GOST 12815-80

ГОСТ 12815-80

Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

Фланцы арматуры, соединительных частей и трубопроводов на Ру от 0,1 до 20,0 МПа (от 1 до 200 кгс/см кв.). Типы. Присоединительные размеры и размеры уплотнительных поверхностей

Status: Not effective - Canceled in the Russian Federation. Registration information 99-st dated 03/01/2016 (official website of Rosstandart); (IUS 6-2016)

The standard applies to the flanges of pipelines and connecting parts, as well as to the connecting flanges of valves, machines, instruments, nozzles of apparatuses and tanks for a nominal pressure Py from 0.1 to 20.0 MPa

Стандарт распространяется на фланцы трубопроводов и соединительных частей, а также на присоединительные фланцы арматуры, машин, приборов, патрубков аппаратов и резервуаров на условное давление Py от 0,1 до 20,0 МПа (от 1 до 200 кгс/см кв.) и температуру среды от 20 до 873 К (от минус 253 до 600 °С) и на фланцы с прокладками из фторопласта-4 на условное давление Py от 0,1 до 20,0 МПа (от 1 до 200 кгс/см кв.) и температуру среды от 73 до 473 К (от минус 200 до плюс 200 °С) и может быть использован для их сертификации. Стандарт не распространяется на фланцы трубопроводов транспортных машин, если эти фланцы не предназначены для присоединения арматуры или приборов общего назначения, а также фланцы, стандартизованные ГОСТ 1536-76 и ГОСТ 4433-76.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 22

Approved: USSR State Committee for Standards, 5/20/1980

SKU: RUSS17303

Price: $140.58




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Standards for pipe fittings (TPA) » 13. Standards for basic components and parts of injection molding machines » 13.1 Flanges »

Standards for pipe fittings (TPA) » 6. Standards of connecting sizes of piping valves (TPA) » 6.2 Weld connection »

Standards for pipe fittings (TPA) » 6. Standards of connecting sizes of piping valves (TPA) » 6.1 Flange connection »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G18 Fittings and pipeline connections »


The Document is Replaced With:

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

As a Replacement Of:

GOST 1233-67: Flanges of fittings, connecting parts and pipelines. Types

GOST 1234-67: Flanges of fittings, connecting parts and pipelines. Connecting dimensions

The Document References:

GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions

GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions

GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions

GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions

GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions

GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions

GOST 14140-81: Basic norms of interchangeability. Position tolerances of bore axes for fasteners

GOST 14792-80: Parts and work pieces made by oxygen and plasma arc cutting. Cut face accuracy and quality

GOST 1536-76: Flanges for ship's pipeline systems. Coupling dimensions and sealing surfaces

GOST 2590-88: Round steel bars. Dimensions

GOST 2591-88: Square Hot-rolled Steel Bars Dimensions

GOST 26349-84: Tube connections and fittings. Nominal pressures. Series

GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.

GOST 28338-89: Nominal bores (nominal sizes)

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 4433-76: Flanges of valves connecting pieces and pipelines for shipping systems. Types

GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps

The Document is Referenced By:

ATK 24.200.02-90: Album typical designs. Flanged steel plugs. Design, dimensions and specifications

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

ATK 26-18-10-94: Devices for Installation of Temperature Measuring Devices for Use at Nominal Pressure from 0.6 to 16.0 MPa. Plugs. General Technical Requirements

ATK 26-18-12-96: Threaded flanges for installation of thermometers, manometers and other measuring devices for corrosive media on Ru from 4.0 to 16.0 MPa. Design and dimensions

ATK 26-18-13-96: Flanges for reinforcing connecting parts and pipelines for corrosive environments on Ru from 0.6 to 16.0 MPa. Design, dimensions and general technical requirements

GOST 10042-75: The wedge gate valves with non-sliding spindle are flanged cast iron on Rd approximately equal to 0.25 MPa (2.5 kgf / cm2). Specification

GOST 10718-81: Hydrocyclones. Specification

GOST 10738-76: The wedge gate valves with sliding spindle steel on Pd approximately 2.5 MPa (25 kgf / cm2). Specification

