PR 50.2.006-94
ПР 50.2.006-94
|
|
Procedure for calibration of measurement equipment
Порядок проведения поверки средств измерений (ПР 50.2.006)
This document applies to measuring instruments for release from production and repair, for importing and operating, selling and renting, to be used and applied in the fields of state metrological control and supervision, in accordance with the Law of the Russian Federation "On ensuring the uniformity of measurements", and establishes requirements for the organization and procedure for the calibration of measuring instruments
Настоящий документ распространяется на средства измерений при выпуске из производства и ремонта, при ввозе по импорту и эксплуатации, продаже и прокате, подлежащие применению и применяемые в сферах распространения государственного метрологического контроля и надзора, в соответствии с Законом Российской Федерации «Об обеспечении единства измерений», и устанавливает требования к организации и порядку проведения поверки средств измерений
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
7/18/1994
SKU: RUSS17295
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Committee of Russian Federation for Standardization, Metrology and Certification »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State system for ensuring the uniformity of measurements (GSI) »
The Document is Referenced By:
FR 1.29.2009.06689: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement procedure in vertical tanks
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 11828-86: Rotating electrical machines. General test methods
GOST 12.0.005-2014: System of labor safety standards Metrological support in the field of occupational safety. The main provisions
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.289-2015: Occupational safety standards system. Insulating suits with forced oxygen supply into interior space of the suit. Test methods
GOST 16765-87: General-purpose self-propelled boom cranes. Acceptance and testing methods
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 20790-93: Medical instruments, apparatus and equipment. General specifications
GOST 27336-2016: Concrete pump. General specifications
GOST 27339-2016: Truck mixer. General specifications
GOST 27614-2016: Cement carriers. General specifications
GOST 27692-2012: Maintenance documentation for aeronautical engineering. Structure, statement, execution and contents of log books
GOST 27693-2012: Maintenance documentation for aeronautical engineering. Structure, statement, execution and contents of registration certificates, labels and air worthiness certificates
GOST 27816-88: Asphalt paver. Test methods
GOST 28275-94: Fresh food garden carrots. Guide to storage
GOST 28307-2013: Tractor-drawn trailers and semi-trailers. Methods of testing
GOST 28373-94: Round-headed and Savoy cabbage. Guide to storage
GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 29075-91: Nuclear instrumentation systems for nuclear power stations. General requirements
GOST 29168-91: Building mast freight hoists
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 30248-2013: Electrical carbon products. Electrical heating appliances made of carbon fibre materials. General specifications
GOST 30762-2001: Refractory products. Methods of measuring geometrical dimensions, defects of shape and surfaces
GOST 31345-2007: Tractor seeders. Test methods
GOST 31402-2009: Brake cylinders for railway rolling stock. General specifications
GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST 31548-2012: Self-propelled road rollers. General specifications
GOST 31550-2012: Pile driving hammers. Specifications
GOST 31552-2012: Plate compactor. General specifications
GOST 31554-2012: Front end loaders with telescopic boom. General specifications
GOST 31559-2012: Anchor supports. General pecifications
GOST 31562-2012: Рneumatic rock drills. General technical requirements
GOST 31563-2012: Pneumatic hammer drills. Technical requirements and testing methods
GOST 32203-2013: Railway rolling stock. Acoustics. Measurement of outward noize
GOST 32206-2013: Special railway rolling stock. Outdoor noise. Measuring standards and methods of determination
GOST 33115-2014: Electric generating plants with diesel and gas internal combustion engines. General specification
GOST 33116-2014: Generating sets driven by gasoline internal combustion engines. General specifications
GOST 33257-2015: Pipeline valves. Methods of control and testing
GOST 33435-2015: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST 33436.4-1-2015: Electromagnetic compatibility of technical equipment. Systems and equipment of railway transport. Part 4-1. Devices and equipment of railway automatics and telemechanics. Requirements and testing methods
GOST 33463.2-2015: Life support systems on railway rolling stock. Part 2. Test methods for determining the parameters of vibroacoustic in dikators
GOST 33463.6-2016: Life support systems on railway rolling stock. Part 6. Methods of hygienic assessment of the water supply system
GOST 33661-2015: Protecting constructions of the railway rolling stock premises. Test methods for determining the thermal technical indicators
GOST 33754-2016: Emissions of harmful substances and smoke of exhaust gases of autonomous traction and motor rolling stock. Norms and determination methods
GOST 4.392-85: Product-quality index system. Electricity meters. Index nomenclature
GOST 7328-2001: Weights. General specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.046-2010: State system for ensuring the uniformity of measurements. Optical dividing heads. Verification procedure
GOST 8.237-2003: State system for ensuring the uniformity of measurements. Single-value electrical resistance measures. Verification procedure
GOST 8.247-2004: State system for ensuring the uniformity of measurements. Sounding sticks for oil product level measuring in horizontal tanks. Calibration methods
GOST 8.255-2003: State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure
GOST 8.259-2004: State system for ensuring the uniformity of measurements. Electrical induction active and reactive energy meters. Methods of verification
GOST 8.292-2013: State system for ensuring the uniformity of measurements. Laboratory conductometers of liquid. Verification procedure
GOST 8.338-2002: State system for ensuring the uniformity of measurements. Thermoelectric transducers. Verification procedure
GOST 8.393-2010: State system for ensuring the uniformity of measurements. Optical Quadrants. Verification procedure
GOST 8.469-2002: State system for ensuring the uniformity of measurements. Automatic continuous proportional weighers. Methods and means of verification
GOST 8.518-2010: State system for ensuring the uniformity of measurements. Ferritometers for austenitic steels. Verification procedure
GOST 8.523-2004: State system for ensuring the uniformity of measurements. Gravimetric filling instruments. Verification procedure
GOST 8.523-2014: State system for ensuring the uniformity of measurements. Gravimetric filling instruments. Verification procedure
GOST 8.584-2004: State system for ensuring the uniformity of measurements. Alternating current static meters for active energy. Methods of verification
GOST 8.596-2010: State system for ensuring the uniformity of measurements. NMR-analysers for definition of oiliness and moisture content of agricultural materials. Verification procedure
GOST 8.615-2013: State system for ensuring the traceability of measurements. Instruments for measuring vehicle exhaust emissions. Verification procedure
GOST 8.616-2013: State system for ensuring the uniformity of measurements. Laboratory and stream chromatographs for control of component composition Liquefied hydrocarbon fuel gases. The method of verification
GOST 8.617-2013: State system for ensuring the traceability of measurements. Non-dispersive infrared (NDIR) gas analysers for determination of carbon monoxide in the vapour phase of cigarette smoke. The method of verification
GOST 8.618-2013: State system for ensuring the traceability of measurements. Gas analysers and gas alarm devices for determination of combustible gases and vapours in working zone air. Verification procedure
GOST 8.624-2013: State system for ensuring the traceability of measurements. Laboratory water in crude oil analysers. Verification method
GOST 8.627-2013: State system for ensuring the traceability of measurements. In vitro diagnostics medicine test systems for measurement of quantities in biological samples. Part 1. Haematology analysers. Method of verification
GOST 8.628-2013: State system for ensuring the traceability of measurements. Medical electrical products. Веdside monitors. Verification method
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 9218-2015: Automotive vehicles for transportation of food liquids. Requirements and test methods
GOST R 12.4.186-2012: Occupational safety standards system. Respiratory individual protective devices. Closed-circuit breathing apparatus compressed air type. Technical requirements. Test methods. Marking. Simples selection rules
GOST R 12.4.273-2012: Occupational safety standards system. Respiratory protective devices. Self-contained open-circuit compressed air supply apparatus completed with face mask or mouthpiece (escape breathing apparatus). Technical requirements. Test methods. Marking
GOST R 12.4.274-2012: Occupational safety standards system. Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking
GOST R 12.4.275-2012: Occupational safety standards system. Respiratory protective devices. Powered atmospheric air supply hose apparatus with helmet. Technical requirements. Test methods. Marking
GOST R 12.4.276-1-2012: Occupational safety standards system. Respiratory protective devices. Compressed air line supply breathing apparatus. Part 1. Apparatus with a full face mask. Technical requirements. Test methods. Marking
