Structure, statement, execution and contents of registration certificates, labels and air worthiness certificates

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 27812-2005: Glued laminated timber. Test methods for glue lines delaminating strength

GOST 27843-2006: Test code for machine tools. Determination of accuracy and repeatability of positioning numerically controlled axes

GOST 28100-2007: Acoustics. Laboratory measurements for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss

GOST 28246-2006: Paint materials. Terms and definitions

GOST 28300-2010: Cardan shafts of traction drive of diesel locomotives and diesel trains. General specifications

GOST 28307-2013: Tractor-drawn trailers and semi-trailers. Methods of testing

GOST 28622-2012: Soils. Laboratory method for determination of frost-heave degree

GOST 28681.0-90: Standardization in the field of tourist-excursion service. Basis provisions

GOST 28822-90: Automatic systems for loading and unloading see and river vessels. General technical requirements and test methods

GOST 28874-2004: Refractories. Classification

GOST 28984-2011: Modular coordination of construction dimensions. General.

GOST 29185-2014: Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions

GOST 29332-2006: Chemical fibres. Methods for determination of finishing agent mass percentage content

GOST 3.1001-2011: Unified system for technological documentation. General principles

GOST 3.1102-2011: Unified system of technological documentation. Stages of designing and types of documents. General principles

GOST 3.1103-2011: Unified system of technological documentation. Basic inscriptions. General principles

GOST 3.1105-2011: Unified system of technological documentation. Form and rules of making general-purpose documents

GOST 30028.4-2006: Wood-protective means. Express-method of testing the protective ability to wood-colouring and moulding fungi

GOST 30324.2.9-2012: Medical electrical equipment. Part 2-9. Particular requirements for the safety of patient contact dosimeters used in radiotherapy with electrically connected radiation detectors

GOST 30333-2007: Chemical production safety passport. General requirements

GOST 30340-2012: Corrugated chrysotile cement sheets. Specifications

GOST 30390-2013: Public catering services. Production of the public catering, realized to the population. General specifications

GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency

GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency

GOST 30494-2011: Residential and public buildings. Microclimate parameters for indoor enclosures

GOST 30495-2006: Wood-protective means. General specifications

GOST 30515-2013: Cements. General specifications

GOST 30629-2011: Materials and products facing of rocks. Test methods

GOST 30672-2012: Soils. Field testing. General

GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.

GOST 30777-2012: Turned, reclined, turned-reclined and sliding devices for windows and balcony doors. Specifications

GOST 30801.5-2012: Miniature fuses. Guide lines for quality assessment of miniature fuse-links

GOST 30804.4.11-2013: Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods

GOST 30805.16.1.2-2013: Electromagnetic compatibility of technical equipment. Specification for industrial radio disturbance and immunity measuring apparatus and methods. Part 1-2. Industial radio disturbance and immunity measuring apparatus. Conducted radio disturbance measuring and immunity test apparatus

GOST 30848-2003: Diagnostics of machines on using performance parameters. General guidelines

GOST 30852.10-2002: Electrical apparatus for explosive gas atmospheres. Part 11. Intrinsic safety i

GOST 30852.11-2002: Explosionproof electrical apparatus. Part 12. Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents

GOST 30852.1-2002: Explosionproof electrical equipment. Part 1. Flameproof enclusure type explosion protection

GOST 30852.14-2002: Electrical apparatus for explosive gas atmospheres. Part 15. Type of protection n

GOST 30852.18-2002: Electrical apparatus for explosive gas atmospheres. Part 19. Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives)

GOST 30852.19-2002: Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapours, relating to the use of electrical apparatus

GOST 30852.2-2002: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus. First supplement. Appendix D. Method of test for ascertainment of maximum experimental safe gap

GOST 30852.5-2002: Explosionprotected electrical apparatus. Part 4. Method of test for ignition temperature

GOST 30852.9-2002: Electrical apparatus for explosive gas atmospheres. Part 10. Classification of hazardous areas

GOST 30858-2003: Products wear resistance assurance. Thribotechnical requirements and indices. Principles of provision. General

GOST 30869-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics

GOST 30873.10-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 10. Nibblers and shears

GOST 30873.11-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 11. Fastener driving tools

GOST 30873.12-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 12. Saws and files with reciprocating action and saws with oscillating or rotating action

GOST 30873.13-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 13. Die grinders

GOST 30873.14-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 14. Stone-working tools and needle scalers

GOST 30873.2-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 2. Chipping hammers and riveting hammers

GOST 30873.3-2006: Hand-held portable power tools. Measurement of vibrations at the handle. Part 3. Rock drills and rotary hammers

GOST 30873.4-2006: Hand-held portable power tools. Measurement of vibrations at the handle. Part 4. Grinders

GOST 30873.5-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 5. Рavement breakers and hammers for construction work

GOST 30873.6-2006: Hand-held portable power tools. Measurement of vibrations at the handle. Part 6. Impact drills

GOST 30873.7-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 7. Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action

GOST 30873.8-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 8. Polishers and rotary, orbital and random orbital sanders

GOST 30873.9-2006: Hand-held portable power tools. Measurement of vibrations at the handlе. Part 9. Rammers

GOST 30878-2003: Textiles. Floor coverings. Method for determination of electric resistance

GOST 31040-2002: Refractory products. Determination of modulus of rupture at elevated temperatures

GOST 31108-2003: General structural Portland clinker cements. Specifications

GOST 31167-2009: Buildings and structures. Methods for determination of air permeability of building envelopes in field conditions

GOST 31169-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ

GOST 31170-2004: Vibration and noise of machines. Vibration, noise and force characteristics of marine machines and marine equipment subjected to declaration and verification by testing at supplier-factory's stands

GOST 31171-2003: Noise of machines. Guidelines for the selection of method for the determination of emission sound pressure levels at a work station and at other specified positions

GOST 31172-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane

GOST 31173-2003: Steel doors. Specifications

GOST 31174-2003: Gates of metall. General specifications

GOST 31177-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics

GOST 31178-2003: Jet-abrasive machine tools. Types and basic dimensions

GOST 31186-2002: Vibration. Susceptibility and sensitivity of machines to unbalance

GOST 31187-2003: Main-line diesel locomotives. General technical requirements

GOST 31187-2011: Main-line diesel locomotives. General technical requirements.

GOST 31189-2003: Dry building mixes. Classification

GOST 31191.1-2004: Vibration and shock. Measurement and evaluation of human exposure to whole-body vibration. Part 1. General requirеments

GOST 31191.2-2004: Vibration and shock. Measurument and evaluation of human exposure to whole-body vibration. Part 2. Vibration in buildings

GOST 31191.4-2006: Vibration and shock. Measurement and evaluation of human exposure to whole-body vibration. Part 4. Guidelines for evaluation of the effects of vibration on passengers and crew comfort in rail vehicles

GOST 31191.5-2007: Vibration and shock. Measurement and evaluation of human exposure to whole-body vibration. Part 5. Vibration containing multiple shocks

GOST 31192.1-2004: Vibration. Measurement and evaluation of human exposure to hand-transmitted vibration. Part 1. General requirеments

GOST 31192.2-2005: Vibration. Measurement and evaluation of human exposure to hand-transmitted vibration. Part 2. Requirements for measurement at the workplace

GOST 31193-2004: Vibration. Testing of mobile machinery in order to determine the vibration emission value. General requirements

GOST 31194.1-2004: Vibration and shock. Guidance on safety aspects of tests with people. General requirements

GOST 31222.2-2012: Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 2. Determination of the conversion factor

GOST 31223-2012: Cable reels for household and similar purposes. General requirements and test methods

GOST 31244-2004: Non-destructive testing. Evaluation of material physical and mechanical properties for technical system elements by acoustic method. General requirements

GOST 31245-2004: Automatic identification. Bar coding. Bar code master test specifications

GOST 31246-2004: Industrial cleanliness. Hydromechanical method of cleaning from contaminations the pipelines in gas and fluid systems of machines and mechanisms

GOST 31247-2004: Industrial cleanliness. Determination of fluid sample contamination using automatic particle counter

GOST 31248-2004: Vibration. Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles

GOST 31249-2004: Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance

GOST 31251-2003: Building structures. Fire hazard determination methods. Facades of buildings

GOST 31251-2008: Facades of buildings. Fire hazard test method

GOST 31252-2004: Noise of machines. Guidelines for the selection of method for the determination of sound power levels

GOST 31254-2004: Вasic norms of interchangeability. Geometrical features. General terms and definitions

GOST 31270-2004: Сivil aircrafts. Service bulletins processing and works fulfilment in accordance with them

GOST 31273-2003: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for anechoic and semi-anechoic rooms

GOST 31274-2004: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for reverberation rooms

GOST 31278-2004: Military and economical interstate cooperation of the community of independent states. Terms and definitions

GOST 31281-2004: Locking-sealing devices for transport and general and special purposes containers. General technical requirements

GOST 31282-2004: Locking devices. Classification

GOST 31283-2004: Indicators seals. General technical requirements

GOST 31285-2005: Chrysotile asbestos. Method for determination of fractional composition and foreign matters content on the testing machine

GOST 31287-2005: Noise. Guidelines for noise control in workrooms by means of acoustical screens

GOST 31290-2005: Refined platinum. Specifications

GOST 31291-2005: Refined palladium. Specifications

GOST 31292-2006: Glass containers. Methods of testing the residual stresses after annealing

