SNiP 23-02-2003
СНиП 23-02-2003
|
|
Buildings Heat Insulation
Тепловая защита зданий
Status: The document is not up to date. Updated version of SP 50.13330.2012 Thermal protection of buildings
The rules and regulations apply to thermal protection of residential, public, industrial, agricultural and storage buildings and structures, in which it is necessary to maintain a certain temperature and humidity of the internal air. The standards do not apply to thermal protection: residential and public buildings heated periodically (less than 5 days a week) or seasonally (continuously less than three months a year); temporary buildings in operation no more than two heating seasons; greenhouses, greenhouses and refrigerator buildings. The level of thermal protection of these buildings is established by the relevant standards, and in their absence, by the decision of the owner (customer), while observing sanitary and hygienic standards. The rules for the construction and reconstruction of existing buildings of architectural and historical significance are applied in each particular case, taking into account their historical value on the basis of decisions of the authorities and coordination with state control bodies in the field of protection of historical and cultural monuments.
Нормы и правила распространяются на тепловую защиту жилых, общественных, производственных, сельскохозяйственных и складских зданий и сооружений, в которых необходимо поддерживать определенную температуру и влажность внутреннего воздуха. Нормы не распространяются на тепловую защиту: жилых и общественных зданий, отапливаемых периодически (менее 5 дней в неделю) или сезонно (непрерывно менее трех месяцев в году); временных зданий, находящихся в эксплуатации не более двух отопительных сезонов; теплиц, парников и зданий холодильников. Уровень тепловой защиты указанных зданий устанавливается соответствующими нормами, а при их отсутствии - по решению собственника (заказчика) при соблюдении санитарно-гигиенических норм. Нормы при строительстве и реконструкции существующих зданий, имеющих архитектурно-историческое значение, применяются в каждом конкретном случае с учетом их исторической ценности на основании решений органов власти и согласования с органами государственного контроля в области охраны памятников истории и культуры.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
6/26/2003
SKU: RUSS17299
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
4. Security of capital construction objects »
4.1. Federal State Construction Supervision »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
3 Workspace air »
3.2 Improvement of air environment and normalization of microclimate parameters »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
The Document References:
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission
GOST 26629-85: Buildings and structures. Method of thermovision control of enclosing structures of thermal insulation quality
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 31166-2003: Building and structure envelopes. Method for calorimetric determination of the heat transfer coefficient
GOST 31167-2003: Buildings and structures. Methods for determination of air permeability of building envelope in field conditions
GOST 31168-2003: Houses. Method for determination of specific heat consumption for building heating
SanPiN 2.1.2.1002-00: Sanitation and Disease Control Requirements for Residential Occupancies and Spaces
SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate
SNiP 2.10.03-84: Cattle-breeding poultry and fur-farming buildings and premises
SNiP 2.11.02-87: Refrigerators
SNiP 31-05-2003: Public office buildings
SNiP 41-01-2003: Heating, Ventilation and Air Conditioning (HVAC)
The Document is Referenced By:
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 31166-2003: Building and structure envelopes. Method for calorimetric determination of the heat transfer coefficient
GOST 31167-2003: Buildings and structures. Methods for determination of air permeability of building envelope in field conditions
GOST 31167-2009: Buildings and structures. Methods for determination of air permeability of building envelopes in field conditions
GOST 31168-2003: Houses. Method for determination of specific heat consumption for building heating
GOST 31309-2005: Building heat-insulating mineral fibers materials. General specifications
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 32494-2021: Buildings and structures. The method of mathematical modeling of the temperature-humidity regime of enclosing structures
GOST 34914-2022: Windows for industrial buildings. General technical conditions
GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements
GOST R 54167-2010: Glass and glass products. Determination of energy balance value. Calculation method
GOST R 54850-2011: Roof windows and skylights. Method for determination of reduced of thermal resistance
GOST R 54851-2011: Building envelope in similar. Calculation reduced total thermal resistances
GOST R 54853-2011: Bulidings and structures. Method for determination of thermal resistance and thermal coefficient of enclosing structures with assistance of heat flow meter
GOST R 54857-2011: Buildings and structures. Determination of air change of rooms method of indicator gas
GOST R 54858-2011: Translucent facade construction. Method for determination of thermal transmission resistance
GOST R 54861-2011: Windows and external doors. Methods for determination of thermal transmission resistance
GOST R 54865-2011: Heat supply of buildings. Method for calculation of energy requirements and efficiencies for of heat generation with heat pump systems
GOST R 54928-2012: Pedestrian bridges for polymer composites. Specifications
GOST R 59985-2022: Building envelope structures. Methods for determining the thermal performance of insulating materials and products under operating conditions
GOST R 70266-2022: Transparent enclosing structures. Sealing of joints to load-bearing structures and wall openings. Rules and control of work performance
GOST R 70346-2022: "Green" standards. Multifamily residential "green" buildings. Evaluation methodology and criteria for design, construction and operation
GOST R 70389-2022: Heat supply schemes of cities. Development and updating processes. Technical conditions for procurement
Manual for MR 23-345-2008: Standards of the energy passport and the section "Energy Efficiency" for residential, public and mixed buildings (manual to MP 23-345-2008)
MDS 11-20.2009: Methodics of precision noncontact executive survey of hinged facade systems with air gaps in the construction of tall buildings
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-54.2010: Guidelines for use in roofs and waterproofing of polymer materials
MDS 23-1.2007: Guidelines for a comprehensive heat engineering survey of external enclosing structures using thermal imaging technology
MDS 31-12.2007: The floors of residential, public and industrial buildings using materials from the company "Henkel Bautechnik." Materials for design and working drawings of nodes
MDS 35-11.2004: Development of environment for work activity of low-mobile groups of people at industrial enterprises
MDS 55-1.2005: Walls with insulation from expanded polystyrene and mineral wool boards with a finishing layer of thin-layer plaster. Materials for design and working drawings of nodes
MDS 81-39.2005: Individual elemental estimate of the consumption rate of materials and labor costs for the finishing of the premises with KNAUF complete systems. Standard flow charts for finishing works using KNAUF complete systems. Volume 1. Individual elemental estimat
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MR 23-345-2008 UR: Guidelines for the design of thermal protection of residential and public buildings
NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry
NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry
ODM 218.2.061-2015: Recommendations for determining the thermophysical properties of road-building materials and soils
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.
RD-APK 1.10.01.02-10: Guidelines for technological design of farms and cattle complexes
RD-APK 1.10.01.03-12: Guidelines for the technological design of farms and cattle farms (farms)
RD-APK 1.10.02.04-12: Guidelines for technological design of pig farms and complexes
RD-APK 1.10.08.01-10: Guidelines for technological design of beekeeping objects
RD-APK 3.10.01.07-08: Methodical recommendations on heat engineering calculation of the floors in the places of animals' rests with the use of litter-free content
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 1062-PP: Energy efficiency of residential and public buildings. Standards for energy consumption and thermal protection
RMD 11-08-2009 SPb: Guidelines for preparation of capital construction projects in St. Petersburg City
RMD 11-08-2009 St. Petersburg: Guide to the design preparation of capital construction in St. Petersburg
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 31-03-2008 Sankt-Peterburg: Recommendations for the design of buildings of hotel enterprises, motels and campgrounds in St. Petersburg
RMD 31-10-2011 Sankt-Peterburg: Guidelines for the design of pre-school educational institutions (including classes with compensatory education)
RMD 31-15-2012 Sankt-Peterburg: Design Guide for Special (Corrective) Educational Institutions for Students and Pupils with Disabilities
RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG
RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
RMD 52-02-2007 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part II
RMD 56-05-2008 Sankt-Peterburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing
R-SSK 03-2016: Recommendations. Assessment of energy efficiency of buildings. Calculation and experimental control of standardized energy performance of buildings
SNiP 31-01-2003: Multicompartment residential buildings
SNiP 31-02-2001: Residental single-family houses
SNiP 31-05-2003: Public office buildings
SNiP 31-06-2009: Public buildings and constructions
SNiP 41-01-2003: Heating, Ventilation and Air Conditioning (HVAC)
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SO 002-02495342-2005: Roofs of buildings and structures. Design and construction. Standard of organization
SP 117.13330.2011: Public office buildings
SP 118.13330.2011: Public buildings and works
SP 17.13330.2011: Roofs
SP 230.1325800.2015: Construction enclosing of buildings characteristics of thermal conductive of inclusions
SP 23-101-2004: Design of thermal protection of buildings
SP 23-102-2003: Natural lighting of residential and public buildings
SP 29.13330.2011: Floors
SP 35-114-2003: Reconstruction and adaptation of buildings for social service agencies aimed at older people
SP 52-104-2006: Steel fibre reineorced concrete structures
SP 52-105-2009: Reinforced concrete structures in cold climates and on permafrost soils. (In the development of SNiP 52-01-2003 and SNiP 2.02.04-88)
SP 55.13330.2011: Sindle-family houses
SP 55-103-2004: Structures made with the gypsum partition plates
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
TR 12274-TI.2004: Thermal insulation products "Isover" of the grades KK-ALS, KT-11-TWIN, KIM-AL, KVM-50, KLS-K in the designs of thermal insulation of equipment and pipelines. Recommendations for use with technical solutions album
TR 12279-TI.2004: Thermal insulation products "Thermo" in enclosing structures of buildings and structures. Recommendations for use with technical solutions album
TR 149/1-05: Technical recommendations on the technology of the use of a complex of finishing materials in the reconstruction and overhaul of the internal surfaces of buildings
TR 149/2-05: Technical recommendations on the technology of using a complex of finishing materials for major repairs, rehabilitation and reconstruction of building facades
TR 161-05: Technical recommendations on the design, installation and operation of hinged facade systems
TR 196-08: Technical recommendations on the technology of sealing and sealing joints of exterior wall panels
TR 199-08: Technical recommendations for improving the thermal and operational performance of wooden window blocks
TR SPI 03-2009: Exterior wall panels with an INSI thermoprofile frame with external “Aquapanel” exterior-facing cement and mineral slabs for low-rise buildings for various purposes. Materials for design and working drawings of nodes
TSN 13-302-2004: Repair and technical re-equipment of residential buildings of the first mass series in St. Petersburg
TSN 20-303-2006: Protection of building structures, buildings and structures from aggressive chemical and biological environmental influences. St. Petersburg
TSN 23-310-2016 BelO: Energy efficiency in residential and public buildings. Design and control standards
TSN 23-349-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Samara Region
TSN 23-350-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Vologodskaya Oblast
TSN 23-355-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Kirov region
TSN 30-311-2004: Urban planning. Planning and development of urban and rural settlements of the Yamalo-Nenets Autonomous Okrug
TSN 31-328-2004: Secondary schools. The Republic of Sakha (Yakutia)
TSN 31-329-2004: Retailers. Design Standards. Ivanovo region
TSN 31-330-2005: Treatment and prevention institutions in St. Petersburg
TSN 31-332-2006: Residential and public high-rise buildings
TSN 41-306-2003: Thermal Insulation of Pipelines for Various Purposes. City of Moscow
TSN 41-310-2004: Apartment heating systems from gas-fired heat generators. Kursk region
TSN 41-312-2004 MO: Individual apartment heating system based on double-circuit gas boilers with a closed combustion chamber
TU 5831-001-54735376-2004: Specifications. Three-layer reinforced concrete panels with flexible fiberglass connections for exterior walls of Styrod system buildings
TU 67-18-165-93: Sandwich panels are three-layer heat insulating. Three-layer wall frameless panels with polyurethane foam insulation and metal cladding. Technical information
|
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