GOST R 12.4.278-2012: Occupational safety standards system. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask, designed to be used with positive pressure only. Technical requirements. Test methods. Marking
GOST R 17.2.2.06-99: Nature protection. Atmosphere. Norms and methods of measuring of carbon monoxide and hydrocarbons content in exhaust gases from motor vehicles with spark ignition engines used gas fuel
GOST R 22.9.25-2014: Safety in emergency. Hydraulic emergency and rescue tools. Test methods
GOST R 33.1.02-2008: United Russian insurance fund of documentation. Insurance copies of cinemadocumentation and photodocumentation. General specifications
GOST R 33.3.02-2008: United Russian insurance fund of documentation. Insurance copies of documentation being a national scientific, cultural and historical heritage. General requirements for conditions of storage
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 50522-93: Table grapes. Guide to cold storage
GOST R 50528-93: Fresh apples. Storage in controlled atmospheres
GOST R 50656-2001: Electromagnetic compatibility of technical equipment. Technical equipment for railway control systems. Requirements and test methods
GOST R 50809-95: Numbering and metrological ensuring of identification cards for financial settlements
GOST R 50860-2009: Aircrafts and helicopters. Antenna feeder devices of connection, navigation, landing and air traffic control. General technical requirements, parameters, methods of measurements
GOST R 50953-2008: Emission of the exhaust gas pollutants by the main-line and shunting diesel locomotives. Norms and determination methods
GOST R 51136-2008: Protective laminate glass. General specifications
GOST R 51136-98: Protective laminate glass. General specifications
GOST R 51194-98: Brushes of electrical machines. Methods of dimensions examination
GOST R 51288-99: Means for measuring electric and magnetic quantities. Exploitation documents
GOST R 51515-99: Electromagnetic compatibility of technical equipment. Immunity of sound and television broadcast receivers and associated equipment to electromagnetic disturbances. Requirements and test methods
GOST R 51601-2000: Building single-bucket loaders. Specifications
GOST R 51855-2001: Electromagnetic compatibility of technical equipment. Angle modulated personal use radio equipment operating in frequency band 26965 kHz - 27860 kHz. Requirements and test methods
GOST R 51856-2001: Electromagnetic compatibility of technical equipment. Short range devices operating on frequencies between 3 kHz and 400 GHz. Requirements and test methods
GOST R 51857-2001: Electromagnetic compatibility of technical equipment. On-site paging equipment. Requirements and test methods
GOST R 51945-2002: Aspirators. General specifications
GOST R 52042-2003: Anchor supports. General specifications
GOST R 52136-2003: Electrical apparatus for the detection and measurement of flammable gases. Part 1. General requirements and test methods
GOST R 52152-2003: Long wall powered roof chocks. Basic parameters. General technical requirements. Test methods
GOST R 52156-2003: Self-propelled road rollers. General specifications
GOST R 52220-2004: Monorail transport system electrical rolling stock. General safety requirements
GOST R 52232-2004: Light rail cars. General specifications
GOST R 52278-2004: Monorail transport system rolling stock. Carrying out the repair. General specifications
GOST R 52392-2005: Brake cylinders for railway rolling stock. General specifications
GOST R 52442-2005: Pneumatic stopper drills. General technical requirements
GOST R 52443-2005: Pneumatic rock drills. General technical requirements
GOST R 52455-2005: Global navigation satellite system and global position system. General-purpose maritime receiver equipment. Technical requirements
GOST R 52456-2005: Global navigation satellite system and global position system. Individual receiver equipment for automobile transport. Technical requirements
GOST R 52752-2007: Formworks. Test methods
GOST R 52757-2007: Beet harvesters. Test methods
GOST R 52758-2007: Agricultural purpose loaders and conveyors. Test methods
GOST R 52920-2008: Wheelsets for the traction railway stock. Method of measuring the electrical resistance
GOST R 52931-2008: Instruments for process monitoring and control. General specifications
GOST R 53009-2008: Environmental control and monitoring systems. General guidelines on creation, adoption and ensuring functioning of the chemical weapons destruction
GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST R 53402-2009: Pipeline valves. Methods of control and testing
GOST R 53424-2009: Mechanical seals for freight containers. General technical requirements
GOST R 53424-2018: Mechanical seals for freight containers. General technical requirements
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 54061-2010: Railway applications. Acoustics. Measurement of noise emitted by railbound vehicles
GOST R 54092-2010: Special railway rolling stock. Outdoor noise. Measuring standards and methods of determination
GOST R 54455-2011: Alarm systems. Environmental test methods
GOST R 54747-2011: Ferro-concrete cross ties for railways for 1520 mm gauge railways. General specifications
GOST R 54773-2011: Anchor supports. Test methods for anchor
GOST R 54794-2011: Analysers of the content of ethanol. General specifications
GOST R 54798-2011: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST R 55006-2012: Stationary diesel and gas fuelled power plants with internal combustion engines. General specifications
GOST R 55161-2012: Mining equipment. Borers mining hand pneumatic. Safety requirements and methods of testing
GOST R 55175-2012: Mine atmosphere. Methods of dust content control
GOST R 55259-2012: Plants for artificial drying of hay. Test methods
GOST R 55261-2012: Testing agricultural tractors and machines. Potato planters. Methods of testing
GOST R 55262-2012: Dry machines and installing the agricultural purpose. Methods of testing
GOST R 55496-2013: Motor railway rolling stock. Methodology of dynamic-strength tests
GOST R 55508-2013: Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics
GOST R 55867-2013: Air transport. Metrological support on air transport. General principles
GOST R 56006-2014: Pipeline valves. Testing and acceptance on objects of the gas main pipelines before commissioning. General technical requirements
GOST R 56097-2014: Space systems. Non-destructive testing. Magnetic ponderomotive testing method of Ni, NiCr platings
GOST R 56157-2014: Soil. Procedures (methods) of analysis of composition and properties of soil samples. General requirements for development
GOST R 56168-2014: Medical electrical equipment. Operation microscope. Specifications for governmental purchase
GOST R 56278-2014: Medical electrical equipment. Videoendoskopic complexes with installations for ultrasonic and fluorescence endoscopy. Specifications for governmental purchase
GOST R 56289-2014: Explosion venting constructions for buildings. Testing methods at emergency internal explosions
GOST R 56466-2015: Space systems. Materials test methods. Method of determining the linear thermal expansion coefficient composites at high temperatures
GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications
GOST R 56648-2015: Electronic components for rocket and space technology. Input inspection and additional testing. General provisions
GOST R 56666-2015: Technical diagnostics. Acoustic method of diagnostics and evaluation a residual resource of side frames trucks wagons. General requirements
GOST R 56963-2016: Locomotives. Lacquer and antidischarge coating requirements and methods of their control
GOST R 57395-2017: Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters
GOST R 58358.1-2019: Basic supporting structures of the first level of electronic equipment. General specifications
GOST R 58358.2-2019: Basic supporting structures of the second level of electronic equipment. General specifications
GOST R 58358.3-2019: Basic supporting structures of the third level of electronic equipment. General specifications
GOST R 58798-2020: Digital broadcast television. DVB-T2 over-the-air digital television broadcast receivers supporting HEVC video compression standard. main parameters
GOST R 8.561-95: State system of ensuring the uniformity of measurements. Metrological ensuring of bank technologies. General principles
GOST R 8.566-2012: The state system for assuring the traceability of measurements. The blackbody radiators. Standard procedure for verification and calibration
GOST R 8.569-98: State system for ensuring the uniformity of measurements. Vehicle tanks for oil product liquids. Methods of verification
GOST R 8.581-2001: State system for ensuring the uniformity of measurements. Air-heat installations for measuring moisture of cereals and cereal products. Verification procedure
GOST R 8.586-2001: State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of artificial and natural radiation for the safety of museum exhibits. Methods for verification
GOST R 8.589-2001: State system for ensuring the uniformity of measurements. Control of nature environment soiling. Metrological ensuring. General principles
GOST R 8.590-2001: State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of ultraviolet radiation in labour safety. Methods for verification
GOST R 8.594-2002: State system for ensuring the uniformity of measurements. The metrological ensuring of radiation control. General principles
GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
GOST R 8.598-2003: State system for ensuring the uniformity of measurements. Weighbridges for weighing of cinder vehicles in motion. Verification procedure