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31295.1-2005: Noise. Attenuation of sound during propagation outdoors. Part 1. Calculation of the absorption of sound by the atmosphere

GOST 31295.2-2005: Noise. Attenuation of sound during propagation outdoors. Part 2. General method of calculation

GOST 31296.1-2005: Noise. Description, measurement and assessment of environmental noise. Part 1. Basic quantities and assessment procedures

GOST 31296.2-2006: Noise. Description, measurement and assessment of environmental noise. Part 2. Determination of sound pressure levels

GOST 31297-2005: Noise. Engineering method of determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment

GOST 31298.1-2005: Noise of machines. Determination of sound insulation performances of enclosures. Part 1. Measurements under laboratory conditions for declaration of noise performans values

GOST 31298.2-2005: Noise of machines. Determination of sound insulation performances of enclosures. Part 2. Measurements in situ for acceptance and verification of declared noise performance values

GOST 31299-2005: Noise of machines. Determination of sound insulation performances of cabins. Laboratory and in situ test

GOST 31300-2005: Noise of machines. Liquid pumps. Noise tests

GOST 31301-2005: Noise. Noise control design procedures for open plants

GOST 31303-2006: Industrial cleanliness. Hydrodynamic method of cleaning from contaminations in gas and fluid systems of machines and mechanisms

GOST 31309-2005: Building heat-insulating mineral fibers materials. General specifications

GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications

GOST 31311-2005: Heating devices. General specifications

GOST 31315-2006: Electronic sealing devices. General technical requirements

GOST 31315-2013: Electronic sealing devices. General technical requirement

GOST 31316-2006: Vibration. Laboratory evaluation operator seat vibration. Agricultural wheeled tractors

GOST 31317.2-2006: Vibration. Laboratory method for evaluating vehicle seat vibration. Part 2. Railway vehicle seats

GOST 31318-2006: Vibration. Laboratory evaluation of operator seat vibration. Industrial trucks

GOST 31319-2006: Vibration. Measurement and evaluation of human exposure to whole-body vibration. Practical guidance for measurement at the workplace

GOST 31320-2006: Vibration. Methods and criteria for the mechanical balancing of flexible rotors

GOST 31321-2006: Vibration. Balancing machines. Enclosures and other protective measures

GOST 31322-2006: Vibration. Requirements for balancing of rotor elements to be jointed with fitment key

GOST 31323-2006: Vibration. Testing of mobile machinery in order to determine the vibration emission value. Agricultural wheeled tractors and field machinery

GOST 31324-2006: Noise. Determination of performances of silencers in situ tests

GOST 31325-2006: Noise. Measurement of noise emitted by construction equipment intended for outdoor use. Method for determining compliance with noise limits

GOST 31326-2006: Noise. Guidelines for noise control by enclosures and cabins

GOST 31327-2006: Noise of machines. Procedure for the comparison of noise-emission data for machinery and equipment

GOST 31328-2006: Noise. Guidelines for noise control by silencers

GOST 31329-2006: Noise. Measurement of airborne sound emitted by vessels on inland waterways and harbours

GOST 31330.1-2006: Noise. Measurement of the influence of road surfaces on traffic noise. Part 1. Statistical method

GOST 31333-2006: Noise of machines. Measurement of noise emitted by passenger cars under conditions representative of urban driving

GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications

GOST 31335-2006: Technological foundry equipment. Equipment for shot shooting, shot blasting and shot shooting-blasting treatment. Safety requirements

GOST 31336-2006: Noise of machines. Engineering methods for measurement of noise of compressors and vacuum pumps

GOST 31340-2007: Labelling of chemicals. General requirements

GOST 31345-2007: Tractor seeders. Test methods

GOST 31346-2007: Instаllation for processing of dung. Test methods

GOST 31348-2007: Hand-held portable power tools. Measurement of vibrations at the handle. Forestry machinery with gasoline engine

GOST 31349-2007: Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations

GOST 31350-2007: Vibration. Industrial fans. Requirements for vibration levels and balance quality

GOST 31351-2007: Vibration. Industrial fans. Measurement of vibration

GOST 31352-2007: Noise of machines. Determination of sound power levels radiated into a duct for fans and other air-moving devices using a in-duct method

GOST 31353.1-2007: Noise of machines. Industrial fans. Determination of sound power levels under laboratory conditions. Part 1. General characteristic of methods

GOST 31353.2-2007: Noise of machines. Industrial fans. Determination of sound power levels under laboratory conditions. Part 2. Reverberant method

GOST 31353.3-2007: Noise of machines. Industrial fans. Determination of sound power levels under laboratory conditions. Part 3. Enveloping surface method

GOST 31353.4-2007: Noise of machines. Industrial fans. Determination of sound power levels under laboratory conditions. Part 4. Sound intensity method

GOST 31356-2007: Dry building cement binder mixes. Test methods

GOST 31357-2007: Dry bulding cement binder mixes. General specifications

GOST 31358-2007: Dry building flooring cement binder mixes. Specifications

GOST 31359-2007: Cellular autoclave curing concretes. Specifications

GOST 31360-2007: Wall unreinforced products of cellular autoclave curing concrete. Specifications

GOST 31362-2007: Compression-type gaskets for window and blocks. Metnod of resistanse to exploitation effects determination

GOST 31364-2007: Soft coating low emissivity glass. Specifications

GOST 31365-2008: Paint coatings electrolocomotives and diesellocomotives of 1520 mm gauge mainline railways. Specifications

GOST 31366-2008: Brass rods for free machining purposes. Specifications

GOST 31367-2008: Vibration. Testing of mobile machinery in order to determine the vibration emission value. Aircraft ground support equipment

GOST 31368.3-2008: Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 3. Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion

GOST 31368.4-2008: Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 4. Dynamic stiffness of elements other than resilient supports for translatory motion

GOST 31369-2008: Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition

GOST 31370-2008: Natural gas. Sampling guidelines

GOST 31371.1-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 1. Guidelines for tailored analysis

GOST 31371.2-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 2. Measuring-system characteristics and statistics for processing of data

GOST 31371.3-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 3. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns

GOST 31371.4-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 4. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns

GOST 31371.5-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 5. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns

GOST 31371.6-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 6. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns

GOST 31371.7-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 7. Measurement procedure of the mole fraction of components

GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests

GOST 31374-2009: Connection brake pipe with electrocontact 369A. Specifications

GOST 31376-2008: Dry building mixtures based on gypsum binder. Test methods

GOST 31377-2008: Dry building levelling plaster mixtures based on gupsum binder. Specifications

GOST 31378-2009: Oil. General specifications.

GOST 31379-2009: Global navigation satellite systems. Personal receiver. Technical requirements

GOST 31382-2009: Copper. Methods of analysis

GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST 31384-2008: Structural concrete protection against corrosion. General requirements

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31386-2008: Dry building glued gypsum binder mixes. Specifications

GOST 31387-2008: Dry building рutty gypsum binder mixes. Specifications

GOST 31402-2009: Brake cylinders for railway rolling stock. General specifications

GOST 31402-2013: Brake cylinders for railway rolling stock. General specifications

GOST 31411-2009: Ammonium perrenat. Specifications

GOST 31416-2009: Chrysotile cement pipes and couplings. Specifications

GOST 31417-2010: Vibration. Assessment of exposure to hand-transmitted vibration using information on vibration emitted by machines

GOST 31418-2010: Testing methods for the resistance of machines, devices and other engineering products to external acting mechanical factors. Impact testing with the modelling of impact spectre.

GOST 31419-2010: Testing methods for the resistance of machines, devices and other engineering products to external acting mechanical factors. Tests for the vibration with the imitation of some types of actions.

GOST 31420-2010: Machine noise. A.C. power generating set s with the actuator from the combustion engine. Measuring of the noise by the method of female face.

GOST 31421-2010: Vibration. Determination of the parameters of vibration characteristic of self-propelled vehicles. Ground transport.

GOST 31424-2010: Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications

GOST 31425.1-2010: Machine noise Procedure of tests for the noise of textile machines. Part 1 General requirements

GOST 31426-2010: Friable rocks for sand, gravel and сrushed gravel for construction works. Technical requirements and test methods

GOST 31427-2010: Residential and public buildings. Composition of еnergy еfficiency indicators

GOST 31428-2011: Shunting diesel locomotives. General technical requirements

GOST 31430-2011: Thermal insulating products in building applications. Method for determination of organic content

GOST 31436-2011: Hard rocks for the production of broken natural stone used in construction works. Technical requirements and test methods.