GOST 11379-80: Dynamic Pumps for waste liquids. General specifications

GOST 11823-91: Check valves for stipulated pressure of pn < 25 MPa (250 kgf/sm2)

GOST 12018-82: Pneumatic screw pumps for cement. General specifications

GOST 12532-88: Direct-acting safety valves. Main parameters

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions

GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions

GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions

GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions

GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions

GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 13252-73: Check valves reversible rotary, made of steel for design pressure Pd 16 MPa (160 kgf / cm2) Technical requirements

GOST 13252-91: Swing check valves for Pnom £25 MPa (250 kgf/cm2). General specifications

GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)

GOST 14187-84: Plug valves. Overroll dimensions

GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions

GOST 1536-76: Flanges for ship's pipeline systems. Coupling dimensions and sealing surfaces

GOST 15616-84: Pneumatic screw pumps for cement. General specifications

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 16324-83: Cast iron diaphragm control valves with pneumatic diaphragm actuator

GOST 16587-71: Safety valves, control valves and pressure regulators. Face-to-face lengths

GOST 17437-81: Air filters - moisture separators

GOST 17584-72: Cast iron joining rings and fittings for asbestos cement pressure pipes

GOST 18162-72: Shut-off valves made of malleable iron for Pd approximately 1.6 MPa (16 kgf / cm2). Specification

GOST 18194-79: Installations for oil and oil products bottom loading unloading from railway tank cars. Technical specifications

GOST 18580-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 4 MPa (40 kgf / cm2). Specification

GOST 18581-73: Check valves reverse flanged from corrosion-resistant steel to PN 4 MPa (40 kgf / cm2). Specification

GOST 18584-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 16 MPa (160 kgf / cm2). Specification

GOST 18722-73: Shut-off sleeve valves made of malleable iron for Pd approximately 1.6 MPa (16 kgf / cm2). Specification

GOST 20572-83: Two-screw pumps and pump units. Specification

GOST 20772-81: Connecting devices for technical means for fuelling, pumping, loading-unloading, transport and storage of raw oil and petroleum products. Types, basic parameters and sizes. General technical requirements

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)

GOST 21725-83: Direct-acting temperature regulators for air conditioners and closers. General specifications

GOST 22247-96: Centrifugal and section pumps for handling water. Basic parameters and dimensions. Safety requirements. Control methods

GOST 23230-78: Shut-off valves made of steel for Pd are approximately 16.0 MPa (160 kgf / cm2). Specification

GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 26227-84: Level gauges and sensors of the level of industrial application of GSP. General specifications

GOST 26969-86: Standard orifice plates for flow meters. Specifications

GOST 28066-89: Ssi liquid chamber meters

GOST 28124-89: Flowmeters, vortex, GSP. Technical requirements and test methods

GOST 28923-91: Temperature regulators working without extraneous source of energy

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31856-2012: Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners. General technical requirements and test methods

GOST 32028-2012: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods

GOST 32029-2012: Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods

GOST 32032-2013: Taps for gas burning appliances. General technical requirements and test methods

GOST 32388-2013: Process piping. Standard for the stress, vibration and seismic analysis

GOST 32445-2013: Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products. The general technical requirements and test methods

GOST 32661-2014: Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications

GOST 33009.1-2014: Gas boilers of central heating. Part 1. Specifications and test methods.

GOST 33011-2014: Gas boilers of central heating. Boilers type c with a nominal heat output of more than 70 kW but not more than 1000 kW. Classification, requirements, test methods and labeling

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 3326-86: Stop valves, check lift and swing valves. Overall dimensions

GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST 4623-80: Equipment for vertical and horizontal for petroleum products. The mechanism of control of the cracker (upper). Specification

GOST 4624-70: Equipment for horizontal tanks for petroleum products. Ventilating tip

GOST 5005-82: Electric-welded cold-worked steel pipes for cardan shafts

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5761-74: Valves for nominal pressure

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications

GOST 9789-75: Safety spring full-lifted flanged steel valves for p stip "1.6 and 4.0 MPa (16 and 40 kgf/cm2)

GOST R 50392-92: Fittings for metal bellows expansion joints and seals. Types, main parameters and dimensions. General specifications