GOST R 8.603-2003: State system for ensuring the uniformity of measurements. Weighbridges for weighing of road vehicles in motion. Verification procedure
GOST R 8.608-2004: State system for ensuring the uniformity of measurements. Mountings for verification of instruments measuring the expenditure and volume of water by calibrating with transformers (meters) of expenditure and (or) volume of water. General metrological and technical requirements
GOST R 8.611-2005: State system for ensuring the uniformity of measurements. Standard thermoelectric platinum rhodium/platinum converters of the first, the second and the third grades. Verification procedure
GOST R 8.615-2005: State system for ensuring the uniformity of measurements. The measuring of quantity of taken from bowels oil and oil gas. General metrological and technical requirements
GOST R 8.632-2007: State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Main principles
GOST R 8.642-2008: State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles
GOST R 8.657-2009: State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
GOST R 8.660-2009: State system for ensuring the uniformity of measurements. Industrial application level gauges. Calibration methods
GOST R 8.665-2009: State system for ensuring the uniformity of measurements. Photo-electric luхmeter and brightness meter. Methods of verification
GOST R 8.666-2009: State system for ensuring the uniformity of measurements. Moisture meters neutron. The method of verification
GOST R 8.669-2009: State system for ensuring the uniformity of measurements. Vibrometers with piezoelectric, induction and eddy current vibrations transducers. Methods of verification
GOST R 8.670-2009: State system for ensuring the uniformity of measurements. Precision inductive transducers for linear dimensions (parameters). Methods of verifications
GOST R 8.671-2009: State system for ensuring the uniformity of measurements. In process gauges of linear parameters. Verification methods
GOST R 8.672-2009: State system for ensuring the uniformity of measurements. Transducers with electric contacts for measuring the linear dimensions (parameters). Verification methods
GOST R 8.677-2009: State system for ensuring the uniformity of measurements. Cylindrical thread gauges. Verification procedure
GOST R 8.679-2009: State system for ensuring the uniformity of measurements. Technical metallic gauging tanks. Methods of verification
GOST R 8.682-2009: State system for ensuring the uniformity of measurements. Standard metallic gauges. Methods of verification
GOST R 8.701-2010: State system for ensuring the uniformity of measurements. Liquid purity measuring instruments. Verification procedure
GOST R 8.704-2010: State system for ensuring the uniformity of measurements. Working dilatometers. Verification procedure
GOST R 8.705-2010: State system for ensuring the uniformity of measurements. Embedded and external photometers for high-energy laser medical apparatus. Verification procedure
GOST R 8.706-2010: State system for ensuring the uniformity of measurements. Embedded and external photometers for laser therapeutic apparatus. Method of verification
GOST R 8.707-2010: State system for ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Verification procedure
GOST R 8.708-2010: State system for ensuring the uniformity of measurements. Piezosorption hygrometers. Verification procedure
GOST R 8.709-2010: State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification
GOST R 8.710-2010: State system for ensuring the uniformity of measurements. Polarimeters and saccharimeters. Verification procedure
GOST R 8.718-2010: State system for ensuring the uniformity of measurements. Taximeters. Verification procedure
GOST R 8.719-2010: State system for ensuring the uniformity of measurements. Tachometers. Verification procedure
GOST R 8.720-2010: State system for ensuring the uniformity of measurements. Optical power meters, optical radiation sources, return loss meters and optical testers for fibre-optical transfer systems. Verification procedure
GOST R 8.722-2010: State system for ensuring the uniformity of measurements. Conductometric liquid analyses. Verification procedure
GOST R 8.729-2010: State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
GOST R 8.730-2010: State system for ensuring the uniformity of measurements. Interference refractometers for gas analysis. Verification procedure
GOST R 8.733-2011: State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements
GOST R 8.742-2011: State system for ensuring the uniformity of measurements. Measuring installations of 1-st class of moisture content in firm substances and materials. Verification procedure
GOST R 8.754-2011: State system for ensuring the uniformity of measurements. Analysers of oxygen dissolved in water. Verification procedure
GOST R 8.757-2011: State system for ensuring the uniformity of measurements. Condensation hygrometers. The method of verification
GOST R 8.771-2011: State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. The method of verification
GOST R 8.778-2011: State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
GOST R 8.781-2012: State system for ensuring the uniformity of measurements. Moisture meters of grain and grain processing products. Verification procedure
GOST R 8.784-2012: State system for ensuring the uniformity of measurements. Measuring installations - standards of 2-nd class of moisture content of firm and loose materials. Verification procedure
GOST R 8.786-2012: State system for ensuring the uniformity of measurements. Fuel oil mass. Measurement procedure in horizontal storage tanks by indirect method of static measurements. General metrological requirements
GOST R 8.787-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement of the fuel oil mass in railway tanks. General metrological requirements
GOST R 8.788-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement procedure in vertical storage tanks. General metrological requirements
GOST R 8.789-2012: State system for ensuring the uniformity of measurements. The bomb calorimeters. The method of the verification
GOST R 8.790-2012: State system for ensuring the uniformity of measurements. The temperature lamps
GOST R 8.791-2013: State system for ensuring the uniformity of measurements. Radioisotope and piezobalance analysers for mass concentration of aerosol particles in air of the working zone. The method of verification
GOST R 8.793-2012: State system for ensuring the uniformity of measurements. Satellite geodetic equipment. Verification procedure
GOST R 8.794-2012: State system for ensuring the uniformity of measurements. Ground laser scanners. Verification procedure
GOST R 8.796-2012: State system for ensuring the uniformity of measurements. Torque measuring devices. Verification procedure
GOST R 8.812-2013: State system for ensuring the traceability of measurements. Multifunctional information measuring systems for mines and underground digging safety. Dust and gas measuring heads for mine air. Verification procedure
GOST R 8.837-2013: Gas chromatographs for measurement of content of volatile halogenated organic compounds impurities in tap, drinking, natural and waste waters. Verification method
GOST R 8.838-2013: State system for ensuring the uniformity of measurements. Ethanol Content Analysers. Verification procedure
GOST R 8.856-2013: State system for ensuring the uniformity of measurements. Glass electrodes, including combination electrodes, for pH measurement in aqueous solutions. Verification procedure
GOST R 8.857-2013: State system for ensuring the uniformity of measurements. pH-meters. Verification procedure
GOST R 8.867-2014: The state system of measurement assurance. The verification of a measuring instruments of direct current in range from 1·10 raised to the power of-15 to 1·10 raised to the power of -9 A
GOST R 8.874-2014: State system for ensuring the uniformity of measurements. Autocollimators. Verification Procedure
GOST R 8.876-2014: State system for ensuring the uniformity of measurements. Theodolites. Verification procedure
GOST R 8.877-2014: The state system of measurement assurance. Measures of electromotive force (standard cells) and measures of direct electrical voltage. Methods of verification
GOST R 8.881-2015: State system for ensuring the uniformity of measurements. Moisture meters of wood and sawn timber. Verification procedure
GOST R 8.889-2015: State system for ensuring the traceability of measurements. Scanning spectrofluorimeters. Verification procedure
GOST R 8.896-2015: State system for ensuring the uniformity of measurements. Laser analyzers of particle size. Verification procedure
IBJaL.413411.056 MP: Signaling devices for carbon monoxide and combustible gases STG-1. Verification Method
IBJaL.413411.058 MP: Gas analyzers ANKAT-7631Mikro. Verification Method
IBJaL.413531.010 MP: Signaling device of combustible gases SGG-6M. Verification Method
IBJaL.413534.011 MP: Signaling devices of carbon monoxide СОУ1. Verification Method
MI 08-00: Theodolites. Method of verification
MI 1903-97: Recommendation. State system for ensuring uniformity of measurements. Standards for coating thickness. Method of verification
MI 1907-99: State system for ensuring uniformity of measurements. Optical reflectometers
MI 1929-2007: State system for ensuring the uniformity of measurements. \rVibration verification devices. Procedure of verification
MI 1974-2004: State system for ensuring uniformity of measurements. Turbine flow transducers. Method of verification
MI 2096-2009: Recommendation. State system for ensuring uniformity of measurements. Combustion calorimeters with a bomb (liquid). Method of verification
MI 2233-2000: Measurements efficiency provided upon technological processes control. General provisions.