GOST 31439-2011: Equipment and components intended for use in potentially explosive atmospheres in underground mines

GOST 31440.1-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 1. Group II engines for use in flammable gas and vapour atmospheres

GOST 31440.2-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 2. Group I engines for use in underground workings susceptible to fired amp and/or combustible dust

GOST 31440.3-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 3. Group III engines for use in flammable dust atmospheres

GOST 31441.2-2011: Non-electrical equipment for use in potentially explosive atmospheres. Part 2. Protection by flow restricting enclosure «fr»

GOST 31441.5-2011: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety «c»

GOST 31441.6-2011: Non-electrical equipment for use in potentially explosive atmospheres. Part 6. Protection by control of ignition source «b»

GOST 31441.8-2011: Non-electrical equipment for use in potentially explosive atmospheres. Part 8. Protection by liquid immersion «k»

GOST 31443-2012: Steel pipes for crafts pipelines. Specifications

GOST 31444-2012: Pipes from low-alloy steel for submsrine sea pipelines. General specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31470-2012: Poultry meat, edible offal and semi-processed products. Methods for organoleptic and physico-chemical examinations

GOST 31471-2011: Panic and emergency exit devices. Specifications

GOST 31503-2012: Milk and milk products. Determination of stabilazers content by gas chromatography method

GOST 31504-2012: Milk and milk products. Determination of preservatives and synthetic colors content by high performance liquid chromatography method

GOST 31536-2012: Wheelsets for the traction railway stock. Method of measuring electrical resistance

GOST 31539-2012: Live-cycle of railway rolling stock. Terms and definitions

GOST 31541-2012: Hammers. Safety requirements

GOST 31542-2012: Automatic and semi-automatic metal forming machines. Safety requirements

GOST 31550-2012: Pile driving hammers. Specifications

GOST 31552-2012: Plate compactor. General specifications

GOST 31554-2012: Front end loaders with telescopic boom. General specifications

GOST 31555-2012: Building front-end single-bucket loaders. Specifications

GOST 31558-2012: Mine belt conveyers. General specifications

GOST 31559-2012: Anchor supports. General pecifications

GOST 31560-2012: Metal frame yield supports. Arch support. General specifications

GOST 31562-2012: Рneumatic rock drills. General technical requirements

GOST 31565-2012: Cable products. Requirements of fire safety.

GOST 31593-2012: Machines and equipment for wood industrial low landings. Safety requirements. Control methods

GOST 31596-2012: Gas tightness of equipment and apparatus for gas welding, cutting and allied processes. Permissible rates of external gas leakage and measuring procedures

GOST 31601.2.2-2012: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-2. Applicability of the general rules to RCCB's functionally dependent on line voltage

GOST 31605-2012: Asynchronous electrical mashines of power from 1 to 400 kW inclusive. Motors. Efficiency and power factors

GOST 31606-2012: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical requirements

GOST 31610.1.1-2012: Electrical apparatus for explosive gas atmospheres. Part 1-1. Flameproof enclosures «D». Method of test for ascertainment of maximum experimental safe gap

GOST 31610.28-2012: Explosive atmospheres. Part 28. Protection of equipment and transmission systems using optical radiation

GOST 31610.5-2012: Electrical apparatus for explosive gas atmospheres. Part 5. Powder filling «q»

GOST 31610.6-2012: Electrical apparatus for explosive gas atmospheres. Part 6. Oil-immersion «o»

GOST 31611.2-2012: Caplights for use in mines susceptible to firedamp. Part 2. Performance and other safety-related matters

GOST 31612-2012: Leakage electric current mine-type protective devices for voltage nets to 1200 V. General technical requirements

GOST 31613-2012: Static electricity spark safety. General technical requirements and test methods

GOST 31614-2012: Explosion-proof mine electromagnetic starters up to 1140 V. Technical requirements and test methods

GOST 31616-2012: Annuloplasty rings. Technical requirements and test methods

GOST 31633-2012: Milk and milk products. Determination of mass portion of milk fat using photocolorimetry method

GOST 31636.2-2012: Safety in electroheat installations. Part 2. Particular requirements for resistance heating equipment

GOST 31671-2012: Foodstuffs. Determination of trace elements. Preparation of samples by pressure digestion

GOST 31672-2012: Foodstuffs. Method of electron paramagnetic resonance for detection of radiation-treated food containing cellulose

GOST 31704-2011: Sound absorbing materials. Sound absorption measurement method in reverberation room

GOST 31705-2011: Sound absorbing materials used in buildings. Assessment of sound absorption

GOST 31706-2011: Acoustical materials used floating floors in dwellings. Method for determination of dynamic stiffness

GOST 31707-2012: Foodstuffs. Determination of trace elements. Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion

GOST 31708-2012: Microbiology of food and stuffs. Method for the detection and enumeration of presumptive Escherichia coli. Most probable number technique

GOST 31719-2012: Foodstuffs and feed. Rapid method of identification of raw composition (molecular)

GOST 31731-2012: Sparkling wine. Specification

GOST 31737-2012: Bitumen. Method of flow test using a floater

GOST 31738-2012: Bituminous paving mixtures. Determination of water and volatiles content

GOST 31739-2012: Bituminous paving mixtures. Determination of theoretical maximum specific gravity

GOST 31745-2012: Food products. Determination of PAHs content by HPLC method

GOST 31746-2012: Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus

GOST 31747-2012: Food products. Methods for detection and quantity determination of coliformes

GOST 31748-2012: Foodstuffs. Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products. High-performance liquid chromatographic method

GOST 31756-2012: Animal and vegetable fats and oils. Determination of anisidine value

GOST 31803-2012: Sulfuric acid. Methods for analysis

GOST 31808-2012: Fresh pasta products. General specifications

GOST 31814-2012: Conformity assessment. General sampling rules for products testing during attestation assessment

GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General

GOST 31824-2012: Fibrous mist eliminators. Types and main parameters. Safety requirements. Methods of testing

GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing

GOST 31827-2012: Liquid centrifugal separators. Safety requirements. Test methods

GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing

GOST 31831-2012: Centrifugal dust collectors. Safety requirement and methods of testing

GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods

GOST 31837-2012: Abcorptive gas purifiers. Safety requirements and test methods

GOST 31838-2012: Columns. Technical requirements

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 31845-2012: Gas fuel locomotives. Explosion safety requirements

GOST 31857-2012: Drinking water. Methods for determination of surfactants content

GOST 31858-2012: Drinking water. Method for determination of chlorine-organic pesticides by gas-liquid chromatography

GOST 31859-2012: Water. Method for determination of chemical oxygen demand

GOST 31870-2012: Drinking water. Determination of elements content by atomic spectrometry methods

GOST 31893-2012: Conformity assessment. Standards System in Conformity Assessment

GOST 31897-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of resistance to dynamic loading

GOST 31902-2012: Confectionery. Methods of determination of fat weight fraction

GOST 31904-2012: Food products. Methods of sampling for microbiological analyses

GOST 31912-2011: Thermal insulating products for building equipment and industrial installations. Determination of design thermal conductivity

GOST 31914-2012: High-strength heavy-weight and fine-grane concrete for situ-casting structures. Rules for control and quality assessment

GOST 31916-2012: Mushrooms. Cultivated fresh field mushrooms. Guide to cold storage and refrigerated transport

GOST 31923-2012: Extraction bees wax. Specifications

GOST 31925-2011: Building materials and products of high and medium thermal resistance. Methods of determination of thermal resistance by means of guarded hot plate and heat flow meter

GOST 31933-2012: Vegetable oils. Methods for determination of acid value

GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition

GOST 31938-2012: Fiber-reinforced polymer bar for concrete reinforcement. General specifications

GOST 31940-2012: Drinking water. Methods for determination of sulfate content

GOST 31944-2012: Load-bearing geophysical armoured cables. General specifications

GOST 31948-2012: Discharge lamps (excluding luminescent lamps). Safety requirements

GOST 31950-2012: Water. Method for determination of total mercury by flameless atomic absorption spectrometry

GOST 31952-2012: Water treatment for units. General requirements and methods of efficiency determination

GOST 31955.1-2013: Water quality. Detection and enumeration of Escherichia coli and coliform bacteria. Part 1. Membrane filtration method

GOST 31956-2012: Water. Methods for determination of chromium (VI) and total chromium

GOST 31957-2012: Water. Methods for determination of alkalinity and mass concentration of carbonates and hydrocarbonates

GOST 31958-2012: Water. Methods for determination of total and dissolved organic carbon

GOST 31960-2012: Water. Methods of toxicity determination by growth inhibition of marine unicellular algae Phaeodactylum tricornutum Bohlin and Sceletonema costatum (Greville) Cleve

GOST 31966-2012: Marine, lokomotive and industrial engines. General safety requirements

GOST 31967-2012: Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods

GOST 31977-2012: Dried milk products. Method for determination of bulk density

GOST 31982-2012: Food products, feeds, food raw materials. Method of determination of b-agonists by Gas chromatography. Mass Spectrometry

GOST 31988-2012: Public catering service. Method of calculation of wastes and losses of catering products

GOST 31994-2013: Traffic control devices. Roadside barriers. General technical requirements

GOST 31996-2012: Power cables with plastic insulation for rated voltages of 0,66; 1 and 3 kV. General specifications

GOST 32010-2013: Food products. Method for detection of Shigella species bacteria

GOST 32011-2013: Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Escherichia coli О157

GOST 32012-2012: Milk and milk product. Methods for determination of the spores content of mesophilic anaerobic microorganisms

GOST 32014-2012: Food products, food raw materials. Method of determination of the nitrofuran mytobolites by high performance liquid chromatography - mass spectrometry (HPLC-MS)

GOST 32015-2012: Food products, feeds, food raw materials. Method of determination of anabolic steroids and stylben derivatives by gas chromatography using mass spectrometry

GOST 32021-2012: Hard rock aggregates and fillers for production dre building mixes. Specifications

GOST 32026-2012: Clay raw materials for manufacturing of claydite gravel, rubble and sand. Specifications

GOST 32027-2013: Fruit wine materials fermented and alcoholized after fermentation. Specifications