GOST R 51052-2002: Аutomatic water and foam fire extinguishing installations. Wet and dry systems alarm stations. General technical requirements. Test methods

GOST R 51114-97: Automatic water and foam fire fighting systems. Feeder. General technical requirements. Test methods

GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking

GOST R 51383-2012: Automatic burner gas forced air. Technical safety requirements and test methods

GOST R 51571-2000: Metal bellows expansion joints and seals. General technical requirements

GOST R 51842-2001: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods

GOST R 51843-2001: Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices. General technical requirements and test methods

GOST R 51843-2013: Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices

GOST R 51847-2009: Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners. General technical requirements and test methods

GOST R 51982-2002: Gas appliances pressure governors for inlet pressure up to 20 kPa. General technical requirements and test methods

GOST R 51983-2002: Multifunctional controls for gas burning appliances. General technical requirements and test methods

GOST R 52057-2003: Taps for gas burning appliances. General technical requirements and test methods

GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods

GOST R 52316-2005: Fire equipment. Thermal equipment trips. General technical requirements. Test methods

GOST R 52376-2005: Heat-resistant spiral-wound gaskets. Types. Main dimensions

GOST R 53287-2009: Water and foam fire fighting systems. Fire alarm hydraulic, fire foam inducer, feeder. General technical requirements. Test methods

GOST R 53326-2009: Fire equipment. Self-contained open-circuit compressed air breathing apparatus. General technical requirements. Test methods

GOST R 53634-2009: Gas-fired central heating boilers, type B boilers, of nominal heat input exceeding 70 kW, but not exceeding 300 kW. General technical requirements and test methods

GOST R 53635-2009: Gas-fired air heaters with forced convection for firing (heating) rooms not exceeding a net heat input of 100 kW. General technical requirements and test methods

GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications

GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications

GOST R 53674-2009: Pipeline valves. Nomenclature of characteristics. Check-lists for design and order

GOST R 53790-2010: Non-traditional technologies. Energetics of biowastes. General technical requirements for biogas sets

GOST R 54344-2011: Fire equipment. Mobile manipulation vehicle systems for eliminating of emergencies and fire extinguishing. Classification. General technical requirements. Test methods

GOST R 54439-2011: Gas fired central heating boilers. Type B boilers of nominal heat input not exceeding 300 kW, but not exceeding 1000 kW

GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking

GOST R 54446-2011: Non domestic gas-fired overhead luminous radiant heaters. Part 1. Safety requirements

GOST R 54448-2011: Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety requirements

GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 54821-2011: Gas-fired storage water heaters for the production of domestic hot water

GOST R 54822-2011: Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW. General technical requirements and test methods

GOST R 54823-2011: Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa

GOST R 54824-2011: Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 50 kPa

GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST R 55068-2012: Glass-fibre and basalt-fibre reinforced epoxy plastic pipes and parts of pipelines. Specifications

GOST R 55202-2012: Gas-fired mixing air heaters for heating greenhouses and similar non-domestic spaces

GOST R 55203-2012: Gas-fired air heaters with air-flue gases mixing with forced convection for heating non-domestic premises nominal heat output of up to 300 kW

GOST R 55204-2012: Non-domestic gas-fired convective air heaters, incorporating a fan to transportation of combustion air or combustion products, nominal heat output of up to 300 kW

GOST R 55206-2012: Gas/air controls for gas burners and gas burning appliances. Part 1. Pneumatic types

GOST R 55209-2012: Safety and control devices for gas burners and gas burning appliances. General requirements

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R 55622-2013: Complex security systems. Hydraulic gun carriage trunks with Remote control. General technical requirements

GOST R 55875-2013: Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of bolted flange joints

GOST R 56019-2014: Gas distribution systems. Gas pressure regulating stations. Functional requirements

GOST R EN 257-2004: Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods

IM 14-1-2004: Automation tools. Instruments for measuring and regulating the level. Directory

IM 14-4-2004: Automation. Instruments for measuring and controlling flow and quantity. Directory

IM 14-7-2004: Automation. Instruments for measuring and regulating temperature. Part 2. Thermometers, alarms, indicators, frames, temperature relays, devices are different. Nomenclature directory

