GOST 22536.9-88
ГОСТ 22536.9-88
|
|
Carbon steel and unalloyed cast iron. Methods for determination of nickel
Сталь углеродистая и чугун нелегированный. Методы определения никеля
Status: Effective - Supersedes. IUS 12-1988 The limitation of effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard establishes photometric, gravimetric and atomic absorption methods for the determination of nickel.
Стандарт устанавливает фотометрический, гравиметрический и атомно-абсорбционный методы определения никеля.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
8/25/1988
SKU: RUSS17376
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.01 Ferrous metals in general »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.01 Ferrous metals in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V09 Test methods. Packaging. Marking »
National Standards for OKSTU »
CAST IRON, FERRO ALLOYS, STEEL »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 22536.9-77: Carbon steel and unalloyed cast iron. Methods for determination of nickel content
The Document References:
GOST 11125-84: Super pure nitric acid. Specifications
GOST 13610-79: Iron carbonyl for radiotechnical uses. Specifications
GOST 14261-77: Hydrochloric acid super pure. Specifications
GOST 18300-72: Technical rectified ethyl alcohol. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 19522-74: Ammonium Rodanist technical. Technical conditions
GOST 20478-75: Reagents. Ammonium persulphate. Specifications
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.9-77: Carbon steel and unalloyed cast iron. Methods for determination of nickel content
GOST 24364-80: Organic dyestuffs. Disperse yellow 3. Specifications
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3652-69: Reagents. Citric acid monohydrate and anhydrous. Specifications
GOST 3760-79: Reagents. Ammonia water. Specifications.
GOST 4160-74: Reagents. Potassium bromide. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4457-74: Reagents. Potassium bromate. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications
GOST 5817-77: Reagents. Tartaric acid. Specifications
GOST 5828-77: Reagents. Dimethylglioxime. Specifications
GOST 5845-79: Reagents. Potassium-sodium tartrate 4-aqueous. Specifications
GOST 849-70: Primary nickel. Specifications
The Document is Referenced By:
GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications
FTS ZhT TsT 028-99: Brake block holders of the locomotives for main-line railways. Certification requirements
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10543-82: Surfacing steal wire. Specifications
GOST 10543-98: Steel surfacing wire. Specifications
GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 1071-81: Heat treated steel spring wire
GOST 10791-2004: All-rolled wheels. Specifications
GOST 10791-2011: All-rolled wheels. Specifications
GOST 10791-89: Solid rolled wheels
GOST 11474-76: Bent-steel sections. Specifications
GOST 11850-72: Steel wire for spring washers
GOST 1215-79: Malleable iron castings
GOST 13663-86: shaped steel pipes technical requirements
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 1435-74: Non-alloyed tool steel. Specification
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 15146-69: Thermal-treated steel tape for musical instrument reeds. Specifications
GOST 1577-2022: Heavy-gauge plates and wide strips of structural quality steel. Technical specifications
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 1585-85: Bearing cast iron for molding
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications
GOST 17584-72: Cast iron joining rings and fittings for asbestos cement pressure pipes
GOST 19281-2014: High strength rolled steel. General specification
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21357-87: Castings made of cold- and wear- resistant steel
GOST 21996-76: Cold-rolled heat treated steel-cord belt
GOST 21997-76: Steel flattened strip of high strength
GOST 2246-70: Welding steel wire. Specifications
GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 2284-79: Cold-rolled carbon structural steel strip
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 24244-80: Cold-rolled soft thin sheet steel for enameled utensils
GOST 27772-2015: Structural steel structure rolled products. General specifications
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 2787-2019: Ferrous metals are secondary. General specifications
GOST 30136-95: Carbon steel rod of ordinary quality. Technical specifications
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 30565-98: Hot-rolled steel shapes for machine-Building in chemical engineering and oil industry. General specifications
GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests
GOST 31443-2012: Steel pipes for crafts pipelines. Specifications
GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications
GOST 32409-2013: Spring anchors to railway rails. Technical specification