GOST 32049-2013: Food flavourings. General specifications

GOST 32064-2013: Food products. Methods for detection and quantity determination of family Enterobacteriaceae

GOST 32111.1-2013: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 1. Non-ducted outdoor equipment

GOST 32123-2013: Animal and vegetable fats and oils. Determination of benzo[a]pyrene. Reverse-phase high performance liquid chromatography method

GOST 32133.2-2013: Electromagnetic compatibility of technical equipment. Uninterruptible power systems. Requirements and test methods

GOST 32139-2013: Petroleum and petroleum products. Determination of sulphur content by method of energy dispersive X-ray fluorescence spectrometry

GOST 32144-2013: Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in the public power supply systems

GOST 32145-2013: Electric energy. Electromagnetic compatibility of technical equipment. Еlectric energy quality control in the public power supply systems

GOST 32159-2013: Maize starch. General specifications

GOST 32161-2013: Foodstuffs. Method for cesium Сs-137 content determination

GOST 32163-2013: Foodstuffs. Method for strontium Sr-90 content determination

GOST 32164-2013: Foodstuffs. Sampling methods for stroncium Sr-90 and cesium Cs-137 determination

GOST 32227-2013: Deers for slaughter. Carcasses and semi-carcasses. Specifications

GOST 32256-2013: Sherbet Ice cream and Frozen Desserts with milk and milk products. General specifications

GOST 32257-2013: Milk and milk products. Method for determination of nitrate and nitrite contents

GOST 32258-2013: Milk and milk products. Method for determination of benz(a)pyrene mass fraction

GOST 32267-2013: Cutting oils. Determination of active sulphur

GOST 32271-2013: Petroleum asphalts. Determination of viscosity at elevated temperatures using a rotational viscometer

GOST 32281.1-2013: Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass

GOST 32299-2013: Paint materials. Pull-off test for adhesion

GOST 32300-2013: Paint materials. Method for determination of wet-scrub resistance and cleanability of coatings

GOST 32304-2013: Laminate flooring based on dry process wood fibreboards. Specifications

GOST 32305-2013: Rolling bearings. Thermal speed rating. Calculation and coefficients

GOST 32311-2012: Ceramic paving brick. Specifications

GOST 32315.1-2012: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of peel resistance of joints

GOST 32327-2013: Petroleum products. Determination for acid number by potentiometric titration

GOST 32329-2013: Petroleum products. Determination of corrosiveness to copper strip

GOST 32333-2013: Petroleum products. Determination of acid number by semi-micro color indicator titration

GOST 32353-2013: East Siberia coals for power supply and technological purposes. Specifications

GOST 32359-2013: Oil and gas-oil fields. Rules for reservoir engineering

GOST 32367-2013: Testing of chemicals of environmental hazard. Daphnia magna Reproduction Test

GOST 32371-2013: Testing of chemicals of health hazard. Skin absorption: In vivo method

GOST 32386-2013: Goods of household chemistry. Method for determination of active chlorine

GOST 32390-2013: Lubricating greases and oils. Method for determination of evaporating loss

GOST 32395-2013: Distribution boards for dwelling-houses. General specifications

GOST 32396-2013: Input-distributional boards for dwellings and public buildings. General specifications

GOST 32397-2013: Distribution boards for industrial and social buildings. General specifications

GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications

GOST 32405-2013: Solid hardmetal end mills. Specifications

GOST 32406-2013: Diamond and cubic boron nitride tools. Safety requirements

GOST 32421-2013: Classification of chemicals which hazard is caused by physical and chemical properties. Test methods of explosives

GOST 32432-2013: Testing of chemicals of environmental hazard. Aerobic and anaerobic transformation in aquatic sediment systems

GOST 32448-2013: Global navigation satellite system. Civil navigation receiver equipment for launchers, space tugs and space vehicles. Technical requirements

GOST 32490-2013: Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading

GOST 32508-2013: Diesel fuels. Determination of cetane number

GOST 32510-2013: Marine fuels. Specifications

GOST 32513-2013: Automotive fuels. Unleaded petrol. Specifications

GOST 32518.1-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica gravimetric method

GOST 32518.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method

GOST 32522-2013: Polypropylene woven sacks. General specifications

GOST 32527-2013: Mineral nitrogen-containing substances. Determination in air and water

GOST 32529-2013: Glass and glass products. Acceptance rules

GOST 32533-2013: Hexamethylene diamine. Determination in air

GOST 32534-2013: Diphenylol propane. Determination in air

GOST 32539-2013: Glass and glass products. Terms and definitions

GOST 32555-2013: Urea for industrial use. Photometric method for determination of biuret content

GOST 32558-2013: Coal. Determination of bulk density

GOST 32561-2013: Hard coal. Determination of plastic properties. Gieseler plastometer method

GOST 32562.1-2013: Coated glass. Classification

GOST 32562.3-2013: Coated glass. Test methods for class C and D coatings

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32580-2013: p-Cresol. Determination in water

GOST 32581-2013: о-Cresol. Determination in water

GOST 32689.1-2014: Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Part 1. General considerations

GOST 32689.2-2014: Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Part 2. Methods for extraction and cleanup

GOST 32689.3-2014: Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Part 3. Determination and confirmatory tests

GOST 32756-2014: Automobile roads of general use. Requirements for intermediate acceptance work performed

GOST 32797-2014: Food products, food raw materials. Method of determination of the chynolony content by high performance liquid chromatography with mass spectrometry detector

GOST 32798-2014: Food products, food raw materials. Method for determination of the aminoglycosides content by high performance liquid chromatography with mass spectrometry detector

GOST 32834-2014: Food products, food raw materials. Method for determination of the anthelminthic by high performance liquid chromatography - mass spectrometry

GOST 32881-2014: Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry

GOST 32892-2014: Milk and dairy products. Method of pH determination

GOST 32901-2014: Milk and milk products. Methods of microbiological analysis

GOST 32931-2015: Profile steel pipes for metal constructions. Specifications

GOST 32951-2014: Semi-prepared meat and meat-contained product. General specifications

GOST 32992-2014: Quilted blankets and coverlets. General technical conditions

GOST 33073-2014: Electric energy. Electromagnetic compatibility of technical equipment. Control and monitoring of electric power quality in the public power supply systems

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33303-2015: Foodstuffs. Sampling methods for determination of mycotoxins

GOST 33394-2015: Frozen pelmeni. Specifications

GOST 33482-2015: Food products, food raw materials, mixed feeds. Method for determination of anabolic steroids and stilbene derivatives by high performance liquid chromatography-mass spectrometry

GOST 33566-2015: Milk and dairy products. Determination of yeast and mould

GOST 33568-2015: Milk and dairy products. Methods for determination of salt-tolerant bacteria

GOST 33615-2015: Food products, food raw materials. Immunoenzymatic method for determination of furazolidone metabolite

GOST 3478-2012: Rolling bearings. Boundary dimensions

GOST 380-2005: Common quality carbon steel. Grades

GOST 398-2010: Rough tyres for railway rolling stock. Specifications

GOST 4640-2011: Mineral wool. Specifications

GOST 4728-2010: Axle billets for railway rolling stock. Specifications

GOST 4835-2006: Car wheelsets of 1520 mm gauge mainline railways. Specifications

GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications

GOST 492-2006: Nickel, nickel and copper-nickel alloys treated by pressure. Grades

GOST 4960-2009: Electrolytic copper powder. Specifications

GOST 5017-2006: Wrought tin bronzes. Grades

GOST 5088-2005: Hinges for windows and doors. Specifications

GOST 5089-2003: Locks and latches for doors. Specifications

GOST 5089-2011: Locks, latches, mechanisms cylinders. General specifications

GOST 520-2011: Roll bearings. General specifications.

GOST 5221-2008: Tin-zink bronze wire. Specifications

GOST 530-2007: Ceramic bricks and stones. General specifications

GOST 530-2012: Ceramic brick and stone. General specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5541-2002: Cork means of closing. General specifications

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5962-2013: Grude ethyl alcohol from edible raw material. Specifications

GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications

GOST 6012-2011: Nickel. Methods of the chemical and atomic emission spectrographic analysis.

GOST 6134-2007: Rotodynamic pumps. Test methods

GOST 6139-2003: Sand for cement testing. Specifications

GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6651-2009: State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods

GOST 6749-2005: Paper-base for wallpaper. Specifications

GOST 6799-2005: Glass articles for furniture. Specifications

GOST 7.11-2004: System of standards on information, librarianship and publishing. Bibliographic description and references. Rules for the abbreviation of words and word combinations in foreign European languages

GOST 7.1-2003: System of standards on information, librarianship and publishing. Bibliographic record. Bibliographic description. General requirements and rules

GOST 7.55-99: System of standards on information, librarianship and publishing. General principles

GOST 7.62-2008: System of standards on information, librarianship and publishing. Symbols for making-up manuscripts, galleys and proofs correction. General requirements

GOST 7.70-2003: System of standards on information, librarianship and publishing. Standard description for data bases and information computer files. The set of characteristics and their representation

GOST 7.86-2003: System of standards on information, librarianship and publishing. Editions. General requirements for annotation of edition

GOST 7.88-2003: System of standards on information, librarianship and publishing. Rules for the abbreviation of titles and title words of publications

GOST 7.89-2005: System of standards on information, librarianship and publishing. Author's and publisher's textual originals. General requirements

GOST 7.90-2007: System of standards on information, librarianship and publishing. Universal deсimal classification. Structure, rules for use and indexing

GOST 7190-2013: Liqueur-vodka products. General specifications

GOST 7247-2006: Paper and combined materials on the base of paper for automatic packaging of food, manufactured production and nonfood products. General specifications

GOST 7392-2014: Crushed stone of solid rocks for ballast layer of rail ways. Specifications.