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

MI 1997-89: Pressure Transducers Validation Procedures

MI 2538-99: State system for ensuring uniformity of measurements. Heat meters for water systems water supply COP ***. General metrological requirements

MI 2596-2000: State system for ensuring uniformity of measurements. Pressure transducers measuring "EJA" manufactured by "Yokogawa Sourr-Tion", Japan. Method of verification

MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices

NPB 63-97: Automatic foam fire extinguishing installations feeders. general technical requirements. test methods

NPB 83-99: Automatic water and foam fire extinguishing installations. Wet and dry system alarm stations. General technical requirements. test methods

OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,

OST 108.030.40-79: Pipe elements of hear surfaces, connecting pipes with boiler, land-type steam boiler headers. General specifications.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.454-99: Spiral wound gasket. Types and dimensions. General specifications.

OST 26.260.462-99: Devices for installation of instruments measuring the temperature for PN from 0.6 to 16 MPa. Types, design, dimensions and general technical requirements

OST 26-01-1156-75: Input-outputs of pipes with plane welded flanges of steel welded containers and devices. Design and dimensions.

OST 26-01-1157-75: Input-outputs of pipes with welded flanges in conjunction with steel welded containers and devices. Design and dimensions.

OST 26-01-1159-75: Pipe input-outputs of steel welded containers and devices. Technical requirements.

OST 26-01-1298-81: Flange of vessels and apparatuses made of titanium. Types, Design and dimensions. Strength and integrity calculation procedure.

OST 26-02-2053-79: Adapter and hatches made of double-layer steel. Technical requirements .

OST 26-02-376-78: Technological units of gas and oil industry. General technical requirements.

OST 26-07-1376-76: Ball valves. Factory length.

OST 26-07-240-71: cast steel Flange with a pin or groove weld butt joint on Roux from 1 to 64 kgf / cm2. Design, dimensions and Technical requirements .

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 34-10-425-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges. Construction and dimensions.

OST 34-10-426-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges to webbings. Construction and dimensions.

OST 34-10-428-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flanged plugs with a joggle. Construction and dimensions.

OST 34-42-668-84: Details and prefabricated units of NPP pipelines, working P<2.2 MPa (22 kg/cm2), t <= 350 °C. Flat welded flanges with a nipple. Construction and dimensions.

OST 36-141-87: free metal Flange for plastic pipes for Pnom. to 1.0 MPa. Specifications.

PB 03-108-96: Process pipeline design and safe operation rules

RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.

RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-0148306-413-88: Method for calculating fugitive emissions from gas processing plants

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements

SA 03-004-07: Calculation of the strength of vessels and apparatus

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa

SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)

ST TsKBA 065-2008: Pipe fittings. The nomenclature of indicators. Questionnaires for design and order

TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions

TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

TU 3742-001-96231033-2006: Swing check valve type 19s38nzh and 19s73nzh. Technical conditions

TU 3742-011-34390194-2003: Check valves DN 100-1400 PN 8, 0 MPa; PN 12, 5 MPa; PN 16, 0 MPa. Technical conditions

TU 3799-004-11013589-2004: Flange Isolation Joint (FIS). Technical conditions

TU 5728-006-93978201-2008: Sealing gaskets made of thermally expanded graphite (PUTG). Technical conditions

VSN 362-87: Disinfections and Etching of Pipelines

ITS 46-2019: Reducing emissions of pollutants, discharges of pollutants during storage and warehousing of goods (goods)

KPO 04.03.13-06: Catalog-list of equipment. Instruments for measuring and regulating the flow, quantity, level and composition of a substance

Manual for SNiP 3.05.04-85: Allowance for laying and installation of cast-iron, reinforced concrete and asbestos-cement water supply and sewage pipelines

RTM 26-79-72*: Application of standards of a unified system of design documentation (ESKD)

SA-03-003-07: Stressing and vibration calculation of steel industrial pipelines.

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Aviation gas turbine fuels. Method for determining thermal oxidative stability
Language: English
Price: $473.36
Hazard classification of chemical products. General requirements
Language: English
Price: $356.40
Warning labeling of chemical products. General requirements
Language: English
Price: $613.80
Safety data sheet for chemical products. General requirements
Language: English
Price: $121.77
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!