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 32931-2015: Profile steel pipes for metal constructions. Specifications
GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C
GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications
GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications
GOST 34450-2018: Details and assembly units of coupling and automatic coupling devices of railway rolling stock. Test methods
GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
GOST 34636-2020: Pipe billet. General specifications
GOST 380-2005: Common quality carbon steel. Grades
GOST 380-88: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 398-2010: Rough tyres for railway rolling stock. Specifications
GOST 398-81: Carbon steel tires for rolling stock for broad gauge railways. Technical requirements
GOST 398-96: Carbon steel tires for broad gauge railroads and subway rolling-stock
GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions
GOST 4041-71: Rolled plates of high quality structural steel for cold stamping
GOST 4121-96: Crane rails. Specifications
GOST 4491-2016: Cast centers of wheels for railway rolling stock. General specifications
GOST 4491-86: Cast wheel centers for the 1520 mm-gauge railroad rolling stock
GOST 4728-2010: Axle billets for railway rolling stock. Specifications
GOST 4728-89: Shaft blanks for the rolling stock of the railroads with 1520 mm wide track
GOST 4728-96: Axle billets for the railway rolling stock of 1520 mm gauge
GOST 503-81: Cold-rolled low-carbon steel strip. Specifications
GOST 5257-89: Rough carbon steel tires for tramway rolling stock
GOST 5257-98: Rough carbon steel tyres for tramway rolling stock. Specifications
GOST 5267.0-90: Hot-rolled sections for car building. General specifications
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5437-85: Reed wire
GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
GOST 5521-86: Weldable steel for shipbuilding
GOST 5521-93: Shipbuilding rolled steel
GOST 6713-75: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 7370-2015: Railway frogs. Specifications
GOST 7370-86: Railway frogs of types R75, R65 and R50
GOST 7524-2015: Steel grinding balls for ball mills. Specifications.
GOST 803-81: Hot-rolled strips of carbon high-grade steel for plating
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 977-88: Steel castings. General specifications
GOST R 51045-2014: Rails of ways technological railways transport. General specifications
GOST R 51245-99: Steel universal drill rods. General specifications
GOST R 51682-2000: Casing and coring tubes for geology-exploring drilling. Specifications
GOST R 51685-2000: Railway rails. General specifications.
GOST R 51685-2013: Railway rails. General specifications.
GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications
GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications
GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods
GOST R 53866-2010: Crane rails. Specifications
GOST R 53932-2010: Tube billet. General specifications
GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 55185-2012: Parts and assembly units of coupler and automatic coupler devices of railway rolling stock. Test methods
GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications
GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C
GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications
GOST R 55820-2013: Switch and crossing rails. Specifications
GOST R 55941-2014: Grooved rails. Specifications
GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures
RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements
RD 34.40.601-97: Procedural Guidelines for Inspection of Hot Water Storage Tanks
RD RTM 26-366-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Spectral methods of steel analysis
ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification
ST SSFZhT TsT 052-99: Shoes and brake pads for locomotives running on main railways. Standard testing method.
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions
ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements
TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions
TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC
TU 14-159-1128-2008: Steel and seamless hot-deformed cold-resistant pipes for gas pipelines of gas-lift systems and arrangement of gas fields
TU 14-2-767-88: Hot-rolled steel strip with improved quality. Technical conditions
TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
TU 14-3-587-77: Seamless hot-rolled pipes of steel grade 20 for the refining industry
TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions
TU 14-3R-44-2001: Seamless hot-deformed steel pipes for oil and gas pipelines. Technical conditions
TU 14-3R-50-2001: Steel pipes, seamless, hot-rolled, thick-walled, of cast ingot
TU 14-3R-51-2001: Seamless steel pipes, hot-rolled, thick-walled for mechanical engineering
TU 14-3R-53-2001: Seamless mechanically machined steel pipes for steam pipelines
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.