GOST 7409-2009: Freight cars. Requirements to paint coatings

GOST 7702.2.7-2013: Poultry meat, edible offal and poultry meat ready-to-cook. Methods for detection of Proteus bacteria

GOST 7746-2015: Current transformers. General specifications

GOST 7850-2013: Caprolactam. Specifications

GOST 7862-62: Automobile stationary scales for general use

GOST 7975-2013: Fresh food pumpkin. Specification

GOST 8.018-2007: State system for ensuring the uniformity of measurements. State verification schedule for means of LTEC measurements of solid substances in temperature range from 90 to 1800 K

GOST 8.046-2010: State system for ensuring the uniformity of measurements. Optical dividing heads. Verification procedure

GOST 8.063-2007: State system for ensuring the uniformity of measurements. State verification schedule for means measuring the metals and alloys hardness on Vickers scales

GOST 8.135-2004: State system for ensuring the uniformity of measurements. Weight amounts of the standard materials for preparation of the buffer solutions - operational pH standards of 2-nd and 3-rd classes. The technical and the metrological characteristics. Methods of them determination

GOST 8.197-2005: State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance in spectral range from 0,04 to 0,25 mom

GOST 8.247-2004: State system for ensuring the uniformity of measurements. Sounding sticks for oil product level measuring in horizontal tanks. Calibration methods

GOST 8.259-2004: State system for ensuring the uniformity of measurements. Electrical induction active and reactive energy meters. Methods of verification

GOST 8.335-2004: State system for ensuring the uniformity of measurements. Hardness standard blocks. Methods of verification

GOST 8.381-2009: State system for ensuring the uniformity of measurements. Standards. Ways for expressing the accuracy

GOST 8.393-2010: State system for ensuring the uniformity of measurements. Optical Quadrants. Verification procedure

GOST 8.461-2009: State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistive temperature transducers. Verification methods

GOST 8.523-2004: State system for ensuring the uniformity of measurements. Gravimetric filling instruments. Verification procedure

GOST 8.540-2006: State system for ensuring the uniformity of measurements. State verification scheme for means of measuring the maximum values of impulse electric and magnetic fields strengths

GOST 8.540-2011: State system for ensuring the uniformity of measurement. State verification schedule of measuring devices of maximal values of impulse densities of electrical and magnetic fields.

GOST 8.547-2009: State system for ensuring the uniformity of measurements. State verification schedule for means measuring humidity of gases

GOST 8.557-2007: State system for ensuring the uniformity of measurements. State verification schedule for means measuring the spectral, integral and reduced regular transmittance and optical density within the wavelength range from 0,2 to 50,0 um, diffused and regular reflections within the wavelength range from 0,2 to 20,0 um

GOST 8.558-2009: State system for ensuring the uniformity of measurement. State verification schedule of measuring devices of temperature.

GOST 8.578-2008: State system for ensuring the uniformity of measurements. State verification scheme for measuring instruments of the content of components in gaseous media

GOST 8.579-2002: State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing

GOST 8.584-2004: State system for ensuring the uniformity of measurements. Alternating current static meters for active energy. Methods of verification

GOST 8.585-2005: State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of signal length and time of propagation in fibre, average power, attenuation and wavelength for system of fibre-optic transmission and of data transmission

GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements

GOST 8.586.2-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements

GOST 8.586.3-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements

GOST 8.586.4-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 4. Venturi tubes. Technical requirements

GOST 8.586.5-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure

GOST 8.588-2006: State system for ensuring the uniformity of measurements. State verification scheme for means of measuring of material optical density

GOST 8.589-2007: State system for ensuring the uniformity of measurements. Conducting registration operations on items of reception-delivery of oil in the petrowire systems

GOST 8.590-2009: State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the angle of rotation of the plane of polarization

GOST 8.591-2009: State system for ensuring the uniformity of measurements. Nanometre range relief measure with trapezoidal profile of elements. Verification method

GOST 8.592-2009: State system for ensuring the uniformity of measurements. Single-crystal silicon nanometre range relief measures. Geometrical shapes, linear size and manufacturing material requirements

GOST 8.593-2009: State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification

GOST 8.594-2009: State system for ensuring the uniformity of measurements. Scanning electron microscopes. Method for verification

GOST 8.596-2010: State system for ensuring the uniformity of measurements. NMR-analysers for definition of oiliness and moisture content of agricultural materials. Verification procedure

GOST 8.600-2011: State system for ensuring the uniformity of measurement. Fuel tanks for liquid oil products. Checking methods.

GOST 8430-2003: Pneumatic tyres for earthmoving, loading and mining machines. Specifications

GOST 849-2008: Primary nickel. Specifications

GOST 8702-2005: Wallpaper, coloured paper, board and their products. Methods for determination of colour fastness to light under artificial lighting (xenon lamp)

GOST 8776-2010: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 8816-2003: Wooden cants for switch assemblies of wide gauge railways. Specifications

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST 9135-2004: Shoes. Method for determination of total and permanent deformation of foot-toe and counter

GOST 9238-2013: Construction and rolling stock clearance diagrams

GOST 9246-2004: Four-wheel bogies of freight cars for 1520 mm gauge mainline railways. Specifications

GOST 9246-2013: Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specifications

GOST 9479-2011: Blocks of rocks for the production of facing, architectural and construction, memorial and other products. Technical conditions

GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility

GOST 9569-2006: Paraffined paper. Specifications

GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications

GOST 9624-2009: Laminated glued wood. Method for determination of shear strength

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST 9980.5-2009: Paint materials. Transportation and storage

GOST CISPR 15-2014: Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

GOST EN 1005-2-2005: Safety of machinery. Human physical performance. Part 2. Manual handling of machinery and component parts of machinery

GOST EN 1107-1-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of linear dimensional change

GOST EN 1109-2011: Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of flexibility at low temperature

GOST EN 12014-2-2014: Foodstuffs. Determination of nitrate and/or nitrite content. Part 2. HPLC/IC method for the determination of nitrate content of vegetables and vegetable products

GOST EN 12085-2011: Thermal insulating products for applications in building. Methods for determination of linear dimensions of test specimens

GOST EN 12088-2011: Thermal insulating products in building applications. Method for determination of long-term moisture absorption by diffusion

GOST EN 12089-2011: Thermal insulating products in building applications. Method for determination of bending behaviour

GOST EN 12090-2011: Thermal insulating products in building applications. Method for determination of shear behaviour

GOST EN 12415-2006: Safety of metal-working machine tools. Numerically controlled turning machines and turning centres

GOST EN 12417-2006: Safety of metal-working machine tools. Machining centres

GOST EN 12430-2011: Thermal insulating products for building applications. Method for determination of behaviour under point load

GOST EN 12431-2011: Thermal insulating products used in building for floating floors. Method for determination of thickness

GOST EN 12478-2006: Safety of machine tools. Large numerically controlled turning machines and large turning centres

GOST EN 12626-2006: Safety of metal-working machine tools. Laser processing machines

GOST EN 12730-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of resistance to static loading

GOST EN 13128-2006: Safety of metal-working machine tools. Milling machines (including boring machines)

GOST EN 13804-2013: Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation

GOST EN 14152-2013: Foodstuffs. Determination of vitamin B2 by HPLC

GOST EN 14176-2015: Foodstuffs. Determination of domoic acid in mussels by HPLC

GOST EN 15957-2012: Fertilizers. Extraction of phosphorus which is soluble in neutral ammonium citrate

GOST EN 1602-2011: Thermal insulating products in building applications. Method for determination of the apparent density

GOST EN 1604-2011: Thermal insulating products in building applications. Method for determination of dimensional stability under specified temperature and humidity conditions

GOST EN 1605-2011: Thermal insulating products in building applications. Method for determination under specified compressive load and temperature conditions

GOST EN 1606-2011: Thermal insulating products in building applications. Method for determination of compressive creep

GOST EN 1607-2011: Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces

GOST EN 1608-2011: Thermal insulating products for building applications. Method for determination of tensile strength parallel to faces

GOST EN 1609-2011: Thermal insulating products for building applications. Methods for determination of short term water absorption by partial immersion

GOST EN 1760-1-2004: Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

GOST EN 1849-2-2011: Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Methods for determination of thickness and mass per unit area

GOST EN 1928-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of watertightness

GOST EN 237-2013: Liquid petroleum products. Determination of low lead concentrations by atomic absorption spectrometry

GOST EN 29053-2011: Acoustical materials. Methods for determination of airflow resistance

GOST EN 397-2012: Occupational safety standards system. Safety helmets. General technical requirements. Test methods

GOST EN 511-2012: Occupational safety standards system. Personal protective means of hands. Protective gloves against cold. General technical requirements. Test methods

GOST EN 556-1-2011: Sterilization of medical devices. Requirements for medical devices to be designated «sterile». Part 1. Requirements for terminally sterilized medical devices

GOST EN 818-1-2011: Short link steel chains for lifting purposes. Safety. Part 1. General requirements for acceptance