MI 2240-98: National Measurement Standards. Analysis of Measurement, Inspection, and Testing Practicies at Businesses, Organizations, and Associations. Work Execution Technique and Procedures
MI 2284-94: Recommendation. State system for ensuring uniformity of measurements. Documentation verification laboratories
MI 2293-94: Metrological characteristics sampling technique for cold and hot water counters in Moscow
MI 2304-08: GSOEI. Metrological supervision carried out by the metrological services of legal entities. Main provisions
MI 2304-94: Metrological Monitoring and Supervision by Metrological Services of Juridical Persons
MI 2328-95: State system for ensuring uniformity of measurements. Formation of a list of objects (and their parameters) used in banking operations and subject to metrological control and supervision
MI 2334-2002: State system for ensuring uniformity of measurements. Certified mixtures. General development requirements
MI 2347-95: State system for ensuring uniformity of measurements. Avtotitrator "Radiometr". Method of verification
MI 2348-95: State system for ensuring uniformity of measurements. Analyzer СHN. Method of verification
MI 2349-95: State system for ensuring uniformity of measurements. pH meters types Сorning 130 (135), pH 100, pH 300, pH 500, pH 3000. Calibration method
MI 2350-95: State system for ensuring uniformity of measurements. Fluorometer EF-3 MA. Method of verification
MI 2353-95: State system for ensuring uniformity of measurements. Calorimeter gas automatic model 66. Calibration method
MI 2356-2001: State system for ensuring uniformity of measurements. Thermal converters with a unified output signal ТСМУ-055, ТСМУ-205, ТСПУ-055, ТСПУ-205, ТХАУ-205, ТХКУ-205. Method of verification
MI 2356-2006: State system for ensuring uniformity of measurements. Thermal converters with a unified output signal ТСМУ-055, ТСМУ-205, ТСПУ-055, ТСПУ-205, ТХАУ-205, ТХКУ-205. Method of verification
MI 2360-95: State system for ensuring uniformity of measurements. Analyzer X-ray fluorescent universal series of Spektro X-Lаb. Method of verification
MI 2366-96: Recommendation. State system for ensuring uniformity of measurements. Hydrometers of oil type UDVN. Verification Method
MI 2380-2001: State system for ensuring uniformity of measurements. Heat power controller TECON 10. Calibration method
MI 2381-96: State system for ensuring uniformity of measurements. Installation spectrometric gamma resonance IN-96. Method of verification
MI 2382-96: State system for ensuring uniformity of measurements. Gas analyzer "Cosa" (model 6000, 6000 CD and others). Method of verification
MI 2383-96: State system for ensuring uniformity of measurements. Analytical mobile set Spektro (ScopeTro X-TesT, SesTro-ProT). Method of verification
MI 2384-96: State system for ensuring uniformity of measurements. Fuel analyzer automatic "Fox" FTIR. Method of verification
MI 2387-97: State system for ensuring uniformity of measurements. X-ray spectrometers PW-1606 and PW-1410. Method of verification
MI 2388-97: State system for ensuring uniformity of measurements. Installations spectrographic for the analysis of metals. Method of verification
MI 2391-97: State system for ensuring uniformity of measurements. Flow viscometer of the firm "Sol-Trohn Caressers" (England). Method of verification
MI 2402-97: National Measurement Standards. Analytical Laboratory Gas Chomatographs. Verification Methods
MI 2403-95: Recommendation. State system for ensuring uniformity of measurements. Flow vibration density converters. On-site verification method
MI 2403-97: Recommendation. State system for ensuring uniformity of measurements. Density converters flow vibration Solartron types 7830, 7835 and 7840. Methods of calibration at the place of operation
MI 2406-97: State system for ensuring uniformity of measurements. Liquid flow in open channels of water supply and sewage systems. Measurement Technique Using Standard Weirs and Trays
MI 2408-97: Recommendation. State system for ensuring uniformity of measurements. The equipment of users of space navigation systems is geodesic. Method of verification
MI 2413-97: State system for ensuring uniformity of measurements. Measuring system for commercial metering of electricity based on the Metronika measuring and computing complex. Method of verification
MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products
MI 2419-97: Recommendation. State system for ensuring uniformity of measurements. Modular measuring converters. Verification Method
MI 2422-97: State system for ensuring uniformity of measurements. Gas analyzer in solid materials "Eltra ONH". Method of verification
MI 2423-97: State system for ensuring uniformity of measurements. Analyzer "Eltra CS". Method of verification
MI 2424-97: State system for ensuring uniformity of measurements. Emission spectrometer with inductively coupled plasma SresTrоFlame. Method of verification
MI 2425-97: State system for ensuring uniformity of measurements. Spectrometer optical emission SressToTest. Method of verification
MI 2426-97: State system for ensuring uniformity of measurements. Spectrometer emission SresTr-Lb. Method of verification
MI 2438-97: State system for ensuring uniform measurement. Measuring systems. Metrological assurance. Basic provisions.
MI 2448-98: Recommendation. State system for ensuring uniformity of measurements. Complex hardware and software for the automation of chromatographic analysis Multichrom. Method of periodic calibration
MI 2453-2000: GSE. Methods of radiation monitoring. General requirements
MI 2470-2000: State system for ensuring uniformity of measurements. Measuring converters 144, 244, 444, 644, 3144, 3244 MV to temperature sensors with a unified output signal from Fisher-Rosemount, USA. Method of periodic calibration
MI 2494-98: State system for ensuring uniformity of measurements. Analyzer rentgenofluorescent "Spestro Xepos". Method of verification
MI 2495-98: State system for ensuring uniformity of measurements. Spetstromass analyzer. Method of verification
MI 2496-98: State system for ensuring uniformity of measurements. Chromato-Mass Spectrometer QP-5000. Method of verification
MI 2497-98: State system for ensuring uniformity of measurements. Infrared spectrophotometer FTIR-8210PS. Method of verification
MI 2498-98: State system for ensuring uniformity of measurements. Atomic absorption spectrophotometer AA-6601F. Method of verification
MI 2499-98: State system for ensuring uniformity of measurements. Gas chromatograph GC-14A (GC-17A). Method of verification
MI 2500-98: National Measurement Standards. Basic Principles for Metrological Assurance for Small Businesses
MI 2501-98: Recommendation. State system for ensuring uniformity of measurements. Analyzers MSI 150 Compact. Method of verification
MI 2504-98: Recommendation. State system for ensuring uniformity of measurements. Fuel dispensers. Method of testing using the M2r-SS mermers
MI 2505-98: State system for ensuring uniformity of measurements. Optical power meters, optical radiation sources and small-sized optical testers in optical fiber transmission systems. Method of verification
MI 2520-99: State system for ensuring uniformity of measurements. Scales electromechanical heavy. Method of verification
MI 2521-99: State system for ensuring uniformity of measurements. Signaling devices of limiting values of NK by the firm Feedback, Hungary KFT, Hungary. Method of verification
MI 2522-99: Recommendation. State system for ensuring uniformity of measurements. Merniki of the 2nd category with a special scale of the type M2r-SSh. Method of verification
MI 2523-99: State system for ensuring uniformity of measurements. Electroencephalographs, electroencephaloscopes and electroencephalic analyzers. Method of verification
MI 2524-99: Recommendation. State system for ensuring uniformity of measurements. Rheographs, reopletizmografy, reoopreobrazovateli and reoanalyzers. Method of verification
MI 2526-99: State system for ensuring uniformity of measurements. Regulatory documents on methods of calibration of measuring instruments. Main provisions
MI 2538-99: State system for ensuring uniformity of measurements. Heat meters for water systems water supply COP ***. General metrological requirements
MI 2539-99: GSE. Measuring channels of controllers, measuring and computing, control, software and hardware systems. General requirements for methods of verification
MI 2557-99: State system for ensuring uniformity of measurements. A device for measuring the flash point of petroleum products in a closed crucible using the Pensky-Martens method ASTM D 93 Oillab 610. Calibration method
MI 2564-99: State system for ensuring uniformity of measurements. Calibration characteristics of gas stations and tank farms. Methods of determination and control using fuel dispensers during operation
MI 2567-2005: State system for ensuring uniformity of measurements. Manometric thermometers. Methods of calibration with the help of temperature calibrators ATC-R series and digital precision thermometer DTI-1000 of Ametek company Denmark A
MI 2573-2000: Recommendation. GSOEI. Heat meters for water heating systems. Method of verification. General provisions
MI 2579-2000: State system for ensuring uniformity of measurements. Tanks (tanks) of river and sea bulk vessels. Method of verification by the volumetric method
MI 2587-2005: Recommendation. State system for ensuring uniformity of measurements. Complex measuring and computing IMC-03. Method of verification
MI 2593-2000: Recommendation. State system for ensuring uniformity of measurements. Keys moment. Method of verification
MI 2595-2000: State system for ensuring uniformity of measurements. Capacity of storage tanks for petroleum products. The method of measurement using liquid counters and the compilation of calibration tables