GOST EN 818-2-2011: Short link steel chains for lifting purposes. Safety. Part 2. Medium tolerance steel chains for grade 8 chain slings

GOST EN 818-3-2011: Short link steel chains for lifting purposes. Safety. Part 3. Medium tolerance steel chains for grade 4 chain slings

GOST EN 818-4-2011: Short link steel chains for lifting purposes. Safety. Part 4. Chain slings of grade 8

GOST EN 818-5-2011: Short link steel chains for lifting purposes. Safety. Part 5. Chain slings of grade 4

GOST EN 822-2011: Thermal insulating products for building applications. Methods for determination of length and width

GOST EN 823-2011: Thermal insulating products for building applications. Method for determination of thickness

GOST EN 824-2011: Thermal insulating products for building applications. Method for determination of deviation from squareness

GOST EN 825-2011: Thermal insulating products for building applications. Methods for determination urement of deviation from flatness

GOST EN 826-2011: Thermal insulating products for building applications. Methods for determination of compression behaviour

GOST IEC 60034-5-2011: Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)

GOST IEC 60044-1-2013: Instrument transformers. Part 1. Current transformers

GOST IEC 60079-10-2-2011: Explosive atmospheres. Part 10-2. Classification of areas. Combustible dust atmospheres

GOST IEC 60079-30-1-2011: Explosive atmospheres. Electrical resistance trace heating. Part 30-1. General and testing requirements

GOST IEC 60127-4-2011: Miniature fuses. Part 4. Universal modular fuse-links for through-hole and surface mount types

GOST IEC 60227-7-2012: Polyvinylchloride insulated cables of rated voltages up to and including 450/750V. Part 7. Flexible cables screened and unscreened with two or more conductors

GOST IEC 60245-4-2011: Rubber insulated cables for rated voltages up to and including 450/750 V. Part 4. Cords and flexible cables

GOST IEC 60245-5-2011: Rubber insulated cables of rated voltages to 450/750 V including. Lift cables

GOST IEC 60245-6-2011: Rubber insulated cables of rated voltages up to and including 450/750 V. Arc welding electrode cables

GOST IEC 60245-7-2011: Rubber insulated cables of rated voltages to 450/750 v including. Heat-resistant ethylene-vinyl acetate rubber insulated cables

GOST IEC 60269-3-1-2011: Low-voltage fuses. Part 3-1. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). Sections I to IV

GOST IEC 60269-4-1-2011: Low-voltage fuses. Part 4-1. Supplementary requirements for fuse-links for the protection of semiconductor devices. Sections I to III. Examples of types of standardized fuse-links

GOST IEC 60331-21-2011: Tests for electric and optical fibre cables under fire conditions. Circuit integrity. Part 21. Procedures and requirements. Cables of rated voltage up to and including 0,6/1,0 kV.

GOST IEC 60331-31-2011: Tests for electric cables under fire conditions. Circuit integrity. Part 31. Procedures and requirements for fire with shock. Cables of rated voltage up to and including 0,6/1,0 kV

GOST IEC 60332-1-2-2011: Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame

GOST IEC 60332-1-3-2011: Tests on electric and optical fibre cables under fire conditions. Part 1-3. Test for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming droplets/particles

GOST IEC 60332-2-1-2011: Tests on electric and optical fibre cables under fire conditions. Part 2-1. Test for vertical flame propagation for a single small insulated wire or cable. Apparatus

GOST IEC 60332-3-21-2011: Tests on electric and optical cables under fire conditions. Part 3-21. Flame spread of vertically-mounted bunched wires or cables. Category A F/R

GOST IEC 60335-2-109-2013: Safety of household and similar electrical appliances. Part 2-109. Particular requirements for UV radiation water treatment appliances

GOST IEC 60335-2-38-2013: Safety of household and similar electrical appliances. Part 2-38. Particular requirements for commercial electric griddles and griddle grills

GOST IEC 60335-2-39-2013: Safety of household and similar electrical appliances. Part 2-39. Particular requirements for commercial electric multi-purpose cooking pans

GOST IEC 60335-2-75-2013: Safety of household and similar electrical appliances. Part 2-75. Particular requirements for commercial dispensing appliances and vending machines

GOST IEC 60360-2012: Standard method of measurement of lamp cap temperature rise

GOST IEC 60432-2-2011: Safety specifications for incandescent lamps. Part 2. Tungsten halogen lamps for domestic and similar general lighting purposes

GOST IEC 60439-3-2012: Low-voltage switchgear and control gear assemblies. Part 3. Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use. Test methods

GOST IEC 60598-2-18-2011: Luminaires. Part 2. Particular requirements. Section 18. Luminaires for swimming pools and similar applications

GOST IEC 60670-21-2013: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 21. Particular requirements for boxes and enclosures with provision for suspension means

GOST IEC 60695-2-11-2013: Fire hazard testing. Part 2-11. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products

GOST IEC 60695-2-13-2012: Fire hazard testing. Part 2-13. Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials

GOST IEC 60745-1-2011: Hand-held motor-operated electric tools. Safety and test methods. Part 1. General requirements

GOST IEC 60745-2-11-2011: Hand-held motor-operated electric tools. Safety and test methods. Part 2-11. Particular requirements for reciprocating saws (jig and sabre saws)

GOST IEC 60745-2-4-2011: Hand-held motor-operated electric tools. Safety and methods. Part 2-4. Particular requirements for sanders and polishers other than disk type

GOST IEC 60811-1-1-2011: General test methods for insulating and sheathing materials of electric and optical cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical properties

GOST IEC 60811-1-2-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods

GOST IEC 60811-1-3-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. General application methods. Methods for determining the density. Water absorption tests. Shrinkage test

GOST IEC 60811-1-4-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-4. Methods for general application. Test at low temperature

GOST IEC 60811-3-1-2011: Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking

GOST IEC 60811-3-2-2011: Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Loss of mass test. Thermal stability test

GOST IEC 60811-4-1-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 4-1. Methods specific to polyethylene and polypropylene compounds. Resistance to environmental stress cracking. Measurement of the melt flow index. Carbon black and/or mineral filler content measurement in polyethylene by direct combustion. Measurement of carbon black content by thermogravimetric analysis (TGA). Assessment of carbon black dispersion in polyethylene using a microscope

GOST IEC 60811-5-1-2011: Test methods specific to filling compounds of electric cables. Drop-point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at 23 °C. D.c. receptivity at 23 °C and 100 °C

GOST IEC 60825-1-2013: Safety of laser products. Part 1. Equipment classification, requirements and user’s guide

GOST IEC 60884-2-7-2013: Plugs and socket-outlets for household and similar purposes. Part 2-7. particular requirements for cord extension sets

GOST IEC 60950-1-2014: Information technology equipment. Safety. Part 1. General requirements

GOST IEC 60998-2-4-2011: Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for twist-on connecting devices

GOST IEC 60998-2-4-2013: Connecting devises for low-voltage circuit for household and similar purposes. Part 2-4. Particular requirements for twist-on connecting devices

GOST IEC 61010-031-2011: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 031. Safety requirements for hand-held probe assemblies for electrical measurement and test

GOST IEC 61010-2-020-2011: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges

GOST IEC 61029-2-8-2011: Electric transportable tools. Particular safety requirements and methods of testing single spindle vertical moulders

GOST IEC 61058-2-4-2012: Switches for appliances. Part 2-4. Particular requirements for independently mounted switches

GOST IEC 61058-2-5-2012: Switches for appliances. Part 2-5. Particular requirements for change-over selectors

GOST IEC 61195-2012: Double-capped fluorescent lamps. Safety specifications

GOST IEC 61199-2011: Single-capped fluorescent lamps. Safety specifications

GOST IEC 61210-2011: Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements

GOST IEC 61241-10-2011: Electrical apparatus for use in the presence of combustible dust. Part 10. Classification of areas where combustible dusts are or may be present

GOST IEC 61241-14-2011: Electrical apparatus for use in the presence of combustible dust. Part 14. Selection and installation

GOST IEC 61439-5-2013: Low-voltage switchgear and control gear assemblies. Part 5. Assemblies for power distribution in public networks

GOST IEC 61557-3-2013: Low voltage distribution systems up to 1000 V a. c. and 1500 V d. c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance

GOST IEC 61558-2-7-2012: Safety of power transformers, power supplies. Part 2-7. Particular requirements and test for transformers and power supplies for toys

GOST IEC 62040-1-2013: Uninterruptible power systems (UPS). Part 1. General and safety requirement for UPS

GOST IEC 62208-2013: Enclosures for low-voltage switchgear and control gear assemblies. General requirements

GOST IEC/PAS 62569-1-2014: Generic specification of information on products. Part 1. Principles and methods

GOST IEC/TR 61912-2-2013: Low-voltage switchgear and control gear. Overcurrent protective devices. Part 2. Selectivity under over-current condition

GOST ISO 10272-1-2013: Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of Campylobacter spp. Part 1. Detection method

GOST ISO 10326-1-2002: Vibration. Laboratory method for evaluating vehicle seat vibration. Part 1. Basic requirements

GOST ISO 105-A03-2002: Textile materials. Determination of color fastness. Part A03. Gray scale for assessing the degree of shading

GOST ISO 10727-2013: Tea and instant tea. Determination of caffeine content. Method using high-performance liquid chromatography

GOST ISO 10819-2002: Vibration and shock. Method for the measurements and evaluation of the vibration transmissibility of gloves at the palm of the hand