MI 2596-2000: State system for ensuring uniformity of measurements. Pressure transducers measuring "EJA" manufactured by "Yokogawa Sourr-Tion", Japan. Method of verification
MI 2627-2000: State system for ensuring uniformity of measurements. Means of measuring the volume of gas. Counters, flow meters. Method of verification. General provisions
MI 2628-2000: Recommendation. State system for ensuring uniformity of measurements. Electromagnetic, ultrasonic, vortex and jet flowmeters for water heating systems. Method of verification. General provisions
MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices
MI 2640-2001: State system for ensuring uniformity of measurements. Mass (volume) amount of water consumed in circulating hot water supply systems for residential buildings. Measurement techniques. General provisions
MI 2643-2004: State system for ensuring uniformity of measurements. Hydrometers flow models L, M, F company "Phase Dynamic, Inc." (USA). Method of verification
MI 2651-2001: State system for ensuring uniformity of measurements. Gas chromatographs with a flame ionization detector for the analysis of ethyl alcohol and vodka. Method of verification
MI 2653-2005: State system for ensuring uniformity of measurements. Thermal converters resistance. Methods of calibration with the help of temperature calibrators series АТС-R and digital precision thermometer DTI-1000 of Ametek Denmark A
MI 2671-2005: State system for ensuring uniformity of measurements. Electronic thermometers. Methods of calibration with the help of temperature calibrators series АТС-R and digital precision thermometer DTI-1000 of Ametek Denmark A
MI 2672-2005: State system for ensuring uniformity of measurements. Temperature sensors with unified output. Method of calibration using temperature calibrators ATC-R series of execution "B" of Ametek Denmark A company
MI 2693-2001: Crude Oil Metering Oil Production Facilities
MI 2701-2001: Recommendation. State system for ensuring uniformity of measurements. Barographs meteorological aneroid. Method of verification
MI 2705-2001: State system for ensuring uniformity of measurements. Weather membrane barometers. Verification procedure
MI 2716-2002: Recommendation. State system for ensuring uniformity of measurements. Heat meters Multidata. Method of verification
MI 2717-2002: State system for ensuring uniformity of measurements. Counters of thermal energy STK Multita. Method of verification
MI 2731-2002: Recommendation. State system for ensuring uniformity of measurements. Oil flow rate of oil wells. Methods for performing measurements with the mass measurement installation of the type "ASMA"
MI 2735-2002: Recommendation. GSE. A lot of oil. Methods for measuring the system of measuring the quantity and quality of oil UUN NSP "Sergeevka" NGDU "Ufaneft"
MI 2773-2002: Procedure for metrological and technical support for start-up of oil quantity and attributes measurement systems
MI 2775-2002: Recommendation. State system for ensuring uniformity of measurements. The order of metrological and technical support of industrial operation of measurement systems of quantity and quality indicators of oil, pipe piston calibration units and measuring ins
MI 2781-2003: State system for ensuring uniformity of measurements. Thermographs meteorological with bimetallic sensitive element M-16. Method of verification
MI 2783-2003: Recommendation. State system for ensuring uniformity of measurements. Cloud height meters Verification Method
MI 2784-2003: State system for ensuring uniformity of measurements. Meteorological automated stations ASM-2000. Method of verification
MI 2785-2003: Recommendation. State system for ensuring uniformity of measurements. Full and static pressure receivers (pneumatic tubes). Method of verification
MI 2787-2003: Recommendation. GSE. Consumption and quantity of liquids and gases. Typical values of flow and quantity measurement results using measuring systems with restricting devices and measuring systems design results using MI 2677-2001
MI 2815-2003: State system for ensuring uniformity of measurements. The mass of goods transported by rail. The procedure for determining the maximum discrepancies in the results of mass measurements at destination stations and in transit.
MI 2816-2008: Recommendation. State system for ensuring uniformity of measurements. Density converters flow. On-site verification method
MI 2816-2011: Recommendation. State system for ensuring uniformity of measurements. Density converters flow. On-site verification method
MI 2826-2003: Recommendation. State system for ensuring uniformity of measurements. Liquid micromanometers with terminal measures of the PMKM and MKM type. Method of verification
MI 2834-2003: State system for ensuring uniformity of measurements. Water meters. Methods of calibration with the use of reference mernik
MI 2835-2008: State system for ensuring uniformity of measurements. Analyzers of ethanol vapor in the exhaled air. Method of verification
MI 2837-2003: Oil hand-over and acceptance points metrological and technical support
MI 2857-2004: GSE. Metrological support at the enterprises of the meat industry. Main provisions
MI 2868-2004: State system for ensuring uniformity of measurements. Compression meters showing. Method of verification
MI 2876-2004: Recommendation. State system for ensuring uniformity of measurements. Hygrometers and meteorological hygrographs. Method of verification
MI 2877-2004: Recommendation. State system for ensuring uniformity of measurements. Pneumatic anemometer type PO-30. Method of verification
MI 2889-2004: Recommendation. GSE. Platinum resistance thermocouples with unified TSPU output signal, models 65-244, 65-644, 65-3144, 65-3244. Method of verification
MI 2895-2004: Recommendation. GSE. Fuel dispensers. The method of periodic calibration. Merniki with special scales
MI 2917-2005: Recommendation. State system for ensuring uniformity of measurements. Pulse photometers type FI-1, FI-2, FI-3. Method of verification
MI 2933-2005: Recommendation. State system for ensuring uniformity of measurements. Devices for checking the belt tension. Method of verification
MI 2944-2005: State system for ensuring uniformity of measurements. Gas meters household. Method of on-site verification using a reference meter
MI 2950-2005: Recommendation. State system for ensuring uniformity of measurements. A lot of oil. Methods for performing measurements in horizontal tanks in the system of the main pipeline transport
MI 2952-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in railway tanks in the system of main pipeline transport
MI 2953-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in automobile tanks in the system of the main oil pipeline transport
MI 2956-2005: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic transducers of oil consumption with a nominal diameter of 400 mm and more. Method of verification
MI 2966-2005: State system for ensuring uniformity of measurements. Liquid glass thermometers. Methods of calibration with the help of temperature calibrators ATC-R series and digital precision thermometer DTI-1000 of Ametek Denmark A
MI 2967-2005: State system for ensuring uniformity of measurements. Thermoelectric converters. Methods of calibration with the help of temperature calibrators series ATS-R version B of the company Ametek Denmark A
MI 2971-2006: Recommendation. State system for ensuring uniformity of measurements. Technique and technology of works during calibration, calibration and adjustment of car scales using weighing car A-300
MI 2972-2006: State system of measuring uniformity provision. Petroleum mass. Method of measuring by the system of petroleum quantity and properties measuring system No.1005 JSC ´Shugurovskiy petrochemical plant´
MI 2974-2006: State system of measuring uniformity provision. Class 2 piston-pipe calibration rigs. Verification method for class 1 piston-pipe calibration rig with comparator
MI 2975-2006: State system of measuring uniformity provision. Petroleum mass. Indirect measuring method of dynamic measurements on the registration point pump station 'Suslovo' JSC 'Uraltransnefteproduct'
MI 2977-2006: Recommendation. State system for ensuring uniformity of measurements. Machines for balancing the wheels of cars and vans. General requirements for verification procedures
MI 2980-2006: State system of measuring uniformity provision. Sewage pollution analyzer 'Stok-101'. Verification method
MI 2983-2006: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic Flow Meters - Ultrasonic Meters UFM 500. Verification Methodology
MI 2986-2006: Recommendation. State system for ensuring uniformity of measurements. Scales for static weighing according to GOST 29329-92 with LEL up to 600 kg with the automated workplace of the verifier (ARMP) manufactured by OOO Mera, Moscow. Method of verification
MI 2987-2006: State system of measuring uniformity provision. Petroleum and oil products volume and mass. 'Altosonic V (VM)' ultrasonic counters uncertainty control method using comparison of two identical accuracy instruments
MI 2992-2006: Recommendation. State system for ensuring uniformity of measurements. Buried trench tanks with capacity from 5,000 to 10,000 m3. Method of verification by the volumetric method
MI 2994-2006: Recommendation. State system for ensuring uniformity of measurements. Systems for measuring the duration of the SIDS connections of the MSC switching subsystems and cellular mobile IN-platform platforms GSM 900/1800. Method of verification
MI 2995-2006: Raters of GSM 900/1800 cellular mobile radio telephones. Methods of verification
MI 2996-2006: State system of measuring uniformity provision. Digital and compact thermometers TCM 9410. Verification method