GOST ISO 11009-2013: Petroleum products and lubricants. Determination of water washout resistance of lubricating greases

GOST ISO 11089-2013: Raw synthetic rubber. Determination of antidegradants by high-performance liquid chromatography method

GOST ISO 1138-2013: Rubber compounding ingredients. Carbon black. Determination of total sulphur content

GOST ISO 11843-3-2005: Statistical methods. Capability of detection. Methodology for determination of the critical value for the response variable when no calibration data are used

GOST ISO 11922-1-2006: Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series

GOST ISO 12162-2006: Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service coefficient

GOST ISO 1304-2013: Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number

GOST ISO 13753-2002: Vibration and shock. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system

GOST ISO 13757-2013: Liquefied petroleum gases. Determination of oily residues. High-temperature method

GOST ISO 13851-2006: Safety of machinery. Two-hand control devices. Functional aspects and design principles

GOST ISO 13855-2006: Safety of machinery. Positioning of protective equipment with respect to the approach speeds of parts of the human body

GOST ISO 1437-2013: Rubber compounding ingredients. Carbon black. Determination of sieve residue

GOST ISO 14644-1-2002: Cleanrooms and associated controlled environments. Part 1. Classification of air cleanliness

GOST ISO 14698-1-2005: Cleanrooms and associated controlled environments. Biocontamination control. Part 1. General principles and methods

GOST ISO 14698-2-2005: Cleanrooms and associated controlled environments. Biocontamination control. Part 2. Evaluation and interpretation of biocontamination data

GOST ISO 161-1-2004: Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series

GOST ISO 17491-4-2012: Occupational safety standards system. Protective clothing providing protection from chemicals. Part 4. Method for determination of resistance to penetration by a spray of liquid (spray test)

GOST ISO 1833-2001: Textile materials. Methods of binary fibre mixtures quantitative chemical analysis

GOST ISO 1841-2-2013: Meat and meat products. Potentiometric method for determination of chloride content

GOST ISO 1940-1-2007: Vibration. Balance quality requirements for rotors in a constant (rigid) state. Part 1. Specification and verification of balance tolerances

GOST ISO 2007-2013: Unvulcanized rubber. Rapid method for determination of plasticity by plastimeter

GOST ISO 20837-2013: Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Requirements for sample preparation for qualitative detection

GOST ISO 21527-1-2013: Microbiology of food and animal feeding stuffs. Method for the enumeration of yeasts and moulds. Part 1. Colony count technique in products with water activity greater than 0,95

GOST ISO 21527-2-2013: Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of yeasts and moulds. Part 2. Colony count technique in products with water activity less than or equal 0,95

GOST ISO 21871-2013: Microbiology of food and animal feeding stuffs. Most probable number count and detection method for Bacillus cereus

GOST ISO 2322-2013: Styrene-butadiene rubber (SBR) emulsion- and solution- polymerized types. Evaluation methods

GOST ISO 247-2013: Rubber. Determination of ash

GOST ISO 2475-2013: Chloroprene rubber (CR). Evaluation methods

GOST ISO 2531-2012: Ductile iron pipes, fittings, accessories and their joints for water or gas applications. Specifications

GOST ISO 29941-2013: Mechanical contraceptives. Natural rubber latex condoms. Determination of nitrosamines content

GOST ISO 3547-1-2006: Plain bearings. Wrapped bushes. Part 1. Dimensions

GOST ISO 3547-2-2006: Plain bearings. Wrapped bushes. Part 2. Test data for outside and inside diameters

GOST ISO 3547-3-2006: Plain bearings. Wrapped bushes. Part 3. Lubrication holes, lubrication grooves and lubrication indentations

GOST ISO 3547-4-2006: Plain bearings. Wrapped bushes. Part 4. Materials

GOST ISO 362-2006: Noise. Measurement of noise emitted by accelerating road vehicles. Engineering method

GOST ISO 4065-2005: Thermoplastics pipes. Universal wall thickness table

GOST ISO 4097-2013: Rubber, ethylene-propylene-diene (EPDM). Evaluation methods

GOST ISO 4209-2-2006: Truck and bus tyres and rims (metric series). Part 2. Rims

GOST ISO 4379-2006: Plain bearings. Copper alloy bushes

GOST ISO 4383-2006: Plain bearings. Multilayer materials for thin-walled plain bearings

GOST ISO 4407-2006: Industrial cleanliness. Determination of fluid contamination by the counting method using an optical microscope

GOST ISO 5530-1-2013: Wheat flour. Physical characteristics of doughs. Part 1. Determination of water absorption and rheological properties using farinograf

GOST ISO 6530-2012: Occupational safety standards system. Protective clothing for protection against liquid chemicals. Method for determination of materials resistance to liquids penetration

GOST ISO 6734/IDF 15-2012: Sweetened condensed milk. Determination of total solids content (reference method)

GOST ISO 7218-2015: Microbiology of food and animal feed. General requirements and guidance for microbiological examinations

GOST ISO 7781-2013: Raw styrene-butadiene rubber. Determination of soap and organic-acid content

GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation

GOST ISO 8528-12-2011: Reciprocating internal combustion engine driven alternating current generating sets. Part 12. Emergency power supply to safety services

GOST ISO 8528-6-2011: Reciprocating internal combustion engine driven alternating current generating sets. Part 6. Test methods

GOST ISO 8573-3-2006: Compressed air. Part 3. Test methods for measurement of humidity

GOST ISO 8573-5-2006: Compressed air. Part 5. Test methods for oil vapour and organic solvent content

GOST ISO 8681-2013: Petroleum products and lubricants. Method of classification. Definition of classes

GOST ISO/IEC 15420-2010: Automatic identification. Bar coding. EAN/UPC bar code symbology specification

GOST ISO/IEC 15459-1-2008: Automatic identification. International unique identifiers. Part 1. Unique identifiers for transport units

GOST ISO/IEC 15459-2-2008: Automatic identification. International unique identifiers. Part 2. Registration procedures

GOST ISO/IEC Guide 65-2012: General requirements for bodies operating product certification systems

GOST ISO/TO 10949-2007: Industrial cleanliness. Guidelines for provision and controlling cleanliness of hydraulic fluid power components from manufacture to installation

GOST ISO/TS 10272-2-2013: Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of Campylobacter spp. Part 2. Colony-count technique

GOST ISO/TS 16431-2007: Industrial cleanliness. Verification of hydraulic fluid power systems cleanliness

GOST MEK 60335-2-23-2009: Household and similar electrical appliances. Safety. Part 2-23. Particular requirements for appliances for skin or hair

GOST MEK 60335-2-26-2008: Household and similar electrical appliances. Safety. Part 2-26. Particular requirements for clocks

GOST MEK 60335-2-31-2010: Household and similar electrical appliances. Safety. Part 2-31. Particular requirements for range hoods and other cooking fume extractors

GOST MEK 60335-2-3-2009: Household and similar electrical appliances. Safety. Part 2-3. Particular requirements for electric irons

GOST MEK 60335-2-35-2009: Household and similar electrical appliances. Safety. Part 2-35. Particular requirements for instantaneous water heaters

GOST MEK 60335-2-41-2009: Household and similar electrical appliances. Safety. Part 2-41. Particular requirements for pumps

GOST R 1.0-2012: Standardization in the Russian Federation. Basic provisions

GOST R 1.5-2002: State system for standardization of Russian Federation. Standards. General requirements for structure, drafting, presentation, content and indication

GOST R 1.8-2002: State system for standardization of Russian Federation. Interstate standards. Rules of developing, application, renovation and cease application concerning Russian Federation

GOST R 1.8-2004: Standardization in the Russian Federation. Interstate standards. Rules of developing, application, renovation and cease application in the Russian Federation

GOST R 1.8-2011: Standardization in Russian Federation. Interstate standards. Rules of developing, application, renovation and cease of application in the Russian Federation

GOST R 1.8-95: State System for Standardization of Russian federation. Procedure for developing and application interstate standards

GOST R 12.4.233-2007: Occupational safety standards system. Respiratory protective devices. Terms and definitions

GOST R 50644-94: Tourist-excursion service. Requirements provided for tourist's and excursionist's security

GOST R 52069.0-2003: Safety of information. System of standards. Basic principles

GOST R 52330-2005: Non-destructive testing. Evaluation of deformations in industrial and vehicle structures. General requirements

GOST R 52350.1-2005: Electrical apparatus for explosive gas atmospheres. Part 1. Flameproof enclosures 'd'

GOST R 52442-2005: Pneumatic stopper drills. General technical requirements

GOST R 52443-2005: Pneumatic rock drills. General technical requirements

GOST R 52985-2008: Ecological safety of rocket-space technique. General technical requirement

GOST R 53165-2008: Lead-acid storage starter batteries for motor-tractors. General specifications

GOST R 53617-2009: Carbon brushes for electrical machines. Construction. Types and dimensions

GOST R 54069-2010: Electrical apparatus for potentially explosive atmospheres. Group I. Intrinsically safe systems. Part 1. Construction and testing

GOST R 54070-2010: Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment

GOST R 54371-2011: Safety in electric heating installations. Part 9. Particular requirements for high-frequency dielectric heating installations

GOST R 54372-2011: Safety in electric heating installations. Part 6. Specifications for safety in industrial microwave heating equipment

GOST R 54466-2011: Rotating electrical machines. Asynchronous explosion-proof motors of power from 0,25 to 400 kW inclusive. General technical requirements and test methods

GOST R 54707-2011: Digital audio broadcasting system DRM. Single-channel simulcast transmission of programs (SCS)

GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications

GOST R 55026-2012: Design of fans working in potentially explosive atmospheres

GOST R EN 13463-2-2009: Non-electrical equipment for use in potentially explosive atmospheres. Part 2. Protection by flow restricting enclosure «fr»

GOST R EN 13463-6-2009: Non-electrical equipment for use in potentially explosive atmospheres. Part 6. Protection by control of ignition source «b»

GOST R EN 13463-8-2009: Non-electrical equipment for use in potentially explosive atmospheres. Part 8. Protection by liquid immersion «k»

GOST R IEC 60079-10-2-2010: Explosive atmospheres. Part 10-2. Classification of areas. Combustible dust atmospheres

GOST R IEC 60079-1-2008: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'

GOST R IEC 60079-13-2010: Explosive atmospheres. Part 13. Equipment protected by pressurized rooms «p»

GOST R IEC 60079-17-2010: Explosive atmospheres. Part 17. Electrical installations inspection and maintenance

GOST R IEC 60079-2-2009: Explosive atmospheres. Part 2. Equipment protection by pressurized enclosure 'p'

GOST R IEC 60079-25-2008: Explosive atmospheres. Part 25. Intrinsically safe systems

GOST R IEC 60079-31-2010: Explosive atmospheres. Part 31. Equipment dust ignition protection by enclosure «t»

GOST R IEC 60254-2-2009: Lead-acid traction batteries. Part 2. Dimensions of cells and terminals and marking of polarity on cells

GOST R IEC 61241-14-2008: Electrical apparatus for use in the presence of combustible dust. Part 14. Selection and installation

GOST R IEC 61241-17-2009: Electrical apparatus for use in the presence of combustible dust. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)

ID 24.2001: Organization of Design (Commentaries on Performance of Design Activity and Certain Provisions of Standards and Procedural Issues on Organization of Design)

MDS 12-53.2010: Layouts of administrative and regulatory documents of the labor protection management system of a construction organization. Toolkit

MI 2131-90: Goniometers with nonius

MI 485-84: Guidelines. Microsyringe "Gazokhrom 101". Methods and means of verification

MSN 10-01-2012: System of interstate normative documents in construction. Basic principles

MUK 2.3.2.971-00: The order of sanitary-epidemiological examination of technical documents for food

MUK 4.1.2141-06: Methodological guidelines for the measurement of mancozeb concentrations in the atmospheric air of populated areas by gas-liquid chromatography

OIT-0011-1999: System of certification of equipment, products and technologies for nuclear installations, radiation sources and storage facilities. Basic curriculum of the training centers of the System

OST 34-38-446-84: Specifications for complete overhaul. Rules of construction, structure and presentation. The procedure for coordination, approval and registration.

OST 36-122-85: Steel building structures. Field connections on dowels. General requirements.

OST 36-2-80: Procedure of development, coordination and approval of standards in the system of Minmontazhspetsstroy USSR

OST 45.52-97: Industry Standardization System. The procedure for developing enterprise standards

OST 45.59-98: The industry standardization system. Main provisions

OST 45.85-96: Wooden and metal shelf stands for electric power storages applied by telecommunication enterprises. General requirements.

OST 45.86-96: Line-switching rooms of terminal toll offices of net nodes, amplifying and regeneration stations. Design requirements.

PMG 02-2008: Standard provision for interstate technical committee for standardization

PMG 03-93: The order of registration and preparation for publication interstate standart normative documents

PMG 04-94: Procedure for distribution of interstate standards and normative documentation of Interstate Council for Standardization, Metrology and Certification.

PMG 28-99: State system for ensuring uniformity of measurements. The order of development and certification of standard reference data in the interstate system of data on physical constants and properties of substances and materials

PMG 92-2009: The metrological expert evaluation of interstate and national standarts projects

PMG 96-2009: State system for ensuring the uniformity of measurements. Results and characteristics of measurement quality

PO 1.3.2.13.1054-2015: The management system for the provision of personal protective equipment for employees of Rosenergoatom Concern JSC

R 50.1.004-2002: Preparation of Intergovernmental Standards for Adoption and Enactment in the Russian Federation and Preparation for Cancellation of Them

R 50.1.004-2011: Preparation of interstate standards for adoption and application in the Russian Federation as national standards

R 50.1.004-95: The order of preparation in Gosstandart of Russia of interstate standards for use in the Russian Federation

RD 04-287-99: Procedural Ordinance on Development (Revision) and Enactment of Regulatory Documents of Gosgortekhnadzor of Russia and Review of Regulatory Documents of Other Federal Executive Agencies

RD 50-135-78: Guidelines. The composition and content of the draft COP UKP

RD 50-138-78: Guidelines. The composition and content of the standard of the enterprise "Integrated product quality management system. Basic provisions"

RD 50-216-80: Guidelines. Quantitative methods for optimizing the parameters of standardization objects. Basic provisions for ensuring widespread adoption. Directions of work and unification of methods and documents

RD 50-338-82: Guidelines. Calculations and tests of strength. The procedure for the development of inter-sectoral guidelines for methods of calculation and testing

RD 50-386-83: Guidelines. Certification of design and survey stations for the chemicalization of agriculture and agrochemical laboratories of the union "Soyuzselkhozkhimiya"

RD 52.24.394-95: Guidelines. Methods for measuring the mass concentration of ammonium ions in surface water by a potentiometric method with an ion-selective electrode

RMG 101-2010: State system for ensuring the uniformity of measurements. Petroleum quantity and parameters of quality measurements systems. Metrological and technical specifications to the designing

RMG 102-2010: Conformity assessment (confirmation) modules and certification schemes

RMG 103-2010: State system for ensuring the uniformity of measurements. Proficiency testing of test (measurement) laboratories, conducting the tests of substances, materials and environmental objects (for composition and physico-chemical properties) by means of interla

RMG 104-2010: State system for ensuring the uniformity of measurements. Oil. The residual maintenance of gas. Procedure of measurements

RMG 105-2010: State system for ensuring the uniformity of measurements. Vertical steel cylindrical tanks with thermal insulation. Procedure of verification bi geometrical method

RMG 108-2011: State system for ensuring the uniformity of measurements. Verticil reinforced-concrete tanks. Procedure of verification by volumetric method

RMG 109-2011: State system for ensuring the uniformity of measurements. Oil. Sampling from the pipelines

RMG 116-2011: State system for ensuring the uniformity of measurements. Tanks of main oil lines and oil storage depots. Maintenance operations and metrological assurance under operating conditions

RMG 24-97: Recommendations for the development of standards by intergovernmental technical committees on standardization

RMG 29-2013: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

RMG 45-2003: Presentation of requirements as to environment factors when using IEC and ISO standards in normative standardization documents. General

RMG 50-2002: Recommendations for application of references to standards in documentation and for indication of standard reference numbers in marking

RMG 53-2002: State system for ensuring the uniformity of measurements. Reference materials. Evaluation of metrological characteristics with the use of measurement standards and reference devices

RMG 54-2002: State system for ensuring the uniformity of measurements. Calibration characteristics of means of measurement of composition and properties of substances and materials. Measurement procedure with the use of reference materials

RMG 55-2003: State system for ensuring the uniformity of measurements. Reference materials for composition of pure organic substances. Methods of certification. Principles basic

RMG 56-2002: State system for ensuring the uniformity of measurements. Sets of reference materials of composition of substances and materials. Mutual comparison procedure

RMG 59-2003: State system for ensuring the uniformity of measurements. Checking of the availability of reagents out of the guaranty storage period for using in laboratory by method of internal laboratory control of test results accuracy

RMG 74-2004: State system for ensuring the uniformity of measurements. Methods for determining the intervals of verification and calibration of measuring instruments

RMG 75-2004: State system for ensuring the uniformity of measurements. Measurements of substances moisture. Terms and definitions

RMG 76-2004: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy

RMG 76-2014: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy

RMG 85-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in railway tanks in the system of main oil pipeline transport. The main provisions

RMG 86-2009: State system for ensuring the uniformity of measurements. Mass of petroleum. Measurement procedure in vertical tanks in the main petrowire systems. Basic propositions

RMG 87-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in horizontal tanks in the system of main oil pipeline transport. The main provisions

RMG 88-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in motorcar tanks in the system of main oil pipeline transport. The main provisions

RMG 89-2010: State system for ensuring the uniformity of measurements. Acceptance point of oil. Metrological and technical assurance

RMG 91-2009: State system for ensuring the uniformity of measurements. Joint use of concepts 'error of measurement' and 'uncertainty of measurement'. General principles

RMG 93-2009: State system for ensuring the uniformity of measurements. Estimation of metrological characteristics of reference materials

RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements

RMG 99-2010: State system for ensuring the uniformity of measurements. Procedure of metrological and technical ensuring of operation of measuring systems for oil quantity and quality metrics, pipe-piston calibration setup and measuring instruments as their components

STO DOKTOR BETON 68686983-001-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Classification. Nomenclature of indicators. Technical requirements

STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics

STO DOKTOR BETON 68686983-003-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technologies execution and methods estimation of quality

VSN 178-91: Standards for Planning and Executing Drilling and Blasting Operations in Roadbed Construction