MI 3000-2006: GSOEI. Systems automated information-measuring commercial accounting of electric energy. Typical method of verification
MI 3001-2006: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters in-line models 7827 and 7829 from Solartron Mobrey Limited. Dynamic mode calibration technique
MI 3002-2006: Recommendation. State system for ensuring uniformity of measurements. Rules for sealing and marking of measuring instruments and equipment used in the composition of the systems for measuring the amount and indicators of oil quality and calibration facili
MI 3006-2006: Recommendation. State system for ensuring uniformity of measurements. Thickness gauges radioisotope coatings. Method of verification
MI 3020-2006: State system for ensuring uniformity of measurements. Tanks (tanks) steel horizontal cylindrical river bulk vessels (barges). Method of verification by the geometric method
MI 3021-2006: State system for ensuring uniformity of measurements. Natural gas consumption. Methods of measurement measurement systems with flow meters-meters RS-SPA-M
MI 3029-2007: State system for ensuring uniformity of measurements. Viscometers of the firm "Sol-Mon Money Limited". Method of verification
MI 3042-2007: State system for ensuring uniformity of measurements. Horizontal steel cylindrical tanks with elliptical and spherical bottoms for liquefied hydrocarbons with a capacity of 600 m3. Method of verification by the geometric method
MI 3043-07: Recommendation. State system for ensuring uniformity of measurements. Thermogravimetric infrared moisture meter MA-150. Method of verification
MI 3055-2007: Recommendation. State system for ensuring uniformity of measurements. Thickness gauges radioisotope for sheet and tape materials. Method of verification
MI 3067-2007: Recommendation. State system for ensuring uniformity of measurements. Microprocessor-based metering controllers and devices for measuring and controlling the temperature of production of LLC PO OVEN. Method of verification
MI 3081-2007: Systems of measurement of quantity and quality of oil, light petroleum products and liquid hydrocarbons. Maintenance and repair. Basics
MI 3082-2007: State system for ensuring uniformity of measurements. The choice of methods and means of measuring flow and the amount of consumed natural gas, depending on the operating conditions at metering stations Recommendations on the choice of working standards for their calibration
MI 3114-2008: State system for ensuring the uniformity of measurements. Automatic weighing instruments for weighing road vehicles in motion and determine the axial load on roadway. Methods of verification
MI 3115-2008: Recommendation. State system for ensuring uniformity of measurements. The mass of goods transported by rail. Measurement and accounting of the mass of the cargo in mutual settlements between the shipper and the consignee
MI 3119-2008: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Methods of calibration at the place of operation
MI 3121-2008: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Calibration method
MI 3138-2008: Portable flucometers. Method of verification
MI 3145-2008: State system for ensuring uniformity of measurements. Small-sized heavy-duty scales for static weighing. Method of calibration using standard scales
MI 3150-2008: Recommendation. State system for ensuring uniformity of measurements. Spectrocolorimeters. Method of verification
MI 3151-2008: GSE. Mass flow meters. Methods of verification at the site of operation of a piston-calibration calibration unit complete with a flow density converter
MI 3189-2009: State system for ensuring uniformity of measurements. Mass flow meters Micro Motion from "Emerson Process Management". Methods of calibration with a set of pipe piston calibration installation or compact prover and flow density converter
MI 3200-2009: Recommendation. GSE. Mass of crude oil. Methods of measuring the system of measuring the amount and parameters of crude oil at the temporary loading point of the Bayandy field at the Chamber of Commerce and Industry Usinskneftegaz OOO Lukoil-Komi
MI 3209-09: Recommendation. State system for ensuring uniformity of measurements. Installations testing truboporshnevy. Methods of verification using a calibration installation based on the reference mernik
MI 3212-2009: State system for ensuring uniformity of measurements. Consumption and quantity of natural gas. Measurement technique for determining the tightness of impulse lines of pines (pneumatic systems for measuring pressure drop and pressure) according to GOST 8.586. (1-5) -2005 measuring systems with restricting devices
MI 3213-2009: State system for ensuring uniformity of measurements. Consumption and volume of gas. Methods of measurement using ultrasonic flow transducers
MI 3240-2009: State system for ensuring uniformity of measurements. Fluid density converters flow. Method of verification
MI 3241-2009: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement technique indirect method of dynamic measurements
MI 3242-2009: State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Methods of measurement in horizontal tanks
MI 3261-2010: State system for ensuring the uniformity of measurements. Means of measuring the concentration of dissolved oxygen in water. Methods of verification
MI 3265-2010: State system for ensuring uniformity of measurements. Ultrasonic flow transducers. On-site verification method
MI 3266-2010: State system for ensuring uniformity of measurements. Converters volumetric flow reference. Method of verification
MI 3267-2010: State system for ensuring uniformity of measurements. Volume flow transducers. Method of calibration using a standard volume flow converter
MI 3272-2010: State system for ensuring uniformity of measurements. Mass flow meters. On-site verification method with a compact prover complete with a turbine flow transducer and in-line density transducer
MI 3275-2010: State system for ensuring uniformity of measurements. Metrological support for oil products account during transportation via main pipelines system. Main provisions
MI 3278-2010: State system for ensuring uniformity of measurements. Scales non-automatic action. The method of determining the boundary values of the geographical area of operation of the scales and the necessary amendments for their adjustment
MI 3280-2010: State system for ensuring uniformity of measurements. Pulse oximeters and pulse oximetry channels of medical monitors. Method of verification
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3302-2010: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Calibration method
MI 3311-2011: Recommendation. State system for ensuring uniformity of measurements. Complexes measuring and computing IMC-03. Method of verification
MI 3312-2011: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic flow transducers. Methods of calibration with a set of pipe piston calibration installation, in-line density converter and mass flow meters
MI 3322-2011: Recommendation. State system for ensuring uniformity of measurements. Electric meters of active and reactive energy. Methods of verification at the sites of operation using a set of portable calibration tools produced by Mars-Energo
MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil
MI 3380-2012: State system for ensuring uniformity of measurements. Volume flow transducers. Methods of verification on-site calibration equipment
MI 3442-14: State system for ensuring uniformity of measurements. The amount of oil produced in the Ostroluk field and the Ternovsky field of the West Lebedevsky license area of OAO NK Saratovneftegeofizika
MI 3532-2015: State system for ensuring the uniformity of measurements. Recommendations on definition of weight of oil at registration operations with application quantity measures and indicators of oil quality
MI 4212-012-2001: Recommendation. State system for ensuring uniformity of measurements. Sensors (measuring transducers) pressure type "METRAN". Verification Method
MI 524-2010: State system for ensuring uniformity of measurements. Shtangenzubomery with vernier SHZN-18, SHZN-40. Method of verification
MI BGEI 15-03: Light range finders. Methods and means of verification
MI BGEI 40-03: Reference bases. Method of verification
MI PrV-2015/1: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of sulfur dioxide in gases organized by IZA (photometric method)
MI PrV-2015/3: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of dust in gases organized by IZA
MI PrV-2017/1: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of resinous substances in gases organized by IZA (gravimetric method)
MIGK 43-05: Satellite geodetic equipment. Methods and means of verification
MP 001-06-2012: Micrometers MK, ML, MT, MZ. Verification Method
MP 242-0724-2008: State system for ensuring uniformity of measurements. Combustible gas sensors SGY. Verification Method
MP 242-0909-2009: State system for ensuring uniformity of measurements. Carbon monoxide alarms RGI CO0 L42. Verification Method
MP 242-0996-2010: State system for ensuring the uniformity of measurements. Systems measuring gas analytical Unipoint, Touchpoint 1, Touchpoint 4. Verification technique
MP 242-1012-2010: State system for ensuring the uniformity of measurements. Portable gas analyzers
MP 242-1096-2010: State system for ensuring the uniformity of measurements. Carbon monoxide detectors
MP 242-1102-2010: State system for ensuring uniformity of measurements. Signaling devices of gases of the RGY series complete with external sensors of the SGY series. Method of verification
MP 242-1183-2011: State system for ensuring uniformity of measurements. Signaling devices RGD CO0 MP1. Method of verification
MP 242-1354-2012: State system for ensuring uniformity of measurements. RGD CO0 MP1 alarms with an external SCAMET methane sensor. Verification Method
MP 242-1389-2012: State system for ensuring uniformity of measurements. RGI gas detectors with external SGA MET sensors
MP 242-1390-2012: State system for ensuring uniformity of measurements. Gas detectors RGD MET MP1 with an external methane sensor SGA MET. Method of verification
MP 242-1463-2012: Gas analyzers CHEMIST 400. Testing procedure
MP 242-1464-2012: Gas analyzers CASPER. Verification Method
MP 242-1594-2013: State system for ensuring uniformity of measurements. Signaling devices of combustible gases Beagle RGD. Verification Method
MP 242-1745-2014: State system for ensuring uniformity of measurements. Gas detectors SGY, SGW. Verification Method
MP 61-224-2006: State system for ensuring uniformity of measurements. Laboratory spectrophotometers DR-2800, DR-4800, DR-5000. Verification Method
MUK 4.1.1481-03: Determination of the mass concentration of iodine in food products, food raw materials, food and dietary supplements by the voltammetric method
Order 1/12-NPA: On approval of the Regulations on the procedure for attestation of measurement standards of units of quantities in the field of atomic energy use (invalidated from 05/11/2021 on the basis of the order of the State Atomic Energy Corporation Rosatom No. 1/17-NPA dated 21.12.2020)
Order 1815: The procedure for verification of measuring instruments, requirements for the verification mark and the content of the verification certificate
OST 45.143-99: Sectoral uniformity measurement system. Guidelines for calibration of telecommunication measurement instruments. The order of development. Requirements for the construction, presentation, design and content
OST 45.191-2002: Average power meters of optical radiation for fiber-optic transmission systems. Technical requirements. Test methods
OST 45.192-2002: Measuring radiation sources for fiber-optic transmission systems. Technical requirements. Test methods
OST 68-8.01-97: Organization and procedure of metrological assurance works regarding topographic-geodesic and cartographic production.
OST 68-8.02-97: Organization and procedure of metrological control and supervision in Russian cartography system.
OST 95 10571-2002: Measurement system for the purpose of accounting and control of nuclear materials. Main provisions
P SSFZhT 46-2001: The certification system for the federal railway transport. The order of development and certification of certification tests of railway equipment.
PB 09-297-99: Rules of setup and safe operation of compressor units with piston compressors operating on dangerously explosive and noxious gases
PND F 13.2:3.37-03: Method for the quantitative chemical analysis of atmospheric air and working area air for the content of vinyl chloride by gas chromatography
PNST 161-2016: Mining equipment. Multipurpose safety systems and automated control systems for technological processes in the mine. Requirements for metrological providing and test methods
PR 50.2.014-96: Metrological Regulations. National System for Standardization of Measurements. Accreditation of Metrological Services of Juridical Persons for Verification of Measuring Devices
PR 50.2.015-94: State system for ensuring uniformity of measurements. The procedure for determining the cost (price) of metrological works
PR 50.2.019-2006: The state system of measurements. Methods of measurement using the turbine, rotary and vortex meters
PR 50.2.022-99: National system for uniformity of measurements of the Kyrgyz Republic. The procedure of state control and supervision over the use and condition of measurement kits with restrictive flow orifice devices.
PR 51-00159093-011-2000: Automatic process control system in gas industry. Metrological assurance. General provisions.
R 50.2.012-2001: National System for Standardization of Measurements. Thermal Imaging Devices. Verification Methods
R 50.2.013-2001: State system for ensuring uniformity of measurements. Means of measuring the characteristics of optical radiation tanning beds. Method of verification
R 50.2.014-2001: State system for ensuring uniformity of measurements. Means of measuring the characteristics of ultraviolet radiation during process control in inspection, printing and photolithography. Method of verification
R 50.2.015-2001: State system for ensuring uniformity of measurements. Means of measuring the characteristics of ultraviolet radiation from medical sources. Method of verification
R 50.2.016-2001: National System for Standardization of Measurements. Means for Measurements of Specular Reflection Factor and Diffuse Reflection Factor in the Vacuum Ultraviolet Waveband. Verification Procedure
R 50.2.017-2001: State system for ensuring uniformity of measurements. Means of measurement of illumination and ultraviolet radiation doses in photobiology and crop production. Method of verification
R 50.2.018-2001: State system for ensuring uniformity of measurements. Means of measuring the characteristics of ultraviolet radiation bactericidal irradiators. Method of verification
R 50.2.019-2001: National System for Standardization of Measurements. Instruments for Measuring the Speed of Sound in Aqueous Media. Verification and Calibration Methods
R 50.2.020-2002: State system for ensuring uniformity of measurements. Sphygmomanometers non-invasive mechanical. Method of verification
R 50.2.022-2002: State system for ensuring uniformity of measurements. Aspiration counters of light ions. Method of verification
R 50.2.025-2002: State system for ensuring uniformity of measurements. Laser dosimeters. Method of verification
R 50.2.030-2003: National Measurement Standards. Area of Application of Standard Specimens of the Composition and Properties of Substances and Materials Under the Jurisdiction of Government Metrological Monitoring and Inspection
R 50.2.032-2004: State system for ensuring uniformity of measurements. Non-invasive blood pressure gauges. Method of verification
R 50.2.034-2004: National Measurement Standards. Ion-Selective Electrodes for the Determination of Ion Activity (Concentration) in Aqueous Solutions. Verification Methods
R 50.2.036-2004: National Measurement Standards. pH Meters and Ion Meters. Verification Methods
R 50.2.041-2004: State system for ensuring uniformity of measurements. Areometers glass. Method of verification
R 50.2.042-2004: State system for ensuring uniformity of measurements. Dielectric moisture meters of grain and its products. Method of verification
R 50.2.045-2005: State system for ensuring the uniformity of measurements. Analysers of oxigen dissolved in water. Methods of verification
R 50.2.046-2005: State system for ensuring uniformity of measurements. Capillary glass viscometers imported. Method of verification
R 50.2.047-2005: State system for ensuring uniformity of measurements. Aerosol particle counters. Method of verification
R 50.2.048-2005: State system for ensuring uniformity of measurements. Means of measuring flash point in an open crucible. Method of verification
R 50.2.049-2005: State system for ensuring uniformity of measurements. Medical monitors. Method of verification
R 50.2.061-2008: General criteria for the competence of certified reference material producers
R 50.2.064-2009: State system for ensuring the uniformity of measurements. Spectrophotometrs for medical laboratories. Methods for verification
R 50.2.065-2009: State system for ensuring the uniformity of measurements. Opacimeter. Methods for verification
R 50.2.066-2009: State system for ensuring uniformity of measurements. Immunoassay analyzers. Method of verification
R 50.2.069-2009: State systems for ensuring the uniformity of measurements. Optical spectrum analyzers in fibre optical transmission systems. Verifacation procedure
R 50.2.070-2009: State systems for ensuring the uniformity of measurements. Attenuators in fibre optical transmission systems. Verifacation procedure
R 50.2.071-2009: State systems for ensuring the measurements. Optical reflectometers. Verifacation procedure
R 50.2.083-2013: State system for ensuring the uniformity of measurements. Chromatic dispersion measurement means for fiber. optical waveguides. Verification methods
R 50.2.084-2013: State systems for ensuring the uniformity of measurements. Working standards unit average optical power in fiber-optic transmission systems. Methods of verification
R 50.2.085-2013: State systems for ensuring the uniformity of measurements. Measuring instruments of dynamic characteristics of radiation in fibre-optical transmission systems. Verifacation procedure
R 50.2.086-2013: Polarization mode dispersion measurement means for fiber-optical waveguides. Verification methods
R 50.2.087-2013: State systems for ensuring the uniformity of measurements. Electroencephalographs, electroencephalscopes and electroencephalanalyzers. Verifacation procedure
R 50.2.091-2013: State systems for ensuring the uniformity of measurements. Spyrometers, spyrographs and spyroanalyzers. Methods of verification
R 50.2.092-2013: State systems for ensuring the uniformity of measurements. Glucometers portable. Verifacation procedure
R 50.2.093-2013: State systems for ensuring the uniformity of measurements. Automatic biochemical analysers. Verification procedure
R 50.2.097-2015: State system for ensuring the uniformity of measurements. Assessment of the state of activity measurement, calibration and testing laboratories to meet accreditation criteria in the area of traceability
R 52.24.309-2004: Organizing and secure monitoring of surface water pollution on Federal Hydrometereology and Environmental Monitoring Service web
RD 03-31-95: Methods of organization and conducting inspection of metrological support of manufacturing at enterprises.
RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes
RD 153-00.0-006-99: Sectoral system for ensuring the uniformity of measurements in the fuel and energy complex. Metrological control and supervision in the fuel and energy complex
RD 153-34.0-11.117-2001: Information and measurement systems. Metrological support. General provisions.
RD 153-34.1-35.127-2002: General technical requirements for program and technical complex for technological process automated control system of thermal power plant
RD 153-39.4-001-96: Rules of Delivery of Oil Products To Oil Storage Tanks, Petrol Stations and Warehouses of Combustibles and Lubricants Through the Branches of the Main Oil Product Pipelines
RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.
RD 153-39-011-97: Instruction on accounting of oil products on trunk oil-products pipelines.
RD 153-39TN-009-96: Ordinance on the System for Maintenance and Repair of Electrical Installations of Trunk Petroleum Pipelines Part I
RD 22-28-36-01: Lifting cranes. Typical program and test procedure. Standard testing programs and procedures.
RD 34.11.113-95: Procedural Guidelines. Metrological Monitoring and Inspection by Main and Base Metrological Services at Electric Power Facilities
RD 34.11.412-96: Methodical instructions. Calibration of measuring instruments at electric power enterprises. Organization and procedure
RD 45.002-96: The leading document of branch. The guideline on establishment of the measuring instrument nomenclature which are subject to checking.
RD 45.006-99: Sectoral uniformity measurement system. Organization and procedure for calibration of measuring instruments in the communications industry
RD 45.007-97: Time-based telephone call accounting systems. Metrological provision. Main provisions
RD 45.008-97: The program and test methods are typical for the purpose of approving the type of time-based telephone connection metering equipment (APUS) of local telephone communications
RD 45.009-99: Systems of broadcasting, television broadcasting. Specialized measuring instruments. Guidelines for the calibration of the TV measuring equipment TMZ81 and the video analyzer computer VK-1
RD 45.010-99: Mobile communications systems. Specialized measuring instruments. Methodical instructions for calibration of radio measuring complexes of types 2955/2955В, 2965А/2966А, 2945А/2946А and 2948 of the firm Mаni Instruments
RD 45.011-99: Satellite and radio relay communication systems. Specialized measuring instruments. Guidelines for checking the error analyzer and jitter SF-60 and analyzer digital microwave systems ME 4510V
RD 45.013-98: Guidance on the assignment of measurement and control instruments to the category of indicators
RD 45.023-98: Telecommunication Measurement Instruments. Methodical instructions for calibrating a digital signal analyzer of the Interceptor 147 type, an PCM-30 analyzer of the K4304 type, a PCM-1 type telephone channel meter Collection № 1. Methodological guidelines
RD 52.08.758-2011: Hydrostatic Level Meter DST-22. Method of verification
RD 52.08.814-2014: PS-LIGHT-II bubbling level gauges from automated hydrological complexes. Method of verification
RD 52.10.728-2010: Basic requirements for the competence of laboratories in monitoring the status and pollution of sea water. State Oceanographic Institute (GOIN)
RD 52.18.761-2012: Means of measurements of hydrometeorological purposes network. NGO "Typhoon"
RD 52.18.786-2013: The basic territorial subsystem of radiation monitoring of Roshydromet. Ensuring uniformity of measurements. Main provisions
RD 52.24.309-2011: Organization and conduct of regime monitoring of the state and pollution of surface land waters
RD 52.24.508-96: Guidelines. Organization and functioning of the subsystem for monitoring the state of transboundary surface land waters
RD EO 1.1.2.29.0430-2011: The procedure for attracting contracting organizations to work on monitoring the state of metal equipment and pipelines of nuclear power plants
RDT 06-2011: General requirements for the competence of laboratories (centers) performing measurements for the purpose of monitoring the environment and its pollution
Resolution 325: On the abolition of the Rules on Metrology
Resolution 325: On the abolition of the Rules on Metrology
RMG 133-2013: State system for ensuring the uniformity of measurements. The automated data-measuring systems for the commercial metering of electric power. Model verification procedure
RMG 51-2002: State system for ensuring the uniformity of measurements. Documentats for verification methods of measuring instruments. Basic statements
RMG 89-2010: State system for ensuring the uniformity of measurements. Acceptance point of oil. Metrological and technical assurance
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
RT 02-2008: Organization of verification of measuring instruments and the procedure for developing documents on verification methods
RTM 68-8.22-95: Procedure for accounting and storage of measuring means at Roskartography enterprises
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 1. Television
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 2. Broadcasting
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 3. General safety requirements
SanPiN 2.2.4.1329-03: Requirements for Protection of Personnel Against the Effect of Pulsed Electromagnetic Fields
SO 153-34.09.102: Rules for heat energy and heat carrier metering
SO 34.26.720: Methodical instructions on testing of boilers to identify the causes of external corrosion damage of low-temperature heating surfaces (air heaters and economizers)
SO 34.26.723: Methodical instructions for testing of direct-flow boilers in unloading modes at sliding medium pressure
SO 34.26.725: Methodological guidelines for testing economizers of stationary steam boilers
ST SSFZhT TM-TsP 115-2001: Broad gauge railway rails. Typical method for determining the performance of wide gauge rail rails.
ST SSFZhT TsE 136-2002: Telemechanics equipment traction substations. Typical certification test methods
ST SSFZhT TsL-TsT 146-2003: Cast wheel centers for rolling stock of 1520 mm gauge railways. Typical methods of control of the macrostructure
ST SSFZhT TsL-TsT 147-2003: Cast wheel centers for rolling stock of 1520 mm gauge railways. Typical method of controlling the microstructure
ST SSFZhT TsT 049-99: Transmission hydraulic for diesel locomotives and diesel trains. Typical test method
ST SSFZhT TsUO 082-2000: Rolling stock and special railway rolling stock fire detection and fire extinguishing sys-tems. Standard test methods
ST TsKBA 029-2006: Pipe fittings. Methods of experimental determination of hydraulic and cavitation characteristics
ST TsKBA 080-2009: Pipe fittings. Methods of testing for seismic resistance
ST TsKBA 080-2015: Pipe fittings. Methods of testing for seismic resistance
ST TsKBA 106-2011: Pipe fittings. Oxidation of titanium alloy parts
STO 1.1.1.07.001.0675-2008: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.